Kyosho

49 products

  • Last stock! Kyosho Fazer Mk2 FZ02 2006 Subaru Kyosho Fazer Mk2 FZ02 2006 Subaru

    Kyosho Fazer Mk2 FZ02 2006 Subaru

    1 in stock

    Fazer Mk2 FZ02 2006 Subaru Impreza WRC, Blue, 1/10 Electric 4WD For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: The body is the "Subaru Impreza WRC 2006" that participated in the 2006 World Rally Championship (WRC) wearing bright WR blue and six-star coloring that shines yellow. The body specifications are semi-assembled specifications in which the customer finishes the decals such as the Subaru logo to WRC specifications. Original low-profile semi-slick pattern tires produce superior performance and combine with 15-spoke wheels for stunning visuals. Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Full ball bearings that reduce drive loss equipped throughout the drive system. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale.

    1 in stock

    $239.99

  • Last stock! Kyosho MR-03 Mini-Z Racer ReadySet w/Audi R8 2010 LMS Body (Yellow/Blue) & KT-531P 2.4GHz Kyosho MR-03 Mini-Z Racer ReadySet w/Audi R8 2010 LMS Body (Yellow/Blue) & KT-531P 2.4GHz

    Kyosho MR-03 Mini-Z Racer ReadySet w/Audi R8 2010 LMS Body (Yellow/Blue) & KT-531P 2.4GHz

    2 in stock

    RWD chassis & Syncro KT-531P transmitter launch the next generation of MR-03 The Kyosho MR-03 RS Mini-Z Sports 2 ReadySet allows anyone to enjoy the beautiful style and advanced performance of modern R/C cars. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The updated control program on the redesigned circuit board provides linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (KYOMZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars! NOTE: Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.Features: Includes the Syncro KT-531P transmitter with multiple setting options. Redesigned circuit board with updated control program dramatically improves steering feel. Highly detailed display-standard body is fully factory finished. Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately. Front suspension incorporates VCS that optimizes camber angle with suspension stroke. Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. Compatible with optional LED light unit clear & red (MZW429R). Specifications:Length: 166.0mmWidth: 78.0mmHeight: 44.0mmWheelbase: 98mm (LL)Chassis: RWD (MR-03)Front Wheel Offset: Narrow +2.5mm (for RWD)Rear Wheel Offset: Wide +3.0mm (for RWD)R/C System: Syncro KT-531PIncludes: Factory assembled chassis Pre-painted plastic body, complete with markings Perfex KT-531P 2.4GHz transmitter Front tread adjustment parts set Pinion gears 6T,7T,8T,9T and tool Spare wheel nuts and wrench Mini pylons Needed to Complete: (4) AAA-size alkaline or Ni-MH batteries for chassis (4) AAA-size alkaline batteries for transmitter

    2 in stock

    $199.99

  • Kyosho MB-010VE Mini-Z Buggy Turbo Optima Readyset w/2.4GHz Radio Kyosho MB-010VE Mini-Z Buggy Turbo Optima Readyset w/2.4GHz Radio

