The Hobbywing Xerun V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups.Features:
Optimized for more power and torque
Lower internal resistance allows for increased efficiency and cooler running temperatures
Fully exposed stator core for increased cooling effect
High-precision endbell plate to improve consistency
Specifications:Scale: 1/10thTurn: 17.5TkV Rating: 3020kVCell Count: 2-3SNo-Load Current: 3.7AOuter Diameter: 35.8mmLength: 51.4mmShaft Diameter: 3.175Weight: 149gFront Bearing: 9x4x4mmRear Bearing: 8x3x4mmAdjustable Timing: 30-60°Applications: 1/10th Stock Class Racing
The Hobbywing Xerun XR8 Plus G2S 1/8 Competition Sensored Brushless ESC is the next level in 1/8 competition ESC's. Advancements have been made allowing this ESC to support 48° of boost and turbo timing. When combining this ESC with an optional 4268/4274 G3 motor, the maximum speed can be promoted by 50%. For added protection, this ESC is equipped with advanced thermal protection and reverse polarity protection. These advancements allow for an ESC that is designed to outperform.NOTE: Use appropriate settings provided by the factory or team drivers. Check operating temperature in order to maximize your electronics. The wrong settings may damage the ESC or motor.Features:
Efficient heat dissipation system with lower temperature rise
Durable frameless fan
Internal Reverse Polarity Protection Circuit
RPM speed limit function
Easy Obtain Running Status with Real-time Data Recording Function
Multiple Programmable Items
Capacitor Thermal Protection
Super Internal BEC
Excellent dustproof performance
Ultra-soft 11AWG silicone wire
Customized solder tabs, easy to solder
Specifications:
ESC:
Scale: 1/8th
Waterproof: No
Continuous/Peak ESC Current: 200A/1080A
Input Voltage: 2-6S Lipo
BEC Output: 6-8.4V Adjustable,
Continuous/Peak BEC Current: 6A/15A(Switch-mode)
ESC Programing: SET Button on ESC/LCD Program Box/OTA Programmer
Firmware Upgrade: Supported
Size: 56.1mmx42.1mmx38.5mm
Weight: 122g(w/wires)
Applications: SL BL Motors/SD BL Motors
Vehicles: 1/8th On-Road/Off-Road/Truggy Racing
KV Rating/T Count: 4S LiPo? 4268/4274?3000KV - 6S LiPo?4274?2400KV
Fan:
Size: 30x30x10mm
Voltage Range: 5-8.4V
The XR10 Stock Sensored Brushless ESC/V10 G4 Motor Combo offers the high precision throttle control of the XR10 Stock Spec ESC and pairs it with a powerful V10 G4 motor at an incredible value!XR10 Stock Spec:
The Hobbywing Xerun XR10 Stock Spec offers the latest in Hobbywing ESC technology, developed and optimized for stock spec class racing. Recommended for on-road and off-road spec racing, this high quality ESC features a tiny 31.5x25.6x16.1mm footprint, a full aluminum case, and 80 amp current delivery with burst up to 380 amps! Other features include 2S LiPo compatibility, and a 6V/3A switch mode BEC.
V10 G4 Motor:
The V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups.Features:
ESC:
Special Design for STOCK Class Racing: Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to the STOCK class of 1/10 scale touring car, buggy racing.
Programming/Upgrading/Data Reading Wirelessly: Hobbywing's "WiFi Express" module is used with a iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), and allows the user to remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Small Size & Light Weight: The ESC is smaller and lighter than the standard version XR10 Pro. Mini version of XR10 Pro 160A. Small size (31.5x25.6x16.1mm) makes the installation convenient and the light weight (only 28g w/o wires) provides more weight margin when adjusting the balance of the chassis.
Super Internal BEC: Built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V. Allows the user to use various high voltage servos.
Adjustable Throttle & Brake PWM Frequencies: Independent and adjustable throttle & brake PWM frequencies. Guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Motor:
Specially designed for high-level racing.
Lightweight: The G4 Modified & Stock motors only weigh 161g & 132g respectively.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G4 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
The use of high-performance stator core, heat (200°C) resistant wire, heat (200°C) resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
Specifications:
ESC:
Current: Continuous: 80A / Burst: 380A
Battery: 5-7 cells NiMH/NiCd / 2S LiPo
Built-in BEC: 6V@3A (switch mode)
Motor Supported: Sensored and sensorless brushless motors
Suitable Motor: 3650 Motors,1/10 Touring Cars ?10.5T, 1/10 Buggy?13.5T
Application: STOCK class of 1/10th Touring Car & Buggy Racing
Cooling Fan: 5V - 7.4V (20x20x8mm)
Wires: 14AWG-200mm
Size: 31.5x25.6x16.1mm
Weight: 28g (without wires and cooling fan)
Motor:
Scale: 1/10th
Turn: 17.5T
kV Rating: 3020kV
Cell Count: 2-3S
No-Load Current: 3.7A
Outer Diameter: 35.8mm
Length: 51.4mm
Shaft Diameter: 3.175
Weight: 149g
Front Bearing: 9x4x4mm
Rear Bearing: 8x3x4mm
Adjustable Timing: 30-60°
Applications: 1/10th Stock Class Racing
The Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motors feature an updated can design over the G2 - and especially G1 - and push the boundaries of an Fixed Timing Motor with lower weight, good heat dissipation and a rebuildable design.
