The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24™ series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When it’s time for a break at work, set up an obstacle course with items on your desk for the SCX24™ Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If you’d rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon you’ll have a challenging trail for fresh air adventuring. Your truck’s water-resistant electronics save you from having to worry about wet track conditions when you crawl. With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. It’s designed to keep right on running through rough trails and tough climbs. The SCX24™ 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included.
Axial® AS-1 servo with servo saver
Dynamite® 7.4V 350mAh 30C LiPo battery
Dynamite® 180-size, 88T Brushed Electric Motor
Realistic 1967 Chevrolet C10 Truck body
Two bright LEDs in front bumper for night driving
True, full-time 4-wheel drive
3-Link front and 4-link rear suspension for optimal handling
Worm drive gears for front and rear axles that add ground clearance
Realistic steel frame rails for added strength
Hinged body system for easy access to on-board components
Full ball bearing drivetrain
Licensed wheels modeled after 1:1 Method Wheels
Licensed tires modeled after 1:1 BF Goodrich Tires
The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24™ series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When it’s time for a break at work, set up an obstacle course with items on your desk for the SCX24™ Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If you’d rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon you’ll have a challenging trail for fresh air adventuring. Your truck’s water-resistant electronics save you from having to worry about wet track conditions when you crawl.
With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. It’s designed to keep right on running through rough trails and tough climbs. The SCX24™ 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included.
Axial® AS-1 servo with servo saver
Dynamite® 7.4V 350mAh 30C LiPo battery
Dynamite® 180-size, 88T Brushed Electric Motor
Realistic 1967 Chevrolet C10 Truck body
Two bright LEDs in front bumper for night driving
True, full-time 4-wheel drive
3-Link front and 4-link rear suspension for optimal handling
Worm drive gears for front and rear axles that add ground clearance
Realistic steel frame rails for added strength
Hinged body system for easy access to on-board components
Full ball bearing drivetrain
Licensed wheels modeled after 1:1 Method Wheels
Licensed tires modeled after 1:1 BF Goodrich Tires
Axial SCX24 2021 Ford Bronco - Hard Body 1/24 Scale Mini Scale Crawler!
The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires.
The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!
Axial SCX24 Ford Bronco
Features:
Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included
Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire
Bonus second decal sheet for optional customization
Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels
Working lights in front, with molded lenses on all four corners of the body
True full-time 4-wheel drive
Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance
Worm drive gears in front and rear differentials increase ground clearance
Sturdy steel C-channel frame rails with bracing for added strength and proper alignment
Durable steel axles provide strength and durability to match tough climbs and rough trails
2-Year limited warranty (see product manual for details)
Specifications:
Height: 4.625" (117 mm)
Front Track: 3.938 in (100.0mm)
Width: 3.875" (98 mm)
Rear Track: 3.938 in (100.0mm)
Wheelbase: 5.19" (132 mm)
Length: 8.75" (222 mm)
Includes:
(1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR
(1) Horizon Hobby® 2.4GHz 3-Channel Radio System
(1) Axial® AS-1 Micro Servo
(1) Horizon Hobby® ESC/Receiver Combo
(1) Dynamite® USB LiPo Charger
(1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion
(1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Everything you need to drive is included
The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail.
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Needed to Complete
Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
Specifications
Color Variant: RED
The SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler, is a longer wheelbase SCX24 that is ready to hit the trail or the desk. The included Jeep JT Gladiator body depicts a scale interior, driver and detailed Tuff Stuff Overland scale accessories. Based on the proven SCX24 chassis, your everyday life has just become an excellent course. Unfolded laundry? More like a mountain for your truck to get up. Bored at work? Crawl on your desk, we won't tell HR. Out on a hike? Take this with you for an action packed day. With water-resistant electronics and performance driven design, this truck is ready to go the distance and perform like a champ.
For extreme crawling performance, this mini crawler has been extended 22mm to increase stability and allow a more scale fitment of the body. The axles use steel front and rear axles, steel stub axles and steel dogbones to give you peace of mind while tackling any obstacle. An 88T motor and 2S LiPo battery are used to provide precise, dependable control. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler M/T tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep JT Gladiator comes ready-to-run with radio and electronics included.