    Kyosho MB-010VE Mini-Z Buggy Turbo Optima Readyset w/2.4GHz Radio

    4 in stock

    The Kyosho MB-010VE Mini-Z Buggy Turbo Optima Readyset makes it easy to join in the RC action by simply adding eight AAA-size alkaline batteries. Plus, this kit pays homage to the renown Turbo Optima Mid, only in mini form, making this a fun option for collectors as well! The advanced compact design includes 4WD drive train with slipper clutch to protect the gear system, and 4-wheel independent double wishbone suspension with oil-filled shocks to deliver true racing buggy performance. Most critical components are protected within the high-rigidity dustproof chassis shell. 7-stage geared steering servo provides plenty of torque for precision steering response and combines with the control program to deliver the MINI-Z’s signature linear handling and light feel. The circuit board also features manual volume adjustment for the optional gyro unit (sold separately) that stabilizes straight line running and improves cornering control. Modeled after the classic Turbo Optima Mid, the MINI-Z buggy body features the classic color scheme complimented by dish wheels and pin tires to create a sharp looking machine. The fully pre-assembled Readyset package makes it simple and enjoyable for anyone to experience the fun of advanced mini-buggy performance.  NOTE: As the Readyset includes the Syncro KT-531P transmitter operating on FHSS 2.4GHz, it cannot be used with ASF/MHS/FHS 2.4GHz systems. Features: Readyset package allows model to be enjoyed straight after purchasing batteries. Fully pre-assembled chassis with printed polycarbonate body. Real racing performance will please buggy owners. Great for indoor practice. Includes Syncro KT-531P transmitter. Allows various setting adjustments such as steering angle. FHSS 2.4GHz R/C system removes the need to manage frequency bands. Frequency crystals are not required and up to 40 cars can be run at the same time. Optional gyro unit set (MZW431) can be installed. Gyro sensitivity can be manually adjusted on the chassis. Most optional parts already released for MINI-Z Buggy can be installed. Specifications: Length: 167mm Width: 106mm Height: 56mm Wheelbase: 115mm Tread (F/R): 89mm/89mm Tire (F/R): F37 x 13.5mm/F37 x 18.5mm Weight: 200g (approx.) Motor: 130 class Battery: AAA alkaline x 4 (not included) Radio System: KT-531P FHSS 2.4 GHz Includes: Factory assembled chassis with pre-installed R/C unit KT-531P transmitter Pre-painted polycarbonate body finished with markings Pinion gears (11T, 13T, 15T) Spur gears (33T, 35T) Pinion gear tool Pairing stick Wheel wrench Spare nuts for wheels Needed to Complete: (4) AAA alkaline or NiMH batteries for chassis (4) AAA alkaline batteries for KT-531P transmitter

    4 in stock

    $189.99

  • Kyosho MR-03 Mini-Z RWD ReadySet w/Corvette ZR1 Body & KT-531P 2.4GHz Transmitter Kyosho MR-03 Mini-Z RWD ReadySet w/Corvette ZR1 Body & KT-531P 2.4GHz Transmitter

    Kyosho MR-03 Mini-Z RWD ReadySet w/Corvette ZR1 Body & KT-531P 2.4GHz Transmitter

    3 in stock

    With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars! Factory assembled chassis Pre-painted plastic body, complete with markings Perfex KT-531P 2.4 GHz transmitter Front track width adjustment parts Pinion gears 6T, 7T, 8T, 9T and tool Spare wheel nuts and wrench Mini pylons  

    3 in stock

    $179.99

  • Last stock! ProTek RC 3S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (11.4V/4800mAh) Crawler Pack w/T-Style Plug ProTek RC 3S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (11.4V/4800mAh) Crawler Pack w/T-Style Plug

    ProTek RC 3S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (11.4V/4800mAh) Crawler Pack w/T-Style Plug

    2 in stock

    The ProTek R/C 3S 130C Low IR Silicon Graphene + HV Shorty LiPo Battery was developed specifically for 1/10 scale rock crawler and rock racer applications. 3S packs that are commonly used in the crawler world are either small, low capacity packs - or large, heavy 4000-5000mAh packs. This 4800mAh battery fills the void and gives scalers a high capacity option that produces more voltage and longer runtimes than a 2200mAh. Plus, when charged at LiHV specs this battery produces 13.05V, instead of the standard 12.6V of a fully charged standard LiPo, meaning performance oriented enthusiasts can take advantage of the light weight, and higher voltage throughout the discharge curve to give them a more consistent power delivery with less fade on the course! Want more reasons to run this pack? When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage - but Graphene + 130C LiPo batteries take that a step further with lower internal resistance, more power, and 300mAh more capacity when compared to the previous ProTek 3S LiHV!  Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for enthusiasts that demand the absolute best.  Features: Comparable weight to a 2200mAh pack, 100g lighter than EcoPower 4100mAh 15 grams heavier than the original LiHV 3600 3S battery, and 900mAh more capacity Great choice for scalers and U4 racers Great choice for pro class 3S drag racing, boats and airplanes too Improved power to weight ratio and a lower overall CG Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells 10C max charge rates - 1C charge rate recommended for longest life 11.4V nominal voltage NOTE: While these batteries are technically LiHV cells, they can still be charged with a standard LiPo charger. The overall voltage and capacity will be slightly less than if charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the reduced weight and low internal resistance.      Battery Model HV Shorty 3S LiPo Application Crawlers, Drag, Boats & Aircraft Type Silicon Graphene  Voltage 11.4V nominal Capacity @11.1V 4300mAh Capacity @11.4V 4800mAh Weight 245g Connector Type T-Style Balance Connector 4 Pin XH Number of Cells 3 Cell Configuration 3S1P Dimensions (WxLxH) 43x93x25.7mm Maximum Charge Rate 10C (45A) Burst Current 130C Watt Hour @11.4V  54.7Wh       Includes:  (1) ProTek R/C Battery w/T-Style Connector LITHIUM POLYMER SAFETY INFORMATION IMPORTANT:1) DO NOT leave the battery in your model when charging2) DO NOT leave unattended when charging3) ALWAYS balance charge the battery4) ALWAYS use a LiPo charging bag5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)6) YOU MUST not over discharge the Li-Poly battery pack7) READ & UNDERSTAND the instructions carefully before operating this batteryNOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. COMPATIBILITY: Axial RR10 Bomber 1.0Axial RR10 Bomber 2.0Axial SCX10 IAxial SCX10 IIAxial SCX10 IIIAxial SMT10Axial Wraith 2.2GMade BOMGMade KomodoGMade SawbackMST CFXMST CFX-WMST CMXSSD Trail KingVaterra Ascender

