FOLLOW "BOSSMAN42" ON KICK.COM & GET ENTERED TO WIN A MINI-Z READY SET!

Mini Z Parts

85 products

  • PN Racing Mini-Z KS Compound Tire Series PN Racing Mini-Z KS Compound Tire Series

    PN Racing Mini-Z KS Compound Tire Series

    This is brand new develop Mini-Z tire call KS Compound, much more grip and long life. All new KS Compound tire with PNR and KS logo at the sidewall. All new KS Compound Series KS1030 Slick Front Tire SUPER SOFT KS1034 Slick Front Tire SOFT KS1038 Slick Front Tire MEDIUM KS1042 Slick Front Tire FIRM KS2020 Slick Rear Tire SUPER SOFT KS2024 Slick Rear Tire SOFT KS2028 Slick Rear Tire MEDIUM KS2820 Radial Rear Tire SUPER SOFT KS2824 Radial Rear Tire SOFT KS2828 Radial Rear Tire MEDIUM KS4820 14mm Radial Rear Tire SUPER SOFT KS4824 14mm Radial Rear Tire SOFT KS4828 14mm Radial Rear Tire MEDIUM

  • PN RACING Mini-Z 2WD Machine Cut BBS Wheel (SEVERAL OPTIONS) PN RACING Mini-Z 2WD Machine Cut BBS Wheel (SEVERAL OPTIONS)

    PN RACING Mini-Z 2WD Machine Cut BBS Wheel (SEVERAL OPTIONS)

    New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

  • Last stock! PN Racing Mini-Z KS Compound RCP Low Profile Slick 8.5mm Tire Medium (2pc)

    PN Racing Mini-Z KS Compound RCP Low Profile Slick 8.5mm Tire Medium (2pc)

    1 in stock

    Brand New Low Profile Tires   PN Racing KS & KS-M compounds are our most popular race proven tire compounds PN Racing KS Compound:  its known to offer more grip as the tire heat up and long duration. PN Racing KS-M Compound: its known to offer quick warm up and good grip from beginning of the race, also suitable for tracks in cold climate. After months of R&D, we can finally release our brand new low profile high performance tires.  Our new low profile tires are 1.6mm thick, when its installed on the 20mm rims, the diameter will be 23.2mm. For stock class you don't have to true these tires, it will be broken in after running on RCP track for one battery pack. For more advanced classes, only the surface (0.1-0.2mm) needs to be trued.   8.5mm tires KS Compound KS1130 Slick Front Tire (8.5mm) SUPER SOFT KS1134 Slick Front Tire (8.5mm) SOFT KS1138 Slick Front Tire (8.5mm) MEDIUM KS1142 Slick Front Tire (8.5mm) Hard

    1 in stock

    $6.99

  • PN Racing Mini-Z V2 Strong Tire Tape

    6 in stock

    $7.99 - $9.59

  • Last stock! Marka V1 Mini-Z F1 RCP Rubber Rear Tire 5 degree Soft

    Marka V1 Mini-Z F1 RCP Rubber Rear Tire 5 degree Soft

    1 in stock

    Marka Racing tires were entirely designed, developed and manufactured in Italy and tested by the high level drivers around the world.  Marka Racing tires for Mini-Z are designed to offer the maximum performance on the RCP / Kyosho tracks and can also be used on other surfaces.Marka Racing tires have a lower degraded performance than other tires on the market today, ensuring stable performance in each round.

    1 in stock

    $7.99

  • Marka V1 Mini-Z RCP Rubber Rear Tire 10 degree (1 Pair) Marka V1 Mini-Z RCP Rubber Rear Tire 10 degree (1 Pair)

    6 in stock

    $8.99

  • PN Racing Mini-Z Jomurema GT01 Carbon Fiber Adapter

    PN Racing Mini-Z Jomurema GT01 Carbon Fiber Adapter

    3 in stock

    CP950  Mini-Z Jomurema GT01 Carbon Fiber AdapterJomurema GT01 Body Made from high strength carbon fiber to reduce weight and adds durability. The body height is adjustable using the shims provided in the kit. Additional shims can be used to increase the body height. Requirement: PN Interchangable body mount (BM001) Jomurema GT01 Body Color: Carbon fiber black. Material: Body mount: Carbon fiber Spacer : Fiber Glass Shims : PC Includes: 1 x Carbon Fiber Body Mount 3 x 0.5mm Fiber Glass Spacer 1 x 2.0mm Fiber Glass Spacer

    3 in stock

    $8.99

  • Last stock! PN Racing Mini-Z KS-M Compound RCP Low Profile Slick 8.5mm Tire (2pc)

