The ProTek R/C 2S 130C Graphene + HV 4200mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 170 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage.This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike.Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best.Features:
Lighter than a hardcase 2S LiPo pack of equal capacity
More runtime, with a dramatic increase in voltage and punch
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Increased run time, increased cycle life and increased voltage!
More capacity gram for gram when compared to standard LiPo cells
Perfect for stock class racers looking to shave grams
10C max charge rates - 1C charge rate recommended for longest life
7.6V nominal voltage
5mm bullets and 5mm to 4mm bullet adapters included
NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack.
Battery Model
2S HV LiPo
ROAR Approved
Yes
Type
Silicon Graphene
Voltage
7.6V
Capacity @7.4V
4200mAh
Capacity @7.6V
4800mAh
Weight
170g
Connector Type
5mm Bullet
Balance Connector
2mm Bullet
Number of Cells
2 Cell
Configuration
2S1P
Dimensions (WxLxH)
47x96x20mm
Maximum Charge Rate
10C (48A)
Burst Current
130C
Watt Hour @7.6V
36.5 Wh
Includes:
(1) ProTek R/C Battery
(2) 5mm to 4mm Bullet Reducers
(2) 5mm Bullet Connectors
(1) 2mm Balance Bullet Connector
LITHIUM POLYMER SAFETY INFORMATION
IMPORTANT:1) DO NOT leave the battery in your model when charging2) DO NOT leave unattended when charging3) ALWAYS balance charge the battery4) ALWAYS use a LiPo charging bag5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)6) YOU MUST not over discharge the Li-Poly battery pack7) READ & UNDERSTAND the instructions carefully before operating this batteryNOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This is the ProTek R/C Universal Radio Case. Everybody loves getting a new radio system. What everyone would love to avoid is the additional cost of a new radio case to protect that fancy new radio. So the minds behind ProTek R/C have developed an all in one solution that will allow you to use a single radio case to protect your current transmitter, with the flexibility to protect the transmitters you buy in the future!The case itself features a tough aluminum shell, with reinforced corners, locking latches and a high density foam lined interior, all in an effort to withstand the potential punishment and abuse that occurs during transportation. But what makes this case unique is the replaceable high density foam inserts* that allow the case to accommodate a variety of transmitters on the market! This includes Airtronics, Spektrum, KO Propo, Futaba and JR! Simply purchase the foam insert that fits your transmitter, and use the same case over and over. ProTek R/C has developed another unique and incredibly flexible product that will keep your gear safe, and has the potential to be one of the best storage investments you can make.
The ProTek RC 1/10 Buggy Tire Bag is a convenient way to haul and preserve your tires, as well as anything else that fits inside one of six included, airtight 6.5" tall, 3.5" diameter screw on lid storage tubes. The bag itself is made from heavy duty nylon material and measures 12.75" wide, 8.25"deep and 7.5" tall. The lid of the bag features a large ProTek RC logo in white, and has a 12x7.5" mesh zippered pocket on the inside providing a place to stash setup sheets, tools or other small accessories that may come in handy at the track. If you are serious about keeping your gear neat and tidy, this bag is a must have accessory.
