Upgrade your drivetrain with Traxxas 32P Heavy Duty Pinion Gears, built tough from hardened steel for maximum durability and long-lasting performance. Available in a range of tooth counts from 12T to 22T, these 32-pitch pinions are perfect for high-power setups and intense off-road action. 🔩 Precision-machined hardened steel🔩 Perfect for brushless power systems🔩 Includes set screw for secure installation🔩 Available sizes: 12T through 22T🔩 Fits 3mm motor shafts Includes: (1) Steel Pinion Gear (Choose Tooth Count) (1) Set Screw Part Numbers: 3942X–3952X (select by tooth count) Built for strength. Made for speed. Trusted by Traxxas.

Read more less

UpGrade RC "Black Lightning" Rubber Sealed Bearing Kit for Traxxas® TRX-4M™📦 Part #: UPG-17014💥 Boost performance. Seal out the grime. Upgrade your TRX-4M with the UpGrade RC “Black Lightning” Bearing Kit—built to handle the roughest terrain and keep your rig rolling smoothly. Featuring rubber-sealed bearings, this kit offers enhanced protection from dirt, dust, and moisture, meaning less maintenance, more drive time, and longer-lasting performance. 🛠️ Key Features: ✅ Rubber Seals: Keep out water, grime, and contaminants ✅ Smooth & Quiet Operation: Reduced friction for better performance ✅ High Durability: Less wear = longer life ✅ Corrosion Resistant: Run hard in any environment ✅ Precision Fit: Designed specifically for TRX-4M platforms 🔧 Includes (22 Bearings Total): (2) 8x12x3.5mm (4) 5x8x2.5mm (4) 4x8x3mm (4) 3.5x7x2.5mm (8) 3x6x2.5mm 💡 Note: Always verify your model’s bearing sizes in your manual, especially if you’ve installed hop-ups or own a different production version. 🚀 Built for performance. Sealed for protection.The Black Lightning series delivers the smooth power transfer and reliability you need—on the rocks or off the grid.  

Read more less

Upgrade your Maxx with serious traction and durability using the 8979 Traxxas Sledgehammer® Tires pre-mounted on rugged 2.8" black wheels. These factory-assembled, glued tire and wheel combos feature belted Sledgehammer all-terrain tires, optimized for aggressive grip and minimal ballooning—perfect for high-speed bashing and off-road domination. 🛞 Features: Pre-mounted and glued for out-of-the-box convenience Black 2.8" wheels with 17mm splined hubs Belted Sledgehammer® All-Terrain tread for max grip Foam inserts included TSM® rated for stability under high-speed runs Fits Traxxas Maxx with 17mm splined hubs Includes: (2) Assembled tires and wheels (with foam inserts) Ready to bash harder and fly higher—just bolt on and go!

Read more less

Upgrade or replace your TRX-4’s battery mounting system with this Traxxas 8223 Battery Plate & Strap Set. Designed for secure battery placement, this set ensures your power source stays firmly in place during the toughest crawls and trail adventures. Compatible with the TRX-4 Ford Bronco kit and requires TRA8072 inner fenders for installation. 🔧 Includes: (1) Battery plate (1) Battery strap (4) 3x8mm flat head screws ✅ Features: Genuine Traxxas replacement part Provides secure battery mounting Built for rugged trail and crawler use Perfect fit for your TRX-4 Ford Bronco build!

Read more less

Unleash your model's full potential with the Traxxas Certified iD® LiPo Battery. Engineered to deliver maximum speed, runtime, and performance, this 2-cell 7.4V 1600mAh LiPo provides the power you need for high-energy RC action. Thanks to Traxxas’ exclusive iD® technology, charging is easier and safer than ever—just plug it in and let the charger do the work. Whether you’re racing or bashing, this battery keeps you in the game longer with consistent, reliable power. 🔋 Specs: Voltage: 7.4V (2S LiPo) Capacity: 1600mAh Connector: iD® High-current output for top-speed performance ✅ Features: Traxxas Certified quality and performance iD® technology ensures safe, hassle-free charging Provides excellent run time and punch for Traxxas models Designed for direct-fit, plug-and-play use Perfect for your TRX-4M, 1/18 LaTrax, and other compatible Traxxas vehicles.

