The Team Associated SR10 RTR Brushless Dirt Oval Car is ready to take to the track for tire-scorching racing action on dirt, clay and pavement. This combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751).
The SR10 Dirt Oval Race Car is based on the 9-time ROAR Short Course National Championship winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear digital high-torque servo and a water-resistant enclosed receiver box. All of this packaged together in an outstanding factory-finished body with integrated rear spoiler. This SR10 beast will keep you cornering with the included high-grip street stock-inspired treaded tires and lightweight wheels.
Features:
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
Lightweight street stock-inspired wheels
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available!
Metric hardware throughout
22 precision rubber-sealed ball bearings
ASC70030C LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug
Specifications:
Scale: 1/10
Power: Electric
Length: 536.4mm (21.12in)
Width: 250mm (9.84mm)
Weight: 1424g (3.14lbs)
Wheelbase: 277.8mm (10.94in)
Transmission Ratio: 2:6:1
Includes:
(1) SR10 RTR Brushless Dirt Oval Car Kit
(1) 2.4GHz Radio & DVC
(1) Reedy Compact Balance Charger
(1) Reedy 7.4V LiPo Battery with T-plug
Needed to Complete:
(4) AA batteries for transmitter
Team Associated RC10T6.4 Electric 2WD Team Stadium Truck Kit
Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit. Based on the legendary successful RC106.2 Stadium truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs. The RC10T6.4 shares key components with the RC10SC6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ballstud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles. With so many more features, tuning options and upgrades, we can all agree that the RC10T6.4 is an ultimate kit option for all the competitive racers seeking high performance and quality!
NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Updated Features:
13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
13mm machined shock pistons
Updated front ballstud mount and top plate with an angled steering system for improved steering consistency
Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability
Updated rear suspension with wider C and D mounts from the RC10B6.4 series
Updated longer 92.5mm CVA driveshafts for more rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
Updated chassis side rails with the RC10B6.4 fan mount system
Updated aluminum chassis length with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface
(20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options
B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles
Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias
Factory Team RC10B6.4 11g aluminum ESC tray
Specifications:
Scale: 1/10
Type: Stadium Truck
Drivetrain: 2WD
Surface: Off-Road
Power Plant: Electric
Completion level: Unassembled
Length: Varies
Width: Varies
Height: Varies
Wheelbase: Varies
Includes:
(1) Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit
Needed to Complete:
(1) Steering servo
(1) 2-channel transmitter & receiver
(1) 1:10 scale 540-size electric motor & ESC
(1) 2S LiPo battery
(1) Polycarbonate Stadium Truck body
Paint for polycarbonate body
Wheels & Tires
Assembly Tools & Tires CA glue
Team Associated RC10SC6.4 Electric 2WD SC Team Truck Kit
Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit. Based on the legendary successful RC10SC6.2 Short Course truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs. The RC10SC6.4 shares key components with the RC10T6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ballstud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles. With so many more features, tuning options and upgrades, we can all agree that the RC10SC6.4 is the ultimate kit option for all the competitive racers seeking high performance and quality!
NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Updated Features:
13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
13mm machined shock pistons
Updated front ballstud mount and top plate with an angled steering system for improved steering consistency
Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability
Updated rear suspension with wider C and D mounts from the RC10B6.4 series
Updated longer 92.5mm CVA driveshafts for more rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
Updated chassis side rails with the RC10B6.4 fan mount system
Updated short course truck length aluminum chassis with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface
(20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options
B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles
Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias
Factory Team RC10B6.4 11g aluminum ESC tray
Specifications:
Scale: 1/10
Power Plant: Electric
Length: Varies
Width: Varies
Height: Varies
Wheelbase: 325mm (8.86in)
Gear Ratio: 2.6:1
Drivetrain: 2WD
Surface: Off-Road
Completion level: Unassembled
Includes:
(1) Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit
Needed to Complete:
(1) Steering servo
(1) 2-channel transmitter & receiver
(1) 1:10 scale 540-size electric motor & ESC
(1) 2S LiPo battery
(1) Polycarbonate SC Truck body
Paint for polycarbonate body
Wheels & Tires
Assembly Tools & Tires CA glue
The Team Associated RC10B74.2 Team 1/10 4WD Off-Road Electric Buggy Kit has been designed to reduce weight, lower the center of gravity and improve jump and bump handling. Building on every iteration of the RC10 platform, the B74.2 allows for higher stability and better predictability.The RC10B74.2 and RC10B74.2D introduce molded gearboxes front and rear, which lower the center of gravity by removing weight from high points of the car. The modified differentials improve rolling speed through turns and increase stability on landings, allowing the buggy to corner faster on higher-grip carpet and clay tracks. The latest 13mm big bore shock technology from Team Associated is included, taking the RC10B74.2 to the next level in jump and bump handling performance. The introduction of gull wing front suspension arms and the inclusion of the LTC gear sets for the differentials make the RC10B74.2 platform easier and more predictable to drive on any track condition.
