Made in the USA! Liquid mask is a spray-able, brush-able coating used to mask and protect your project when applying paint, trim colors, lettering, insignias, etc on plastic models and R/C car and truck bodies.Due to the composition of liquid mask, it is negatively affected by lower temperatures, which limits the shipping window to ensure fresh product. Important: Please always ensure to store the product in an environment above 40 degrees Fahrenheit. Do not allow to freeze!
This Tamiya 100ml TS-14 Black Lacquer Spray Paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
Spaz Stix "Solids" are opaque, brilliant colors perfect for every hobby project! These paints are easy to use base coat colors with incredible coverage and premium quality. While formulated for use on polycarbonate R/C bodies, Solids will work well on just about any paintable surface.
Spaz Stix Yellow Fluorescent paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Color so bright, you'd swear it glows! "Fluorescent" colors will spray out very clear, and will require several light coats to achieve best results. Applying too much paint at once will result in runs, cracks, and an uneven finish. After achieving an even finish with the Fluorescent color, you MUST apply Spaz Stix Solid White/Backer (SZX00200 or SZX00209), which will make your color "pop".All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces.
This is a 100ml can of Tamiya PS-29 Fluorescent Pink Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
The Spaz Stix Candy color line up is the real deal. The hard anodized metal colors give your R/C vehicle a bold and realistic look - delivering a custom paint job every time. Spaz Stix "Candy" paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Candy paints spray out very clear, and will require several light coats to achieve best results. The color will build in intensity with each coat, but at this point, the color will be very faint. After achieving an even finish with the Candy paint, you MUST use a backing color to make your paint job "pop". We recommend the following backer color combinations:
White (SZX00200 or SZX00209): Produces the brightest color, but the least amount of "depth"
Silver: Produces a bright, rich color, with some "depth"
Metallic Silver(SZX00300 orSZX00309): Produces the same results as silver, but with "sparkles". This is our favorite combination!
Gold: Produces a darker finished color, with the most depth.
Ultimate Mirror Chrome (SZX10000 or SZX10009): Produces a unique "colored chrome" effect. (Be sure to follow the instructions for using Ultimate Mirror Chrome)
All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Candy paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high lustre.
Pro-Line RC Body Airbrush Paint is specially formulated for Polycarbonate. Pro-Line’s Team of Innovators have painted thousands of RC car bodies over the years and now offers ready to spray R/C Body paints specially formulated to help you achieve the same jaw dropping results. Developed by R/C body painters for painters, this water-based airbrush paint is ultra-flexible, extremely durable and easy to use. Have the confidence that you are spraying the best! Ready to Spray This pre-thinned airbrush paint makes it easy to grab the color you want and spray without the hassle of mixing (using a 0.5mm tip @ 30psi). You may reduce the paint with Pro-Line Paint Reducer (PRO6324-00 - sold separately) for smaller tips or specific applications. Specially Formulated for Polycarbonate Bash, Crash, Race or Show, Team Pro-Line has done it all! Pro-Line R/C Paint is a high-performance durable water-based airbrush paint that is specially formulated to meet the extreme requirements of polycarbonate R/C Bodies. It is durable yet flexible to allow R/C bodies to deform and come back to their shape. You will not only get great performance, you also get the same color options chosen by the experts.
Pro-Line R/C Body Paint
Features:
Professional Results
Developed by R/C Painters for R/C Painters
Specially Formulated for R/C Bodies
Ready to Spray. Use right out of the bottle (with a 0.5mm tip @ 30psi)
Spray Without the Hassle of Mixing
Water Based
Extremely Durable and Ultra-Flexible
Easy to Use
May be reduced with PRO6324-00 Paint Reducer (Sold Separately) for smaller tips and other specific applications
Variety of Color Options
Made in the USA, since 1982
Directions:
Secure lid & shake well for 30 seconds for optimum color mixture blend
Use right out of the bottle (using a 0.5mm tip @ 30psi)
May be reduced with PRO6324-00 Paint Reducer for smaller tips and other specific applications
Spaz Stix Green Fluorescent paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Color so bright, you'd swear it glows! "Fluorescent" colors will spray out very clear, and will require several light coats to achieve best results. Applying too much paint at once will result in runs, cracks, and an uneven finish. After achieving an even finish with the Fluorescent color, you MUST apply Spaz Stix Solid White/Backer (SZX00200 or SZX00209), which will make your color "pop".All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces.
This is a 3.5 ounce can of Spaz Stix "Electric Blue" Fluorescent Spray Paint. Spaz Stix is the premier brand when it comes to high-end RC Paints... whether your a seasoned PRO or just breaking into the industry you'll find that nothing beats Spaz Stix when it comes to un-surpassed quality and ease of use!