Axial SCX24 Jeep JT Gladiator 4WD RTR
Features:
Factory-assembled and ready-to-run
Detailed Jeep Gladiator body with scale interior, scale driver and Tuff Stuff Overland scale accessory pack
Two LED lights in front bumper
Officially licensed Nitto Trail Grappler M/T tires mounted on officially licensed KMC XD Machete wheels
True full-time 4-wheel drive
22mm longer wheelbase for best body fitment
Durable 3-link front/4-link rear suspension for optimal crawling performance
Worm drive front and rear differential gears for increased ground clearance
Sturdy steel C-channel frame rails with bracing for added strength and proper alignment
Durable steel axles provide strength and durability to match tough climbs and rough trails
Hook-and-loop body hinge for easy, tilt-open battery access
Specifications:
Scale: 1/24
Drive: 4WD
Motor Type: Brushed
Vehicle Type: Rock Crawler
Includes:
(1) Axial SCX24 Jeep Gladiator 1/24 Scale 4WD RTR with:
(1) Horizon 2.4GHz 2-Channel Radio System
(1) Axial AS-1 Servo
(1) Horizon ESC/Receiver Combo
(1) Dynamite 88T Brushed Electric Motor
(1) Dynamite 350mAh 2S LiPo 7.4V
(1) USB Charger
(4) AA Batteries for Transmitter
Needed to Complete:
Nothing! This truck is ready to go out of the box.
The SCX24 Deadbolt 4WD is the first Axial off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on outdoor OR indoor adventures - offering factory-assembled ease, scale looks, and confident handling on any trail.
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Needed to Complete
Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ II platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
Specifications
Color Variant: Green
Axial SCX24 40s Power Waggon - Hard Body 1/24 Scale Mini Scale Crawler!
The Axial & SCX24 Power Wagon comes out of the box fully assembled and ready-to-run. The SCX24 Power Wagon features an exceptionally detailed and extra-durable ABS hard body with an overlanding rack and accessories, included for optional installation, to add to the scale realism. it looks ready to take on all the wilderness excursions! This authentic scale body is available in two color options based on classic Dodge colors. Serious scale modelers will find that this Power Waggon not only looks the part but performs just as good as it looks while bringing next level realism to the SCX24 platform. Completing this monstrous trail killer are a sticky set of Pro-Line Interco Super Swamper tires mounted on a mean set of matte black Pro-Line Impulse Bead-Loc wheels.
The SCX24 Dodge Power Waggon is built on the proven and easy-to-drive SCX24 chassis. The SCX24 makes it easy to find RC adventures everywhere. Go crawling on your desk, Turn a messy room into an obstacle course, Build an indoor crawling course on the kitchen table, or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link wishbone front with 4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles, and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and Spektrum 2S LiPo battery, while a Spektrum SLT2 2.4GHz radio system is included for precise, dependable control. Adventure is out there! just waiting to be explored!
Axial® SCX24™ Dodge Power Wagon
Features:
Factory-assembled and ready-to-run, with Spektrum SLT2 radio, 180 brushed motor, servo, ESC/receiver unit, and "AA" transmitter batteries included
Pro-Line Interco Super Swamper tires mounted on Pro-Line Impulse Bead-Loc wheels
Working head lights and tail lights, with molded lenses
True full-time 4-wheel drive
Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance
Worm drive gears in front and rear differentials increase ground clearance
Sturdy steel C-channel frame rails with bracing for added strength and proper alignment
Durable steel axles provide strength and durability to match tough climbs and rough trails
2-Year limited warranty (see product manual for details)
Specifications:
Scale: 1/24
Length: 9.65" (245mm)
Width: 4.1" (104.1mm)
Height: 4.2" (107mm)
Wheelbase: 6.1" (155mm)
Weight: 11.5oz (325.5g)
Includes:
(1) Axial® SCX24™ 40's 4 Door Dodge Power Wagon 1/24 Scale 4WD RTR
(1) Spektrum SLT2 2.4GHz Transmitter
(1) Axial® AS-1 Micro Servo
(1) Spektrum 2 in 1 10Amp ESC/Receiver
(1) Spektrum USB LiPo Charger
(1) Dynamite 88T 180-Size Brushed Electric Motor With Pinion
(1) Spektrum 350mAh 2S 30C 7.4V LiPo Battery
(4) AA Batteries for Transmitter
(2) Decal Sheets
(1) Product Manual
Needed to Complete:
Everything you need to drive is included
Axial 1/6 SCX6 Jeep JLU Wrangler - Large Scale Crawling Adventure!
