The Team Losi Racing 22 5.0 DC Race Roller 1/10 2WD Electric Buggy Kit was assembled to TLR Race Team’s Factory specifications, creating a 1/10 scale 2wd Buggy that will get any racer off on the right foot and racing for the podium.This factory built race roller chassis allows new drivers to go racing in less time. Just add your preferred electronics, tires, and paint to make this race roller as unique as you. The 22 5.0 DC Race Roller has a combination of features second-to-none including low maintenance gear differential, G3 12mm big bore shocks, revamped steering geometry, and so much more. No matter if the terrain is dirt or clay, the 22 5.0 DC Race Roller is at home on the racetrack and poised for the podium.
NOTE: Finished model is shown for illustrative purposes only. See Needed to Complete list below for a listing of items required to complete the model.
Features:
Pre-Assembled Race Roller
Low Maintenance Gear Differential
Adjustable Rear Hubs and Inner Rear Pivots
G3 12mm Big Bore Shocks
Revamped Steering Geometry
Super Heavy Duty Slipper (SHDS)
2.0 Milled Aluminum Chassis
22 5.0 Body
TLR Front Wing Included
Diff Height Adjustment
Front Roll Center Adjustment
3-position Front Camber Block
New Battery Hold Down
Optimized Composites
TLR 6.5" Rear Wing
Built-In Motor Fan Mount
Laydown Configuration
All Metric Hardware
Specifications:
Charger: Sold Separately
Completion Level: Kit
Front Track: 9.8" (248.5mm)
Gear Ratio: 2.43:1
Rear Track: 9.8" (248.5mm)
Shock Type: Oil-filled
Suspension: Lower A-Arm, Upper Adjustable Link
Ball Bearings: Full set, rubber sealed
Gear Pitch: 48P
Wheelbase: 11" (279 mm)
Servos: Sold Separately
Drivetrain: 2WD
Vehicle Type: Buggy
Scale: 1/10
Chassis: 0.078" (2mm) thick aluminum
Spur Gear: 72T, 78T
Battery: Sold Separately
Differential: Metal gear, adjustable height
Product Width: 9.8" (249 mm)
Body: 22 5.0 cab forward, 0.7mm thick
Power Type: Electric
Product Length: 15" (381 mm)
Receiver: Sold Separately
Approximate Assembly Time: 1-3 hours
Product Height: 5.8" (147 mm)
Radio: Sold Separately
Includes:
1/10 22 5.0 DC Race Roller
Product Manual
Needed to Complete:
Radio System
Motor
Electronic Speed Control
Servos
1/10 Buggy Tires, Inserts & CA Glue
LiPo Battery
Charger
Sticky Kicks RC is pleased to announce our New Superdialed Five Star Titanium Screw Sets! Made of Super Strong and Lightweight Grade 5 Titanium. Complete Upper Kits for the Popular 2WD Buggies.
Product Details
Grade 5 Deep Socket Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBITY:
TLR 22X-4
The Team Losi Racing 22X-4 2.5mm Carbon Fiber Chassis is the best way to shave weight and make your buggy handle better. Using this chassis will allow for a 38-40g weight savings over the aluminum chassis. By removing this weight you will allow the 22X-4 to accelerate harder, stay flatter, brake quicker, land flatter and be all around faster. Package includes one carbon fiber chassis.
Features:
Make your buggy handle better, stay flatter, accelerate harder, brake quicker, land smoother, and just go flat-out faster
Allow a weight savings of 38-40g
Includes the front chassis kick up in the carbon plate so no extra weight is added back on
Super clean carbon fiber look
COMPATIBILITY:
Losi 22X-4
This is an optional Team Losi Racing 8IGHT-X Aluminum 20 Deg Spindle Carrier Set, intended for use with the 8IGHT-X Elite 1/8 Buggy. These parts are machined out quality aluminum an hard anodized for longer wear.
COMPATIBILITY:
Losi 8IGHT XT/XTELosi 8IGHT-XLosi 8IGHT-X EliteLosi 8IGHT-X/E 2.0Losi 8IGHT-XE Race
Team Losi Racing 123mm Assembled Rear Shock Set with 37.5wt Shock Oil. This optional set of rear shocks come preassembled and only require to be filled with the included oil. Featuring shock boots, red shock springs, bleeder style shock caps and aluminum shock collars to provide an almost race ready setup. Package includes two assembled rear shocks, one tube of shock oil and two plastic shock tools intended for the Team Losi Racing 8IGHT-X, 8IGHT-X Elite, 8IGHT-XE and 8IGHTXT/XTE.