This is a 3.5 ounce can of Spaz Stix "Fireball Orange" Fluorescent Spray Paint. Spaz Stix is the premier brand when it comes to high-end RC Paints... whether your a seasoned PRO or just breaking into the industry you'll find that nothing beats Spaz Stix when it comes to un-surpassed quality and ease of use!
This is a 100ml can of Tamiya PS-59 Dark Metallic Blue Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml (3oz) of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
The Spaz Stix Candy color line up is the real deal. The hard anodized metal colors give your R/C vehicle a bold and realistic look - delivering a custom paint job every time. Spaz Stix "Candy" paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Candy paints spray out very clear, and will require several light coats to achieve best results. The color will build in intensity with each coat, but at this point, the color will be very faint. After achieving an even finish with the Candy paint, you MUST use a backing color to make your paint job "pop". We recommend the following backer color combinations:
White (SZX00200 or SZX00209): Produces the brightest color, but the least amount of "depth"
Silver: Produces a bright, rich color, with some "depth"
Metallic Silver(SZX00300 orSZX00309): Produces the same results as silver, but with "sparkles". This is our favorite combination!
Gold: Produces a darker finished color, with the most depth.
Ultimate Mirror Chrome (SZX10000 or SZX10009): Produces a unique "colored chrome" effect. (Be sure to follow the instructions for using Ultimate Mirror Chrome)
All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Candy paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high lustre.
This is an Arrma Granite 4x4 Pre-Painted Body, intended for use with BLX 4x4 and Mega 4x4 Granite kits. This Granite 4X4 BLX bodyshell is the perfect replacement for the kit supplied item. Ideal if you want to freshen the look of your existing bodyshell. Strong and hard-wearing with ARRMA eye-catching trim scheme, this pre-painted, pre-decaled bodyshell is supplied trimmed and ready to fit straight to your vehicle.
Features:
High-quality molded body - Head-turning paint scheme
Pre-decaled with details ARRMA vinyl stickers that add stylish looks
Pre-trimmed and drilled for fast and easy installation
Includes:
(1) GRANITE 4X4 BLX Painted Decaled Trimmed Body (Orange/Black)
COMPATIBILITY:
Arrma Granite 4x4 550
SZX02050Yellow Fluorescent Airbrush Ready Paint, 2oz Bottle
Have you ever seen a neon sign in the middle of the night? Spaz Stix fluorescent paints are just as bright and vibrant. These colors are sure to make any car stand out on the track.Spaz Stix Yellow Fluorescent paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Color so bright, you'd swear it glows! "Fluorescent" colors will spray out very clear, and will require several light coats to achieve best results. Applying too much paint at once will result in runs, cracks, and an uneven finish. After achieving an even finish with the Fluorescent color, you MUST apply Spaz Stix Solid White/Backer (SZX00200 or SZX00209), which will make your color "pop".All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces.
Features:
Enamel based formula
Pre-thinned. Just pour it into your airbrush and spray.
This is a 100ml can of Tamiya PS-23 Gun Metal Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
Spaz Stix "Solids" are opaque, brilliant colors perfect for every hobby project! These paints are easy to use base coat colors with incredible coverage and premium quality. While formulated for use on polycarbonate R/C bodies, Solids will work well on just about any paintable surface.
This is a 100ml can of Tamiya PS-15 Metallic Red Lexan Spray Paint. These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one 1/10 scale model.
Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Warning: Never use these paints on plastic models.
This is a replacement Traxxas Rustler 4X4 VXL Pre-Painted Orange Body with Clipless Mounting. This brightly colored pre-painted body includes window, grille, lights and a decal sheet. It is assembled with the front and rear body mounts and rear body support clipless mounting.
COMPATIBILITY:
Rustler 4X4 (#67064-1)RUSTLER 4X4 BRUSHEDModel #67064-1RUSTLER 4X4 BRUSHED W/ LED LIGHTSRUSTLER 4X4 BRUSHED W/ LED LIGHTSModel #67064-61Rustler 4X4 VXL (#67076-4) showroom imageRUSTLER 4X4 BRUSHLESSModel #67076-4
Color Change Aerosol Paint, Green/Purple/Teal, 3.5oz Can
Not sure what color to paint your vehicle? Spaz Stix Color Changing paint is the perfect solution. This paint creates a "chameleon effect", which brings out a new color at every angle, especially in natural sunlight!Spaz Stix Green/Purple/Teal Color Change paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Always apply a fine mist of Spaz Stix Surface Pre-Prep (SZX90050 or SZX90059) to the surface you are working on before using the Color Change paint. This helps eliminate fingerprints and undesirable swirls in your paint job. Color Change paints spray out very clear, and will require several light coats to achieve best results. At this point, the color will be very faint. After achieving an even finish with the Color Change paint, you MUST apply Spaz Stix High Gloss Black/Backer (SZX00110 or SZX00119), which will make your color "pop".All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Color Change paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high lustre.