The Axial SCX6 Jeep JLU Wrangler is a 1/6 scale, ready to run BIG rig that tips the scales at over 25 pounds! Jeep fans, crawlers and large scale enthusiasts now have another option for adventure. The amount of realistic detail and high-performance functionality in 1/6 scale size can only found here.
The SCX6 Jeep JLU Wrangler 4WD takes "scaling" to the next level. Based on the proven SCX10 III, the SCX6 chassis is like a big brother. The 1/6 size AR90 axles offer durability and performance, while a three-link Panhard front and four-link rear suspension setup keeps things stable in extreme conditions. The transmission offers high and low gears out of the box, with an included Spektrum S614 Metal-Gear Servo installed for the two-speed linkage.The 1/6 scale size allows incredible detail, and still fits conveniently into the trunk of your car. Rock gardens and hiking trails provide plenty of challenges to conquer as you navigate, and the Jeep JLU Wrangler accurately recreates the look of the full-size model. Even the most discriminating Jeep enthusiasts will appreciate the accuracy of the details found throughout. When the sun goes down, included LED headlights and taillights add even more realism. Huge 7" tall BFGoodrich KM3 tires provide excellent grip and ground clearance in off-road terrain. They're mounted on licensed injection-molded Black Rhino Primm 3-piece beadlock wheels, making it easy to swap tires without glue.
With the included Spektrum DX3 radio, you get incredible range, response, and the interference resistant benefits of DSMR technology. Combined with the Spektrum Firma Crawler 120A Smart Sensored-Brushless ESC, the SCX6 is ready to deliver the advantages of Spektrum Smart telemetry technology. Install a Spektrum Smart LiPo battery and you can view battery capacity on the transmitter's voltage level indicator. Outfit the DX3 with the optional BT2000 Bluetooth module (not includedd), download the free Spektrum Dashboard app to your smart device, and you're ready to use more Smart real-time telemetry — without adding on-board sensors or modules. Just add your choice of suitable iC5 equipped battery and take your adventure to an exciting new level.
Features:
The first ever Axial® 1/6 scale chassis design based on the proven SCX10™ III
Includes AR90 "Standard" axles with a Heavy-Duty Spool
Metal gear transmission comes configured for two speeds with high and low gears
Durable three-link front and four-link rear suspension setup provides optimal handling
Replica V8 engine cover adds to the realistic appearance
Spektrum™ DX3™ 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology
Spektrum™ Firma™ Crawler 120A ESC feeds telemetry data to the DX3™ transmitter in real time
Includes a powerful Spektrum™ S905 Large Scale Metal Gear steering servo (also accepts larger 1/5 scale servos with the included adapter)
Detailed Jeep® JLU Wrangler body with LED headlights and taillights provides exceptional scale looks
High-traction, 7" tall BFGoodrich® KM3 tires are mounted on Black Rhino Primm 3-piece beadlock wheels
Battery trays adjust to fit a wide range of battery sizes
2-Year limited warranty (see product manual for details)
Specifications:
Front Track: 14.88 in (378 mm)
Ground Clearance: 4.25 in (107.9 mm)
Internal Gear Ratio: 23.73:1 / 7.20:1
Product Height: 14.55" (370 mm)
Product Length: 33.55" (852 mm)
Product Weight: 25 lb (11.3 kg)
Product Width: 14.88" (378 mm)
Rear Track: 14.88 in (378 mm)
Wheelbase: 19.74" (501 mm)
Wheel Width: 2.05 in (52 mm)
Includes:
(1) Axial® SCX6™ Jeep® JLU Wrangler 1/6 Scale 4WD RTR
(1) Spektrum™ DX3™ Smart Transmitter with Thumb Steer
(1) Spektrum™ 5-Channel DSMR® Sport Receiver
(1) Spektrum™ 1/6 40kg Waterproof Digital Servo
(1) Spektrum™ 15kg Servo for 2-speed Shifting
(1) Spektrum™ Firma™ Crawler 120A Sensored Brushless Smart ESC
(1) Spektrum™ Firma™ 1200Kv Sensored Brushless Motor
(1) Servo Adapter for Large Scale Servos
Needed to Complete:
(1) 2S-3S Standard or “Shorty” LiPo Battery
(1) Compatible Battery Charger
Axial SCX10 Pro 4WD Scaler Kit - "Comp-Ready" Performance!