    2 in stock

    $59.99

  • PN Racing Anima HSTG Digital Micro Servo 6.45g PN Racing Anima HSTG Digital Micro Servo 6.45g

    PN Racing Anima HSTG Digital Micro Servo 6.45g

    3 in stock

    Anima HSTG Digital Micro Servo Part# 500380 Operating Voltage Range 4.8V to 6V No Loading Speed: 0.040s at 5.0V, 0.034s at 6.0V, 60 degree Peak stall Torque: 0.72kgf.cm @5.0V, 0.93kgf.cm @6.0V Chrome-Titanium Alloy Gear Aluminum Case Size 19.6×8.0x18.0mm Mounting screw distance 24mm JST 1.5 3Pin Plug Comes with a POM servo horn set. Compatible with: Atomic BRZ BZ BR3, GL Racing GLA GLR GLR-GT GLF, HRC GLD, RTRC chassis

    3 in stock

    $54.99

  • Last stock! KYOSHO ASC MR03W-MM Audi R8 LMS 2015 "White" Autoscale Body MZP246AS

    KYOSHO ASC MR03W-MM Audi R8 LMS 2015 "White" Autoscale Body MZP246AS

    2 in stock

    ASC MR03W-MM Audi R8 LMS 2016 “White” MZP246W White Audi R8 LMS 2016 Mini-Z Autoscale body. MINI-Z MR-03W-MM Wheel Base:LL(98mm) Wheel Off Set:F:N+1.5 / R:W+1.5 White Body No.:MZN189 F.Body Mount No.:MZN189-2 *This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.  

    2 in stock

    $49.99

  • Last stock! KYOSHO ASC MA020N DODGE CHALLENGER SRT HELLCAT REDEYE B5 Blue Autoscale Body MZP451BL

    KYOSHO ASC MA020N DODGE CHALLENGER SRT HELLCAT REDEYE B5 Blue Autoscale Body MZP451BL

    1 in stock

    MZP451BL ASC MA020W DODGE CHALLENGER SRT B5 Blue B5 Blue DODGE CHALLENGER SRT Mini-Z Autoscale body. Fits MA020-W AWD. Wheelbase: 98mm (LL) Wheel OffSet: F: N +1.5 / R: W +1.5 Genuine Kyosho Auto Scale Bodies.

    1 in stock

    $49.99

  • Last stock! KYOSHO ASC MA020S SUBARU WRX STI WR Blue Autoscale Body MZP461BL KYOSHO ASC MA020S SUBARU WRX STI WR Blue Autoscale Body MZP461BL

    KYOSHO ASC MA020S SUBARU WRX STI WR Blue Autoscale Body MZP461BL

    1 in stock

    ASC MA-020-N Subaru WRX STI WR Blue MZP461BL Blue Subaru WRX STI Mini-Z Autoscale body. Fits MA-020N Wheelbase: LL 98mm Wheel Offset: F: N+1.5 / R: N+1.5

    1 in stock

    $49.99

  • Last stock! Kyosho Mini-Z EVO Futaba T7PX/T7XC Receiver Unit

    Kyosho Mini-Z EVO Futaba T7PX/T7XC Receiver Unit

    1 in stock

    This is a replacement Kyosho Mini-Z EVO Receiver Unit, intended for use with the MINI-Z EVO chassis set ups using Futaba T7PX and T7XC transmitters.