Read more less

Replacement 23-turn brushed motor for LaTrax® vehicles. Restore your LaTrax® vehicle’s performance with the Traxxas 7575R 370-Size Brushed Motor. This 23-turn motor is designed as a direct replacement and includes pre-installed bullet connectors for quick and easy installation. 🔧 Features: 23-turn brushed design 370-size motor Pre-wired with bullet connectors Delivers smooth and reliable power Genuine Traxxas® replacement part 💥 Compatibility: LaTrax® Teton® LaTrax® Rally LaTrax® Desert Prerunner Perfect for keeping your LaTrax® vehicle running strong with factory-spec performance!

Read more less

Rear Shock Tower – Built for Clipless ConvenienceUpgrade or replace your rear shock tower with this genuine Traxxas 3638R Clipless Body Mounting Shock Tower. Engineered for strength and compatibility with the clipless body system, this part keeps your suspension responsive while handling hard landings and rough terrain with ease. ✅ Key Features: Designed for clipless body mounting systems Provides durable and stable rear shock support Direct fit replacement for select Traxxas 2WD models Made from high-strength composite material 📦 Includes: (1) Clipless Body Mounting Rear Shock Tower ✅ Compatibility: Traxxas Bigfoot® No. 1 Traxxas Ford® F-150® Raptor Traxxas Rustler® (2WD) Traxxas Slash® (2WD) Traxxas Stampede® (2WD) Genuine Traxxas quality means perfect fit, reliable performance, and easy installation every time.

Read more less

These 3x12mm countersunk machine screws from Traxxas are perfect for flush-mount applications where a clean, low-profile finish is needed. With Phillips drive heads for easy installation, they’re ideal for chassis and other flat-surface mounting tasks. Features:• 3x12mm steel machine screws• Countersunk heads for flush fit• Phillips drive for standard screwdriver compatibility• Great for chassis and hardware installations• Genuine Traxxas hardware for reliable performance Includes:• (6) 3x12mm Countersunk Machine Screws (Phillips Drive)Part Number: 3178 Tighten up your build with dependable, flush-fitting Traxxas screws.  

Read more less

Secure your components with confidence using Traxxas 3x20mm Countersunk Machine Screws. Featuring hex drive heads and a flush-fit countersunk design, these screws are perfect for applications where a smooth surface is essential. Features:• 3x20mm steel machine screws• Countersunk heads for flush mounting• Hex drive for reliable installation• Ideal for chassis, suspension, and flat-surface mounting• Genuine Traxxas hardware Includes:• (6) 3x20mm Countersunk Machine ScrewsPart Number: 2590 Perfect fit, strong hold—upgrade or replace with genuine Traxxas quality.      

Read more less

Authentic Lighting for the Trail-Ready F-150 Enhance your TRX-4M Ford® F-150 with the realism and performance of the Pro Scale® LED Light Kit from Traxxas. Specifically designed for the 1/18 High Trail™ Edition and Monster Truck platforms, this kit includes fully functional headlights, tail lights, brake lights, and hazard lights that respond directly to your throttle and brake inputs—just like a real truck. Installation is fast and simple with a single wire connection, and no programming is needed thanks to full integration with the ECM-2.5™. Plus, the waterproof design means your lighting stays reliable in any weather. Features:• Working headlights, tail lights, brake lights & hazard lights• Lights respond to throttle and brake inputs for realistic control• Plug-and-play installation—pre-programmed with ECM-2.5™• Waterproof design for all-weather performance• Specifically fits TRX-4M Ford® F-150 body Includes:• (1) TRX-4M Ford F-150 Pro Scale® LED Light KitPart Number: 9884 Light up your adventure with scale realism and trail-tough reliability—Pro Scale style.  