    PN Racing Mini-Z KS-M Compound RCP Low Profile Slick 8.5mm Tire (2pc)

    2 in stock

    KSM530 Slick Front Tire (8.5mm) SUPER SOFT KSM534 Slick Front Tire (8.5mm) SOFT KSM538 Slick Front Tire (8.5mm) MEDIUM KSM542 Slick Front Tire (8.5mm) Hard

    2 in stock

    $6.99

  • PN Racing Mini-Z 2WD Machine Cut 10 Spoke Front Wheel Black (F0, F1, F2)

    PN Racing Mini-Z 2WD Machine Cut 10 Spoke Front Wheel Black (F0, F1, F2)

    11 in stock

    210BF0:Mini-Z 2WD Machine Cut 10 Spoke Front Wheel F0, F1, OR F2 Black New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

    11 in stock

    $4.99

  • PN Racing Mini-Z PNWC 70 Turn Ball Bearing Motor

    PN Racing Mini-Z PNWC 70 Turn Ball Bearing Motor

    3 in stock

      *MR03 SPORT support this motor with gear ratio not lower than 4.75* New Version with BALL BEARING New 2010 Motors Series from 32T to 80T Spec - New Brushes and Brushes Holder, timing setting- Balanced armature- New endbell design for increased cooling- Bottom case air cool scoop intake- JAPAN Ball Bearing

    3 in stock

    $14.99

  • PN RACING Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R0, R1, R2, R3 R14MM Black PN RACING Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R0, R1, R2, R3 R14MM Black

    PN RACING Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R0, R1, R2, R3 R14MM Black

    16 in stock

    Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R0 Black New design Mini-Z 2WD Wheel with 2pcs in pack. Machine CutMaterial Special ABS plastic.

    16 in stock

    $4.99

  • Limitless Mini-z Battery Removal Tool Limitless Mini-z Battery Removal Tool

    Limitless Mini-z Battery Removal Tool

    This is a simple way to get your aaa batteries out of your Kyosho mini-z cars

    $0.00 - $7.99

  • Last stock! PN Racing Mini-Z MR02/03 Dual Spring Center Shock Set

    PN Racing Mini-Z MR02/03 Dual Spring Center Shock Set

    1 in stock

    Center spring helps to off load weight of car from T-plate. T-plate can stay flat with no curvature. This gives the T-plate maximum freedom to twist for consistent roll control and better traction. Thru-shaft design maximize length of cylinder for smooth operation. Extra cylinder surface area increase effectiveness of damping oil or grease when used. Thru-shaft arrangement also results in constant amount of overlap between shaft and cylinder for consistent damping thru out travel. Adjustable coil over shock spring Adjustable negative spring. Addition of negative spring controls the shock during bottoming. It dampens rebound for better axel control, and minimize momentary traction loss when going over large bumps. Negative spring interchangeable with MR02 front springs. Therefore wide range of springs can be used for tuning. Optional Spring set MR2162 buy separate.

    1 in stock

    $10.99

  • Last stock! Marka V1 Mini-Z RCP Rubber Rear Radial Tire 5 degree Very Soft (1 Pair)

    Marka V1 Mini-Z RCP Rubber Rear Radial Tire 5 degree Very Soft (1 Pair)

    1 in stock

    Marka Racing tires were entirely designed, developed and manufactured in Italy and tested by the high level drivers around the world.  Marka Racing tires for Mini-Z are designed to offer the maximum performance on the RCP / Kyosho tracks and can also be used on other surfaces. Marka Racing tires have a lower degraded performance than other tires on the market today, ensuring stable performance in each round. The compound of the material garantees the homogenity between different batches produced at different times. They are produced entirely in rubber, free of silicone, urethane, and ethyl carbamate.   The material does not Contain dangerous components According with the Following Regulations:   - Council Directive 76/769 / EEC of 27 July 1976 - Council Directive 67/548 / EEC of 27 June 1967 including the Commission Directive 2001/59 / EEC of 6 August 2001. - Directive of the European Parliament and of the Council 1999/45 / EEC of 31 May 1999 and Subsequent modifications

    1 in stock

    $7.99

  • Marka V4 Mini-Z RCP Rubber Front Tire 25 degree Medium (1 Pair)

    Marka V4 Mini-Z RCP Rubber Front Tire 25 degree Medium (1 Pair)

    4 in stock

    Marka V4 Mini-Z RCP Rubber Front Tire 25 degree Medium (1 Pair)