NOTE: Finished kit shown in photos is for illustrative purposes only. See the Needed to Complete list below for a full list of items required to complete the model.Features:
Lightweight molded gearboxes both front and rear
Two fixed height front gearboxes allowing for +0 and +2mm differential height options
One rear gearbox with RC10B6-style inserts allowing 0, +1, +2, and +3mm differential height options
13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
Gull wing front suspension arms and mating shock tower for a lower center of gravity and better steering predictability
LTC differential gear sets are included. That reduces binding under power, giving a more predictable power delivery
The battery hold-down system uses inserts to adjust weight bias. O-ring style battery strap with pull tabs
Larger 3.5mm turnbuckles with updated rod end style ballcups to increase durability and reduce bind in the suspension
Center bulkhead fan mount that mounts the fan above the motor for better cooling performance
-2mm wing mounts for use with slicks and low-profile carpet tires to further lower the center of gravity
+3mm aluminum steering rack for optimized bump steer at low ride heights
66mm Rear CVA drive shafts and axles for more on-power traction and a more predictable driving feel
2-pad high-load, high-capacity center slipper clutch with LCF pad material
Specifications:Scale: 1/10Drive: 4WDLength: 395mm (15.55in)Width: VariesWheelbase: VariesWeight: VariesInternal Gear Ratio: 2.50:1Assembly Level: KitNeeded to Complete:
1:10 scale electric motor
Electronic speed control
7.4V-7.6V 2S LiPo with shorty battery dimensions (standard or low-profile height)
Battery charger (suited for battery chosen above)
2-channel surface transmitter
2-channel receiver
Steering servo
Lexan(TM) specific spray paint for body
1:10 scale off-road wheels and tires
Team Associated RC10B6.4D Team Buggy Kit - 2WD Dirt Track Dominator
The Team Associated RC10B6.4D Team Kit continues the AE trend of creating kits specific to the surfaces they are being raced on. The B6.4D includes next generation 13mm diameter big-bore shocks and springs to provide the ultimate in damping and stability. The larger diameter shocks reduce pressure inside the shock and minimize the effects of the shaft displacement. This allows the buggy to feel like it's riding on an invisible cloud when you hit harsh jumps and landings. The chassis, front end, and steering system is optimized for running reduced caster and kickup, which excels on high speed, high grip surfaces. An updated steering system with adjustable height bellcranks helps racers minimize bump steer. In addition, the front suspension is equipped with -1mm kingpin offset steering and caster blocks for smooth and predictable front end feel through the entire throw. The -1mm design pushes the steering pivot closer the center of the front tire, keeping the front end flat through the entire steering throw.
The RC10B6.4D Team Kit includes a dirt-length 19mm Octalock LCF slipper clutch setup, aluminum ESC weight, layback gearbox, and an optimized dirt kit setup. An updated chassis layout and ESC weights allow forward mounted electronics closer to the servo, as well as additional forward battery placement over the previous model. These weight tuning options allow for more high-speed stability and on-power steering.
