Axial SCX24 2021 Ford Bronco - Hard Body 1/24 Scale Mini Scale Crawler!
The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires.
The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!
Axial SCX24 Ford Bronco
Features:
Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included
Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
Bonus second decal sheet for optional customization
Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
Working lights in front, with molded lenses on all four corners of the body
True full-time 4-wheel drive
Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance
Worm drive gears in front and rear differentials increase ground clearance
Sturdy steel C-channel frame rails with bracing for added strength and proper alignment
Durable steel axles provide strength and durability to match tough climbs and rough trails
2-Year limited warranty (see product manual for details)
Specifications:
Height: 4.625" (117 mm)
Front Track: 3.938 in (100.0mm)
Width: 3.875" (98 mm)
Rear Track: 3.938 in (100.0mm)
Wheelbase: 5.19" (132 mm)
Length: 8.75" (222 mm)
Includes:
(1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby® 2.4GHz 3-Channel Radio System
(1) Axial® AS-1 Micro Servo
(1) Horizon Hobby® ESC/Receiver Combo
(1) Dynamite® USB LiPo Charger
(1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion
(1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Everything you need to drive is included
The Axial AX24 XC-1 1/24 4WD Ready to Run Mini 4WS Crawler is designed to push the limits of 1/24 RTR crawlers. The AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and a worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. With 4-Wheel Steer, there are three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl".The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists. Everyone will find it to be a highly capable mini crawler to run on indoor or outdoor courses. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. This AX24 includes everything you need to get out and start having fun!
Axial® AX24™ XC-1™ 4WS 4WD RTR
Features:
Three 4-wheel steering (4WS) modes give all drivers terrain conquering ability.
Side plate chassis allows greater articulation for improved handling over rough terrain.
LED rock lights mounted in the rock sliders keep your path visible in low light.
1.0" Rockster wheels and Rock Lizards tires produce trail-taming traction.
Fully equipped — you can hit the trails almost immediately!
Specifications:Scale: 1/24Length: 7.8" (198 mm)Width: 4.5" (114 mm)Height: 3.7" (94 mm)Ground Clearance: 1.3 in (34mm)Wheelbase: 5.3" (135 mm)Drivetrain: 4WDPower Type: ElectricConnector Type: PH 2.0 (High-Current Ultra Micro)Motor Type: BrushedPinion: 11TSpur Gear: 55TCompletion Level: Ready-To-RunIncludes:
(1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler
(1) Spektrum SLT3 2.4GHz 3-Channel Radio System
(4) AA Transmitter Batteries
(1) Dynamite 350mAh 2S 7.4V LiPo
(1) 0.5 Amp USB Charger
(1) Product Manual
Needed to Complete:
Nothing! Everything you need to get out and have fun is in the box!
No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial SCX24 Jeep Wrangler JLU CRC performs like a winner. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
Features:
3-Link front and 4-link rear suspension for optimal handling
Two LED lights are included in the front bumper for night driving
Realistic steel frame rails add strength
True, full-time 4-wheel-drive
Comes with ESC, motor, and servo already installed
Specifications:Scale: 1/24Length: 7.8" (198mm)Width: 3.9" (99mm)Height: 4.2" (107mm)Wheelbase: 5.2" (132mm)Ground Clearance: 1.06" (27mm)Front Track Width: 3.9" (99.5mm)Rear Track Width: 3.9" (99.5mm)Tire Tread: Nitto Trail GrapplerWheel Width: 0.48" (12.4mm)Pinion: 10TSpur: 55TDifferential: 16T/4T (Worm Gear)Includes:
(1) 1/24 Axial SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR with
(1) ESC/Receiver (installed)
(1) 88T Motor (installed)
(1) AS-1 Micro Servo (installed)
(1) 4-Channel 2.4Ghz Surface Transmitter
(1) Dynamite 7.4v 350mAh 2S LiPo Battery
(1) USB Charger
(4) AA Batteries
Needed to Complete:
Nothing! Everything you need to get crawling is in the box.
The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail.
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Needed to Complete
Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
Specifications
Color Variant: Green
The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail.
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Needed to Complete
Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
Specifications
Color Variant: RED
The Hot Racing Axial SCX24 Aluminum Front Axle Case is a machined aluminum front axle housing upgrade for the Axial SCX 24 RTR vehicles. Package includes axle case, worm gear cover and hardware.
Features:
CNC machined billet aluminum axle housing and tubes, anodized black
CNC machined billet aluminum Worm Gear cover, anodized black
Replaces factory plastic axle case housing and diff cover
Direct fit hop up requires no vehicle modification for use
Compatible with Axial SCX24
Replacement for AXI31609
Specifications:
Weight: 12g
Length end-to-end: 65.7mm
Includes:
(1) aluminum axle housing
(1) aluminum Worm Gear cover
COMPATIBILITY:
Axial SCX24
This is a Hot Racing 32mm internal spring damper shock set for Axial SCX24 and other custom Rock Crawler projects.