    1 in stock

    $46.99

  • Last stock! PN Racing Mini-Z V4 94-98mm Motor Mount (Orange)

    PN Racing Mini-Z V4 94-98mm Motor Mount (Orange)

    1 in stock

    PN Racing Mini-Z V4 94-98mm Motor Mount Features: -Compatible with MR015, MR02 and MR03 -Wheelbase adjustable from 94mm to 98mm.   - 98mm Configuration Must use PN racing disc damper system (MR2060 or MR2061 or MR2063),Also recommended for 94mm configuration.   -Wheelbase adjusted with only 4 screws. -Wheelbase adjustment does not affect gear mesh or suspension set-up. Allows quick testing of different wheelbase at the track. -Motor drops down for adjustment without affecting suspension set-up especially on a tri-damper set-up. -Multiple motor height positions possible for all track surfaces. -Four ride height adjustments with 2 eccentric bearing holders. -The ultimate motor mount. Results of years of improvement to Mini-Z motor mount designs. Attention: This motor mount only working with the motor with 2 screw holes, all Kyosho motor can't directly install to this motor mount You can use kyosho motor With optional parts "MR3311D"

    1 in stock

    $45.99

  • Last stock! Kyosho Mini-Z MR-03 2.0 Mini-Z Unit Set (RA38)

    Kyosho Mini-Z MR-03 2.0 Mini-Z Unit Set (RA38)

    1 in stock

    Kyosho MR-03 2.0 Mini-Z Unit Set. This replacement unit set is intended for the RWD Kyosho MR-03 Mini-Z chassis. The built in receiver unit is designed to work with the FHSS KT531/431PT units. Package includes one R/C unit set.NOTE: Only compatible with the MZW446 Gyro only.

    1 in stock

    $39.99

  • Last stock! Atomic MRZ Aluminium Chassis Set (with 3 pair brass weight)

    Atomic MRZ Aluminium Chassis Set (with 3 pair brass weight)

    1 in stock

    Atomic MRZ Aluminium Chassis Set (with 3 pair brass weight)

    1 in stock

    $29.99

  • Last stock! R246 Mini-Z Steering Block for MR03 Camber 1

    R246 Mini-Z Steering Block for MR03 Camber 1

    1 in stock

    Kyosho R246-1311B Steering Block for MR-03 Camber 1

    1 in stock

    $27.99

  • Last stock! Kyosho Mini-Z XSPEED MINI-Z MOTOR-V (MR-03EVO)

    Kyosho Mini-Z XSPEED MINI-Z MOTOR-V (MR-03EVO)

    1 in stock

    XSpeed Mini-Z Motor-V (MR-03EVO) Mini-Z X Speed brushed motor for MR03 Evo. I.C.S. USB adapter is required to change to brushed mode.

    1 in stock

    $23.99

  • PN Racing Mini-Z V2 PNWC Ball Bearing Motor 43 Turn

    PN Racing Mini-Z V2 PNWC Ball Bearing Motor 43 Turn

    4 in stock

    2015 Motors V2 Series 43T Spec - New Brushes- Balanced armature- New endbell design for increased cooling- Bottom case air cool scoop intake- JAPAN Ball Bearing Warning: This Motor is designed to work with upgraded ESC or ESC with stacked FET ONLY.  Please DO NOT use this motor on your Readyset to prevent damage to your electronics.