This is the Axial SCX10 Pro 1/10 4WD Scaler Rock Crawler Kit. Designed to offer top level performance this comp-ready kit from Axial is a must have. The SCX10 Pro incorporates common competition upgrades making it one of the most capable scale kits on the market. Built to handle tough terrain you can utilize this kit for hardcore rock crawling or even use it as an incredible base for your next scale build. The SCX10 Pro uses a light weight flat plate chassis design for optimized climbing performance. Incorporated are multiple shock mounting locations to fine tune your suspension. Smooth body aluminum shocks control the suspension using a unique spring setup. By eliminating the shock spring and collar from outside of the shock body, the aluminum smooth body, oil-filled shocks provide higher clearance when taking advantage of the SCX10 Pro's increased steering angle. The shocks' eye-to-eye length is 96mm and uses 12mm diameter springs. The dual O-ring lower shock cap acts as the upper spring retainer, while the lower shock cup features a built-in bump stop that can be trimmed for fine-tuning your suspension.Locating the axles are a set of durable metal links using a proven four link design on the rear and utilizing high clearance links to keep you from getting hung up on obstacles. Locating the front axle is a solid three link design with a panhard link securely mounted to the chassis with a durable metal mounting bracket. The axles use an updated multi-piece design with steel tubes that can accommodate an axle-mounted servo (AMS) or a chassis-mounted servo (CMS) to increase the scale looks.Driving this formattable drivetrain is an innovative clean sheet design transmission. The transmission allows you to underdrive the rear axle by 40% manually or with a servo for a distinct advantage on the rocks. This under driving of the rear axle allows for a tighter turning radius and reduces "torque twist" on climbs. Aiding in turning performance is the added forward weight bias of the front mounted motor. The motor mount positions your choice of motor low and forward in the chassis for superior weight distribution, providing the balance needed to keep from flipping while you tackle tough lines.Overall the SCX10 Pro has been built to showcase the incredible crawling performance Axial products are known for. Using competition inspired components and high quality, durable materials this kit offers a distinct advantage over the competition. Whether your looking to go mild or wild on your next build, the SCX10 Pro gives you the advantage your looking for.NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Axial® SCX10™ Pro 4WD Kit
Features:
The easiest, most convenient way to build a scale crawler for competition, with numerous innovations never before offered in a single comp-ready kit.
Pro kit saves significant time and money compared to buying components separately.
Comp-ready chassis is lighter, lower, and more adjustable, optimizing performance for climbing, side hilling, and break over.
Multi-piece steel tube axles can accommodate a servo on the axle (AMS) or chassis-mounted (CMS).
Low and forward motor position provides superior weight distribution and improves balance.
Underdrive the rear axle via servo or manually lock the rear axle in 1:1 or underdrive.
New aluminum smooth body, oil-filled shocks provide higher clearance.
The Pro has already won and placed at multiple events with designer Wyatt Mellon at the wheel.
Specifications:
Height: 7" (178mm)
Width: 9.25" (235mm)
Length: 16.65" (423mm)
Weight: 3lbs (1.4kg) Without ComponentsWheelbase: 12.5" (318mm)Ground Clearance: 2.25" (57.1mm)
Gear Pitch: 32-PitchPinion: 13T
Internal Gear Ratio: 10.26:1, 15.33:1Final Drive Ratio: 38.46:1, 57.50:1
Motor Size: 540/550 recommended
Steering Type: 2WS
Shock Type: 2.9" - 3.8" (74-96mm) Aluminum Oil filledSuspension: 3-Link/4-Link
Ball Bearings: Complete Vehicle
Chassis: Aluminum Plate
Scale: 1/10Completion Level: Kit
Drivetrain: 4WD
Wheel Hex Size: 12mmApproximate Assembly Time: 5-7 Hours
Includes:
(1) SCX10 Pro Rock Crawler Kit
(1) Product Instruction Manual
Needed to Complete:
(1) 2-4 Channel Surface Transmitter & Receiver
(1) 540/550 Rock Crawler Motor
(1) Electronic Speed Control
(1) Steering Servo
(1) Body for SCX10 Pro Chassis
(4) Wheels with 12mm Hex
(4) Tires to Fit Wheels
(1) Micro servo for optional use of shift-able underdrive