COMPATIBILITY:
Losi 8IGHT XT/XTE
Losi 8IGHT-X
Losi 8IGHT-X Elite
Losi 8IGHT-XE Race
Sticky Kicks RC is pleased to announce our New Hi-Perfomance Five Star Ceramic Bearing Kits for 1/10th Scale 2WD Cars. Keep that Bearing Game #superdialed.
Product Details
Fits Current Team Associated, Losi and X-Ray 1/10th 2WD Racing Kits
Lowest Resistance Fastest Rolling Bearings Available
Grade 5 Ceramic and Extremely Lightweight
COMPATIBILITY:
X-RAY XB4 2021
This is an optional Team Losi Racing Complete Ball Differential with Tungsten Balls. This ball diff is a direct replacement for the entire 22 family of vehicles. The Team Losi Racing Tungsten Ball Diff is a great way to upgrade a RTR kit with a smooth, high performance, race proven diff that will provide immediate results that will show up in your lap times. Tungsten diff balls will create smoother differential action and increase the life span of the diff, keeping you on the track longer. This can also be beneficial for racers to have on hand as a spare part, allowing quick diff replacement, rather than needing to rebuild the existing diff. Includes all the parts needed to build one differential, as well as one tube of diff grease, and one tube of black grease.
Features:
Compatible with all 22 series vehicles
Great upgrade for 22 RTR vehicles
Tungsten Carbide Diff and Thrust Balls provides a smoother diff and longer life
All parts included to build a complete diff
Improve lap times
COMPATIBILITY:
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22-4 2.0
Losi 22SCT 2.0
Losi 22SCT 3.0
Losi 22T 2.0
Losi 22T 3.0
Losi 22T 4.0
Sticky Kicks RC is pleased to announce our New Hi-Perfomance Five Star Ceramic Bearing Kits for 1/10th Scale 2WD Cars. Keep that Bearing Game #superdialed.
Product Details
Fits Current Team Associated, Losi and X-Ray 1/10th 2WD Racing Kits
Lowest Resistance Fastest Rolling Bearings Available
Grade 5 Ceramic and Extremely Lightweight
COMPATIBILITY:
X-RAY XB2CD 2021
Team Losi 8IGHT-T E 3.0 Clear Body. This body is pre-trimmed with overspray film applied, and includes a sticker sheet and window masks.
Losi 8IGHT-T E 3.0
This is a replacement set of two Team Losi Racing 8XT Universal Driveshafts, intended for use with the Team Losi Racing 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kit.
COMPATIBILITY:
Losi 8IGHT XT/XTE
This is a replacement Team Losi Racing 8XT Rear Shock Tower, intended for use with the Team Losi Racing 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kit.
COMPATIBILITY:
Losi 8IGHT XT/XTE
This is a replacement Losi Motor Mount with Adapter, and is intended for use with the Losi TEN-SCTE
COMPATIBILITY:
Losi TEN Rally X
Losi TEN-SCBE
Losi TEN-SCTE
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
This is an optional Team Losi Racing 22x-4 Front and Rear Complete Metal Diff, intended for use with the 22X-4 1/10 4WD Buggy Race Kit.
COMPATIBILITY:
Losi 22X-4Losi 22X-4 Elite
This is a replacement Team Losi Racing 8XT Front Shock Tower, intended for use with the 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kit.
COMPATIBILITY:
Losi 8IGHT XT/XTE
This is a replacement Team Losi Racing 22 5.0 Adjustable "C & D" Pivot Set, intended for use with the 22 5.0 DC Elite 1/10 2WD Electric Buggy Kit.
COMPATIBILITY:
Losi 22 5.0 ACLosi 22 5.0 DCLosi 22 5.0 SR
This is a replacement Team Losi Racing 8XT Rear Differential Ring and Pinion Gear, intended for use with the Team Losi Racing 8IGHT-XT/XTE 1/8 Nitro/Electric 4WD Off-Road Truggy Kit.