Features:
Enamel based formula
The Spaz Stix Candy color line up is the real deal. The hard anodized metal colors give your R/C vehicle a bold and realistic look - delivering a custom paint job every time. Spaz Stix "Candy" paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Candy paints spray out very clear, and will require several light coats to achieve best results. The color will build in intensity with each coat, but at this point, the color will be very faint. After achieving an even finish with the Candy paint, you MUST use a backing color to make your paint job "pop". We recommend the following backer color combinations:
White (SZX00200 or SZX00209): Produces the brightest color, but the least amount of "depth"
Silver: Produces a bright, rich color, with some "depth"
Metallic Silver(SZX00300 orSZX00309): Produces the same results as silver, but with "sparkles". This is our favorite combination!
Gold: Produces a darker finished color, with the most depth.
Ultimate Mirror Chrome (SZX10000 or SZX10009): Produces a unique "colored chrome" effect. (Be sure to follow the instructions for using Ultimate Mirror Chrome)
Spaz Stix "Solids" are opaque, brilliant colors perfect for every hobby project! These paints are easy to use base coat colors with incredible coverage and premium quality. While formulated for use on polycarbonate R/C bodies, Solids will work well on just about any paintable surface.
SZX00110High Gloss Black/Backer, Airbrush Ready Paint, 2oz Bottle
Spaz Stix High Gloss Black is an opaque (solid) color that can be used as a primary color in your paint scheme, and is specifically formulated to perform perfectly as the required backer for the Spaz Stix "Color Change" line of paints.All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces.
Features:
Enamel based formula
Pre-thinned. Just pour it into your airbrush and spray.
Spaz Stix Solid White is an opaque color that can be used as a primary color in your paint scheme, and is specifically formulated to perform perfectly as the required backer for the Spaz Stix "Fluorescent" line of paints. It can also be used to back the "Candy" colors to produce the lightest, brightest combination possible.All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces.
Features:
Enamel based formula
Pre-thinned. Just pour it into your airbrush and spray.
Candy Purple Dynamite Aerosol Paint, 3.5oz Can
The Spaz Stix Candy color line up is the real deal. The hard anodized metal colors give your R/C vehicle a bold and realistic look - delivering a custom paint job every time.Spaz Stix "Candy" paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Candy paints spray out very clear, and will require several light coats to achieve best results. The color will build in intensity with each coat, but at this point, the color will be very faint. After achieving an even finish with the Candy paint, you MUST use a backing color to make your paint job "pop". We recommend the following backer color combinations:
White (SZX00200 or SZX00209): Produces the brightest color, but the least amount of "depth"
Silver: Produces a bright, rich color, with some "depth"
Metallic Silver(SZX00300 orSZX00309): Produces the same results as silver, but with "sparkles". This is our favorite combination!
Gold: Produces a darker finished color, with the most depth.
Ultimate Mirror Chrome (SZX10000 or SZX10009): Produces a unique "colored chrome" effect. (Be sure to follow the instructions for using Ultimate Mirror Chrome)
All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Candy paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high lustre.
Features:
Enamel based formula
Color Change Aerosol Paint, Gold/Orange/Purple/Red, 3.5oz Can
Not sure what color to paint your vehicle? Spaz Stix Color Changing paint is the perfect solution. This paint creates a "chameleon effect", which brings out a new color at every angle, especially in natural sunlight!Spaz Stix Gold/Orange/Purple/Red Color Change paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Always apply a fine mist of Spaz Stix Surface Pre-Prep (SZX90050 or SZX90059) to the surface you are working on before using the Color Change paint. This helps eliminate fingerprints and undesirable swirls in your paint job. Color Change paints spray out very clear, and will require several light coats to achieve best results. At this point, the color will be very faint. After achieving an even finish with the Color Change paint, you MUST apply Spaz Stix High Gloss Black/Backer (SZX00110 or SZX00119), which will make your color "pop".All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Color Change paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high lustre.
Features:
Enamel based formula
Spaz Stix Pearl Paint provides an amazingly deep finish with it's high pearl content. This unique product sprays on transparent, then when backed with a solid color, creates a beautiful iridescent effect, giving your R/C body a very "high-end" look!*IMPORTANT: When sprayed, this color is very translucent (see through), and it will appear that little or no color is being applied. Please be sure to apply a few even coats and let dry before applying the backer. Do not apply heavy coats, as any "runs" in the paint will cause an uneven finish. The backer color will show through the pearl, creating the desired iridescent effect. Our favorite is to back with black for a dark, deep finish, or white for that classic pearl look, but you can experiment with the backer color of your choice to create truly custom, one-of-a-kind finishes. You can even "double-stack" Pearls to get more than one highlight.All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Pearl paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high luster.