    4 in stock

    $7.99

  • PN Racing Mini-Z MR03 Front Suspension Spring Set (5 Pairs)

    PN Racing Mini-Z MR03 Front Suspension Spring Set (5 Pairs)

    6 in stock

    Comes with 2 pairs srpingOrange = 32g/mmBlue = 41g/mmMR3010 SetRed = 70g/mmGreen = 104g/mmPurple = 139g/mmWhite 189g/mmYellow = 270g/mm

    6 in stock

    $6.99

  • PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R14mm PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R14mm

    PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R14mm

    17 in stock

    PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R14mm New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

    17 in stock

    $4.99

  • Last stock! Kyosho Mini-Z Tire Case (2pcs)

    Kyosho Mini-Z Tire Case (2pcs)

    1 in stock

    MINI-Z Tire Case (2pcs) Specially designed cases for organizing tires and wheels of the MINI-Z. 2pcs. Included decals allows easy identification of the tire hardness.

    1 in stock

    $8.99

  • Last stock! PN Racing Mini-Z V4 MR03/PNR2.5W Double A-Arm Front Suspension PN Racing Mini-Z V4 MR03/PNR2.5W Double A-Arm Front Suspension

    PN Racing Mini-Z V4 MR03/PNR2.5W Double A-Arm Front Suspension

    2 in stock

    FEATURES:•Unequal length A-Arm suspension for MR-03 chassis.–Modeled after full-scale performance car suspension for realism.–Double A-Arm suspension gives good control of suspension geometry and roll center during travel.–Camber change with suspension compression during cornering keeps wheels near vertical for maximum tire contact with the road. Allows for precise cornering and maximum road holding.•Direct suspension swap–Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)–Ride height remains the same as stock.–0.5mm wider front steering geometry for less offset and faster steering. Overall width still remains the same to fit Auto Scale bodies.•No bump steer throughout suspension travel.•Suspension movement use ball joints instead of sliding knuckles. Eliminates constriction associated with sliding pin especially with high offset wheels.–Low constriction results in consistent cornering.•Machined aluminum ball socket instead of snap-fit. Joints will not pop out even during a hard collision.•Adjustable camber from 0-3° degrees with 1.3°/mm of camber gain.•Adjustable caster from 0-1.8° degrees•4 positions adjustable upper A-Arm pivot–Changes camber gain, static camber and roll center–Quick adjustment with set screw•Includes 3 tie-rods: 0° , +.5° and +1°•Quick down stop adjustment with the turn of a nut•Benefits of the sophisticated suspension system are precise cornering and maximum road holding which adds to mini-z driving pleasure ADJUSTMENT SPEC:Droop AdjustmentCaster AdjustmentCamber Gain and Camber AdjustmentTie Rod Adjustment COMES WITH:1 x Upper Bracket (#MR3062)1 x Lower Carbon Plate Cover (MR3070C)2 x Upper Arm2 x Lower Arm4 x Delrin Balls for Upper Arm and Lower Arm (#MR3080D)2 x Spring Guide Pin (#MR2507)2 x Spring Holder (#MR2056F)1 x Full Option Spring Set (#MR2501C)2 x Knuckle2 x Knuckle Shaft 3mm (#MR3080A3)2 x Knuckle Tie Rod Pin2 x Eccentric Shaft Adjuster (#MR2506)2 x Lower Arm Pin (#MR2509)4 x M2-3mm Set Screw (#MR2510S)1 x 0 Deg Tie Rod (#MR3050G)1 x +0.5 Tie Rod (#MR3050H)1 x +1.0 Tie Rod (#MR3050J)4 x M2-0.2mm Shims (#700501)2 x M3-0.2mm Shims (#700502)2 x M2x3 Countersunk Hex Screw (#709903)2 x M2x4 Countersunk Hex Screw (#709904)4 x M2x6 Countersunk Hex Screw (#709906)4 x M2x6 UFO Head Hex Screw (#708806)2 x M2x10 Countersunk Hex Screw (#709910)REQUIRED PARTS4 x Ball Bearing 3x6x2mm #600126OPTIONAL PARTSMR3080A2MR2506FMR2506FSMR2506FLMR3050TMR3050Q711906

    2 in stock

    $129.99

  • PN Racing Mini-Z 2WD Machine Cut 10 Spoke Front Wheel YELLOW (F0, F1, F2, F3)

    PN Racing Mini-Z 2WD Machine Cut 10 Spoke Front Wheel YELLOW (F0, F1, F2, F3)

    13 in stock

    210BF0:Mini-Z 2WD Machine Cut 10 Spoke Front Wheel F0, F1, OR F2 Black New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