Read more less

Trail-Ready Lighting with True Scale Detail Bring your TRX-4M ’79 Chevrolet® K10 to life with the Pro Scale® LED Light Kit from Traxxas. Designed specifically for the 1/18 High Trail™ Edition and Monster Truck platforms, this all-in-one light kit delivers functioning headlights, tail lights, brake lights, and hazard lights—all perfectly synchronized with your driving inputs for maximum realism. Installation is quick and easy thanks to plug-and-play compatibility with the ECM-2.5™—no extra programming required. Just connect a single wire and hit the trail. Plus, with waterproof construction, you're ready for any weather. Features:• Authentic scale lighting: headlights, tail lights, brake lights & hazard lights• Lights respond dynamically to throttle and brake input• Pre-programmed to work with ECM-2.5™—no additional setup needed• Single wire connection for quick installation• Fully waterproof for reliable performance in all conditions• Designed specifically for TRX-4M 1979 Chevrolet® K10 bodies Includes:• (1) Pro Scale LED Light Kit for TRX-4M 1979 Chevrolet® K10Part Number: 9883 Realistic lighting. Simple install. Built for the trail.  

Read more less

Replacement Gears for Portal-Equipped Rigs Keep your TRX-4M or TRX-4MT running smooth with this genuine Rear Portal Drive Gear Set. Designed specifically for use with the optional portal axles (#9843R), this set includes all three replacement gears needed to restore performance and durability in the rear axle. Features:• Replacement gear set for rear portal axles• Compatible with TRX-4M and TRX-4MT models• Designed for use with optional portal axles (#9843R)• High-strength metal construction Includes:• (3) Rear Portal Drive GearsPart Number: 9878 Stay geared up and trail-ready with tough, reliable Traxxas components.  

Read more less

Traxxas 1.0" Foam Inserts (Soft or Firm) – 9875 / 9874Tune Your Tires for the Trail Dial in the perfect feel for your TRX-4M tires with Traxxas 1.0" Foam Inserts, available in Soft (9875) or Firm (9874) options. Whether you’re looking for maximum traction over rocks or added stability for high-speed trail runs, these inserts are a must-have upgrade from the stock foamless setup. Features:• Choose from: • Soft (Part #9875) – Enhanced grip and tire flex for crawling • Firm (Part #9874) – Increased sidewall support and stability• Designed for 1.0" TRX-4M tires• Improves handling, realism, and performance• Great for tuning your setup to match terrain and driving style Includes:• (2) 1.0" Foam Inserts (Soft or Firm – select option) Take control of your terrain—soft for flex, firm for stability. Trail-tune your TRX-4M like a pro.

Read more less

Officially Licensed. Seriously Aggressive. Get real-world off-road performance in micro scale with the officially licensed Mickey Thompson® Baja Pro XS tires from Traxxas. Designed for 1/18 and 1/24 micro crawlers, these 1.0" tires deliver maximum traction across mud, rock, and loose terrain—all while replicating the aggressive tread and sidewall styling of their full-size counterparts. Note: Due to the unique bead design and thickness, these tires are only compatible with TRX-4M style beadlock wheels. Features:• Official Mickey Thompson® licensing for true scale realism• 61mm outer diameter for serious ground clearance• Aggressive lug and sidewall tread for superior grip• Built for loose, muddy, rocky, and uneven terrain• Durable rubber compound balances grip and longevity• Ideal for 1/24 and 1/18 micro rock crawlers Specifications:• Outer Diameter: 2.4" (61mm)• Bead Diameter: 1.0"• Application: Micro Crawlers (TRX-4M & similar) Includes:• (2) Mickey Thompson® Baja Pro XS Micro Crawler TiresPart Number: 9871 Big tire attitude in a micro crawler size—tackle any trail with style and grip.

Read more less

Boost Ground Clearance & Crawling Performance Take your TRX-4M to the next level with the Assembled Portal Axle Set from Traxxas. This premium front and rear axle upgrade delivers 10.5mm of added ground clearance and 9mm wider track width, giving your 1/18 micro crawler the capability to conquer more aggressive terrain with ease. Built for durability, the set includes all-metal portal gears and self-lubricating bushings—and comes completely assembled for a true plug-and-play experience. Includes two sets of transmission gears: red for the stock transmission and blue for use with the optional Two-Speed Transmission (TRA9891). ⚠️ Not compatible with TRA9776R low-range gears. Features:• +10.5mm increased ground clearance• +9mm wider track width for added stability• All-metal portal gears and self-lubricating bushings• Fully assembled—ready to install• Includes standard (red) and two-speed (blue) transmission gear sets• Compatible with TRX-4M single-speed and optional two-speed transmissions Includes:• (1) Front Assembled Portal Axle• (1) Rear Assembled Portal Axle• (2) Standard Transmission Gears (Red)• (3) Optional Two-Speed Transmission Gears (Blue)• (4) Hex NutsPart Number: 9843R Dominate more trails with more clearance—portal power for your TRX-4M. Make your K10 stand out—classic Chevy looks with trail-proven durability.

