This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included "Power Cell" Batteries. This charging system uses the Traxxas iD Battery Identification and is a great solution if you need batteries and a charger for a Traxxas vehicle requiring two 3S LiPo batteries; such as the X-MAXX Monster Truck and X0-1 Supercar. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries for use.
iD SimplicityWith iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.
Traxxas' Most Powerful ChargerFaster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.
TRA2972 Charger Specifications:AC Input: 100–240 VoltsCharge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.)Discharge Current Range: 500mAhCurrent Drain For Balance Ports: 500mAhNiMH Battery Cell Count: 5–8 CellsLiPo Cell Count: 2–3 CellsNet Weight: 575gDimensions: 176x138x57mm
TRA2872X Battery Specifications:Type: LiPoTotal Capacity: 5000Voltage: 11.1Continuous Discharge: 25C (125A)Max Burst Rate: 50C (250A)Watt Hours: 55.5Charge Rate: 1C (5A)Max Charge Rate: 2C (10A)Dimensions: 155x26x44mmWeight: 13.3oz (376g)
Includes:
(1) TRA2972: Dual iD Battery Charger
(2) TRA2872X: 5000mAh 3S 25C LiPo Battery w/iD
COMPATIBILITY:
Traxxas 4-Tec 2.0
Traxxas E-Maxx
Traxxas E-Revo VXL 2.0
Traxxas Rally
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Spartan
Traxxas TRX-4
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XO-1
This is the Spektrum RC Firma 8S 160 Amp Brushless Smart ESC, a feature packed ESC that delivers power and intelligence in an all-in-one package - no additional vehicle module or links required. This 160A brushless ESC gives your large scale vehicle the ultimate drive while feeding real-time telemetry straight to your radio.
Features:
Smart all-in-one telemetry
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple programming options
Multi-point protection
Specifications:
Continuous Current: 160A
Peak Current: 1050A
Motor: Sensorless Brushless
Applications: Large Scale Surface
Input: 3S-8S Lipo
BEC Output: 6V/8.4V @ 5A
Dimensions: (LxWxH) 70mmx55mm (77mm At tabs) x44mm (2.8"x2.2" (3.0" at Tabs) x 1.7")
Battery Connector: IC5 (EC5 Compatible)
Motor Connector: Female 6.5mm bulletWeight: 280g (9.9oz)Modes: Forward/Reverse/Brake; Forward/Brake; Forward/ReverseFan: YesConstruction: Plastic with aluminum heat sink
COMPATIBILITY:
Arrma Kraton 8S BLX
Here's What You Get When You Buy This Product:2 -EC5 Charging Adapter with Banana Plugs 2- Lectron Pro 7.4V 5200mAh 50C Lipo Battery with EC5 Connector for 1/10th Scale Cars & Trucks - Losi, ECX1 - SkyRC T200 - Dual 12A/200W AC/DC Charger
Here's What You Get When You Buy This Product:2 - EC3 Charging Adapter with Banana Plugs 2 - Lectron Pro 7.4V 5200mAh 35C Lipo Battery with EC3 Connector for 1/10th Scale Cars & Trucks - Losi, ECX 1 - SkyRC T200 - Dual 12A/100W AC/DC Charger
This 22.2V (6S) 6500mAh 100C lithium polymer battery pack provides the ultimate in performance and run time for larger RC trucks like the Arrma Kraton, Outkast and Notorious 6S versions. It's also a great choice for a large variety of 1/5 and 1/6-scale trucks, plus many large planes, multirotors and helicopters.
Compatible With:
Many 1/5 thru 1/8-scale vehicles
Large Multirotors
EDF Jets
Large Helicopters
Dimensions:
Length: 136mm (5.36 in.)
Width: 45mm (1.78 in.)
Height: 67mm (2.64 in.)
Weight: 850g (29.99 oz)
Huge run time and power for large scale vehicles!
This 14.8V (4S) 10000mAh 100C lithium polymer battery pack features a soft-pack construction and is the perfect size and shape for use in tons of 1/8-scale and larger buggies and trucks. With a 100C continuous discharge rate, this lipo is built to give you elite-level performance from the most powerful brushless motor setups available.
Dimensions:
Length: 166mm (6.54 in.)
Width: 48mm (1.89 in.)
Height: 41mm (1.61 in.)
Huge run time and power for 1/8 scale vehicles!
This 14.8V (4S) 7600mAh 75C lithium polymer battery pack features a hard outer case and is the perfect size and shape for use in tons of 1/8-scale buggies and trucks. With a 75C continuous discharge rate, this lipo is built to give you elite-level performance from the most powerful brushless motor setups available.