    13 in stock

    $4.99

  • Limitless RC Mini Tool Holder scx24 mini-z 1/24 1/18 Scale Limitless RC Mini Tool Holder scx24 mini-z 1/24 1/18 Scale

    5 in stock

    $19.99

  • PN Racing Mini-Z KS Compound RCP Low Profile Slick 11mm Tire (2pc)

    PN Racing Mini-Z KS Compound RCP Low Profile Slick 11mm Tire (2pc)

    16 in stock

    KS Compound KS2130 Slick Tire (11mm) SUPER SOFT  KS2134 Slick Tire (11mm) SOFT  KS2138 Slick Tire (11mm) MEDIUM KS2142 Slick Tire (11mm) Hard

    16 in stock

    $7.99

  • PN Racing Mini-Z 2WD Machine Cut 5 Spoke Rear Wheel R14mm

    PN Racing Mini-Z 2WD Machine Cut 5 Spoke Rear Wheel R14mm

    3 in stock

    New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

    3 in stock

    $4.99

  • Last stock! R246 Mini-Z Steering Block for MR03 Camber 1

    R246 Mini-Z Steering Block for MR03 Camber 1

    1 in stock

    Kyosho R246-1311B Steering Block for MR-03 Camber 1

    1 in stock

    $27.99

  • PN Racing Mini-Z MR03 MM G10 Black Fiber Glass T-Plate

    PN Racing Mini-Z MR03 MM G10 Black Fiber Glass T-Plate

    3 in stock

    NEW BLACK VERSION G10 Fiber Glass T-Plate, slightly stiffer than white fiber glass. SOFT > 2 > 3 > 4 > 5 > HARD Number 2 Super SOFT Number 3 SOFT Number 4 Medium SOFT Number 5 MEDIUM Number 6 HARD

    3 in stock

    $4.50

  • N Racing Mini-Z V2 Lexan Roof JOMUREMA GT01

    N Racing Mini-Z V2 Lexan Roof JOMUREMA GT01

    14 in stock

    PN lexan roof have a thickness of 0.2mm. Molded from the original plastic window ensure perfect fitment. Lexan window is thinner and lighter compared to the original plastic part which reduced weight from the top of the car and shifts the center of gravity down for better stability. Requirement: JOMUREMA GT01 Body Color: Clear Material: Lexan Includes: 1 x lexan window uncut. 1 x Window mask

    14 in stock

    $9.99

  • PN Racing Mini-Z V2 Aluminum Front Body Mount Base PN Racing Mini-Z V2 Aluminum Front Body Mount Base

    PN Racing Mini-Z V2 Aluminum Front Body Mount Base

    17 in stock

    PN Racing Mini-Z V2 Aluminum Front Body Mount Base AVAILABLE IN 4 COLORS: BLACK, ORANGE, BLUE OR SILVER

    17 in stock

    $9.99

  • PN Racing Mini-Z KS-M Compound RCP Type-F Rear Tire (2pcs)

    PN Racing Mini-Z KS-M Compound RCP Type-F Rear Tire (2pcs)

    8 in stock

    PN Racing KS & KS-M compounds are our most popular race proven tire compounds PN Racing KS Compound:  its known to offer more grip as the tire heat up and long duration. PN Racing KS-M Compound: its known to offer quick warm up and good grip from beginning of the race, also suitable for tracks in cold climate. All new KS-M Compound Series (Comes in green colored bag) KSM130 Slick Front Tire SUPER SOFT KSM134 Slick Front Tire SOFT   KSM138 Slick Front Tire MEDIUM KSM220 Radial Rear Tire SUPER SOFT KSM224 Radial Rear Tire SOFT KSM230 Radial Rear Tire MEDIUM KSM234 Radial Rear Tire Firm KSM238 Radial Rear Tire Extra Firm KSM420 14mm Radial Rear Tire SUPER SOFT KSM424 14mm Radial Rear Tire SOFT KSM430 14mm Radial Rear Tire MEDIUM KSM320 Type-F Radial Rear Tire SUPER SOFT KSM324 Type-F Radial Rear Tire SOFT   KSM330 Type-F Radial Rear Tire MEDIUM KSM334 Type-F Radial Rear Tire FIRM   KSM338 Type-F Radial Rear Tire EXTRA FIRM

    8 in stock

    $5.99

  • Last stock! Kyosho MINI-Z PARTS BOX S 80465

    Kyosho MINI-Z PARTS BOX S 80465

    2 in stock

    Mini z parts container

    2 in stock

    $3.99

  • PN Racing Mini-Z 2WD Machine Cut 16 Spoke Rear Wheel R14mm PN Racing Mini-Z 2WD Machine Cut 16 Spoke Rear Wheel R14mm