Both carpet and dirt cars share many great features, such as an easy-access rear differential, wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones, and updated carbon fiber shock towers with molded protective covers. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. The setups and tuning parts remain interchangeable between the RC10B6.4 and the RC10B6.4D configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
Dirt length aluminum chassis with 22.5deg. kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface
20deg, 22.5deg, and 25deg molded bulkheads included for a complete range of caster and kickup options
Adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
-1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
Front ballstud mount, top plate, and front wing mount to account for the kickup angle change
Chassis side rails with three fan mount locations to choose from depending on chassis length and transmission used
Caged thrust bearing for ball differential
Cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit
Length: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Internal Gear Ratio: 2.60:1
Drive: 2WD
Needed to Complete:
1:10 scale electric motor and electronic speed control
7.4V-7.6V 2S LiPo with "shorty" battery dimensions
Battery charger
2-channel surface transmitter, 2-channel receiver, and steering servo
Polycarbonate specific spray paint for body
1:10 scale off-road wheels and tires
AA batteries
Tools & Silicone Fluids
The Team Associated RC8B4e Team 1/8 4WD Off-Road Electric Buggy Kit is designed to push the limits of off road racing. This buggy has been given a huge overhaul and features updated battery configurations, front upper and lower arm design, rear arm design, chassis braces and rear hub design for peak performance. The front-end geometry has also received updates allowing for increased stability and more consistent steering through the entire steering throw. All of these features come together for a buggy that is ready to dominate the track.
Battery ConfigurationsThis chassis can be configured to two battery configurations.
Configuration 1: Two 2s shorty "saddle pack" batteries are used for the lowest CG and exceptional weight bias
Configuration 2: One 4s shorty for simplified setup and more centralized weight bias over a traditional full length 4s battery
Front Suspension Arms
The front upper and lower suspension arms have been designed to accommodate a wide range of flex and stiffness options. Optional inserts have been made to provide extreme fine tuning and will work with the upper or lower arm. The lower arm features a one-piece anti-roll bar link mounts that are in-line with the anti-roll bar for simplified assembly and operation.
Rear Suspension Arms
The rear arms have been designed for optimum flex and stiffness with no inserts. However, optional inserts may be used for fine tuning. The rear arms also feature a one-piece anti-roll bar link is mounted in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Team Associated RC8B4 and RC8B4e
Features:
Updated front and rear suspension arms
Updated battery configurations
Rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape, and extra clearance for shock position adjustment
Rear wing has more vertical fins for increased straight-line stability, a taller rear wickerbill height for increased downforce, increased strength in various areas to reduce bending fatigue, and dimples on the backside as a template for cutout holes
Rear chassis brace has several design features and flex options
+1mm offset rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning
Specifications:
Scale Size: 1:8 Scale
Terrain: Off-Road
Body Style: Buggy
Drive: 4WD
Length: 486mm (19.13in)
Width: 304.5mm (11.99in)
Wheelbase: varies
Weight: varies
Power Source: Electric
Assembly Level: Kit
Includes:
(1) RC8B4 Off-Road Electric Buggy Kit
Needed to Complete:
(1) 2-channel radio/transmitter
(1) 1:8 scale speed control
(1) 1:8 scale motor, and pinion (see motor manufacturer's gearing recommendations for correct pinion size)
(1) High-torque steering servo
(1) 4S LiPo battery or (2) 2S LiPo shorty "saddle pack" batteries
(1) Compatible charger
(4) 1:8 scale buggy tires & wheels
CA (Cyanoacrylate) glue
Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
Thread-locking compound
Tools
Silicone Shock & Diff Fluid
Transmitter batteries
Team Associated Apex2 ST550 Sport RTR 4WD Rally Car Combo
Team Associated Apex2 ST550 Sport RTR 1/10 Electric 4WD Rally Touring Car. Built on the proven and budget-friendly Apex2 Sport chassis, the ST550 includes some of the latest features in racing. A front and rear independent suspension with coil-over shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac, which makes it a perfect platform for the (Super Touring) race class!
Although this ST550 is built on a budget chassis, it is still a great performer that can be an all out racing platform! Features a redesigned chassis layout that accepts shorty and stick packs, sealed center driveline for smooth and reliable power delivery, sealed front and rear gear differentials, steel dog bones and drive axles, front and rear independent suspension for superior control, coil-over smooth shock absorbers, an aluminum motor plate and adjustable shock mounting and body post height locations!
