Axial 48 Pitch, Steel Pinion Gear. This gear is compatible with the Axial XR10, AX10, SCX10 and Wraith trucks equipped with 48 pitch gears, and is available in a variety of tooth count options. Package includes pinion gear and two set screws.Features:
Fits 3.15mm (0.125") Standard 540 Motor shafts
Includes extra set screws
COMPATIBILITY:
Axial AX10Axial CapraAxial SCX10 IAxial Wraith 2.2Axial XR10
Axial SMT10 Flat Band Spring Servo Saver Assembly. Package includes replacement servo saver components.
Features:
Servo saver set
Compatible with SMT10
Molded plastic parts
Includes mounts for 23t, 24t, and 25t servo splines
Improved design for increased steering accuracy while providing servo gear protection
Genuine Axial Part
COMPATIBILITY:
Axial SMT10
SSD M3 Long Plastic Rod Ends are injection molded, with a factory installed "Axial Width" steel pivot ball. These are replacements for the SSD Axial Titanium links, and are a must have item for your trail bag. Package includes ten long rod ends.
Features:
M3 Long Plastic Rod Ends
Injection molded black plastic rod end
Steel ball
No slop
Axial width ball
Replacement for SSD00021, SSD00048
Specifications:Eye to Eye Length: 19mmShaft Diameter: 6mmBall Width: 7.45mmBall Inside Diameter: 3mmIncludes:
(10) M3 Long Plastic Rod Ends
COMPATIBILITY:
Axial RR10 Bomber 1.0
Axial RR10 Bomber 2.0
Axial SCX10 I
Axial SCX10 II
Axial Wraith 2.2
Axial Yeti 1/10
Axial Yeti SCORE
SSD Trail King
Axial SCX10 Pro 4WD Scaler Kit - "Comp-Ready" Performance!
This is the Axial SCX10 Pro 1/10 4WD Scaler Rock Crawler Kit. Designed to offer top level performance this comp-ready kit from Axial is a must have. The SCX10 Pro incorporates common competition upgrades making it one of the most capable scale kits on the market. Built to handle tough terrain you can utilize this kit for hardcore rock crawling or even use it as an incredible base for your next scale build. The SCX10 Pro uses a light weight flat plate chassis design for optimized climbing performance. Incorporated are multiple shock mounting locations to fine tune your suspension. Smooth body aluminum shocks control the suspension using a unique spring setup. By eliminating the shock spring and collar from outside of the shock body, the aluminum smooth body, oil-filled shocks provide higher clearance when taking advantage of the SCX10 Pro's increased steering angle. The shocks' eye-to-eye length is 96mm and uses 12mm diameter springs. The dual O-ring lower shock cap acts as the upper spring retainer, while the lower shock cup features a built-in bump stop that can be trimmed for fine-tuning your suspension.Locating the axles are a set of durable metal links using a proven four link design on the rear and utilizing high clearance links to keep you from getting hung up on obstacles. Locating the front axle is a solid three link design with a panhard link securely mounted to the chassis with a durable metal mounting bracket. The axles use an updated multi-piece design with steel tubes that can accommodate an axle-mounted servo (AMS) or a chassis-mounted servo (CMS) to increase the scale looks.Driving this formattable drivetrain is an innovative clean sheet design transmission. The transmission allows you to underdrive the rear axle by 40% manually or with a servo for a distinct advantage on the rocks. This under driving of the rear axle allows for a tighter turning radius and reduces "torque twist" on climbs. Aiding in turning performance is the added forward weight bias of the front mounted motor. The motor mount positions your choice of motor low and forward in the chassis for superior weight distribution, providing the balance needed to keep from flipping while you tackle tough lines.Overall the SCX10 Pro has been built to showcase the incredible crawling performance Axial products are known for. Using competition inspired components and high quality, durable materials this kit offers a distinct advantage over the competition. Whether your looking to go mild or wild on your next build, the SCX10 Pro gives you the advantage your looking for.NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Axial® SCX10™ Pro 4WD Kit
Features:
The easiest, most convenient way to build a scale crawler for competition, with numerous innovations never before offered in a single comp-ready kit.
Pro kit saves significant time and money compared to buying components separately.
Comp-ready chassis is lighter, lower, and more adjustable, optimizing performance for climbing, side hilling, and break over.
Multi-piece steel tube axles can accommodate a servo on the axle (AMS) or chassis-mounted (CMS).
Low and forward motor position provides superior weight distribution and improves balance.
Underdrive the rear axle via servo or manually lock the rear axle in 1:1 or underdrive.
New aluminum smooth body, oil-filled shocks provide higher clearance.
The Pro has already won and placed at multiple events with designer Wyatt Mellon at the wheel.