Read more less

Scale Style Meets Trail Toughness Add vintage attitude and rugged protection to your TRX-4M® 1979 Chevrolet® K10 High Trail Edition™ with this chrome Push Bar Bumper. Designed exclusively for the High Trail K10 platform, this optional accessory brings enhanced scale realism and trail-ready style to your classic Chevy rig. Note: Only compatible with the TRX-4M® '79 Chevrolet® K10 High Trail Edition™. Features:• Chrome push bar bumper for authentic vintage style• Enhances scale detail and front-end protection• Direct fit for TRX-4M High Trail K10 body and bumper setup• Genuine Traxxas part for precise fit and finish Includes:• (1) Chrome Push Bar BumperPart Number: 9838 Make your K10 stand out—classic Chevy looks with trail-proven durability.

Read more less

Add Scale Realism to Your 1/18 TRX-4M or TRX-4MT Ford F-150 Bring your TRX-4M Ford® F-150® body (TRA9812) to life with this detailed Chrome Body Accessory Set. Designed for a perfect fit and effortless installation, this set includes chrome-finished side mirrors, door handles, and windshield wipers that take your scale build to the next level. Ideal for replacing missing pieces or customizing your F-150 body for a sleek, factory-fresh appearance. Features:• Compatible with TRX-4M™ and TRX-4MT™ Ford F-150® body (TRA9812)• Chrome finish for enhanced realism and style• Precision fit for easy installation• Includes detailed accessories for a true-to-scale look Includes:• (1) Left Side Mirror• (1) Right Side Mirror• (1) Left Door Handle• (1) Right Door Handle• (2) Windshield WipersPart Number: 9816 Turn heads on the trail—enhance your TRX-4M Ford F-150 with chrome scale details that shine.

Read more less

For Use with Portal Drive Axles Only Unlock next-level crawling performance with the Traxxas 6.8:1 Transmission Gear Set, designed specifically for TRX-4M models equipped with portal drive axles. With a super low 6.8:1 reduction ratio, this red-anodized gear set delivers incredible torque and low-speed control for precision crawling over extreme terrain. Note: For use only with TRX-4M models running portal axles. Features:• Extra-low 6.8:1 reduction ratio for max torque• Designed specifically for use with portal drive axles• Anodized red finish for easy identification• Includes complete transmission gear set• Ideal for serious crawling and technical terrain Includes:• (1) Complete Red Transmission Gear SetPart Number: 9776A Take on the toughest lines with confidence—crawl harder with purpose-built gearing.

Read more less

Dial in the perfect balance of speed and torque with the Traxxas TRX-4M High Range Transmission Gear Set. Featuring a 16.6:1 reduction ratio, this gear set delivers excellent trail performance—ideal for tackling steep climbs while still allowing your rig to move at a respectable pace over open terrain. This all-in-one kit includes a full set of transmission gears and an 11-tooth pinion gear. It’s the perfect upgrade for drivers who want more versatile performance from their 1/18 TRX-4M. Features:• Ideal “Trail” gear set for balanced torque and speed• 16.6:1 reduction ratio• Includes all transmission gears and 11T pinion• Customize your TRX-4M’s driving style• Compatible with all TRX-4M models Optional Gear Sets Available Separately:• TRA9776R – 40.3:1 (Lowest speed / maximum torque)• TRA9776 – 16.6:1 (Balanced trail performance)• TRA9776X – 9.7:1 (Highest speed / least torque) Includes:• Complete Transmission Gear Set• (1) 11T Pinion GearPart Number: 9776 Find your perfect crawl-to-cruise ratio—trail tested and Traxxas tough.  