Team Associated Apex2 Sport ST550
Features:
Fully assembled, painted and ready-to-run
Redesigned chassis layout that accepts shorty and stick packs
Reedy powerful and waterproof SC500X brushed ESC and 550 15-Tunrn 3-Slot brushed motor
Sealed center driveline for a smooth and reliable power delivery
Sealed front and rear gear differentials
Steel dog bones and drive axles
Adjustable rear suspension allows you to increase or decrease rear grip
Front and rear independent suspension for supreme control
Coil-over smooth shock absorbers
Aluminum motor plate
Adjustable shock mounting locations
Molded one-piece tie rods and steering links
Adjustable body post height locations
POM-filled injection-molded pivot balls
Injection molded brake calipers and rotors provide a sporty scale look
Injection molded spoiler and accessories
Race inspired radial tires mounted on 1.9" white turbine-style wheels
Specifications:
Scale: 1/10
Power Plant: Electric
Length: 18.03in (458mm)
Width: 7.48in (190mm)
Wheelbase: 10.2in (259mm)
Weight: Varies
Gear Ratio: 2.6:1
Drivetrain: 4WD
Completion Level: RTR
Includes:
(1) Apex2 ST550 Sport RTR 1/10 Electric 4WD Rally Touring Car
(1) XP120 2.4GHz Transmitter and Receiver
(1) Reedy WolfPack LiPo 3000mAh 30C 7.4V Shorty w/T-plug
(1) Reedy 324-S Compact Balance Charger
Needed to Complete:
(4) AA batteries for transmitter
Team Associated Apex2 Datsun 620 Electric 4WD Touring Truck
Team Associated Apex2 Datsun 620 Sport RTR 1/10 Electric 4WD Touring Truck. Built on the proven and budget-friendly Apex2 Sport chassis, the Datsun 620 includes some of the latest features in racing. A front and rear independent suspension with coil-over shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac, which makes it a perfect platform for your everyday hooning!
This Datsun 620 is a built 1970s budget truck that has been in car culture for over 50 years and will be around for 50 more. This stunning chassis was designed and painted to be an all out hooligan! Featuring Wilwood calipers and slotted brake rotors paired with a redesigned chassis layout that accepts shorty and stick packs, sealed center driveline for smooth and reliable power delivery, sealed front and rear differentials, steel dog bones and drive axles, front and rear independent suspension for superior control, coil-over smooth shock absorbers, an aluminum motor plate, and adjustable shock mounting and body post height locations!
Features:
Fully assembled, painted and ready-to-run
Redesigned chassis layout that accepts shorty and stick packs
Reedy powerful and waterproof SC500X brushed ESC and 550 15-Turn 3-Slot brushed motor
Sealed center driveline for a smooth and reliable power delivery
Sealed front and rear gear differentials
Steel dog bones and drive axles
Adjustable rear suspension allows you to increase or decrease rear grip
Front and rear independent suspension for supreme control
Coil-over smooth shock absorbers
Aluminum motor plate
Adjustable shock mounting locations
Molded one-piece tie rods and steering links
Adjustable body post height locations
POM-filled injection-molded pivot balls
Wilwood brake calipers and Slotted rotors provide insane scale stopping capabilities
Injection molded duckbill spoiler and accessories
Radial tires mounted on 1.9" Bronze turbine-style wheels
Specifications:
Scale: 1/10
Power Plant: Electric
Length: 18.03in (458mm)
Width: 7.48in (190mm)
Wheelbase: 10.2in (259mm)
Weight: Varies
Gear Ratio: 2.6:1
Drivetrain: 4WD
Completion Level: RTR
Includes:
(1) Apex2 Datsun 620 Sport RTR 1/10 Electric 4WD Touring Truck
(1) XP120 2.4GHz Transmitter and receiver
(1) Reedy WolfPack LiPo 3000mAh 30C 7.4V Shorty w/T-plug
(1) Reedy 324-S Compact Balance Charger
Needed to Complete:
(4) AA batteries for transmitter
Team Associated Factory Team FOX Kashima Coated Shock Body Kit. This kit is an optional upgrade intended for the B6.4 and B6.4D buggies. Featuring genuine FOX Kashima coating these shock bodies offer silky smooth, long lasting operation and give your ride the Factory Team look! Additionally included are some fresh shock shafts and seals to give you optimum sealing and a truly supple feeling shock setup. Includes:
(2) FOX Kashima Coated Front Shock Bodies
(2) FOX Kashima Coated Rear Shock Bodies
(2) Front Shock Shafts
(2) Rear Shock Shafts
(4) Shock Seals and Bushings with Hardware
COMPATIBILITY:
Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
Team Associated RC10B6.4 Chassis. This replacement chassis is intended for the Team Associated B6.4. Package includes one aluminum chassis plate.
COMPATIBILITY:
Team Associated RC10B6.4Team Associated RC10B6.4D