Features:
CNC machined aluminum shock bodies, black anodized
Precision machined mm stainless steel shock shaft for durability
Delrin lower shaft seal
Air damping
Internal springs with one rates included: Black (Stiff)
All aluminum is anodized for durability, corrosion resistance, and great looks
Includes:
Four (4) assembled shocks
Two (2) black (Stiff) springs
Two (2) silver (soft) springs
Eight (8) Cap head screws
Requires:
Installation on vehicle
Recommended to use SPL10G08 increase smoothness
COMPATIBILITY:
Axial SCX24
The Axial SCX24 Front Axle is a replacement front axle intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one assembled front axle.
Hot Racing Axial SCX24 Brass Front Steering Knuckle.
Features:
CNC machined solid brass
Heavy to add weight to vehicle for greater stability and lower CG
Cutouts on knuckle for access to outer bearing race for easy bearing removal
Direct replacement for factory plastic steering knuckles
Includes:
(2) Brass steering knuckles
The Hot Racing Axial SCX24 Reservoir Friction Damper Shocks were developed for the Axial SCX24, but may be compatible with other similar mini/micro crawlers as well. These shocks are friction damped, requiring only a partial filling of silicone oil. These shocks feature a machined faux reservoir shock cap for realistic scale looks, and include a full set of soft and hard springs to allow tuning. Package includes shocks, springs and hardware.
NOTE:
Requires 0.05in, 1.3mm, or 1.4mm hex wrench for screws
Silicone shock/diff oil. Shocks should not be fully filled; add only enough oil for a heavy coating. 2000-3000cSt is a good starting weight.
Reservoir is for aesthetics only and is non-functional
Features:
Machined aluminum construction
Threaded shock bodies for quick pre-load adjustments
Scale-looking reservoir (non-functioning; for scale only)
Two spring rates included
Replaces Axial AXI31612 SCX24 shock set
Specifications:
Extended length eye-to-eye: ~32.5mm
Compressed length eye-to-eye: ~24mm
Stroke: 8.5mm
Includes:
(4) shocks
(4) soft springs (black)
(4) firm springs (silver)
COMPATIBILITY:
SCX24
The Pro-Line Axial SCX24 1978 Chevy K10 Body is a great option to give your mini crawler that nostalgic step side look. This body features extreme details that recreate the body lines and squared off style of the iconic truck. Made from high quality polycarbonate, this body is a perfect fit for the Axial SCX24. Finish the look off with Hyrax tires mounted on Impulse wheels (PRO1019410 - Not Included). Get the '78 Chevy K10 body and hit the trail in classic Bowtie style.NOTE: Painted body is shown for illustrative purposes only. The body you receive will be clear and untrimmed.
Pro-Line 1978 Chevy K-10 Body and Hyrax 1.0" Pre-Mounted Tires for SCX24
Features:
Perfect fit for the Axial SCX24
Licensed Chevy K-10 Scale Looks
Menacing Front Grill and Iconic Squared-Off Fenders
Paint-then-peel Overspray Film Included
Made with Crystal Clear Polycarbonate
Made in the USA, since 1982
Specifications:
Scale: 1/24
Length: 8.25" (210 mm)Width: 3.5" (89 mm)Height: 2.6" (66 mm)Wheelbase: 5.25" (133 mm)
Material: Polycarbonate
Includes:
(1) 1/24 Axial SCX24 1978 Chevy K10 Body
(1) Window Masks
(1) Decal Sheet
This Pro-Line Axial SCX24 1946 Dodge Power Wagon Clear Body, is a replica body of the 1946 Dodge Power Wagon body for the popular SCX24 platform. This First Gen Power Wagon body style is made in 1:24 size that stays true to the original military-inspired 4x4 truck that civilians could purchase. The 1946 Power Wagon features a menacing flat front grill with large flat panel style fender flares just like the full scale truck. The body includes all the details built into the body to complete the look of this iconic truck in a miniature scale. The Power Wagon is a direct fit onto the Jeep Wrangler JLU version of the SCX24, while the other SCX24 versions will require additional body mount parts for a proper fit.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
Realistic 1946 Power Wagon Body in 1:24 Scale!
Menacing Front Grill and Large Fender Flares
Great for Displaying Paint Color Options
Paint-then-peel Overspray Film Included
Made with Crystal Clear Polycarbonate
Made in the USA, since 1982
Includes:
(1) 1946 Dodge Power Wagon Clear Body
Paint-then-peel Overspray Film
Team FastEddy Axial SCX24 Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(2) 2x5x2.5
(16) 3x6x2.5
(2) 4x8x3
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK your R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
COMPATIBILITY:
Axial SCX24
The Axial SCX24 Rear Axle is a replacement rear axle intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one assembled rear axle.
