5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is perfect for 1/10 scale cars, trucks, and buggies! Features a huge capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need. Includes an EC3 connector on the discharge leads.
Features
High-end performance and reliability at an affordable price
Perfect for 1/10 scale cars, trucks, and buggies
Features a huge capacity for extended run times and a gigantic C rating so you'll have all the power you'll ever need
Includes an EC3 connector on the discharge leads
Dimensions:
Length: 138mm (5.43 in.)
Width: 47mm (1.85 in.)
Height: 25mm (0.98 in.)
Weight: 266g (9.38 oz)
This is a pack of four replacement ECX Dogbones, for use with the ECX 1/18 Temper Mini Rock Crawler. These dogbones can be used in the front or rear.
COMPATIBILITY:
ECX Temper 1/18
This is a replacement ECX Complete Shock Set. Package includes four shocks, four shock cap bushings and replacement pre-load clips.
COMPATIBILITY:
ECX Roost 1/18
ECX Ruckus 1/18
ECX Torment 1/18
This is a replacement ECX Caster Block, Steering Block & Rear Hub Set. Package includes two caster blocks, two steering blocks and two rear hubs that are compatible with all ECX 1/10 2wd models.
COMPATIBILITY:
ECX AMP Desert BuggyECX AMP Monster TruckECX BoostECX CircuitECX RuckusECX Torment
This is a replacement ECX Body Mount Set. Package includes plastic front and rear body mount components.
COMPATIBILITY:
ECX Ruckus 1/18
ECX Torment 1/18
This is a replacement ECX Spindle, Hub & Carrier Set. Package includes two spindles, two rear hubs and two spindle carriers.
COMPATIBILITY:
ECX Roost 1/18
ECX Ruckus 1/18
ECX Torment 1/18
This is a replacement ECX Slipper Assembly. Package includes all the parts needed to build one slipper assembly.
COMPATIBILITY:
ECX Roost 1/18
ECX Ruckus 1/18
ECX Torment 1/18
This is a replacement ECX Suspension Arm Set. Package includes two front suspension arms and two rear suspension arms.
COMPATIBILITY:
ECX Roost 1/18
ECX Ruckus 1/18
ECX Torment 1/18
This is an optional pack of RPM EXC Torment, Ruckus & Circuit Rear A-Arms. They’re stronger than stock, beefier to help survivability during those unexpected incidents, and built to tighter tolerances, making critical suspension settings much easier to lock down. They’re also lighter than stock by 4 grams each (or 8 grams in total for both rear A-arms). That means they’re 21% lighter than stock rear A-arms!Similar to the front A-arms, RPM rear A-arms look better than stock and are more functional in their design. The angled leading and trailing edges are more aerodynamic and allow the A-arms to transition up and over objects much more easily, helping to reduce dirt buildup. Huge bosses around the hinge pins were added as well, reducing the possibility that a big hit will stretch the hinge pin holes. The tiny outer hinge pin locking screw has been changed in favor of an in-line retaining screw. This helps improve overall A-arm strength while keeping the outer hinge pin locked solidly in place.
COMPATIBILITY:
ECX Circuit
ECX Ruckus
ECX Torment
This is a pack of two optional RPM Black A-Arms, intended for use with the ECX Torment, Ruckus and Circuit 1/10 scale vehicles. Strong and beefy, these A-arms offer protection during those unexpected incidents, and are built for tighter tolerances, making critical suspension settings much easier to lock down.
Stylistic and aerodynamic, these A-arms push up and over objects far easier than the blunt, flat-edged design of stock products. Huge bosses have been added around the hinge pins, reducing the possibility that heavy impact stretch the hinge pin holes. The tiny outer hinge pin locking screw has been replaced in favor of an in-line screw, helping to improve overall A-arm strength while keeping the outer hinge pin locked solidly in place.They are designed with a tough blend of engineering grade nylons and backed by a limited lifetime manufacturer's warranty.
COMPATIBILITY:
ECX Circuit
ECX Ruckus
ECX Torment