Dimensions:
Length: 138mm (5.43 in.)
Width: 47mm (1.85 in.)
Height: 48mm (1.89 in.)
Weight: 626g (22.08 oz)
4S7600-755
The Dynamite Passport P2 100W AC/DC 2-Port Multicharger with Bluetooth Connectivity provides seamless integration to select Dynamite "P" Series chargers by bringing real-time monitoring to your mobile device. You can monitor the charge status of your batteries, view real time battery stats including; battery type, battery cells, charge current, voltage, battery capacity, battery charge level and more. Simply download the app, pair your mobile device to the compatible Dynamite P-Series charger via Bluetooth and take advantage of viewing real-time charge stats while monitoring your battery's charge process. With Bluetooth communication, the Dynamite Dashboard puts your charge setting control at your fingertips.
Thanks to Dynamite's QR Scan with Smartphone control functionality, you can scan the QR code on your Dynamite Reaction 2.0 batteries to automatically set the optimal charge settings for that specific battery making using Dynamite "P" Series chargers easy, convenient and safe. Additionally, you have the ability to create your own QR codes for any battery line/specs.
Features:
Powerful 100W AC/DC Multi-Charger
Two channels charge two different kinds of batteries simultaneously
Charges Lipo, LiHV, LiFe NiMH/NiCd, and Pb batteries
Charges 1-6 cell Lipo/ LiHV/LiFe, 1-15 cell NiMh/NiCd, and 2-20V Pb
Dynamite Dashboard-Smart phone control and monitor via Bluetooth
High visibility, simplified LCD interface
Built-in balancing ports
Integrated voice functionality
5-year limited warranty
Specifications:
Discharge: Yes
Low Input Voltage Protection: Yes
Input Voltage: 100-240V AC or 11-18V DC
Maximum Charge Rate: 0.1A-10A x 2
Maximum Continuous Discharge Rate: 0.10A-2.0A x 2
Voltage Meter: Yes - on main LCD display
Display: Yes
Reverse Polarity Protection: Yes
Model Memory: Yes
Output Connector: Banana Plug to EC3
Peak Detection: Yes
Output: 100W max AC, 200W DC
Safety Timer: Yes
Battery Temperature Monitoring: Yes - Temperature Sensor not included
Over Current Protection: Yes
Battery Balance Connector: XH Balancing Adapter Board
Selectable Charge Rate: Yes - Incremental (0.1A Increments)
Input Connector: AC cord, detachable, North American plug
Short Circuit Protection: Yes
Thermal Protection: Yes
Cooling Method: Cooling fan
Programmable: Yes
Integrated Balancing: Yes - Internal Balancer & External Adapter
Product Height: 2.6" (67mm)
Product Width: 6.0" (153mm)
Product Length: 5.5" (140mm)
Product Weight: 1.4lbs (668g)
Amp Meter: Yes - on main LCD display
You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Integrated microchip stores unique parameters for each battery
Smart discharge allows batteries to automatically discharge to a safe voltage
Save time and hassle, while improving battery life
Powerful 100C continuous discharge rating to deliver maximum performance and longevity
Protective outer metal alloy sheet helps dissipate heat, hold battery shape, and increase durability
No soldering required, equipped with IC3 and IC5 Connectors that are compatible with EC3 and EC5
100C battery packs are available in a variety of capacities and cell counts that are perfect for almost any application
The Gens Ace Bashing Pro 4s has been specifically designed for Arrma vehicles which can utilize a high capacity battery such as this - specifically the Kraton 8S vehicles, and others which can accept this large capacity battery. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Features:
Large-capacity battery specially designed for ARRMA vehicles to maximize battery life.
Better grip in the battery tray.
PC material and silicon rubber case provides dual protection.
Specifications:
Minimum Capacity: 11000mAh
Configuration: 4S1P / 14.8V
Discharge Rate: 100C
Max Burst discharge Rate: 200C
Net Weight(±20g): 963
Dimensions: 178x51x51mm (LxWxH)
Balancer Connector Type: JST-XHDischarge Connector Type: EC5
COMPATIBILITY:
Arrma Kraton 8S BLX
The Gens Ace Bashing Pro 3S has been specifically designed for Arrma vehicles which can utilize a high capacity battery such as this - specifically the Kraton 8S vehicles, and others which can accept this large capacity battery. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Features:
Large-capacity battery specially designed for ARRMA vehicles to maximize battery life.
Better grip in the battery tray.
PC material and silicon rubber case provides dual protection.
