This is the Maclan Charge Cable, for use with 2S or 4S LiPo charge applications with the Junsi ICharger X6 and ISDT Chargers. This charge lead is 60cm in length and features 12 awg cables. This charge lead features 4mm/5mm step down bullet connectors, to fit batteries that feature 4mm and 5mm bullet holes, with XT60 connector on the charger inputs. NOTE: Will not work with Gens Ace using the proprietary balance lead. This features a standard XH balance lead. Specifications:Length: 60cmCables: 12AWG Connectors: 4mm/5mm step down bullet connectors Compatible Chargers: iCharger X6 and ISDT models Compatible batteries: 2S or 4S Li-Po packs
This is a Junsi X12 Lilo, LiPo, Life, NiMH, NiCD DC Battery Charger is a palm-sized charger that's packed with an unbelievable 1100W and 30A of power packed into a miniature frame, full of features only seen in advanced chargers.The charger shares the accessible and easy-to-understand user interface found in the popular Duo iChargers. Features: The X12 supports up to 12s LiPo, Lilo, LiFe, LiHV, LTO, NiZn batteries with a maximum 2A balance current, and it utilizes a unique balance calculation of internal resistance correction. Intelligent fan control. The internal temperature sensor detects internal temperature, allowing the charger to control fan speed. Internal temperature protection. When the internal temperature exceeds the power reduce temperature, the output power is automatically reduced, and the charger will shut down when temperature exceeds the shut-down temperature. This charger can save 32 parameter settings and support the data import/export to SD Card. A 2.4" IPS LCD Screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time consuming and temperature, etc. Multi discharge features: self discharge, regenerative to input discharge, and lithium battery extra expanding discharge. Supports measurement for internal resistance of batteries both offline and online. Can measure not only the internal resistance of the entire battery pack but also the internal resistance of each cell within the lithium battery. The X12 has protection for reverse polarity, input oor output. Supports software updates via USB port or SD card. The X12 also supports the “Junsi Console” software, which displays, plots, and analyzes the charge and discharge data. Specifications: Input voltage range: 11-53VDC Maximum input current limit: <35A Maximum charge/discharge current: 30A Max. output voltage/current for digital power supply: 50V/30A Maximum charge power capacity: 1100W Maximum discharge power capacity: 50W built in Maximum regenerative discharge power capacity: 1100W Maximum extra discharge power capacity: 1500W@50V/40A Maximum current drain for balancing: >2.0A Display: 2.4 " IPS LCD (320×240) Net weight: 230g Dimensions: 112 × 64× 37 ± 0.5 mm
The 4010DUO uses advanced high current and high-performance synchronous buck-boost DC/DC converter technology to deliver up to 2000W of charging power, with a maximum charge/discharge current of up to 40A per channel and two channels in Synchronous Mode up to 70A! Each channel supports 10S lithium batteries, while the impressive TFT LCD screen provides critical battery information including current, voltage, power, capacity, internal resistance, control status, time-consuming, temperature, and more. 64 parameters sets can be saved without repeat settings, simply import/export via an SD card. The 4010DUO applies a 1.2A balance current, and uses a unique "internal resistance correction" balance calculation, and the discharge features include discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. Plus, the 4010DUO can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of the individual cells within the battery. Internal temperature protection keeps the charger operating safely and efficiently. When the internal temperature exceeds the threshold, the output power is automatically reduced and the charger will shut down when the temperature exceeds the cut-temperature. The intelligent fan control senses the internal temperature and uses an internal temperature sensor to control the fan speed. The 4010DUO has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, time overrun, maximum power and more, while the multi-discharge features include discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. The hardware programming can be updated through the USB port. The 4010DUO also supports “Logview” software to display, plot and analyze the charge and discharge data.Features: 1400W of charging power per channel, 2000W when both channels are combined Maximum charge current of up to 40A in Asyn. Mode, 70A in Sync Mode Maximum discharge current of 130W per channel, 200W when both channels are combined Each channel supports 10S lithium batteries TFT LCD screen displays current, voltage, power, capacity, internal resistance, control status, time-consuming, temperature and more 64 parameter sets can be saved Measures internal resistance of the battery pack, and also the per-cell internal resistance 1.2A balance current, and uses a unique "internal resistance correction" balance calculation Internal temperature protection Intelligent fan control Multi-discharge features: discharge-self, regenerative to input discharge, regenerative to channel discharge, and lithium battery extra expanding discharge. Supports upgrading the hardware program by USB port Supports “Logview” software to display, plot and analyze charge and discharge data To download the product manual click here.Specifications: Input Voltage Range: 9.0—50.0VDCMaximum Input Current Limit: <65AMaximum Charge/Discharge Current: 70A@in sync mode / 40A in async modeMaximum Charge Power Capacity: 2000W (Channel 1400W @input > 23.5V)Maximum Discharge Power Capacity: 200W (Channel 130W)Maximum Regenerative Discharge Power Capacity: 2000W (Channel 1400W)Maximum Extra Discharge Power Capacity: 3200W (Channel 1600W @40V/40A)Maximum Current Drain for Balancing: 2.4A in sync mode, 1.2A in async modeNet Weight: 1.47kgDimension: 210.0×140.1×80.2mm ±0.5mm Warranty Information: Please note for this particular unit, A-Main Hobbies does not handle the warranty service and will need to ship the unit to Junsi for repair or replacement. For this reason, we ask that you please allow 3-4 weeks for warranty service. WARNING NOTE: This charger is not compatible with Traxxas iD equipped LiPo Batteries; only Traxxas iD chargers properly charge Traxxas iD LiPo Batteries. NEVER, UNDER ANY CIRCUMSTANCES, use this charger to charge a Traxxas iD equipped LiPo Battery.