    4 in stock

    $19.99

  • ProTek RC 2x1S Sport Race 15C Stick LiFe Battery (3.3V/500mAh) (Kyosho Mini-Z)

    ProTek RC 2x1S Sport Race 15C Stick LiFe Battery (3.3V/500mAh) (Kyosho Mini-Z)

    4 in stock

    This is a pack of two ProTek R/C 1S "Sport Race" LiFe 15C Stick Battery Packs. These are designed specifically for the Kyosho Mini-Z vehicles, and are a great performance upgrade for Mini-Z racing! Lithium battery technology is evolving. With cell dimensions that fit anywhere a standard Li-Poly battery will and rapidly increasing capacity, LiFe chemistry will soon set the standard that all others are judged by. With the ability to deliver 1000+ usable cycles, and a life span up to 4 times longer than Li-Poly batteries (when cycled under the same discharge conditions), these batteries offer the user an excellent balance of performance and value. LiFe batteries are more durable than Li-Poly and are able to handle a higher level of abuse when compared to Li-Poly without the risk of pre-mature failure. Unlike LiPo, LiFePO4 cells can be stored in a fully charged state with little to no loss in stored power, and can be discharged deeper with less risk of damage to the cells. Most importantly, LiFe batteries are SAFE! There is no risk of combustion! LiFe cells will not catch fire or explode when over charged, or after a deep discharge.NOTE: The use of unique charging and discharging harnesses are required to use these batteries with Mini-Z vehicles.What about the voltage?A 1 Cell LiFe battery produces 3.3 volts nominal, which is almost a half volt less than a 1 Cell Li-Poly battery. The LiFe battery is not meant to replace the performance of a Li-Poly battery, it is simply another option. LiFe offers the user a battery with a good discharge curve that is better than that of a NiMH battery, but without the risk of damage or fire that exists when a Li-Poly battery is abused.When used as a power source for a electric motor, there will be a loss in peak RPM, but that can be resolved with a simple swap of the pinion gear to achieve similar speed or use a motor with a higher kV. Many drivers find that the reduced voltage allows them to run faster lap times with more control, especially on low traction surfaces. NOTE: Brand new LiFePO4 batteries have been found to fail prematurely if they are deep discharged below 33% capacity too early. A break-in period of 20 cycles is currently recommended. While testing has shown that this battery can be charged at up to 5C rates, it recommended that this battery not be charged at rates higher than 1C to maximize the lifespan of the battery. Additionally, LiFe batteries should not be discharged below 2.5V per cell to avoid pre-mature failure and maximize battery life span.We also recommend you REMOVE the batteries from your cars, or at least unplug them to avoid accidental over discharge if the unit is left on.IMPORTANT:1) You will need a LiFe specific charger to charge the pack (NiMH, NiCD or Li-Poly only chargers WILL NOT WORK!)2) You must not discharge the LiFe battery pack below 33% capacity during the break in period or below 2.5V per cell after break in.3) You must not charge this LiFe battery pack at amp rates higher than 1C.4) Read the instructions carefully before operating this battery.View Manual Icon small Warranty Info Icon smallFeatures:Safe chemistry will not explode or catch fireMore mAh per gram compared to NiMH cells, meaning lighter models, and longer runtimeVirtually no "self discharge", so the battery is always ready to go even weeks after charging.Superior voltage performance under load compared to NiMH cells, with consistent torque and speed.Fast charge timeSpecifications:Voltage: 3.3VCapacity: 500mahChemistry: LiFePO4Charge Rate: 1CDischarge rate: 15CDischarge Plug: Mini-Z connectorDimension (LxWxH): 47x18.5x9.7mmWeight: 14g each COMPATIBILITY: Kyosho MA-010/MA-015 Kyosho MA-020 Kyosho MB-010 Kyosho MR-02 Kyosho MR-03

    4 in stock

    $16.99

  • PN Racing Mini-Z PNWC 70 Turn Ball Bearing Motor

    PN Racing Mini-Z PNWC 70 Turn Ball Bearing Motor

    6 in stock

      *MR03 SPORT support this motor with gear ratio not lower than 4.75* New Version with BALL BEARING New 2010 Motors Series from 32T to 80T Spec - New Brushes and Brushes Holder, timing setting- Balanced armature- New endbell design for increased cooling- Bottom case air cool scoop intake- JAPAN Ball Bearing

    6 in stock

    $14.99

  • Last stock! DE Racing 12mm Hex "Speedline" 2.2 1/10 Buggy Front Wheels (4) (B6/RB6) (Black)

