This is an Arrma 46T Center Diff Set, intended for use as a replacement for the BigRock, Felony and Infraction kits and as an optional part for the Kraton, Limitless, Mojave, Notorious, Outcast, Talion and Typhon kits.
Features:
Factory assembled and filled with 100k cSt silicone oil for fast and efficient servicing
Tough steel internal gears for long-lasting durability in all conditions
Strong composite diff case
46T steel spur gear for increased durability under extreme loads
Metal Cross Shafts and inserts for increased efficiency of fit and long-lasting durability
Includes bearings for fast and efficient fit to your vehicle
Includes:
(1) Factory Assembled Center Diff (46T Steel Spur and 100k cSt Silicone Oil)
COMPATIBILITY:
Arrma Felony 6S BLXArrma Infraction 6S BLXArrma Infraction V2 6S BLXArrma LimitlessArrma Mojave 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLXArrma Typhon 6S BLX
This is a replacement Arrma SWB (Short Wheel Base) Aluminum Typhon Black Chassis, intended for use with the Typhon 6S BLX Brushless RTR 1/8 4WD Blue and Silver Buggy. This Aluminum Chassis, in Short Wheelbase configuration, is the perfect replacement for your kit item.
Features:
Precision manufactured aluminium for reduced vehicle weight and reliable hardware fitting
Precision manufactured hardware mounting holes for fast and easy servicing
Anodised black for cool looks and increased durability
Integrated droop setting plates for advanced tuning options in minutes
Designed to provide the perfect balance of strength and consistent handling characteristics for your vehicle
COMPATIBILITY:
Arrma Outcast 6S BLX
Arrma Senton 6S BLX
Arrma Typhon 6S BLX
OVERVIEW:
This Front/Rear 43T Spiral Diff Set provides replacement parts for servicing your Diff assembly.
FEATURES:
Super-tough steel Crown, Planetary and Satellite Gears for long-lasting durability in all conditions - Super-strong Diff Case for increased durability under extreme loads - Precision manufactured Screw threads for fast and easy servicing - Precision manufactured Gear Teeth for consistent performance at high speeds - Specially designed Diff Case Insert for increased strength and durability - Metal Cross Shafts for increased efficiency of fit and long-lasting durability
INCLUDES:
1 x Differential Case
1 x Diff Case Insert
4 x 10T Satellite Gears
2 x Metal Cross Shafts
2 x Planetary Gears
2 x F/R Diff Outdrives
2 x Diff Pin - 2.25 x 9.8mm
2 x Silicone O-rings
1 x Diff Gasket
4 x Satellite Gear Shims
4 x Metal Cross Shaft Insert
1 x 10T Input Shaft
1 x 43T Spiral Diff Crown Gear
4 x Button Head Screws M3 x 12mm
1 x Set Screw M4 x 3mm
COMPATIBILITY:
Arrma Mojave 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
OVERVIEW:
This Metal Diff Case set contains all the parts required to upgrade a plastic cased differential. Manufactured from lightweight, durable aluminum and hard wearing steel, this set adds strength and durability to the differentials of your model.
FEATURES:
Anodized aluminum diff case and hard wearing steel diff case face plate for increased durability - Precision manufactured for reliable fit - Set includes diff gaskets, gear shims and screws required for diff rebuild
INCLUDES:
1 x Aluminum Diff Case Body
1 x Steel Diff Case Face Plate
2 x Diff Gaskets
4 x Gear Shim
8 x M3 x 8mm Button Head Screw
REQUIRES:
This set can be used to convert AR220029 - CENTRE DIFF SET 50T (1pc), AR220041 - F/R DIFF SET 43T SPIRAL (1pc) or AR220028 - F/R DIFF SET 43T STRAIGHT (1pc) in ARRMA 6S BLX models
This is the Arrma 1/8 BLX Aluminum Sliding Motor Mount Plate in Red anodize. This red Aluminum Motor Mount Plate is specially designed to provide a safe and secure mounting point for your ARRMA 1/8 scale BLX Motor.