Read more less

Strengthen your rear end with the Traxxas HD Extreme Rear Stub Axle Carriers. Built for durability, these heavy-duty carriers are a direct fit for popular Traxxas 2WD platforms including the Rustler®, Bandit®, Slash®, Bigfoot® No. 1, Drag Slash®, and Stampede®. Whether you're bashing off-road or tearing up the track, these carriers deliver long-lasting performance and rugged support for your rear axle assembly. Perfect as replacements for worn parts or upgrades from stock components, they’re also a direct match for the Traxxas 2WD Extreme Heavy Duty Upgrade Kits (TRA9180–9182-series). Features:• Heavy-duty rear stub axle carriers for extra durability• Fits Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, Drag Slash®, and Slash Modified• Compatible with aluminum and standard Traxxas components• Works as a direct replacement for TRA9180, TRA9181, and TRA9182 kits• Available in multiple colors for custom styling Includes:• (1) Left Rear Stub Axle Carrier• (1) Right Rear Stub Axle Carrier• (2) 3x31mm Hinge Pins• (2) 3x18mm ScrewsPart Number: 9150 Hit harder, drive longer—these HD carriers are built to handle serious action.

Read more less

Toughen up your front end with the Traxxas HD Extreme Steering Blocks. Designed for maximum durability in demanding off-road conditions, these heavy-duty steering blocks are a perfect upgrade or replacement for a wide range of Traxxas 2WD platforms, including Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, and Drag Slash®. Compatible with both standard setups and the 2WD Extreme Heavy Duty Upgrade Kits (TRA9180, TRA9181, and TRA9182-series), these blocks are built to take a beating while maintaining precise steering performance. Features:• Heavy-duty design for increased strength and durability• Fits Traxxas 2WD models: Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, Drag Slash®• Works with stock and aluminum Traxxas components• Compatible with Extreme Heavy Duty Upgrade Kits (TRA9180–9182)• Available in multiple colors for custom builds Includes:• (1) Left HD Extreme Steering Block• (1) Right HD Extreme Steering Block• (2) 3x26mm Hinge Pins• (2) 3x15mm Screws• (2) Hex NutsPart Number: 9137 Strength where it matters—these HD steering blocks are built for serious off-road performance.

Read more less

Upgrade your 2WD Traxxas rig with the strength to handle serious abuse. The Traxxas HD Extreme Caster Blocks are built tough for extreme off-road action, making them the perfect replacement or upgrade for Rustler®, Bigfoot®, Slash®, and Stampede® 2WD models. Whether you're bashing hard or building with the 2WD Extreme Heavy Duty Upgrade Kits (TRA9180/9181-series), these blocks deliver a secure, high-performance fit. Features:• Heavy-duty design for maximum durability• Compatible with Traxxas 2WD platforms: Rustler®, Bigfoot®, Slash®, Stampede®• Works with standard and aluminum Traxxas components• Designed for use with Extreme HD Upgrade Kits (TRA9180 & TRA9181-series)• Easy, secure installation with included hardware• Available in multiple colors for custom builds Includes:• (1) Left HD Extreme Caster Block• (1) Right HD Extreme Caster Block• (2) 3x26mm Hinge Pins• (2) 3x15mm ScrewsPart Number: 9136 When the trail gets tough, these caster blocks hold strong—Traxxas-tough, track-tested.

Read more less

Tackle wrenching tasks with speed and precision using the Traxxas Speed Bit Hex Driver Set. This 4-piece set includes the most common metric sizes—1.5mm, 2.0mm, 2.5mm, and 3.0mm—perfect for maintaining and upgrading your RC vehicles. Designed for use with standard 1/4" drive tools or power drivers for faster work in the pit. Features:• Includes 4 hardened steel hex bits: 1.5mm, 2.0mm, 2.5mm, and 3.0mm• Fits standard 1/4" hex drive tools• Precision-cut tips for a perfect fit• Ideal for use with Traxxas Speed Bit handles or electric drivers Includes:• (4) Hex Driver Bits: 1.5mm, 2.0mm, 2.5mm, 3.0mmPart Number: 8715X Fast, accurate, and built to last—upgrade your RC toolbox with Traxxas Speed Bits.

