Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

The XRAY XB4 2025 Composite Rear Lower Right Suspension Arm is precision-molded from graphite composite material for the ideal balance of durability and flex. Featuring a 3-hole shock mounting design, this arm allows fine tuning of rear suspension geometry for different track conditions. Engineered for maximum performance on high-grip surfaces, the updated design increases stability, consistency, and cornering response. Features: Genuine XRAY factory part for the XB4 2025 Molded from graphite composite for strength and controlled flex 3-hole shock mounting for suspension adjustability Right-side rear arm replacement Designed for high-grip track conditions Includes:(1) Composite Rear Lower Right Suspension Arm – Graphite (3-Hole) Compatibility: XRAY XB4 2025 May also fit earlier XB4 models (verify with setup/parts list)    

Read more less

Keep your suspension tight and precise with the XRAY Suspension Pivot Pins. Manufactured from premium hardened steel, these pins are designed for maximum strength and long life while maintaining smooth suspension movement. Features: Precision-ground hardened steel construction Ensures smooth, slop-free suspension arm movement Designed to withstand the demands of racing Easy drop-in replacement part Includes: (2) Suspension Pivot Pins Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY vehicles using this pivot pin size (check manual for exact fit)

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less

Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Front Lower Arm Mount (0°). Precision-machined from Swiss 7075 T6 aluminum and finished in sleek black coating, this mount provides rock-solid suspension geometry and long-lasting durability for competitive racing. Features: CNC-machined from premium Swiss 7075 T6 aluminum 0° geometry for precise suspension setup Increases consistency and stability in all conditions Black coated for a factory-team look and added wear protection Direct fit replacement part Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (1) Aluminum Front Lower Arm Mount 0°  

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

The XRAY XB4 Composite Front Low Profile Bumper is a genuine replacement part designed for durability and protection on the track. Molded from high-quality composite material, this bumper absorbs impacts while maintaining a low-profile shape that complements the XB4’s aerodynamics. About the BumperThis bumper is engineered to provide just the right amount of flex and protection without adding unnecessary weight. Its low-profile design reduces interference with track surfaces and maintains consistent handling, making it a dependable choice for racers. Features: Precision-molded composite construction Low-profile design for reduced drag and clearance issues Protects front suspension and chassis from impacts Lightweight yet durable Includes:(1) Composite Front Low Profile Bumper Compatibility: XRAY XB4 1/10 4WD Buggy (all versions, check model year manual for direct fitment)    

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY XB4 2025 Composite Rear Lower Left Suspension Arm (Hard) is built from a stiff composite blend to maximize durability and precision. With its 3-hole shock mounting layout, this left-side arm offers multiple tuning positions while the hard material minimizes flex. Perfect for smooth, high-grip surfaces where consistency and sharp handling response are critical. Features: Factory XRAY part for the XB4 2025 Hard composite material for reduced flex and added strength 3-hole shock mount design for advanced suspension tuning Left-side rear suspension arm replacement Engineered for precision handling in demanding race conditions Includes:(1) Composite Rear Lower Left Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit select earlier XB4 models (verify with manual/parts list)

Read more less

The XRAY XB4 2025 Composite Rear Lower Right Suspension Arm (Hard) is molded from a stiffer composite blend to deliver maximum precision and durability. Featuring a 3-hole shock mounting design, this arm gives racers tuning flexibility while reducing unwanted flex in high-bite conditions. The harder material increases cornering consistency and improves handling response on smooth, high-grip tracks. Features: Genuine XRAY factory part for the XB4 2025 Molded from hard composite material for reduced flex 3-hole shock mounting for fine-tuned suspension geometry Right-side rear arm replacement Optimized for high-grip or smooth racing surfaces Includes:(1) Composite Rear Lower Right Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit earlier XB4 models (check manual/parts list)  

Read more less

The XRAY XB4 2022 Composite Battery Clamp Set is a direct replacement designed to securely hold your battery in place during the most demanding race conditions. Molded from durable composite material, these clamps offer a lightweight and reliable solution while maintaining the factory fit and finish. Features: Precision-molded composite construction Lightweight and durable design Direct fit replacement for the XRAY XB4 2022 Ensures secure battery retention under racing stress Includes:(2) Composite Battery Clamps        