    PN Racing Mini-Z 2WD Machine Cut 16 Spoke Rear Wheel R14mm

    4 in stock

    PN Racing Mini-Z 2WD Machine Cut 16 Spoke Rear Wheel R14mm New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

    4 in stock

    $4.99

  • Last stock! PN Racing Mini-Z AWD MA020 Alumium Tie Rod N+1 PN Racing Mini-Z AWD MA020 Alumium Tie Rod N+1

    PN Racing Mini-Z AWD MA020 Alumium Tie Rod N+1

    2 in stock

    PN RacingThe correct Toe for Kyosho Mini-Z AWD MA020 ONLY!MA0251 Wide -1, Toe OutMA0252 Wide 0MA0253 Wide +1, Toe InMA0254 Narrow -1, Toe OutMA0255 Narrow 0MA0256 Narrow +1, Toe In

    2 in stock

    $9.99

  • PN Racing Mini-Z MR02/03 93-102mm Multi Motor Mount PN Racing Mini-Z MR02/03 93-102mm Multi Motor Mount

    PN Racing Mini-Z MR02/03 93-102mm Multi Motor Mount

    3 in stock

    PN Racing Mini-Z MR02/03 93-102mm Multi Motor MountFeatures:-Compatible with MR015, MR02 and MR03-Wheelbase adjustable from 93mm to 102mm in 1mm increment. Include both 93-102mm standard width and optional parts MR2395D 98-102mm LM width Differential Carrier.-Wheelbase adjusted with only 2 screws.-Wheelbase adjustment does not affect gear mesh or suspension set-up. Allows quick testing of different wheelbase at the track.-Motor drops down for adjustment without affecting suspension set-up especially on a tri-damper set-up.-Multiple motor height positions possible for all track surfaces.-Four ride height adjustments with 2 eccentric bearing holders.-The ultimate motor mount. Results of years of improvement to Mini-Z motor mount designs.-Available in multiple colorsAttention: This motor mount only works with the motor with 2 screw holes

    3 in stock

    $63.99

  • PN Racing Mini-Z MR03 MM Carbon T-Plate

    PN Racing Mini-Z MR03 MM Carbon T-Plate

    5 in stock

    New MR03 Carbon T-Plate MM type. Number 2 Super SOFT Number 3 SOFT Number 4 Medium SOFT Number 5 MEDIUM Number 6 HARD

    5 in stock

    $5.99

  • Last stock! Kyosho Mini-Z MR-03 Chevrolet Corvette ZR1 Body w/Wheels (White)

    Kyosho Mini-Z MR-03 Chevrolet Corvette ZR1 Body w/Wheels (White)

    1 in stock

    MZN196 The Kyosho Mini-Z MR-03 Chevrolet Corvette ZR1 Body with Wheels is a detailed body option for the MR-03 platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift. Package includes one un-painted body, four wheels, one window insert and accessory parts trees to complete the body. NOTE: Body included will be white in color and not painted. Genuine Kyosho replacement parts make maintenance fast and easy!

    1 in stock

    $29.99

  • PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel Yellow (R0, R1, R2, R3)

    PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel Yellow (R0, R1, R2, R3)

    6 in stock

    New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

    6 in stock

    $4.99

  • PN Racing Mini-Z KS-M Compound RCP Low Profile Slick 11mm Tire (2pc)

    PN Racing Mini-Z KS-M Compound RCP Low Profile Slick 11mm Tire (2pc)

    12 in stock

      PN Racing KS & KS-M compounds are our most popular race proven tire compounds PN Racing KS Compound:  its known to offer more grip as the tire heat up and long duration. PN Racing KS-M Compound: its known to offer quick warm up and good grip from beginning of the race, also suitable for tracks in cold climate. After months of R&D, we can finally release our brand new low profile high performance tires.  Our new low profile tires are 1.6mm thick, when its installed on the 20mm rims, the diameter will be 23.2mm. For stock class you don't have to true these tires, it will be broken in after running on RCP track for one battery pack. For more advanced classes, only the surface (0.1-0.2mm) needs to be trued.   KS-M Compound KSM630 Slick Tire (11mm) SUPER SOFT KSM634 Slick Tire (11mm) SOFT KSM638 Slick Tire (11mm) MEDIUM KSM642 Slick Tire (11mm) Hard

    12 in stock

    $7.99

Login

Forgot your password?

Don't have an account yet?
Create account