The Exclusive RC SCX24 Jeep 1/24 Scale Inner Fender Floor Kit is a great way to fill the gap in the fenders, and hide the wires and extra bits peaking out from under the body. These inner fenders also allow use of the optional side step nerf bars (EXC-ERC-24-C-1024 - not included) to finish off the look. Package includes left and right side inner fenders.
COMPATIBILITY:
Axial SCX24
Hot Racing Axial SCX24 Aluminum Transmission Case.
Features:
CNC machined aluminum construction
Replaces factory plastic transfer case housing
Direct fit hop up requires no model modification for use
Anodized black for durability, corrosion resistance, and aesthetics
Secondary-processed machined beveled edges
High strength steel hardware
Includes:
(1) 2-piece transmission case
(3) 8mm Cap screws
(2) 4mm cap screw
COMPATIBILITY:
Axial SCX24
The Axial AS-1 Micro Servo is a replacement micro servo intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one micro servo.
This is an optional RC4WD Axial SCX24 Headlight Insert, intended for use with the Axial SCX24 2019 Jeep Wrangler Mini Crawler. This insert is made of strong, durable nylon.
Specifications:
Total Weight: 0.03oz/1.1g
Includes:
(1) Micro Series Headlight Insert for Axial SCX24 1/24 Jeep Wrangler RTR
(2) M1 x 6mm Cross Head Cap Screws (Black)
(2) Regular M1 Silver Nuts
COMPATIBILITY:
SCX24
This is a pack of four Axial SCX24 1.0" BFGoodrich Krawler T/A Tires. These tires are included with the SCX24 1/24 1967 Chevrolet C10 Truck kits, but are a great upgrade for the 2019 Jeep Wrangler JLU and Deadbolt models as well.
The Axial SCX24 Shock Set is a replacement set of shocks intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains four shocks.
This is an optional Hot Racing Axial SCX24 Aluminum Steering Servo Mount. this mount is machined from quality aluminum and anodized black with silver chamfered edges.
Features:
CNC machined billet aluminum, anodized black
Secure servo mount over stock plastic mount
Stiffer Upper linkage mount
Installs easily with no modifications
Replace Axial plastic servo mount of AXI31609
Includes:
(1) Aluminum servo mount
COMPATIBILITY:
SCX24
The Hot Racing Axial SCX24 Stainless Steel Front/Rear Axle Skid Plate is a stainless steel skid plate option for the front or rear axle on the SCX24. This skid plate helps to provide increased protection from rock strikes, as well as helps to prevent hang ups to improve the ability to slide over rough terrain.
Features:
Formed from a single sheet of Stainless steel plate for the ultimate toughness
CNC 6061-T6 aluminum mount
Designed to reduce obstacle hang ups and improve slide over terrain
Attaches to front or rear axle housing using provided screws
Specifications:
Width: ~15mm
Thickness: 0.5mm
Weight: 6g
Includes:
(1) 6061 Aluminum mount
(1) skid plate
(2) M1.4 x 12 mm screw
(2) M1.4 X 10 mm Screw
(2) M1.4 x 4 mm Screw
COMPATIBILITY:
Axial SCX24
The Hot Racing Axial SCX24 Stainless Steel Center Belly Skid Plate is a stainless steel skid plate option compatible with any SCX24 model. This upgrade bolts over the factory rails to create protection from rock strikes and hangups.
Features:
Formed from a single sheet of Stainless steel plate for the ultimate toughness
Designed to reduce obstacle hang ups and improve slide over terrain
Bolts directly over the factory Steel Rail
COMPATIBILITY:
Axial SCX24
The Axial SCX24 Driveshaft Set is a replacement set of driveshafts intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains the parts needed to build two driveshafts; either short, medium or long.
The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24™ series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When it’s time for a break at work, set up an obstacle course with items on your desk for the SCX24™ Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If you’d rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon you’ll have a challenging trail for fresh air adventuring. Your truck’s water-resistant electronics save you from having to worry about wet track conditions when you crawl. With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. It’s designed to keep right on running through rough trails and tough climbs. The SCX24™ 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included.
Axial® AS-1 servo with servo saver
Dynamite® 7.4V 350mAh 30C LiPo battery
Dynamite® 180-size, 88T Brushed Electric Motor
Realistic 1967 Chevrolet C10 Truck body
Two bright LEDs in front bumper for night driving
True, full-time 4-wheel drive
3-Link front and 4-link rear suspension for optimal handling
Worm drive gears for front and rear axles that add ground clearance
Realistic steel frame rails for added strength
Hinged body system for easy access to on-board components
Full ball bearing drivetrain
Licensed wheels modeled after 1:1 Method Wheels
Licensed tires modeled after 1:1 BF Goodrich Tires