    DE Racing 12mm Hex "Speedline" 2.2 1/10 Buggy Front Wheels (4) (B6/RB6) (Black)

    2 in stock

    This is a pack of four DE Racing "Speedline" 2.2 1/10 Buggy Front Wheels. Blending a traditional style dish wheel to the precision and durability DE Racing is known for, the Speedline series wheels make a statement to the racing community even larger than the logo on the face. Features include a channel for easier tire gluing, start holes for optional venting, and improved wheel flex to optimize traction and handling.Features: Clean dish face with DE Logo Improved wheel flex Glue channel 2.2 Diameter OEM offsets and widths Sold in packs of four Made In U.S.A. COMPATIBILITY: Kyosho Ultima RB5Kyosho Ultima RB6Team Associated RC10 B4 OriginalTeam Associated RC10 B4.1Team Associated RC10 B4.2Team Associated RC10 B5 OriginalTeam Associated RC10 B5MTeam Associated RC10 B5M Factory LiteTeam Associated RC10 B6 OriginalTeam Associated RC10 B6.1Team Associated RC10 B6.1DTeam Associated RC10 B6.2Team Associated RC10 B6.2DTeam Associated RC10 B6D

    2 in stock

    $13.99

  • Last stock! DE Racing Speedline Slim 2.2 2WD Buggy Front Wheel (Black) (4) (B6/RB6) w/12mm Hex

    DE Racing Speedline Slim 2.2 2WD Buggy Front Wheel (Black) (4) (B6/RB6) w/12mm Hex

    1 in stock

    DE Racing Speedline "Slim" 2.2 2WD Front Buggy Wheels for the Associated B6 and Kyosho RB6 blend a traditional style dish wheel to the precision and durability DE Racing is known for. The Speedline series wheels make a statement to the racing community even larger than the logo on the face. Features include a channel for easier tire gluing, start holes for optional venting, and improved wheel flex to optimize traction and handling. Package includes four wheels.Features: Fits B6 & RB6 Clean dish face with DE Logo Improved wheel flex Glue channel 12mm Hex 2.2 Diameter OEM offsets and widths Includes four wheels Available in Black, White, and Yellow Made In U.S.A. COMPATIBILITY: Kyosho Ultima RB5Kyosho Ultima RB6Team Associated RC10 B4 OriginalTeam Associated RC10 B4.1Team Associated RC10 B4.2Team Associated RC10 B5 OriginalTeam Associated RC10 B5MTeam Associated RC10 B5M Factory LiteTeam Associated RC10 B6 OriginalTeam Associated RC10 B6.1Team Associated RC10 B6.1DTeam Associated RC10 B6.2Team Associated RC10 B6.2DTeam Associated RC10 B6D

    1 in stock

    $13.99

  • ProTek RC Aluminum Clamping Servo Horn (Black or Blue) (25T-ProTek) ProTek RC Aluminum Clamping Servo Horn (Black or Blue) (25T-ProTek)

    ProTek RC Aluminum Clamping Servo Horn (Black or Blue) (25T-ProTek)

    9 in stock

    This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one black anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.Features: Clamp design 16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) 3.5mm thick arm 31mm Overall length Linkage holes threaded for 3mm hardware 25T Spline ProTek Output Shaft

    9 in stock

    $11.99

  • ONYX 1.2V 750mAh NiMH AAA Single Cells (4) RECHARGEABLE

    ONYX 1.2V 750mAh NiMH AAA Single Cells (4) RECHARGEABLE

    4 in stock

    Overview Choose ONYX batteries for the variety and quality to satisfy a wide range of applications — whether you need power for your radio, a replacement battery, an economical upgrade, or packs that will push the performance envelope. These batteries are available with all popular plug types, ensuring compatibility and solid, dependable connections. ONYX prices make every selection a great value. Adding to the value, ONYX backs each battery with an unprecedented 2-year limited warranty! Specifications Voltage Rating: 7.4V Rated Capacity: 3200mAh Maximum Charge Rate: 12.8A/3C Discharge Rate: 25C Burst Rate: 50C/160A Dimensions, L, W, H: 5.2 x 1.6 x 0.59" (132 x 42 x 15mm) Weight: 6.5oz (185g) Discharge Lead Wire Size: 12AWG Discharge Lead Length: 4" (102mm) not including connector Discharge Connector: Star Balancing Connector: JST-XH Watt Hours: 24 Battery Care Always use a LiPo-approved Charger and Cell Balancer. Never charge over 4.20V per cell. Never allow to discharge below 3.0V per cell. Never charge at currents greater than 3C. Never trickle charge. Never disassemble or modify pack wiring in any way or puncture cells. Never place on combustible materials or leave unattended during charging. Always charge in a fireproof location. Always set charger's output volts to match battery volts. Always keep out of reach of children.