Specifications:
Minimum Capacity: 15000mAh
Configuration: 3S2P/ 11.1V
Discharge Rate: 100C
Max Burst discharge Rate: 200C
Net Weight(±20g): 984g
Dimensions: 175x50x50mm (LxWxH)
Balancer Connector Type: JST-XH Discharge Connector Type: EC5
COMPATIBILITY:
Arrma Big Rock 3S BLX
Arrma Felony 6S BLX
Arrma Granite 3S BLX
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Kraton 6S BLX
Arrma Limitless
Arrma Mojave
Arrma Mojave 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
Arrma Senton 3S BLX
Arrma Typhon 3S BLX
Arrma Typhon 6S BLX
The Spektrum Smart S1500 DC LiPo Smart Charger is perfect for large batteries that require large amounts of charging power. Compact enough to carry in a pocket or field bag, the S1500 easily goes with you to the field, track, or any place where you need to charge your LiPo and NiMH batteries.
The S1500 charger's improved, extra-precise scroll wheel interface simplifies setup. When used with Spektrum Smart LiPo batteries having IC3 or IC5 connectors, the S1500 also uploads specific parameters and health data from the battery's integrated memory chip and displays it on the bright LCD screen for review — giving you the information you need to evaluate your packs and make the best charging decisions.
For input power, use a Spektrum Power Supply unit (SPMXC10201, available separately) or any compatible DC power source with the included IC3 power cable adapter. The S1500 charger has a USB port, a software update port, plus a safety timer and protection against heat, reverse polarity, short circuit, over-current, and low input voltage.
Features:
High 500W output quickly charges large, high-capacity and high cell count batteries with ease
Ideal for use with Spektrum™ Smart batteries featuring the IC3 or IC5 connector
Smart Technology recognizes unique Smart battery data for safe, convenient charging
Can also be used to charge batteries without Smart Technology
Enhanced touch wheel interface improves setup ease and precision
2.4-inch LCD screen with auto-brightness is easy to read even in extreme sunlight
Compact design with rounded edge fits in a bag or pocket for easy carrying
Internal cooling fan maintains a safe, efficient operating temperature
Note: This charger supports IC5 batteries, but does not include the IC5 lead. The IC5 connector (SPMXCA507) is sold separately.
Specifications:Application: Battery Charger for Electric Powered RC Vehicles and AircraftBattery Balance Connector: JST-XHBattery Temperature Monitoring: Yes, Temperature Sensor IncludedBattery Type: 1-6S LiPo, LiFe, LiHv / 1-16C NiMH, NiCd, PbCircuit Breaker: YesCooling Method: FanDisplay: 2.4" 320x320 IPS LCDHeight: 1.9" (50mm)Input Voltage: 8-30VIntegrated Balancing: Y - Internal Balancer & External AdapterLength: 3.7" (95mm)Low Input Voltage Protection: YesMaterial: Plastic CaseMaximum Charge Rate: 26.1V, 20AModel Memory: Smart IDOutput Connector: IC3 (compatible with EC3)Over Current Protection: YesPC Connectivity: Yes - USB, external adapter requiredPC Required: NoPeak Detection: YesReverse Polarity Protection: YesSafety Timer: YesSelectable Charge Rate: Yes - Incremental (0.1A Increments)Short Circuit Protection: YesSoftware Updates: Yes, via USB PortThermal Protection: YesType: DC Powered Smart Battery ChargerWeight: 8.5oz (240g)Width: 3.8" (97mm)
Includes:
(1) Spektrum™ S1500 DC Smart Charger
(1) IC3™/Banana Power Supply Cable
(1) Product Manual
Needed to Complete:
Spektrum™ Power Supply unit (see Completion Guide or Optional Accessories) or any compatible DC power source
Here's What You Get When You Buy This Product:1 - e680 1S-6S 80W 8A Multi-Chemistry Balancing Charger (LiPo/LiFe/LiHV/NiMH) 1 - EC5 Charging Adapter with Banana Plugs 1 - Lectron Pro 11.1V 5200mAh 50C Lipo Battery with EC5 Connector
Here's What You Get When You Buy This Product:1-e680 1S-6S 80W 8A Multi-Chemistry Balancing Charger (LiPo/LiFe/LiHV/NiMH) 1-Lectron Pro 11.1V 5200mAh 50C Lipo Battery with EC3 Connector
Spektrum Smart technology LiPo Batteries practically take care of themselves. When combined with a Spektrum™ Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant it’s connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition!
Spektrum Smart technology puts you in complete control, makes you more aware and more confident about the capability of your equipment—all the while making your hobby easier. The combined result will make you wish everything about your hobby was “smarter.”