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Smoother Rotation. Faster Corner Speed. Upgrade your XRAY X4 with the 58mm ECS BB Drive Shaft Set, engineered for maximum efficiency and precision handling. Featuring a ball-bearing inner assembly, this advanced driveshaft dramatically reduces friction for smoother steering response and improved corner speed — giving you the ultimate edge on the track. Precision Engineering by XRAY Built for professional performance, the ECS BB (Ball-Bearing) design minimizes joint wear, delivers more consistent power transfer, and enhances overall drivetrain smoothness. Ideal for competitive touring racers seeking razor-sharp control and acceleration through every turn. Features: Ball-bearing inner assembly for ultra-smooth rotation Reduces friction for faster cornering and improved stability Increases drivetrain efficiency and steering precision Durable, high-quality materials for long-lasting performance Genuine XRAY Factory Team upgrade Includes: (1) 58mm ECS BB Drive Shaft Set (unassembled) Note: Must be used with XRAY Gear Differential BB CVD Outdrives (XRA304972) – sold separately Compatibility: XRAY X4 XRAY — The Art of Performance.    

Read more less

Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Secure your batteries with confidence using the XRAY Composite LiPo Battery Holder – Long. Precision-molded from premium XRAY composite, these holders are lightweight yet durable, ensuring a snug fit and reliable hold during even the most aggressive racing. The long version is designed for extended-size LiPo packs, offering proper alignment and security in your chassis layout. Features: Includes 2 front & 2 rear holders Long design for extended-size LiPo battery packs Molded from high-quality XRAY composite material Keeps batteries secure under high loads and impacts Lightweight and easy to install Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, long battery layout) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, long battery layout) XRAY XB4 – 1/10 4WD Buggy (check manual for pack fitment) Part Number: 326176-L      

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

Upgrade your XRAY XB4 with the 2025 Carbon Fiber Rear Shock Tower designed for the HS (High Strength) bulkhead. Featuring a 3-dot configuration, this tower is precision CNC-machined from premium carbon fiber to deliver the perfect balance of strength and low weight. Optimized geometry improves suspension performance, durability, and consistency, giving you an edge on today’s demanding tracks. Features: Genuine XRAY factory part for the XB4 2025 CNC-machined from premium carbon fiber 3-dot shock position design for precise tuning Lightweight yet highly durable construction Direct replacement for the stock shock tower Designed for use with HS bulkhead Includes:(1) Carbon Fiber Rear Shock Tower (HS Bulkhead) – 3 Dots Compatibility: XRAY XB4 2025 (with HS Bulkhead) May fit earlier XB4 models when converted with HS bulkhead system    

Read more less

The XRAY Open Eccentric Bushing Set is a precision tuning option that allows racers to adjust suspension geometry with ease. The open design makes it simple to swap and rotate bushings without disassembling major components, saving valuable time during trackside adjustments. About the BushingsCrafted from premium composite material, these bushings provide reliable strength and long-lasting performance. By rotating the eccentric inserts, you can fine-tune roll centers and suspension angles for optimized handling on any surface. Features: Open design for quick installation and adjustments Strong composite construction for durability under racing stress Allows fine suspension and roll center tuning Lightweight and consistent fit Includes:(2) Open Eccentric Bushings Compatibility: XRAY XB4 XRAY XT4 XRAY XB2(fits models using eccentric bushings for suspension/diff height adjustments – confirm fit with your manual)

Read more less

The XRAY Graphite Composite Steering Block is a high-strength upgrade designed to improve steering precision and durability on your XB4 buggy. Constructed from graphite-reinforced composite, it reduces flex while keeping weight low — giving you sharper, more predictable control in every corner. About the Steering BlockWith an optimized geometry for smoother Ackermann response and consistent steering feel, this steering block is ideal for today’s high-grip racing conditions. Its tough composite material ensures reliability through hard impacts and long race days. Features: Graphite-reinforced composite construction for maximum rigidity Optimized geometry for precise steering response Lightweight and durable race-proven design Direct replacement for the stock steering block Includes:(1) Graphite Composite Steering Block Compatibility: XRAY XB4 1/10 4WD Buggy (2022+ models, check manual for fit)