Read more less

Get the perfect fit with the Traxxas Extended Portal Drive Stub Axles. Originally designed as replacements for the TRX-4 ’79 Blazer and Bronco models, these extended axles can also be used as optional upgrades on the TRX-4 Sport, Tactical, or Defender to accommodate Blazer/Bronco wheels. Features:• Extended stub axles for wider wheel offset• Direct replacements for TRX-4 Blazer and Bronco• Optional upgrade for Sport, Tactical, and Defender models• Perfect for fitting stock Blazer/Bronco wheels on other TRX-4 variants Includes:• (2) Extended Portal Drive Stub AxlesPart Number: 8255A Whether you're replacing or customizing, these extended axles deliver the clearance and compatibility your rig needs.

Read more less

Keep your TRX-4’s drivetrain in top shape with this pack of two genuine Traxxas Portal Drive Stub Axles. Designed as direct replacements, these stub axles are built to handle the rugged demands of trail and crawl adventures. Features:• Replacement portal drive stub axles for Traxxas TRX-4• Durable construction for extreme off-road use• Direct fit—no modifications needed Includes:• (2) Portal Drive Stub AxlesPart Number: 8255 Maintain maximum performance and reliability on every trail run with genuine Traxxas parts.

Read more less

Upgrade your TRX-4's steering precision and durability with the optional Traxxas Metal Steering Servo Horn. Made from tough sintered metal, this horn is built to handle the demands of hardcore crawling and trail action. Compatible with standard servos using a 25-tooth spline, it’s a strong, reliable replacement for plastic servo horns. Features:• Heavy-duty sintered metal construction• Fits standard 25-tooth spline servos• Direct fit for Traxxas TRX-4 models• Ideal for high-torque steering setups Includes:• (1) Metal Servo Horn• (1) 3x14mm Button Head ScrewPart Number: 8247X Strong, precise, and ready for serious steering performance—ditch the plastic and upgrade with confidence.

Read more less

Keep your TRX-4’s bumpers locked in and trail-ready with this genuine Traxxas Bumper Mount Set. Designed as a direct replacement, this set includes both front and rear bumper mounts along with the necessary mounting hardware for easy installation. Features:• Replacement bumper mounts for Traxxas TRX-4• Includes both front and rear mounts• Comes with mounting hardware for hassle-free installation• Durable construction for rugged off-road performance Includes:• (1) Bumper Mount Set• (1) Set of Mounting HardwarePart Number: 8237 Built tough to keep your bumpers where they belong—on the trail and in the action.

Read more less

Bring your scale rig to life with the Traxxas TRX-4 Defender Complete LED Light Set. Designed specifically for the TRX-4 with the factory Land Rover Defender body (TRA8011), this fully waterproof lighting kit includes everything you need to light up the night—headlights, tail lights, rock lights, and roof light bar—all powered by the included power supply module. Features:• Complete LED light kit for TRX-4 Defender body (TRA8011)• Includes headlights, tail lights, rock lights, and roof light bar• Fully waterproof for extreme off-road adventures• Includes power supply for plug-and-play convenience• Genuine Traxxas accessory for perfect fit and function Includes:• (1) Complete LED Light Set• (1) Power Supply ModulePart Number: 8095 Light up every trail and every detail—built tough, just like your TRX-4.

Read more less

Fine-tune your suspension setup with Traxxas 0.30 Rate White GTS Shock Springs. Designed for TRX-4 models equipped with GTS shocks, these medium-rate springs offer a great balance of support and flexibility—ideal for trail and crawling applications where a little extra firmness makes all the difference. Features:• 0.30 spring rate – medium (White)• Optimized for GTS shocks on TRX-4 platforms• Great for added stability and handling• Color-coded for easy tuning reference• Durable steel construction Includes:• (2) White 0.30 Rate GTS Shock SpringsPart Number: 8043 The perfect balance between flex and firmness—dial in your TRX-4’s ride for any terrain.

Read more less

Dial in your suspension with Traxxas 0.22 Rate Yellow GTS Shock Springs. These soft-rate springs are perfect for lighter rigs or tuning for more articulation and crawling performance. Designed for GTS shocks found on TRX-4 models, they offer a precise fit and consistent rebound. Features:• 0.22 spring rate – soft (Yellow)• Ideal for fine-tuning suspension feel• Fits Traxxas TRX-4 GTS shocks• Durable steel construction• Color-coded for easy identification Includes:• (2) Yellow 0.22 Rate GTS Shock SpringsPart Number: 8042 Customize your ride’s performance—because every trail demands a different setup.  