Features:
Precision manufactured from lightweight aluminum for reduced vehicle weight and consistent hardware fit
Anodized red for cool ARRMA looks and increased durability
Precision manufactured screw mounting holes for fast and easy servicing
Aluminum material will assist in dissipating heat during extreme RC action
Includes:
1 Sliding Motor Mount Plate
Requires:
To be used in conjunction with ARA320468
COMPATIBILITY:
Arrma Felony 6S BLXArrma Infraction 6S BLXArrma Infraction V2 6S BLXArrma Kraton 6S BLXArrma LimitlessArrma Mojave 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLXArrma Typhon 6S BLX
This is a replacement set of two Arrma Kraton EXB Steel Diff Outdrives. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade.
NOTE: Must be used with ARA310983 - 29mm DIFF CASE or ARA311061.
Features:
Manufactured from tough steel for long lasting durability
Precision machined for accurate fit to ensure a smooth and leak-free diff action
Supplied as a pair
To be used with 29mm diff cases
Includes:
(2) Steel Diff Outdrive
COMPATIBILITY:
Arrma Fireteam 6S BLXArrma Kraton 6S BLXArrma Mojave 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLX
This is a replacement Arrma Kraton EXB Differential Gear Set. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade.
NOTE: Must be used with differential components designed to be used with a 29mm diff case.
Features:
Durable steel gears to withstand extreme RC action
Precision manufactured gear teeth for accurate gear mesh and consistent performance in all conditions
Strong steel cross shafts for long-lasting durability and efficient running at high speeds
To be used in 29mm diff cases
Can be used in limited slip and open diff builds
Includes:
(4) 10T Satellite Gears
(2) 20T Planetary Gears
(2) Metal Cross Shafts
COMPATIBILITY:
Arrma Kraton 6S BLXArrma Mojave 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLX
OVERVIEW:
This Body Mount set is manufactured from tough composite material for long-lasting performance on your ARRMA vehicle.
FEATURES:
Durable composite material for optimum performance when the action gets tough - Engineered to provide cushioning for your bodyshell - Precision manufactured to provide easy fit to your vehicle - Multiple body post mounting holes enable large range of body height adjustment
INCLUDES:
1 x Front Body Mount
1 x Rear Body Mount
OVERVIEW:
This high-quality Input Shaft Cup provides a direct replacement for your kit item.
FEATURES:
Super-strong steel for long-lasting durability - Precision manufactured Set Screw threads for safe and secure fitting
INCLUDES:
1 x Input Shaft Cup - Diameter x Length - 7x18mm
1 x Grub Set Screw
Arrma Kraton EXB Rear Lower Suspension Arms are a replacement for the Kraton 6S EXB model, but can be used with the 6S BLX Kraton, Outcast, Talion and Notorious models as an optional upgrade*. These Heavy-Duty Rear Lower Suspension Arms have been designed ARRMA tough so you can send it with confidence.
*NOTE: These are compatible with the full range of Arrma 6S BLX models, but may require additional parts. If used as an optional upgrade, these arms must be used with ARA713032 - 3x33mm Shock Mount Pin.
Features:
Heavy-Duty design with material strategically placed to increase crash resilience
Constructed from tough composite material for increased crash resistance and long-lasting durability
Precision molded hinge pin holes for smooth slop-free suspension action
Sway Bar mounting holes for a wide selection of handling options
148mm between inner and outer hinge pin centers
Sold in pairs
Includes:
(1) Rear Suspension Arm - Left
(1) Rear Suspension Arm - Right
COMPATIBILITY:
Arrma Fireteam 6S BLXArrma Kraton 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLX
OVERVIEW:
This super-strong 13T Straight Main Input Gear is a perfect part to carry in your RC tool box.
FEATURES:
Super-durable steel material for long-lasting performance in extreme RC conditions - Precision manufactured Gear teeth for smooth operation and consistent power transfer
INCLUDES:
1 x 13T Straight Main Input Gear per pack
OVERVIEW:
This super-strong Diff Gear Set provides replacement parts for your kit items.