Spaz Stix Pearl Paint provides an amazingly deep finish with it's high pearl content. This unique product sprays on transparent, then when backed with a solid color, creates a beautiful iridescent effect, giving your R/C body a very "high-end" look!*IMPORTANT: When sprayed, this color is very translucent (see through), and it will appear that little or no color is being applied. Please be sure to apply a few even coats and let dry before applying the backer. Do not apply heavy coats, as any "runs" in the paint will cause an uneven finish. The backer color will show through the pearl, creating the desired iridescent effect. Our favorite is to back with black for a dark, deep finish, or white for that classic pearl look, but you can experiment with the backer color of your choice to create truly custom, one-of-a-kind finishes. You can even "double-stack" Pearls to get more than one highlight.All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Pearl paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high luster.
Spaz Stix "Solids" are opaque, brilliant colors perfect for every hobby project! These paints are easy to use base coat colors with incredible coverage and premium quality. While formulated for use on polycarbonate R/C bodies, Solids will work well on just about any paintable surface.
This is a replacement Traxxas Maxx Pre-Painted Truck Body. This body is intended for use with the Traxxas Maxx Monster Truck. Package includes one factory assembled body, with roof skid, body mount assembly, and decal sheet.
COMPATIBILITY:
Traxxas Maxx
SZX02350Purple Fluorescent Airbrush Ready Paint, 2oz Bottle
Have you ever seen a neon sign in the middle of the night? Spaz Stix fluorescent paints are just as bright and vibrant. These colors are sure to make any car stand out on the track.Spaz Stix Purple Fluorescent paint is a translucent (see through) color that when applied correctly, will produce eye-popping results. Color so bright, you'd swear it glows! "Fluorescent" colors will spray out very clear, and will require several light coats to achieve best results. Applying too much paint at once will result in runs, cracks, and an uneven finish. After achieving an even finish with the Fluorescent color, you MUST apply Spaz Stix Solid White/Backer (SZX00200 or SZX00209), which will make your color "pop".All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces.
Features:
Enamel based formula
Pre-thinned. Just pour it into your airbrush and spray.
Features:
Enamel based formula
Pre-thinned. Just pour it into your airbrush and spray.
SZX00359Light Orange Metallic Aerosol Paint, 3.5oz Can
Spaz Stix Metallic paints give a brilliant sparkle that really makes your project stand out in the crowd. Whether you're going for that old school Hot Rod look, or just looking for something unique, this paint is for you!Spaz Stix Metallic paints are opaque colors that are loaded with "flakes" which really dazzle in the light, especially direct sunlight. Metallics will require 3-4 even coats, and the end result can be slightly lightened or darkened when choosing your backer color (we recommend white, silver, or black). While formulated for use on polycarbonate R/C bodies, Metallics will work well on just about any paintable surface.
Specifications:
Enamel based formula
The Airbrush Tool Wash can be used to clean your airbrush between color applications, and when finished painting, so it is ready for the next use. Convenient can and screw top lid make it easy to use and store!
This is a bottle of Spaz Stix "Electric Blue" fluorescent paint! Spaz Stix is the premier BRAND when it comes to high-end RC Paints... whether your a seasoned PRO or just breaking into the industry you'll find that nothing beats Spaz Stix when it comes to un-surpassed quality and ease of use!
Spaz Stix Paint - Fireball Orange Fluorescent & Electric Blue Fluorescent
NOTE: Spaz Stix paints now comes 2oz to a package, and you may receive a single 2oz bottle of paint, or two 1oz bottles in a package. Either way the total amount of paint is always 2oz.
Spaz Stix Pearl Paint provides an amazingly deep finish with it's high pearl content. This unique product sprays on transparent, then when backed with a solid color, creates a beautiful iridescent effect, giving your R/C body a very "high-end" look!*IMPORTANT: When sprayed, this color is very translucent (see through), and it will appear that little or no color is being applied. Please be sure to apply a few even coats and let dry before applying the backer. Do not apply heavy coats, as any "runs" in the paint will cause an uneven finish. The backer color will show through the pearl, creating the desired iridescent effect. Our favorite is to back with black for a dark, deep finish, or white for that classic pearl look, but you can experiment with the backer color of your choice to create truly custom, one-of-a-kind finishes. You can even "double-stack" Pearls to get more than one highlight.All Spaz Stix paints are formulated for use on polycarbonate material. Specifically, clear bodies for R/C cars and trucks. Be sure to test compatibility when using on other surfaces. If using for on an "external" application, apply the backer as a base coat, rather than after the Pearl paint. You will also need to apply a quality clear coat (SZX90109) to achieve a high luster.