Read more less

Keep your Slash 4X4 running smooth and strong with this Traxxas 52T Spur Gear. Featuring a 0.8 Mod pitch (equivalent to 32 pitch), this durable gear is a direct replacement for your stock setup and delivers reliable power transfer for high-performance driving. Features:• 52-tooth spur gear• 0.8 Mod / 32 pitch• Durable molded construction• Fits Slash 4X4 and compatible models Includes:• (1) 52T Spur GearPart Number: 6843 Perfect for maintaining smooth acceleration and efficient gearing on your Slash 4X4.  

Read more less

Built for durability and precision, the Traxxas 23T Steel Mod 1.0 Pinion Gear is a tough upgrade for high-power setups. Featuring a 5mm bore and Mod 1.0 tooth pitch, it’s perfect for brushless conversions or high-performance builds requiring extra strength. Includes the pinion gear and set screw—ready to bolt on and rip. Features:• 23-tooth Mod 1.0 pitch• 5mm bore fits standard 1/8-scale motor shafts• Hardened steel construction• Includes set screw for secure installation Includes:• (1) 23T Steel Pinion Gear• (1) Set ScrewPart Number: 6481X

Read more less

Unleash the full potential of your TRX-4M with the Traxxas 6250 Brushless FOC Power System Combo! This powerful upgrade delivers up to 50% more speed and performance than the stock brushed system, all while maintaining low-speed control and crawling precision with Field-Oriented Control (FOC) technology. The 3350kV brushless outrunner motor and waterproof ECM install easily with no mods—just plug and play. Fully compatible with Traxxas TQ and TQi transmitters and 2S TRX-4M iD® LiPo batteries. Pro Scale® lighting and three selectable drive modes (Sport, Trail, Crawl) are all retained. Features:• Powerful 3350kV brushless outrunner motor• Field-Oriented Control (FOC) for incredible torque and control• Plug-and-play installation using original ECM mounts• Retains Pro Scale® lighting and 3 drive modes• Waterproof ECM with integrated 3-channel receiver• Compatible with 2S TRX-4M iD® LiPo batteries• Includes 11-tooth brass pinion gear• Works with TQ and TQi transmitters Includes:• (1) TRX-4M Brushless FOC Power System ComboPart Number: 6250 Take your TRX-4M from fun to fierce—with the brushless upgrade that redefines control and performance.

Read more less

Upgrade your ride with these killer-looking Traxxas Talon Tires, pre-mounted on Black Chrome Gemini Wheels. Built for Maxx, Revo, and Summit trucks running the optional 17mm splined hubs (TRA5353X/G/R), these beasts combine aggressive styling with high performance. Featuring a wide, low-profile tread for sharp handling and reduced weight, the 3.8" wheels deliver a tighter, more responsive feel—without changing the overall tire diameter. Pre-glued with foam inserts, they’re track- and trail-ready right out of the package. Features:• Pre-mounted Talon tires on 3.8" Gemini wheels• Black chrome finish for a bold look• Fits 17mm splined hubs (TRA5353X, G, or R)• Pre-glued w/ foam inserts• Compatible with Maxx, Revo, and Summit Includes:• (2) Assembled Wheels & TiresPart Number: 5374X

Read more less

Keep your ride running smooth with this pair of Traxxas 15x24x5mm Ball Bearings. Designed with durable black rubber seals, these bearings lock in the lube and keep out the grime—perfect for high-performance RC action. Whether you're rebuilding or upgrading, these are a must-have for your pit box. Includes:• (2) 15x24x5mm Ball BearingsPart Number: 5106A

Read more less

Keep your engine secure with this pack of four 3x10mm flat head hex screws from Traxxas. Designed specifically for engine mount applications, these screws offer a flush fit and solid hold. A must-have for maintenance or replacement in your Traxxas nitro models. ✅ Flat head for flush engine mount fit✅ 3x10mm hardened steel construction✅ Hex drive for easy installation✅ Genuine Traxxas part Includes: (4) 3x10mm Flat Head Engine Mount Hex Screws Part #: 4859 Perfect fit. Proven durability. Traxxas quality.    

Read more less