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY XB2 Differential Gasket Set includes four precision-cut gaskets designed for use in the XB2 gear differential. These gaskets provide a tight, consistent seal to prevent oil leakage and ensure smooth, reliable diff performance. Perfect for rebuilds or routine maintenance, they help extend the life of your differential while maintaining peak performance. Features: Precision-cut gaskets for perfect sealing Prevents oil leaks and maintains smooth diff action Durable material for long-lasting reliability Essential for rebuilds and maintenance Designed for XRAY XB2 vehicles Includes:(4) Differential Gaskets    

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

The XRAY Composite Shock Bushing & Shim Set is a replacement hardware set designed to ensure smooth and precise shock mounting on XRAY vehicles. Manufactured from durable composite material, these bushings provide a secure fit while allowing the suspension to move freely and consistently. The included shims allow racers to fine-tune shock positioning and remove unwanted play, helping maintain consistent suspension performance during demanding race conditions. 🔧 Features:• Genuine XRAY replacement shock hardware• Durable composite bushings for reliable performance• Helps maintain smooth and precise shock movement• Includes shims for proper spacing and adjustment• Ideal for maintenance and suspension tuning 📦 Includes:• (2) Composite Shock Bushings• (2) Shock Shims ⚙️ Specifications:• Part Number: 358043• Material: Composite• Application: Shock mounting hardware    

Read more less

Upgrade your differential performance with the XRAY 2.4mm Carbide Differential Balls. Designed for use in the XRAY M18 1/18 scale touring car, these optional carbide balls provide smoother differential operation and improved durability compared to standard steel diff balls. Manufactured from ultra-hard carbide material, these balls are over 15HRc harder than standard differential washers, helping them maintain their perfectly round shape over time. This increased hardness results in smoother diff action, improved consistency, and longer-lasting drivetrain performance. 🔧 Features:• Precision 2.4mm carbide differential balls• Smoother differential operation compared to standard steel balls• Extremely hard carbide material maintains perfectly round shape• Increased durability and consistent drivetrain performance• Ideal upgrade for ball differential systems 📦 Includes:• (12) XRAY 2.4mm Carbide Differential Balls ⚙️ Specifications:• Diameter: 2.4mm• Application: Ball Differential  

Read more less

The XRAY XB4 2022 Carpet Outdrive Adapter with One-Way Bearing is a replacement drivetrain component designed specifically for the XRAY XB4 2022 Carpet buggy. Built from durable HUDY Spring Steel, this outdrive adapter delivers excellent strength and long-lasting performance under demanding race conditions. Featuring a pressed-in one-way bearing, this component provides smooth and reliable operation while simplifying installation and maintenance. Designed for precision fit and durability, it helps maintain consistent drivetrain performance during competitive racing. 🔧 Features:• Designed for the XRAY XB4 2022 Carpet buggy• Manufactured from HUDY Spring Steel for durability• Integrated one-way bearing for smooth operation• Precision fit for reliable drivetrain performance• High-quality construction for racing conditions 📦 Includes:• (1) XRAY XB4 2022 Carpet Outdrive Adapter w/One-Way Bearing ⚙️ Specifications:• Vehicle Compatibility: XRAY XB4 2022 Carpet• Part Type: Outdrive Adapter• Material: HUDY Spring Steel  

Read more less

Improve stability and traction with the XRAY Lush Rear Buggy Wing, designed for 1/10 scale buggies. This redesigned wing provides increased downforce with reduced drag, helping improve rear grip and overall handling while maintaining smooth and predictable jumping characteristics. The aerodynamic shape helps keep the buggy planted through high-speed sections and corners while maintaining the balanced flight control racers expect when attacking jumps. 🔧 Features:• Redesigned Lush wing profile for improved performance• Increased downforce with reduced aerodynamic drag• Enhances rear traction and high-speed stability• Maintains predictable jumping characteristics• Clear wing allows custom paint schemes 📦 Includes:• (1) XRAY Lush Rear Buggy Wing (Clear, Uncut) ⚙️ Specifications:• Application: 1/10 Buggy• Material: Clear polycarbonate• Condition: Clear and uncut The XRAY Lush rear wing delivers improved traction and aerodynamic efficiency, giving racers the confidence to push harder through corners and maintain control over jumps.      

Read more less