You’ll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger “Start” button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3 or IC5 output connector that’s conveniently compatible with older devices equipped with robust EC3 and EC5 connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you’ve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the “Start” button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Features
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microship Stores Unique Parameters for Each Battery
IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life
Smart Discharge Allows Batteries to Automatically Discharge to a Safe Voltage
Specifications:
Type: Smart LiPoCapacity: 5000 mAhVoltage: 14.8VConnector Type: IC5Wire Gauge: 12Number of Cells: 4Weight: 1.09 lbs (495 g)Configuration: 4S1PLength: 5.4 in (138mm)Width: 1.8 in (47mm)Height: 1.5 in (40mm)Application: SurfaceMaximum Continuous Discharge : 100C
CHARGING NOTE: This battery can only be safely charged with a Spektrum Smart Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Spektrum Smart Battery Charger.
Traxxas EZ-Peak Dual 100W NiMH/LiPo dual charger with iD Auto Battery Identification
Assessory part for these models:
1/16 E-REVO VXL RTR W/TSM Model #71076-3
2017 FORD RAPTOR Model #58094-1
BANDIT 1/10 EXTREME SPORTS BUGGY Model #24054-1
BANDIT: 1/10 EXTREME SPORTS BUGGY Model #24054-4
BIGFOOT NO. 1 Model #36034-1
BIGFOOT RTR W/XL-5 ESC Model #36084-1
BLAST RTR BOAT W/ESC WITH TQ RADIO SYSTEM Model #38104-1
DCB M41 WIDEBODY, NO BATTERY OR CHARGER Model #57046-4
E-REVO 2 Model #86086-4
E-REVO BRUSHLESS 4WD W/TSM Model #56086-4
FORD FIESTA ST RALLY Model #74054-4
JATO 3.3 W/2.4GHz RADIO Model #55077-3
MAXX WITH 4S ESC Model #89076-4
NITRO RUSTLER WITH TSM Model #44096-3
NITRO SLASH 2WD W/TSM Model #44056-3
NITRO SPORT W/RADIO Model #45104-1
REVO 3.3 4WD NITRO MONSTER TRUCK Model #53097-3
RUSTLER 4X4 BRUSHED Model #67064-1
RUSTLER 4X4 BRUSHLESS Model #67076-4
Rustler 4X4: 1/10-scale 4WD Stadium Truck Model #67064-4
RUSTLER VXL RTR W/TSM Model #37076-3
RUSTLER VXL RTR W/TSM Model #37076-4
RUSTLER: 1/10 SCALE STADIUM TRUCK Model #37054-4
RUSTLER: 1/10 SCALE STADIUM TRUCK Model #37054-1
SKULLY RTR W/2.4GHZ RADIO Model #36064-1
SLASH 2WD KIT Model #58014-4
SLASH 4X4 1/10 4WD OBA & TSM Model #68086-24
SLASH 4X4 1/10 SCALE 4WD TSM Model #68086-4
SLASH 4X4 BRUSHED Model #68054-1
SLASH 4X4 BRUSHED Model #68054-4
SLASH 4X4 ULTIMATE Model #68077-4
SLASH RTR WITH OBA Model #58034-2
SLASH RTR WITH TQ RADIO Model #58034-1
SLASH VXL 2WD BRUSHLESS OBA & TSM Model #58076-24
SLASH VXL 2WD BRUSHLESS W/TSM Model #58076-4
SPARTAN BRUSHLESS 36 INCH BOAT TSM Model #57076-4
STAMPEDE - NO BATTERY/CHARGER Model #36054-4
STAMPEDE 4X4 1/10 SCALE W/TSM Model #67086-4
STAMPEDE 4X4 BRUSHED Model #67054-1
STAMPEDE 4X4 KIT Model #67010-4
STAMPEDE 4X4 KIT W ELECTRONICS Model #67014-4
Stampede VXL Model #36076-3
STAMPEDE VXL RTR W/TSM Model #36076-4
Stampede®: 1/10 Scale Monster Truck with TQ 2.4GHz radio system Model #36054-1
SUMMIT 4WD ELECTRIC MONSTER TRUCK Model #56076-4
TRX-4 1979 Chevrolet Blazer Model #82076-4
TRX-4 1979 Ford Bronco Model #82046-4
TRX-4 CRAWLER KIT Model #82016-4
TRX-4 CRAWLER W/ XL5 HV Model #82056-4
TRX-4 Equipped with TRAXX Model #82034-4
TRX-4 Mercedes-Benz G 500 4x4² Model #82096-4
TRX-4 SPORT Model #82024-4
TRX-4 SPORT KIT Model #82010-4
TRX-6 Mercedes-Benz G 63 AMG 6x6 Model #88096-4
X-MAXX WITH 8S ESC Model #77086-4
Assessory part for these models:
1/16 E-REVO RTR W/ESC Model #71054-1
1/16 SLASH 4WD RTR W/ ESC Model #70054-1
4-TEC 2.0 W/O BODY, BRUSHED Model #83024-4
4-TEC 2.0 W/O BODY, BRUSHLESS Model #83076-4
4-TEC 2.0, FORD GT Model #83056-4
4-TEC 2.0, MUSTANG BODY Model #83044-4
BANDIT VXL RTR W/TSM Model #24076-4
SLASH 4X4 PLATINUM Model #6804R
SLASH RTR W/ XL-5 ESC Model #58024
SLAYER PRO 4X4 RTR W/TSM Model #59076-3
T-MAXX 3.3 RTR W/2.4GHZ RADIO Model #49077-3
T-MAXX RTR WITH TQ RADIO Model #49104-1
UNLIMITED DESERT RACER Model #85076-4
UNLIMITED DESERT RACER Model #85086-4
XO-1 AWD SUPERCAR NO BATTERY W/ TSM Model #64077-3
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas EZ-Peak Multi-Chemistry Battery Charger System with an included "Power Cell" 4000mAh LiPo battery. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need a battery and charger for your Traxxas vehicle that runs one 3S LiPo battery.
iD SimplicityWith iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service.
2970 Charger Specifications:AC Input: 100–240 VoltsCharge Current Range: 1.0-4.0A (40W Max.)Discharge Current Range: 500mAhCurrent Drain For Balance Ports: 500mAhNiMH Battery Cell Count: 5–8 CellsLiPo Cell Count: 2–3 CellsNet Weight: 365gDimensions: 146 x 123 x 53mm
2849X Battery Specifications:Type: LiPoTotal Capacity: 4000Voltage: 11.1Continuous Discharge: 25C (100A)Max Burst Rate: 50C (200A)Watt Hours: 44.40Charge Rate: 2C (8A)Max Charge Rate: 2C (11.6A)Dimensions: 135x26x43mmWeight: 11.1oz (316g)
Includes:
(1) 2970 Battery Charger
(1) 2849X: 4000mAh 3S 25C LiPo Battery w/iD
COMPATIBILITY:
Traxxas Bandit
Traxxas Rustler
Traxxas Slash
Traxxas Stampede
This is the Traxxas EZ-Peak Multi-Chemistry Battery Charger System with an included "Power Cell" 5800mAh LiPo battery. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need a battery and charger for your Traxxas vehicle that runs one 2S LiPo battery.
iD SimplicityWith iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service.
TRA2970 Specifications:AC Input: 100–240 VoltsCharge Current Range: 1.0-4.0A (40W Max.)Discharge Current Range: 500mAhCurrent Drain For Balance Ports: 500mAhNiMH Battery Cell Count: 5–8 CellsLiPo Cell Count: 2–3 CellsNet Weight: 365gDimensions: 146 x 123 x 53mm
TRA2843X Battery Specifications:Type: LiPoTotal Capacity: 5800Voltage: 7.4Continuous Discharge: 25C (145A)Max Burst Rate: 50C (290A)Watt Hours: 42.92Charge Rate: 1C (5.8A)Max Charge Rate: 2C (11.6A)Dimensions: 137x25x43mmWeight: 10.9oz (308g)
Includes:
(1) TRA2970 Battery Charger
(1) TRA2843X: 5800mAh 2S 25C LiPo Battery w/iD
COMPATIBILITY:
Traxxas 1/8 Funny Car
Traxxas 4-Tec 2.0
Traxxas Bandit
Traxxas E-Maxx
Traxxas E-Revo
Traxxas Hoss
Traxxas Rally
Traxxas Rustler
Traxxas Rustler 4x4
Traxxas Slash
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Spartan
Traxxas Stampede
Traxxas Stampede 4x4
Traxxas Summit
Traxxas TRX-4
Traxxas TRX-4
Traxxas X-Maxx
Traxxas XO-1
This is the Traxxas EZ-Peak Live Multi-Chemistry Battery Charger, with iD Auto Battery Identification. There has never been an easier or safer way to charge your batteries than with the Traxxas iD system. Now you can bring that technology to bear using your smartphone or tablet! Connect to the EZ-Peak Live app on your mobile device to experience a high definition graphical user interface. Your mobile device now becomes a powerful tool to check battery cell voltage, monitor charge status, create and store battery profiles, receive alerts, and access advanced user functions and information.