FEATURES:
Super-tough and durable steel to withstand extreme RC action - Precision manufactured Gear Teeth for consistent performance in all conditions - Metal Cross Shafts for long-lasting durability and super-efficient running at high speeds
INCLUDES:
4 x 10T Satellite Gears
2 x Metal Cross Shafts
2 x 20T Planetary Gears
4 x Satellite Gear Shims
4 x Metal Cross Shaft Insert
RPM ARRMA Kraton/Durango DEX8T Rear A-Arms are compatible with the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T. These arms are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. These A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings. The next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on the RPM front A-arms (RPM81482 – sold separately). Another beneficial improvement comes from reduced weight. RPM Kraton, Talion & Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)! RPM rear A-arms have molded in mounting points for RPM optional mudguards (RPM81412 - sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires. RPM A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM A-arms are molded from RPM's nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst!
NOTE: RPM ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold in pairs. RPM A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use RPM81412 – sold separately).
This is a replacement set of Arrma Front Upper Suspension Arms. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade. These Heavy-Duty Front Upper Suspension Arms have been designed ARRMA tough so you can send it high with confidence.
Features:
Heavy-Duty design with material strategically placed to increase crash resilience
Constructed from tough composite material for increased crash resistance and long-lasting durability
Precision molded hing pin holes for smooth slop-free suspension action
120mm between inner hinge pin center and outer end
Includes 1mm and 2mm Castor adjustment clips for a range of tuning options
Provided in a pair
Includes:
(1) Front Upper Suspension Arm Left
(1) Front Upper Suspension Arm Right
(4) Castor Adjustment Clip 1mm
(2) Castor Adjustment Clip 2mm
COMPATIBILITY:
Arrma Big Rock 6S BLXArrma Fireteam 6S BLXArrma Kraton 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLX
This is an optional Arrma Skid Plate Mount Set, intended for use BLX Mojave kit.
Features:
Tough and durable composite material for long-lasting vehicle protection and increased impact resistance
Precision manufactured for consistent fit and easy servicing
Includes two skid plate upper braces that have been engineered to absorb impacts to the front and rear of the vehicle
Includes:
(1) Front Skid Plate Upper Brace
(1) Rear Skid Plate Upper Brace
(1) Front Skid Plate Lower Mount
(1) Rear Skid Plate Lower Mount
COMPATIBILITY:
Arrma Mojave 6S BLX
This is a set of two replacement Arrma Rear Lower Suspension Arms, intended for use with the Mojave BLX kits.These Rear Suspension Arms are the perfect replacement part for your kit items.
Features:
Tough and strong composite material for increased crash resistance and long-lasting durability
Specially designed droop screw fit for added tuning options
Sway bar mounting holes enable a wide selection of handling options
Includes:
(2) Rear Suspension Arms (1 left, 1 right)
OVERVIEW:
These high-quality Steel Diff Outdrives are the perfect spare parts to carry in your RC tool box.
FEATURES:
Super-tough steel for long-lasting durability during extreme RC action - Precision manufactured slots for consistent Drive Shaft operation
INCLUDES:
2 x Steel Diff Outdrives per pack
These composite side guards are the perfect replacement for your kit items.
Features:
Super-tough composite material for superior crash resistance and long-lasting durability
Specially designed tall sides to decrease dirt and water ingress
Precision manufactured chassis mounting holes for a safe and secure fitting
Designed to assist with mounting electronics and battery tray
Includes:
(2) composite Tall Side Guards per pack - 1 x left, 1 x right
COMPATIBILITY:
Arrma Notorious 6S BLXArrma Outcast 6S BLX
Arrma 6S BLX Steel Skid Plate. This skid plate is designed to prolong the life of the 6S BLX chassis. Made from 1.5mm thick steel this optional skid plate is ready to be mounted and bashed. Package includes one skid plate.