Specifications:
Height: 7" (178mm)
Width: 9.25" (235mm)
Length: 16.65" (423mm)
Weight: 3lbs (1.4kg) Without ComponentsWheelbase: 12.5" (318mm)Ground Clearance: 2.25" (57.1mm)
Gear Pitch: 32-PitchPinion: 13T
Internal Gear Ratio: 10.26:1, 15.33:1Final Drive Ratio: 38.46:1, 57.50:1
Motor Size: 540/550 recommended
Steering Type: 2WS
Shock Type: 2.9" - 3.8" (74-96mm) Aluminum Oil filledSuspension: 3-Link/4-Link
Ball Bearings: Complete Vehicle
Chassis: Aluminum Plate
Scale: 1/10Completion Level: Kit
Drivetrain: 4WD
Wheel Hex Size: 12mmApproximate Assembly Time: 5-7 Hours
Includes:
(1) SCX10 Pro Rock Crawler Kit
(1) Product Instruction Manual
Needed to Complete:
(1) 2-4 Channel Surface Transmitter & Receiver
(1) 540/550 Rock Crawler Motor
(1) Electronic Speed Control
(1) Steering Servo
(1) Body for SCX10 Pro Chassis
(4) Wheels with 12mm Hex
(4) Tires to Fit Wheels
(1) Micro servo for optional use of shift-able underdrive
The Samix SCX10 II Brass Steering Knuckle, Hub Carrier & Brake Rotor Set combines Samix brass steering knuckles, hub carriers, scale brake rotors and calipers to add 140 grams of unsprung weight to your front axle, and save you a few bucks in the process! Package includes knuckles, brake rotors, bearings, knuckle bushings, c-hubs and hardware.
The Samix SCX10 II Brass Heavy Duty Steering Knuckle Set adds 92 grams of weight at the lowest point of the truck for a lower overall CG, and helps to improve the front/rear weight bias by adding 46 grams to the front corners of the truck for increased climbing stability. When you combine this with the bolt on scale brake rotor and caliper it bumps the weight to 52g ea, or 104g total! Plus the knuckles have been finished in a stealthy black paint job with gold chamfered edges for a custom look that is also competition legal!
The knuckle design uses a heavy duty 5x13x4mm outer bearing for increased durability with a tad more weight, and a machined POM bushing is used to make the bearing easy to install and remove. The high quality brass material is precision machined, etched with Samix branding and L/R marks for easy identification. These are a direct fit to any AR44 c-hub and provide improved performance with increased scale realism.
Samix SCX10 II Brass Hub Carriers are precision machined to fit your SCX10 II or AR44 axles. Weighing in at 35 grams for the pair, these c-hubs feature a clamp lock design and a black finish that you wont find on other brass parts. This upgrade offers the increased performance of a metal c-hub, with the improved stability that comes with increased unsprung weight, while remaining stealthy and unnoticed.
COMPATIBILITY:
Axial SCX10 II
The Samix SCX10 II Brass Hub Carrier Set is a precision machined c-hub option for your SCX10 II or AR44 axle build. Weighing in at 35 grams for the pair, these c-hubs feature a clamp lock design and a black finish that you wont find on other brass parts. This upgrade offers the increased performance of a metal c-hub, with the improved stability that comes with increased unsprung weight, while remaining stealthy and unnoticed. Package includes two c-hubs.
COMPATIBILITY:
Axial SCX10 II
Axial SCX10 III Base Camp Transmission Center Output Shaft. Package includes replacement output shaft used with the AXI232068 output gear.
COMPATIBILITY:
Axial SCX10 III
SSD Double Bent Titanium Steering/Panhard Links are a must have upgrade for your SCX10 II, as well as gen 1 SCX10 trucks that are equipped with the SSD CMS kit. The bent link geometry will help to provide additional clearance at the axle housing.Features:
Double bent titanium links
Internal M3 thread
Give more clearance over D60 axle and SCX10 frame
Direct fit on SSD SCX10 CMS kits (SSD00026, SSD00120)
Direct fit on SCX10 II
Stronger than aluminum
Lighter than steel
Specifications:Diameter: 5.0mmLength (eye to eye):Short Rod Ends (SCX10): 89mmOne Short and One Long Rod End (SCX10 II): 93.5mmIncludes:
(2) Bent titanium links
(4) Short plastic rod ends (SSD00020)
(2) Long plastic rod ends (SSD00017)
(4) M3 x 12mm thread rod
COMPATIBILITY:
Axial SCX10 I
Axial SCX10 II
SSD Trail King
Team FastEddy Axial SCX10 II V2 Bearing Kit. This kit is compatible with the SCX10 II Kit and RTR models. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again.
Includes:
(6) 5X10X4
(12) 5x11x4
(2) 10x15x4
(4) 7x14x3.5 Open
(2) 5x14x5
(2) 8X16X5
NOTE:
Photo of unpackaged bearings shows random bearings and is not representative of what you will receive.
In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us.
COMPATIBILITY:
Axial SCX10 II
Axial SCX10 III Shock Towers & Panhard Mount Set. This is the replacement front and rear shock hoop set for the Axial SCX10 III. Package includes front and rear shock hoops, and two panhard mount brackets.
COMPATIBILITY:
Axial SCX10 III