The EZ-Peak Live charger recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Live does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Live Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Advanced high-resolution peak detection deliver a perfect charge every time. Parental lock function for worry-free iD-only charging, or full manual control through the free Traxxas EX-Peak Live app.
NOTE: Accessing some charger features requires a mobile device with Bluetooth® capability (sold separately) and the Traxxas EZ-Peak Live Application. Available here for iOS and here for Android.
Comparing Traxxas iD Battery Chargers & LiPo Accessories
Features:
Charger:
100-Watt 12-amp output
Recognizes Traxxas iD-equipped batteries to automatically program and optimize charger settings
LED charge progress indicator
Optimized for faster LiPo balance charging
One button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Easy to use interface
Supports Traxxas EZ-Peak Live Application
Audible alerts
Built-in cooling fan
Advanced Mode for full manual control through EZ-Peak Live App
Legacy support for all Traxxas High-Current Connectors
Built-in balance port for conventional LiPo batteries
Charges 5-8-cell NiMH batteries
Charges 2s, 3s, and 4s LiPo Batteries
EZ-Peak Live App:
Check battery cell voltage, estimated time remaining, and mAh added
Configure charge settings with an easy-to-use graphical interface
Recognizes and remembers settings for up to 4 connected chargers
Pass code lock prevents access to manual mode
Create Battery Profiles and store commonly used settings
Upload firmware updates to charger to get the latest features
Remote monitoring and alerts for up to 4 chargers
iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors
Click here for iOS App
Click here for Android App
Specifications:AC Input: 100–240 Volts, 50-60Hz, 1.5ACharge Current Range: 1.0-12.0ADischarge Current Range: 665mAhCurrent Drain For Balance Ports: 665mAhNiMH Battery Cell Count: 5–8 CellsLiPo Cell Count: 2–4 CellsNet Weight: 526gDimensions: 133 x 169 x 55mm
Overview
Features
Large-capacity battery specially designed for ARRMA vehicles to maximize battery life.
Stable automatic stacking technology enables high single-cell capacities.
Production in the most strict single cell capacity, voltage, resistance and discharge curve matching process
Long cycle life with 150 times minimum, up to 200Wh/kg energy density.
High reliability and automatic production line to guarantee high quality and consistent performance.
Small in size and light in weight.
Better grip in the battery tray.
PC material and silicon rubber case provides dual protection.
Overview
This Gens ace Bashing Series 8000mAh 4S2P Lipo Battery Pack comes pre-equipped with the industry standard EC5 connector, no soldering required! With a maximum discharge rate of 100C, this 4S LiPo pack is ready to give you all the power you need, whatever your application. Gens Ace batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today! Trust Gens Ace for long LiFe and consistent durability run after run.
Bashing Batteries
Specifications
Application
Surface
Battery Type
LiPo (3.7V per cell)
Battery Voltage
14.8V
Capacity
8000mAh
Connector Type
EC5
Maximum Continuous Discharge Rate
60C
Same size as a standard 5000mAh car pack!
This 2-cell 7.4V 8000mAh 100C lipo is the same size as a standard 5000mAh lipo, perfect for 1/10 scale cars, trucks, and buggies! The huge 8000mah capacity means massively extended run times and the 100C continuous discharge rating means you'll get elite-level performance. Includes a Deans-type connector on the discharge leads.
Features
High-end performance and reliability at an affordable price
Perfect for 1/10 scale cars, trucks, and buggies
Features a huge capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need
Includes a Deans-type connector on the discharge leads
Dimensions:
Length: 138mm (5.43 in.)
Width: 47mm (1.85 in.)
Height: 25mm (0.98 in.)
Weight: 321g (11.32 oz)
Same size as a standard 5000mAh car pack!
This 2-cell 7.4V 8000mAh 100C lipo is the same size as a standard 5000mAh lipo, perfect for 1/10 scale cars, trucks, and buggies! The huge 8000mah capacity means massively extended run times and the 100C continuous discharge rating means you'll get elite-level performance. Includes an EC3 connector on the discharge leads.Also available with Deans and XT60 connectors!
Features
High-end performance and reliability at an affordable price
Perfect for 1/10 scale cars, trucks, and buggies
Features a huge capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need
Includes an EC3 connector on the discharge leads
Dimensions:
Length: 138mm (5.43 in.)
Width: 47mm (1.85 in.)
Height: 25mm (0.98 in.)
Weight: 321g (11.32 oz)
Same size as a standard 5000mAh car pack!