    4 in stock

    $10.99

  • Reflex Racing Mini-Z MR-02 96mm Carbon Fiber T-plate Set V2 (2pc)

    10 in stock

    V2 version comes with 5mm and 6mm width, harder then V1 4mm and 5mm.Why hasn't anyone thought of this before? If you want handling characteristics somewhere inbetween 94mm and 98mm, why not try 96mm? These t-plates are 2mm longer to give you a 96mm wheelbase using a 94mm motor mount. Soft and hard widths.

    10 in stock

    $10.99

  • Kyosho 11mm Wide Racing Radial Tire (4) (40 Shore)

    Kyosho 11mm Wide Racing Radial Tire (4) (40 Shore)

    10 in stock

    This is a set of four Kyosho 11mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a directional pattern and the durometer hardness rating is etched on the inside of the tire.Choose from 10, 20, 30 or 40 Shore compounds (softest to hardest). Use different compounds to tune the level of traction for various track conditions; softer when you need more grip and harder when you want less grip. These tires must be used with 11mm wide wheels. COMPATIBILITY: Kyosho MR-02Kyosho MR-03

    10 in stock

    $9.99

  • Last stock! Kyosho Mini-Z Buggy MB-010 Suspension Pin Set

    Kyosho Mini-Z Buggy MB-010 Suspension Pin Set

    2 in stock

    Suspension Pin Set, for Mini-Z Bug

    2 in stock

    $9.99

  • PN Racing Mini-Z MR03 Aluminum Toe Out Tie Rod W -1 PN Racing Mini-Z MR03 Aluminum Toe Out Tie Rod W -1

    PN Racing Mini-Z MR03 Aluminum Toe Out Tie Rod W -1

    6 in stock

    This is PN Racing Aluminum Toe Out Tie Rod W -1 For Kyosho Mini-Z MR03. Feature: For: Kyosho Mini-Z MR03 Material: Aluminum Color: Black, Orange, Silver, or Blue Include:  PN Racing Aluminum Toe Out Tie Rod W -1  (1 pc)

    6 in stock

    $9.99

  • Last stock! PN Racing Mini-Z MR03 Alum Tie Rod W 0 PN Racing Mini-Z MR03 Alum Tie Rod W 0

    PN Racing Mini-Z MR03 Alum Tie Rod W 0

    2 in stock

    This is PN Racing Aluminum 0Degree Wide Tie Rod For Kyosho Mini-Z MR03. Feature: For: Kyosho Mini-Z MR03 Material: Aluminum Color: Black, Orange, or Blue Include: PN Racing Aluminum 0 Degree Wide Tie Rod Black (1 pc)

    2 in stock

    $9.99

  • FastEddy Kyosho Mini-Z RWD MR-03 Sealed Bearing Kit FastEddy Kyosho Mini-Z RWD MR-03 Sealed Bearing Kit

    FastEddy Kyosho Mini-Z RWD MR-03 Sealed Bearing Kit

    4 in stock

    Team FastEddy Kyosho Mini-Z RWD MR-03 Bearing Kit. FastEddy bearing kits include high quality rubber sealed steel bearings, with bearings specific for a particular application. So instead of spending more money than you need picking and choosing a bunch of individual bearings and ending up with leftover bearings you may not need, grab a FastEddy bearing kit and get your rig rolling smooth again. Includes:      (4)     2x6x2.5 (3)     3x6x2.5 NOTE:      Photo of unpackaged bearings shows random bearings and is not representative of what you will receive. In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. FastEddy does their best to keep the kits updated. If you find a variation or mistake in this kit, please contact us. COMPATIBILITY: Kyosho MR-03