COMPATIBILITY:
Losi 8IGHT XT/XTE
This is a replacement Team Losi Racing SCTE Conversion Carbon Rear Shock Tower, intended for use with the optional Team Losi Racing SCTE to 22 Shock Conversion Set (TLR334029).
Features:
Rear shock tower is the replacement part for TLR334029 Shock Conversion Set, SCTE to 22: SCTE 2.0. Will not work correctly with TEN series shocks
Offers additional low rear camber link adjustments. Shock mounting positions have been adjusted for use with the 22 shock lengths
Made from super strong and very light Carbon Fiber for ultimate strength and lightweight performance
COMPATIBILITY:
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
This is a Team Losi Racing 22T 2.0 Complete CVA Driveshaft Set. Package includes all the parts needed to build two complete driveshafts, as well as a tube of blue thread lock and two aluminum spacers.
The TLR 22X-4 Complete Metal Center Gear Differential Set is a tuning option that replaces the stock center slipper system, with a tunable fluid filled gear diff. Package includes all the parts needed to build one gear differential, as well as 78 and 81 tooth spur gears, and a bottle of silicone diff fluid.
This is a replacement Team Losi Racing 8IGHT-XE 1/8 Electric Buggy Body. This body comes clear and requires polycarbonate paint, but it is pre timmed. Window masks and decals included.
Losi 8IGHT-XE Race
This is a optional RCScrewz Stainless Steel screw kit for the Team Losi Racing 8IGHT-XE. RCScrewz Stainless Screw Kits are 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit. All RCScrewz Kits include:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the these kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations. The Following parts are not included in this screw kit due to being either patent pending and/or are pin/barrel shanked/screw pins (TLR244044, TLR245000, TLR241040 & TLR245005).
This is a optional RCScrewz Stainless Steel Screw Kit for the Team Losi 22-4 2.0. RCScrewz Stainless Screw Kits are 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.All RCScrewz Kits include:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the these kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations.
This is a optional RCScrewz Stainless Steel screw kit for the Losi 22X-4 Buggy. This 240+ piece screw kit is 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.
Includes:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case.
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the these kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations. Specialty / Patent Pending parts are not included (ex: #TLR244044 suspension/hinge pins threaded, #TLR245005 barrel/location screw pins,).
Introducing the all-new Axis T series of race bodies for 1:8 Truck, a clean-sheet design from Pro-Line bringing a fresh new look to the class. Designed with the latest in CAD technology, the Axis T features a low-slung design with sharp lines throughout giving it an unmistakable look on the track. The Axis is a cab-forward design that provides enhanced steering response while the side ridges balance out the rear of the car with ideal side-bite. The rear of the Axis body has the right amount of clearance for the motor and electronics and fits over the front shock tower of your race truck perfectly.
Proudly Made in the USA, the Axis is made from durable polycarbonate material that will give you an edge over the competition. Paint-then-peel overspray film, window masks, and Pro-Line decals are included with the body. Hit the track in fresh, Pro-Line style with the all-new Axis race body!
This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.
Features:
Designed with the Latest in CAD Technology
Super Low-slung Design with Sharp Lines Throughout
Enhanced Steering Response Combined with Ideal Side-Bite
Fits your Race Truck Perfectly
Paint-then-peel Overspray Film Included
Made with Crystal Clear Polycarbonate
Made in the USA, since 1982
Four steps to Race Ready:
Clean Body and apply included window mask
Paint then peel the over-spray film off
Sticker your body (decal sheet included)
Mount your new body onto your Truggy
Fits:
for TLR® 8ight-XT™ & 8ight-XTE™
What's Included:
Axis T Clear Body for TLR® 8ight-XT™ & 8ight-XTE™ (1 pc)
Window Masks
Decal Sheet
Specifications
Material: Polycarbonate
Product Height: 5" (127 mm)
Vehicle Type: Truggy
Wheelbase: 14.7" (373 mm)
Product Length: 18" (457 mm)
Product Width: 7.5" (191 mm)
