This is a replacement Team Losi Racing SCTE Conversion Carbon Rear Shock Tower, intended for use with the optional Team Losi Racing SCTE to 22 Shock Conversion Set (TLR334029).
Features:
Rear shock tower is the replacement part for TLR334029 Shock Conversion Set, SCTE to 22: SCTE 2.0. Will not work correctly with TEN series shocks
Offers additional low rear camber link adjustments. Shock mounting positions have been adjusted for use with the 22 shock lengths
Made from super strong and very light Carbon Fiber for ultimate strength and lightweight performance
COMPATIBILITY:
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
This is a replacement Team Losi Racing Carbon Front Shock Tower, and is intended for use with the Team Losi Racing TEN-SCTE 2.0 1/10 scale 4WD short course truck.
COMPATIBILITY:
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
This is an optional Team Losi Racing 22-4 Titanium Turnbuckle Set.
Features:
Turnbuckles are 3.5mm in diameter at the threads for durability
Titanium is very strong and much lighter than the stock steel turnbuckles
COMPATIBILITY:
Losi 22-4
This is a optional RCScrewz Stainless Steel screw kit for the Losi 22-SCT 2.0. RCScrewz Stainless Screw Kits are 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.All RCScrewz Kits include:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the these kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations.
.
This is an RCScrewz TLR 22 2.0 2wd Buggy Stainless Steel Screw Kit. The RCScrewZ Stainless Screw Kit is 100% complete and includes everything needed to do a full conversion and more. The quality of the Stainless Steel Screw Kits far surpasses any stock screws included with you RC; forget about stripped heads and bent, corroded, or rusted screws. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.
Includes:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the the kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of RC Screwz field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations.
.
This is an RCScrewz TLR 22-4 4wd Buggy Stainless Steel Screw Kit. The RCScrewZ Stainless Screw Kit is 100% complete and includes everything needed to do a full conversion and more. The quality of the Stainless Steel Screw Kits far surpasses any stock screws included with you RC; forget about stripped heads and bent, corroded, or rusted screws. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.
Includes:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the the kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of RC Screwz field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations.
This is a Team Losi Racing Carbon Fiber Battery Cradle, intended for use with the Team Losi Racing 22 5.0 2WD Electric Buggies as an optional battery cradle.
COMPATIBILITY:
Losi 22 5.0 AC
Losi 22 5.0 DC
Losi 22 5.0 Elite
Losi 22 5.0 SR
This is a replacement Team Losi Racing 22X-4 Carbon Rear Shock Tower, intended for use with the TLR 22X-4 Race Kit. This part is cut from quality carbon plate.
Losi 22X-4
This is an optional Team Losi Racing 22x-4 Aluminum Drag Link, intended for use with the 22X-4 1/10 4WD Buggy Race Kit. This part is machined from quality aluminum to be lightweight and dependable.
This is an optional Team Losi Racing Aluminum Rear Gearbox Bearing Insert Set, and is intended for use with the Losi TEN-T, TEN-SCT, and TEN-SCTE 1/10 scale 4WD short course trucks, as well as the 810 buggy. These aluminum inserts are hard anodized for maximum durability that will last the life of the vehicle. In addition, the inserts are also keyed allowing them a precise fit resisting any rotation or possible drivetrain failure. This set includes a left and right side insert and four shims.
Features:
High-durability aluminum allows inserts to be used for the life of the vehicle
Hard anodized to improve durability and be resistant against scratching
Left and right side inserts key into gearbox to disallow any rotation of the inserts that can cause drivetrain failure
12.2x14.8x.2mm shims included for differential shimming
COMPATIBILITY:
Losi 810
Losi TEN-SCT Nitro
Losi TEN-SCTE
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
Losi TEN-T
This is an optional Team Losi Racing SCTE Aluminum Front Top Brace. This top brace replaces the stock plastic brace for improved strength and rigidity.
Losi TEN-SCTE
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0
This is an optional Team Losi Racing 8IGHT-X Aluminum Servo Horn. This servo horn is compatible with servos that feature a 25 tooth spline; such as ProTek R/C, Savox and Futaba.