Features:
The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
The motor design is in compliance with IFMAR, and ROAR specifications.
Specifications:Scale: 1/10, 1/12Brushless: YesSensored: YesPole Count: 2KV Rating: 2450LiPo Cells: 2-3SNo-Load Current(A): 3.5Outer Diameter: 35.9mm (1.413")Length: 52.5mm (2.067")Shaft Diameter: 3.17mm (0.125")Weight: 176g (6.21oz)Timing: FixedApplications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10th , 1/12th On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only).
The Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motors feature an updated can design over the G2 - and especially G1 - and push the boundaries of an Fixed Timing Motor with lower weight, good heat dissipation and a rebuildable design.
Features:
The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
The motor design is in compliance with IFMAR, and ROAR specifications.
Specifications:Scale: 1/10, 1/12Brushless: YesSensored: YesPole Count: 2KV Rating: 3200LiPo Cells: 2-3SNo-Load Current(A): 4Outer Diameter: 35.9mm (1.413")Length: 52.5mm (2.067")Shaft Diameter: 3.17mm (0.125")Weight: 175g (6.17oz)Timing: FixedApplications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10th , 1/12th On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only).
The XR10 Stock Sensored Brushless ESC/V10 G4 Motor Combo offers the high precision throttle control of the XR10 Stock Spec ESC and pairs it with a powerful V10 G4 motor at an incredible value!XR10 Stock Spec:
The Hobbywing Xerun XR10 Stock Spec offers the latest in Hobbywing ESC technology, developed and optimized for stock spec class racing. Recommended for on-road and off-road spec racing, this high quality ESC features a tiny 31.5x25.6x16.1mm footprint, a full aluminum case, and 80 amp current delivery with burst up to 380 amps! Other features include 2S LiPo compatibility, and a 6V/3A switch mode BEC.
V10 G4 Motor:
The V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups.Features:
ESC:
Special Design for STOCK Class Racing: Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to the STOCK class of 1/10 scale touring car, buggy racing.
Programming/Upgrading/Data Reading Wirelessly: Hobbywing's "WiFi Express" module is used with a iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), and allows the user to remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Small Size & Light Weight: The ESC is smaller and lighter than the standard version XR10 Pro. Mini version of XR10 Pro 160A. Small size (31.5x25.6x16.1mm) makes the installation convenient and the light weight (only 28g w/o wires) provides more weight margin when adjusting the balance of the chassis.
Super Internal BEC: Built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V. Allows the user to use various high voltage servos.
Adjustable Throttle & Brake PWM Frequencies: Independent and adjustable throttle & brake PWM frequencies. Guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Motor:
Specially designed for high-level racing.
Lightweight: The G4 Modified & Stock motors only weigh 161g & 132g respectively.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G4 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
The use of high-performance stator core, heat (200°C) resistant wire, heat (200°C) resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
Specifications:
ESC:
Current: Continuous: 80A / Burst: 380A
Battery: 5-7 cells NiMH/NiCd / 2S LiPo
Built-in BEC: 6V@3A (switch mode)
Motor Supported: Sensored and sensorless brushless motors
Suitable Motor: 3650 Motors,1/10 Touring Cars ?10.5T, 1/10 Buggy?13.5T
Application: STOCK class of 1/10th Touring Car & Buggy Racing
Cooling Fan: 5V - 7.4V (20x20x8mm)
Wires: 14AWG-200mm
Size: 31.5x25.6x16.1mm
Weight: 28g (without wires and cooling fan)
Motor:
Scale: 1/10th
Turn: 13.5T
kV Rating: 3950kV
Cell Count: 2-3S
No-Load Current: 4.5A
Outer Diameter: 35.8mm
Length: 51.4mm
Shaft Diameter: 3.175
Weight: 149g
Front Bearing: 9x4x4mm
Rear Bearing: 8x3x4mm
Adjustable Timing: 30-60°
Applications: 1/10th Stock Class Racing
Hobbywing Quicrun WP-10BL60 Waterproof Sensorless Brushless ESC.
Features:
External programming port, easy to connect to the LED Program Card (purchase separately) when setting the ESC
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks.
Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection.
One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.
NOTE: Please make sure to uninstall the cooling fan before using this ESC in water. Clean and dry it soon after use to avoiding damage to the connectors.
Specifications:
Cont./Peak Current/ Resistance: 60A/360A/0.001?
Motor Type Supported: Sensorless Brushless Motor
Car Applicable: 1:10 On-road/Off-road/Buggy/Monster
Motor Limit: 2S Lipo or 6 cells NiMH:
On-road: 3656-size or smaller motor with the KV<6000
Off-road/Buggy/Monster: 3656-size or smaller motor with the KV<4000
Motor Limit: 3S Lipo or 9 cells NiMH:
On-road: 3656-size or smaller motor with the KV<4000
Off-road/Buggy/Monster: 3656-size or smaller motor with the KV<3000
Battery: 4-9 Cells NiMH, 2-3S Lipo
BEC Output: 6V/2A (Linear Mode)
Size/ Weight: 48.5(L)*38(W)*32(H) / 90g
Wires:
Power Leads: Red-14AWG-150mm*1/Black-14AWG-150mm*1
Motor Wires: Black-14AWG-100mm*3
Motor Connectors: 4mm Gold Bullet Connector (Female)
External Program Port: Available
Working voltage of Fan: From battery directly without regulating