Scale: 1/8
Track: Off-Road
Length: 18.0" (457mm)
Width: 7.5" (191mm)
Height: 5" (127mm)
Wheelbase: 14.7" (373mm)
The Proline RC10T6.2/Losi 22T 4.0 Axis ST 1/10 Stadium Truck Body. Featuring a low profile design that gives sharp lines throughout making for an aggressive looking truck. The cab-forward design that provides an enhanced steering response to get you around the track faster than ever. The rear of this Axis body has the right amount of clearance for running the rear shocks either in the front or the back of the shock tower.Features:
Designed with the Latest in CAD Technology
Super Low-slung Design with Sharp Lines Throughout
Enhanced Steering Response Combined with Ideal Side-Bite
Fits both the TLR 22T 4.0 & AE T6.2 Race Trucks
Paint-then-peel Overspray Film Included
Made with Crystal Clear Polycarbonate
Made in the USA, since 1982
Specifications:
Product Width: 5.5" (140 mm)
Wheelbase: 11.1" (282 mm)
Vehicle Type: Stadium Truck
Product Height: 4.3" (109 mm)
Product Length: 15.3" (389 mm)
Material: Polycarbonate
Scale: 1/10Includes:
(1) Axis ST Clear Body for TLR 22T 4.0 & AE T6.2
(2) Wings
(1) Decal Sheet
(1) Window Masks Sheet
Wing Mounting Hardware
This is an optional Team Losi Racing 22X-4 Aluminum VHA Hub Set, intended for use with the 22X-4 1/10 4WD Buggy Race Kit. These hubs are machined from quality aluminum and anodized black with shiny silver chamfered edges.
This is a replacement Team Losi Racing Carbon Front Shock Tower, and is intended for use with the Team Losi Racing TEN-SCTE 2.0 1/10 scale 4WD short course truck.
COMPATIBILITY:
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
This is an optional Team Losi Racing Bell Crank Steering System. During their extensive testing, TLR found a distinct advantage to a bell crank system for the Team Losi Racing 22 platform vehicles (22, 22 2.0, 22SCT, & 22SCT 2.0). The bell cranks create less Ackermann throughout the turning throw making the vehicle less aggressive off-center and adding steering low speed with a greater outside wheel angle.
This is a directly bolt on for all 22 platform vehicles and includes ALL parts required including a 22 2.0 and 22SCT specific spindle and an M3.5 x 50mm HD Turnbuckle (22, 22 2.0) to convert your TLR vehicles.
NOTE: This bell crank system can work with the 22T as well, but it does not use the updated sprindles and requires TLR6065 Turnbuckles, 22SCT as well.
Features:
Reduced Ackermann - The bell crank steering system provides a reduced amount of Ackermann throughout the turning throw making the vehicle less aggressive off-center and adding steering lower speed due to an increased outside wheel angle
No Modification Required - The Bell Crank Steering System will install onto the TLR 22, 22 2.0, 22SCT, or 22SCT 2.0 without any modifications to the front bulkhead, servo mounts, or servo location
Ball Bearing Steering - The bell cranks mount to ball bearings for super quicker and responsive steering movement without any parts that can wear out prematurely
Ackermann Adjustability - The steering tie-rod ball studs are parallel to the kick plane, allowing for adjustment to the Ackermann range by adding or removing ball stud washers for fine tuning of the steering response and feel
Everything to make the conversion to the Bell Crank Steering System is included
COMPATIBILITY:
Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22 4.0 SPEC-Racer
Losi 22SCT 2.0
Losi 22SCT 3.0
Losi 22T
Losi 22T 2.0
Losi 22T 3.0
Losi 22T 4.0
Pro-Line Positron 2.2" Rear Buggy Pre-Mounted Tires. The Positron is the standard when it comes to buggy rear tire performance on indoor tracks. Designed from the ground up with a unique carcass shape and futuristic directional tread design, the Positron delivers true next-generation performance with improved grip and corner speed on indoor clay tracks. The Positron is directional, which adds another tuning option for the racers always looking for that extra edge since it will perform differently depending on which direction it is run.
Pre-Mounted by the pros at Pro-Line to get you out on the track faster than ever!
Pro-Line has you covered with lightweight and durable rear racing wheels for 1:10 Buggies. This Wheel features the latest in style and performance that will make your buggy look good racing around the track. The wheels feature a reversed dish design that protects the nut and axle from damage during collisions and brings an awesome look to your buggy.