    4 in stock

    $8.99

  • Last stock! PN Racing 4mm Banana Plug To XH Plug x3 Parallel Charging Cable PN Racing 4mm Banana Plug To XH Plug x3 Parallel Charging Cable

    PN Racing 4mm Banana Plug To XH Plug x3 Parallel Charging Cable

    2 in stock

    Prefect for SCX24 Stock Battery charging at 0.35A to 0.5A For Any 2S Lipo batteries with an XH connector (Balance Plug) This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the battery side, we have provided 3 x XH connectors so that you can charge/discharge up to 3 packs at the same time. Charge one battery is fine, if you charge 3 batteries together, make sure all batteries are the same type and capacity.Total length 18cm, protected by PE wrapHigh-quality Silicon wire 14AWG for power, 22AWG for Balance Plug

    2 in stock

    $8.99

  • Last stock! PN Racing XT60 Plug 3xJST-PH Parallel Charging Cable

    PN Racing XT60 Plug 3xJST-PH Parallel Charging Cable

    2 in stock

    For GLA, Atomic AMZ/BZ and Jomurema Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect XT60 plug to chargers, and the charger's balance board. On the battery side, we have provided 3 x JST-PH connectors so that you can charge/discharge up to 3 packs at the same time. Charge one battery is fine, if you charge 3 batteries together, make sure all batteries is same type and capacity.Total length 18cm, protected by PE wrapHigh quality Silicon wire 14AWG for power, 22AWG for Balance Plug

    2 in stock

    $8.99

  • Last stock! ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek) ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek)

    ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek)

    2 in stock

    This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.Features: 19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) 3mm thick arm 27.25mm Overall length Linkage holes threaded for 3mm hardware 25T Spline Futaba/Orion/Savox/ProTek Output Shaft Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands.

    2 in stock

    $7.79

  • PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 3 (White) PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 3 (White)

    PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 3 (White)

    3 in stock

    This is special make by Machine Cutting 19mm diameter with Front offsetSide wall with small cut groove, make the traction with the tire and wheel Material : Delrin Color: White

    3 in stock

    $6.99

  • PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 1 (White) PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 1 (White)

    PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 1 (White)

    3 in stock

    This is special make by Machine Cutting 19mm diameter with Front offsetSide wall with small cut groove, make the traction with the tire and wheel Material : Delrin Color: White

    3 in stock

    $6.99

  • Last stock! PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 0 (White) PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 0 (White)

    PN Racing Mini-Z 2WD Machine Cut Delrin 19mm Wheel Front 0 (White)

    2 in stock

    This is special make by Machine Cutting 19mm diameter with Front offsetSide wall with small cut groove, make the traction with the tire and wheel Material : Delrin Color: White

    2 in stock

    $6.99

  • PN Racing Mini Car Foam Stand PN Racing Mini Car Foam Stand

    PN Racing Mini Car Foam Stand

    17 in stock

    Mini car foam stand, front to rear support whole ca, and also fit on our MR02 set up board, to cover all the pin.Comes in Orange, Blue, or Black.

    17 in stock

    $6.99

  • PN Racing Mini-Z KS Compound Tire Series PN Racing Mini-Z KS Compound Tire Series

    PN Racing Mini-Z KS Compound Tire Series

    This is brand new develop Mini-Z tire call KS Compound, much more grip and long life. All new KS Compound tire with PNR and KS logo at the sidewall. All new KS Compound Series KS1030 Slick Front Tire SUPER SOFT KS1034 Slick Front Tire SOFT KS1038 Slick Front Tire MEDIUM KS1042 Slick Front Tire FIRM KS2020 Slick Rear Tire SUPER SOFT KS2024 Slick Rear Tire SOFT KS2028 Slick Rear Tire MEDIUM KS2820 Radial Rear Tire SUPER SOFT KS2824 Radial Rear Tire SOFT KS2828 Radial Rear Tire MEDIUM KS4820 14mm Radial Rear Tire SUPER SOFT KS4824 14mm Radial Rear Tire SOFT KS4828 14mm Radial Rear Tire MEDIUM

Kyosho

Login

Forgot your password?

Don't have an account yet?
Create account