Losi Mini Parts

9 products

  • Last stock! Losi Mini-T 2.0 Aluminum Front Camber Block (Black)

    Losi Mini-T 2.0 Aluminum Front Camber Block (Black)

    1 in stock

    The Losi Mini-T 2.0 Aluminum Front Camber Block is a machined aluminum option for the Mini-T 2.0 trucks. CNC machined, and anodized black with silver chamferred edges, this part will add strength and a custom look to your Mini T 2.0. Package includes aluminum front camber block and ball studs. COMPATIBILITY: Losi Mini-BLosi Mini-T 2.0

    1 in stock

    $19.99

  • Losi Mini-T 2.0 Front Bulkhead & Brace Losi Mini-T 2.0 Front Bulkhead & Brace

    Losi Mini-T 2.0 Front Bulkhead & Brace

    5 in stock

    The Losi Mini-T 2.0 Front Bulkhead & Brace is a replacement for the Mini-T 2.0 trucks. Package includes one front bulkhead and two front braces. Losi Mini-T 2.0 LOS211011

    5 in stock

    $6.99$5.99

  • Last stock! Losi Mini-T 2.0 Aluminum Servo Arm

    Losi Mini-T 2.0 Aluminum Servo Arm

    1 in stock

    This is an optional Losi Mini-T 2.0 Aluminum Servo Arm, intended for use with the Mini-T 2.0 1/18 RTR 2wd Stadium Truck. COMPATIBILITY: Losi Mini JRX2Losi Mini-BLosi Mini-T 2.0

    1 in stock

    $9.99

  • Last stock! Losi Mini-T 2.0 Slingshot drag chassis conversion kit Losi Mini-T 2.0 Slingshot drag chassis conversion kit

    Losi Mini-T 2.0 Slingshot drag chassis conversion kit

    1 in stock

    Based on our top shelf Mini Late Model conversion for the Losi Mini-T 2.0. This chassis extends the wheelbase on the car even further. It's slimmed down for an in-line battery placement for balanced center mass. It was designed as a "drag" car but might be fun on a road course as well (we haven't tried that yet).The Slingshot was designed with Tamiya M-Chassis Mini (M03, M05, M06, M07, M08) bodies in mind. They are almost a perfect fit width wise (tires will stick out ever so slightly). Those familiar with the Mini scene know they have bodies available in three wheelbase options (210mm, 225mm, and 237mm). For our conversion, we're only offering the 210mm and 225mm options as they are the most popular and we think the 237mm may be a bit much. This should provide more than enough body options.This will be a more specialized offering than our oval kit (smaller runs, less included in base kit due to extreme variety that might be needed to accommodate users desired body). It will be sold WITHOUT a bumper, rear body mount extension, and body posts. Most will be available as add-ons when configuring your kit. The pictured wheelie bar on the 225mm kit is also not included, and is currently in the prototype stage.Cars shown are also running Tamiya M-Chassis tires (Sweep Racing slicks in super soft compound on Tamiya wheels). To mount these, you need the optional 8mm to 12mm hex adapters. Flanged wheel nuts are also recommended.What's included in the kit:Lower Chassis Plate (210mm or 225mm wheelbase)Rear Body Mount w/ 5mm through-hole for easy adjustability2x Chassis Brace spacersKickup wedgeBrass Chassis spacerBrass side rails w/ screwsBattery brackets with built-in PureTech Products velcro strapAll necessary hardwareOptional add-ons:Front BumperRear body post extensionBody posts8 to 12mm Hex AdaptersWheelie barElectronics mounting may be tricky, as space will be limited. We are working on a printed waterfall part that would offer an esc mounting plate on top.We also include 1/8" thick brass chassis siderails that act as both chassis weight and stiffeners. This is only offered in one length for both chassis options. For the 210mm, they run the entire length from front to rear of the chassis. On the 225mm, they can be positioned either fully forward or fully backward (about an inch difference).Lipo length will be limited on the 210mm wheelbase version, with a little more flexibility in the 225mm version. The battery brackets are 35mm wide and should fit most size lipos in this scale. If a battery doesn't fit within that width, you could trim off the ends of the braces or just not run them at all - the chassis still has holes for strapping tape.The battery brackets, kickup wedge, and rear body mount are all 3D printed parts (carbon infused polycarbonate). As such, the fit and finish may vary slightly from the photos. Due to the nature of 3D printing, items may contain minor visual blemishes. The battery brackets, kickup wedge, and rear body mount all include threaded brass inserts so the included m2 hardware will have a firm hold on the part and you do not have to worry about the screws pulling out of the plastic.If you have any questions, PLEASE DO NOT HESITATE TO ASK.Note: Car in photos is pictured with optional carbon fiber shock towers. These are NOT included in the base conversion kit.

    1 in stock

    $69.99

  • Losi Mini-T 2.0 Bellcrank Set

    Losi Mini-T 2.0 Bellcrank Set

    5 in stock

    The Losi Mini-T 2.0 Bellcrank Set is a replacement for the Mini-T 2.0 trucks. Package includes steering bellcrank components and hardware.

    5 in stock

    $9.99

  • Losi Mini-T 2.0 Shock Standoff Bushing

    Losi Mini-T 2.0 Shock Standoff Bushing

    5 in stock

    The Losi Mini-T 2.0 Shock Standoff Bushing set is a replacement for the Mini-T 2.0 trucks. Package includes two shock standoffs and two shock cap bushings. COMPATIBILITY: Losi Mini-B Losi Mini-T 2.0

    5 in stock

    $7.99$6.99

  • Last stock! Hack Fab 2.0 MLM Conversion Replacement Screw Bag for Losi Mini-T

    Hack Fab 2.0 MLM Conversion Replacement Screw Bag for Losi Mini-T

    1 in stock

    Product Details This is a bag of replacement screws for the late model, omni and other Losi Mini conversions we offer. It includes: 2x6mm countersunk screws 2x10mm countersunk screws 2x14 cap screws 4-40 button and countersunk screws 4-40 locknuts  

    1 in stock

    $7.99

  • Last stock! RC Screwz Losi Mini-T 2.0 2wd Stainless Steel Screw Kit

    RC Screwz Losi Mini-T 2.0 2wd Stainless Steel Screw Kit

    1 in stock

    This is an optional RCScrewz Stainless Steel screw kit for the Losi Mini-T 2.0 2wd. This 80+ piece screw kit is 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason you're not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit. All RCScrewz Kits include: All socket screws + Extras Button Screws + Extras Flat Head Screws + Extras Set Screws + Extras Nuts + Extras Washers + Extras Bonus Short Arm hex Wrenches Quality Reusable plastic pit case General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the the kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of RC Screwz field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations.

    1 in stock

    $29.95

  • Losi Mini-T 2.0 Outdrive & Gear Set

    Losi Mini-T 2.0 Outdrive & Gear Set

    2 in stock

    The Losi Mini-T 2.0 Outdrive & Gear Set is a replacement for the Mini-T 2.0 trucks. Package includes two outdrive/sun gear halves, and three planetary gears. COMPATIBILITY: Losi Mini-BLosi Mini-T 2.0

    2 in stock

    $16.99

Login

Forgot your password?

Don't have an account yet?
Create account