Features:
Tires:
Pre-Mounted by the Pros at Pro-Line
Futuristic Directional Tread Design
Angled Connected Bars for Maximum Forward Bite & Unmatched Corner Speed
Improved Tire Wear Over Previous Race Tires
Tune Performance by Choosing Tire Direction
Outlast the Competition
Made in the USA, since 1982
Wheels:
Ultra-lightweight Design
Latest in Wheel Styling and Performance
Made from Durable Nylon Material
Available in White and Yellow
Made in the USA, since 1982
Specifications:
Height: 3.33" (85mm)
Width: 1.67" (42mm)
Includes:
(2) Positron 2.2" Buggy Rear Tires Mounted on Buggy Rear Wheels
COMPATIBILITY:
Kyosho Lazer ZX-5Kyosho Lazer ZX-6Kyosho Lazer ZX-6.6Kyosho Ultima RB5Kyosho Ultima RB6Losi 22Losi 22 2.0Losi 22 3.0Losi 22 3.0 SPEC-RacerLosi 22-4Losi XXX-4Serpent Spyder SRX-2 MMSerpent Spyder SRX-2 RMSerpent Spyder SRX-4Team Associated RC10 B4.1Team Associated RC10 B4.2Team Associated RC10 B44.1Team Associated RC10 B44.2Team Associated RC10 B44.3Team Associated RC10 B5Team Associated RC10 B5MTeam Associated RC10 B5M Factory LiteTeam Associated RC10 B64Team Associated RC10 B64DTeam Associated RC10 B6DTeam Associated RC10 B74Team Associated RC10 B74.1D
Pro-Line Electron 2.2" 4WD Front Buggy Pre-Mounted Tires, mounted on Yellow front buggy wheels for the TLR 22X-4 & XRAY XB4 Buggies. The Electron is the standard when it comes to 2wd front tire performance on indoor tracks. The Electron features connected tire tread technology to improve traction and wear on even the most abrasive of indoor track conditions. The square center pins laid out between the connected tread provide consistent forward and side bite even when the track gets dusty.
Pre-Mounted by the pros at Pro-Line to get you out on the track faster than ever!
Pro-Line wheels for the TLR 22X-4 & XRAY XB4 Buggies feature the latest in style and performance that will make your buggy look good racing around the track. The wheel is stiffer than stock for a more precise feel and will spin true for exceptional performance.
Features:
Tires:
Pre-Mounted by the Pros at Pro-Line
Connected Tire Tread Technology
Perfect Tire for Indoor Abrasive Surfaces
Improved Traction and Wear
Consistent Forward and Side Bite
Precision Steering and Corner Speed
Includes Closed Cell Foam Inserts
Made in the USA, since 1982
Wheels:
Ultra-lightweight Design
Latest in Wheel Styling and Performance
Stiffer Than Stock for a More Precise Feel
Spins True for Exceptional Performance
Made from Durable Nylon Material
Available in Yellow and White
Made in the USA, since 1982
Specifications:
Height: 3.30" (84mm)
Width: 1.26" (32mm)
Includes:
(2) Electron 2.2" Buggy Front Tires Mounted on TLR® 22X-4™ & XB4 Wheels
COMPATIBILITY:
Losi 22X-4XRAY XB4 2020XRAY XB4 2021 CarpetXRAY XB4 2021 Dirt
The Pro-Line TLR 8ight-XE Axis 1/8 Electric Buggy Body was designed using the latest in CAD technology, and features a super low-slung design with sharp lines throughout giving it an unmistakable look on the track. The Axis is a cab-forward design that provides enhanced steering response while the small side fins balance out the rear of the car with ideal side-bite. The rear of the Axis body has the right amount of clearance for the motor and electronics and fits the chassis and bulkhead shape of your race buggy perfectly. To run the Axis body on the 8ight-XE electric buggy, the battery must be no taller than 39mm due to the low-slung nature of the Axis side pods.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features:
Designed with the Latest in CAD Technology
Super Low-slung Design with Sharp Lines Throughout
Fits TLR® 8ight-XE™ Electric with LCG 4S Battery
Enhanced Steering Response Combined with Ideal Side-Bite
Fits your Race Buggy Perfectly
Paint-then-peel Overspray Film Included
Made with Crystal Clear Polycarbonate
Made in the USA, since 1982
Includes:
(1) Axis Clear Body for TLR® 8ight-XE™
Window Masks
Decal Sheet
COMPATIBILITY:
Losi 8IGHT-XE Race