This 2-cell 7.4V 8000mAh 100C lipo is the same size as a standard 5000mAh lipo, perfect for 1/10 scale cars, trucks, and buggies! The huge 8000mah capacity means massively extended run times and the 100C continuous discharge rating means you'll get elite-level performance. Includes an XT60 connector on the discharge leads plus a Common Sense RC™ adapter to convert XT60 connectors for use with popular RC vehicles.
Features
High-end performance and reliability at an affordable price
Perfect for 1/10 scale cars, trucks, and buggies
Features a huge capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need
Includes an XT60 connector on the discharge leads plus a Common Sense RC™ adapter to convert XT60 connectors for use with popular RC vehicles
Dimensions:
Length: 138mm (5.43 in.)
Width: 47mm (1.85 in.)
Height: 25mm (0.98 in.)
Weight: 321g (11.32 oz)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas 3S, 11.1V, 6400mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current ConnectorRevolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:Type: LiPoTotal Capacity: 6400Voltage: 11.1Continuous Discharge: 25C (160A)Max Burst Rate: 50C (320A)Watt Hours: 71.04Max Charge Rate: 2C (12.6)Dimensions: 138x41x43mmWeight: 17.7oz (502g)
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
Specifications:
Type: LiPo
Total Capacity: 5000mAh
Voltage: 14.8V
C Rating: 25
Length: 155mm
Height: 34mm
Width: 45mmWeight: 16.8g
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
COMPATIBILITY:
Traxxas Maxx
Here's What You Get When You Buy This Product
Quantity
Lectron Pro 11.1V 5200mAh 50C Lipo Battery with XT60 Connector + CSRC adapter for XT60 batteries to popular RC vehicles
1
Power Mini - 2S-4S 50W 4A Multi-Chemistry Balancing Charger (LiPo/LiFe/LiHV/NiMH)
1
This 14.8V (4S) 5200mAh 50C lithium polymer battery pack is a high-performance option for a variety of different applications: 1/8-scale buggies and trucks, mid-size multirotors, EDF Jets, 3D helicopters and more. These lipo packs are made with our ultra-compact 5200mAh cells that give you a weight savings of up to 20% versus 5000-5200mAh lipos from many other manufacturers. That massive weight savings means lighter total loads for longer flight times and more agile, powerful performance from your vehicle or aircraft.
Compatible With:
1/8 Scale Buggies and Trucks
Mid-size Multirotors
EDF Jets
3D Helicopters
Dimensions:
Length: 130mm (5.12 in.)
Width: 42mm (1.65 in.)
Height: 32mm (1.26 in.)
Weight: 440g (16.08 oz)
This 14.8V (4S) 5200mAh 50C lithium polymer battery pack is a high-performance option for a variety of different applications: 1/8-scale buggies and trucks, mid-size multirotors, EDF Jets, 3D helicopters and more. These lipo packs are made with our ultra-compact 5200mAh cells that give you a weight savings of up to 20% versus 5000-5200mAh lipos from many other manufacturers. That massive weight savings means lighter total loads for longer flight times and more agile, powerful performance from your vehicle or aircraft.
Compatible With:
1/8 Scale Buggies and Trucks
Mid-size Multirotors
EDF Jets
3D Helicopters
Dimensions:
Length: 130mm (5.12 in.)
Width: 42mm (1.65 in.)
Height: 32mm (1.26 in.)
Weight: 440g (16.08 oz)
The Spektrum S1200 Smart Charger is the first DC Charger to feature Spektrum smart charging and battery technologies that when combined make charging virtually any battery easier, faster, safer and more convenient than ever before.
GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Gens Ace LiPo Battery Packs
Specifications:Voltage: 11.1VCell Count: 3SCapacity: 5500mAhDischarge Rate: 60CMax Burst Discharge: 120CDimensions: 138x42x32mm (LxWxH)Weight: 406gBalance Tap: JST-XHConnector: EC5
This Gens Ace Bashing Pro 3S LiPo Battery Pack 120C comes equipped with a EC5 plug and is suitable for Arrma 1/7, 1/8 and 1/10 scale models. With a maximized discharge rate of 120C this battery pack provides all the power you will need. Package includes one 3S LiPo battery.Features:
Stable automatic stacking technology enables single-cell capacities of 6800mAh
Best raw material and excellent workmanship to fulfill customer needs
High reliability and automatic production line to guarantee high quality and consistent performance
Small in size and light in weight
Specifications:
Minimum Capacity: 6800mAh
Configuration: 3S1PVoltage: 11.1V - 3 cells
Discharge Rate: 120C
Max Burst Discharge Rate: 240C
Net Weight(±20g): 521g
Dimensions (LxWxH): 157x48x32mm
Balancer Connector Type: JST-XHR-4P
COMPATIBILITY:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Senton 3S BLX
Arrma Typhon 3S BLX
The Spektrum RC 3S Smart G2 LiPo 50C Battery Pack with IC5 Connector provides pilots and drivers with an array of Smart benefits; Not only are charging parameters and performance data stored and uploaded automatically to Smart chargers, but no balance lead is needed — just one easy IC connection.