This horn is exclusively used for the steering servo features a clamping design for the upmost in holding power.
Losi 8IGHT XT/XTELosi 8IGHT-XLosi 8IGHT-X EliteLosi 8IGHT-XE Race
This is a replacement Team Losi Racing 22X-4 Aluminum Servo Mounts, intended for use with the TLR 22X-4 Race Kit. These parts are machined from quality aluminum alloy.
Losi 22X-4
This is a pack of two replacement Team Losi Racing SHDS Grooved Slipper Plates.
COMPATIBILITY:
Losi 22 5.0 ACLosi 22 5.0 DCLosi 22 5.0 EliteLosi 22 5.0 SR
This is the Team Losi Racing Plastic 1/8 Buggy Wing. This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions. Package includes one wing, two wickerbills and hardware.
COMPATIBILITY:
Losi 8IGHT XT/XTE
Losi 8IGHT-X
Losi 8IGHT-X Elite
Losi 8IGHT-XE Race
This is a replacement Team Losi Racing Machined Shock Bushing Set. This can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles. These lower cartridge bushings are machined for a more precise fit, and for the best results should be used with the x-ring o-rings included with the TLR233005 seal set.
COMPATIBILITY:
Losi 22 1.0 Losi 22 2.0 Losi 22 3.0 Losi 22 3.0 SPEC-Racer Losi 22 4.0 Losi 22 4.0 SPEC-Racer Losi 22 5.0 Elite Losi 22-4 2.0 Losi 22SCT 1.0 Losi 22SCT 2.0 Losi 22SCT 3.0 Losi 22T 1.0 Losi 22T 2.0 Losi 22T 3.0 Losi 22T 4.0 Losi TEN-SCTE 3.0
This is a replacement set of two Team Losi Racing 22X-4 67mm Rear CVA Driveshaft Bones, intended for use with the TLR 22X-4 Race Kit. Package includes two driveshaft bones.
COMPATIBILITY:
Losi 22X-4
This is an optional Team Losi Racing "Hard" Front Spring Set, for use with the 22T, 22SCT and TEN-SCTE series of trucks. This set includes three pairs of different rated front springs.
The Hard Front Spring Set allows for a firmer suspension feel. The three included springs are only separated by .3 lbs/in increments allowing for very fine tuning to get your TLR Truck dialed in. These firmer springs reduce the roll rate of the front end of the truck, keeping it flatter and allowing it to transition from left-to-right more quickly.
Springs included in order from softest to stiffest:
Purple 4.4 lbs./in
Brown 4.7 lbs./in
Light Blue 5.0 lbs./in
Features:
Three Pairs of Hard Front Springs 22T, 22SCT and TEN-SCTE platforms
Paint Markings - Each spring is marked with a paint swatch at the end of the spring for easy identification
Black Oxide Finish - The black oxide finish works as protection from corrosion
Compatibility:Losi 22SCTLosi 22TLosi TEN-SCTELosi TEN-SCTE 2.0
This is a replacement Team Losi Racing 8IGHT-X Front Arm Set with included arm inserts. Mounting hardware not included.
Losi 8IGHT-X
Losi 8IGHT-X Elite
Losi 8IGHT-XE Race
This is an optional set of two Team Losi Racing 22X-4 68mm CVA Driveshaft Bones, intended for use with the TLR 22X-4 Race Kit. These driveshaft bones are used in the front/center position.
Losi 22X-4
This is a replacement set of two Team Losi Racing Deep Yolk Rear CV Driveshafts, intended for use with the TLR 8IGHT-X Elite 1/8 buggy.
Losi 8IGHT-X Elite
This is a pack of four replacement Team Losi Racing SCTE Conversion Shock Pivot Balls, intended for use with the optional Team Losi Racing SCTE to 22 Shock Conversion Set (TLR334029).
Features:
Fits 22 shock ends to SCTE front and rear arms
Spare parts for TLR334029 Shock Conversion Set, SCTE to 22: SCTE 2.0
COMPATIBILITY:
Losi TEN-SCTE 2.0