COMPATIBILITY:
Arrma Kraton 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLXArrma Typhon 6S BLX
This is a pack of two replacement Arrma Front Upper Suspension Arms. This package also includes six caster clips.
COMPATIBILITY:
Arrma Felony 6S BLXArrma Infraction 6S BLXArrma Infraction V2 6S BLXArrma LimitlessArrma Typhon 6S BLX
This is an Arrma Radio Box Set, intended for use with BLX and Roller EXB models of the Kraton, Mojave, Nototrious, Outcast, Talion and Typhon vehicles. This Radio Box Set is designed to keep your receiver protected from the elements wherever you bash your ARRMA vehicle.
Features:
Designed to protect radio receivers from dirt, dust and water damage
Large volume accommodates a wide range of radio receivers
Molded from strong and durable composite material for long-lasting durability
Precision manufactured rubber seal for maximum dirt and moisture resistance
High-quality radio box foam for increased sealing of wire routing slot
Integrated aerial wire mount for secure radio receiver aerial positioning
Includes:
(1) Main Receiver Box
(1) Receiver Box Lid
(1) Receiver Box Lid Seal
(1) Receiver Box Wire Seal
Specifications:
Maximum Internal Dimensions (L x W x H): 2.04in (52mm) x 1.42in (36mm) x 1.30in (33mm)
COMPATIBILITY:
Arrma Fireteam 6S BLXArrma Kraton 6S BLXArrma Mojave 6S BLXArrma Notorious 6S BLXArrma Outcast 6S BLXArrma Talion 6S BLXArrma Typhon 6S BLX
OVERVIEW:
These Front Lower Suspension Arms are the perfect replacement for your kit items.
FEATURES:
Tough composite material for increased crash resistance and long-lasting durability - Specially designed Droop Screw fitting for added tuning options - Sway Bar mounting holes for a wide selection of handling options
INCLUDES:
1 x Front Lower Arm (Left)
1 x Front Lower Arm (Right)
OVERVIEW:
These Front Lower Suspension Arms are the perfect replacement for your kit items.
FEATURES:
Super-tough composite material for increased crash resistance and long-lasting durability - Specially designed Droop Screw fitting for added tuning options - Sway Bar mounting holes for a wide selection of handling options
INCLUDES:
2 x Front Lower Suspension Arms per pack - 1 x Left, 1 x Right
This is an optional Arrma BLX Front Valance, intended for use BLX Mojave kit.
Features:
Tough and flexible material for long lasting dependable performance
Provides additional scale realistic looks to your vehicle
Includes:
(1) Front Valance
OVERVIEW:
This super-tough Composite Suspension Mount Set provides replacement parts for your kit items.
FEATURES:
Super-tough composite material for long-lasting durability during extreme RC action - Precision manufactured for smooth suspension operation in all conditions - Front-Front and Rear-Front Suspension Mounts are compatible with AR330378 and AR330186 - Aluminium Suspension Hanger Mount - for increased strength and crash resistance
INCLUDES:
1 x Front-Front Composite Suspension Hanger
1 x Front-Rear Suspension Hanger
1 x Rear-Front Suspension Hanger
1 x Rear-Rear Suspension Hanger
OVERVIEW:
These 17mm Aluminium Wheel Nuts provide a strong and reliable fixing for your vehicle's wheels.
FEATURES:
Manufactured from lightweight precision aluminium for reduced vehicle weight and consistent fitting - Precision manufactured threads for easy tightening and removal - Anodised black for cool looks and increased durability
INCLUDES:
4 x 17mm Black Aluminium Wheel Nuts per pack
OVERVIEW:
This super-tough Front Bumper parts set provides the perfect replacement part for your kit items.
FEATURES:
Super-strong composite material for increased crash resistance and protection against front impact damage - Long-lasting durability for extreme RC action - Precision manufactured screw mounting holes for fast and easy servicing - Body platform supports middle of body from the inside, protecting the body during crashes
INCLUDES:
1 x Front bumper
1 x Front bumper bar
1 x Body platform