Smart G2 batteries come from the factory programmed to discharge automatically to a safe storage voltage of 3.90V after 72 hours of inactivity. The benefits include longer battery life, better performance over the life of the pack, and the peace of mind that comes from knowing your Smart battery is maintenance-free. You can change the battery's Auto Storage settings based on your own preferences. G2 batteries also offer a storage discharge rate that's three times faster than the previous G1 Smart batteries.
Enjoy the Smart Battery advantage of not having to set your own charging preferences. When a Smart G2 LiPo battery is connected to a Spektrum Smart charger, its unique charging parameters and health information upload to the charger from the battery's integrated memory microchip. Through the charger you can view and set preferences such as charge rates, so all that's required to charge the pack is connecting it to your Smart charger. That's the Smart Battery Advantage!
Note: G2 batteries require the use of a Spektrum™ G2 Smart Charger or earlier Smart Charger with G2 update.
Features:
Simpler and safer to use
Balance charge through the IC3® or IC5® connector data wire — with only one connection, no balance lead required
Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance
Thicker internal metal side plates protect cells and improve heat dissipation
Integrated microchip stores unique parameters for each battery
IC3® and IC5® connectors are also compatible with EC3™ and EC5™ styles
Specifications:
Battery Type: LiPo (3.7V per cell)
Application: Surface
Number of Cells: 3
Maximum Burst Discharge Rate: 50C
Battery Capacity: 5000-5999mAh
Connector Type: IC5
Battery Voltage: 11.1V
Product Weight: 14.28oz (405g)
Product Width: 1.83" (46 mm)
Wire Gauge: 10 AWG
Product Length: 5.45" (138 mm)
Capacity: 5000mAh
Watt Hours: 55.5
Charge Protection Circuitry: Yes
Hard Case: Yes
Normal/Standard Charge Current: 5A
Battery Balance Connector: G2 Smart
Product Height: 1.37" (35 mm)
Normal/Standard Charge Rate: 5C
This is the Traxxas 2S, 7.4V, 7600mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current ConnectorRevolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD ChargerThe Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:Type: LiPoTotal Capacity: 7600Voltage: 7.4Continuous Discharge: 25C (190A)Max Burst Rate: 50C (380A)Watt Hours: 56.24Charge Rate: 1C (7.6A)Max Charge Rate: 2C (15.2A)Dimensions: 155x27x43mmWeight: 13.8oz (390g)
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
COMPATIBILITY:
Traxxas 4-Tec 2.0
Traxxas E-Maxx
Traxxas E-Revo
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rally
Traxxas Slash
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Spartan
Traxxas Summit
Traxxas TRX-4
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XO-1
This is the Common Sense Lectron Pro 3S 50C LiPo Battery with 5200mAh capacity. Designed for guys who want to push their brushless 1/10 scale vehicles to the limit, this 3S battery lets you take full advantage of your power system. Features a huge capacity for extended runtimes, and a 50C rating for lots of power. Competitively priced, this lipo is a great combination of features and value.
Specifications:Application(s): 1/10 scale cars, trucks, and buggiesDischarge Connector: XT60Balance Connector: JST-XHLength: 133mm (5.24 in.)Width: 42mm (1.65 in.)Height: 27mm (1.06 in.)Weight: 350g (12.35 oz)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas 3S, 11.1V, 5000mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors.
High-Current ConnectorRevolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
Charging with a Traxxas iD ChargerThe Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:Type: LiPoTotal Capacity: 5000Voltage: 11.1Continuous Discharge: 25C (125A)Max Burst Rate: 50C (250A)Watt Hours: 55.5Charge Rate: 1C (5A)Max Charge Rate: 2C (10A)Dimensions: 155x26x44mmWeight: 13.3oz (376g)
CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.
COMPATIBILITY:
Traxxas 4-Tec 2.0
Traxxas E-Maxx
Traxxas E-Revo
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rally
Traxxas Slash
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Spartan
Traxxas TRX-4
Traxxas Unlimited Desert Racer
Traxxas X-Maxx
Traxxas XO-1