Features:
Perfect for 1/10 Buggy and On Road
Six airtight 6.5" tall, 3.5" diameter PET tubes with screw on lid
Heavy duty nylon material
Bag measures 12.75" wide, 8.25"deep and 7.5" tall
Internal 12x7.5" mesh zippered pocket
This is the ProTek R/C LiFe Car Transmitter Battery Pack, and is intended for use with the Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX, 16SZ, and 18SZ Transmitters. Lithium battery technology is evolving. With cell dimensions that fit anywhere a standard Li-Po battery will and rapidly increasing capacity, LiFe chemistry will soon set the standard that all others are judged by. With the ability to deliver 1000+ usable cycles, and a life span up to 4 times longer than Li-Poly batteries (when cycled under the same discharge conditions), these batteries offer the user an excellent balance of performance and value. LiFe batteries are more durable than Li-Poly and are able to handle a higher level of abuse when compared to Li-Poly without the risk of pre-mature failure. Unlike Li-Poly, LiFe cells can be stored in a fully charged state with little to no loss in stored power, and can be discharged deeper with less risk of damage to the cells. Most importantly, LiFe batteries are SAFE! There is no risk of combustion! LiFe cells will not catch fire or explode when over charged, or after a deep discharge.What about the voltage?A 2 Cell LiFe battery produces 6.6 volts nominal, which is almost a full volt less than a 2 Cell LiPo battery. The LiFe battery is not meant to replace the performance of a Li-Po battery, it is simply another option. LiFe offers the user a battery with a good discharge curve that is better than that of a NiMH battery, but without the risk of damage or fire that exists when a LiPo battery is abused.NOTE: Brand new LiFePO4 batteries have been found to fail prematurely if they are deep discharged below below 33% capacity too early. A break-in period of 20 cycles is currently recommended. While testing has shown that this battery can be charged at up to 3C rates, it is recommended that this battery not be charged at rates higher than 1C to maximize the lifespan of the battery. Additionally, LiFe batteries should not be discharged below 2.5V per cell to avoid pre-mature failure and maximize battery life span.We also recommend you REMOVE the batteries from your cars or radios when you are done, or at least unplug them to avoid accidental over discharge if the unit is left on.IMPORTANT:1) You will need a LiFe specific charger to charge the pack (NiMH, NiCD or Li-Poly only chargers WILL NOT WORK!)2) You must not discharge the LiFe battery pack below 33% capacity during the break in period or below 2.5V per cell after break in.3) It is not recommended that you charge this LiFe battery pack at amp rates higher than 1C.4) Read the instructions carefully before operating this battery.
Features:
Safe chemistry will not explode or catch fire
More mAh per gram compared to NiMH cells, meaning lighter models, and longer runtime
Virtually no "self discharge", so the battery is always ready to go even weeks after charging.
Superior voltage performance under load compared to NiMH cells, with consistent torque and speed.
Fast charge time
Specifications:
Voltage: 6.6V
Capacity: 2100mah
Chemistry: LiFePO4
Balance Charge Plug: XH
Charge Rate: 1C
Discharge Plug: JR/Futaba
Dimension (LxWxH): 76x41x17mm
Weight: 105g
This is the ProTek R/C AE B6.2/B6.3/B6.4 Grade 5 Titanium Turnbuckle Kit. These titanium turnbuckles are CNC machined and thread rolled to near-exact tolerances from high-quality 6AL-4V (Grade 5) titanium alloy material and polished to a brilliant finish. Each turnbuckle is marked with thread directions for easy identification, with standard sized threads on each end for the intended model.
Why Titanium?
Titanium is strong, dense and super lightweight. In fact, Titanium has one of the highest strength-to-density ratios of all the metal compounds, making it the best advantage for dropping weight without sacrificing strength or durability.
6AL-4V Grade 56AL-4V, or more commonly known as Grade 5, is a Titanium alloy mixture composed of 6% aluminum and 4% vanadium. It is significantly stronger than pure titanium but more expensive to manufacture. Grade 5 is the most widely used titanium alloy for its excellent combination of low weight, high strength and corrosion resistance.Features:
CNC Machined Construction
High-Quality 6AL-4V Titanium Alloy
Reduces Overall Vehicle Weight
Fits AE B6.2/B6.3
Upgrade for stock suspension & steering links (servo link not included)
Note: To ease the installation of new ball cups, add a small dab of ProTek R/C "Premier White" Grease (PTK-1412) to the threads of the turnbuckle.
COMPATIBILITY:
Team Associated DR10Team Associated RC10B6.2Team Associated RC10B6.2DTeam Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6.4Team Associated RC10B6.4D
This is the ProTek R/C Aluminum Camber Gauge is a precision machined tool that allows for quick and easy camber checks for everything from 1/10 on road, to 1/8 truggy. Lightweight and easy to use this camber gauge features a laser engraved 117mm scale on the side to measure tire height, as well as a +5 to -12 degree scale for measuring camber. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the gear you need to keep your chassis dialed and race ready.
Features:
Precision machined aluminum
Measures
Laser engraved scale on both sides for easy viewing
Great for 1/10 on road, to 1/8 truggy and everything in between
117mm max tire height
Measure camber from within a +5 to -12 degree range
Official HOBBYWING Pit Mat
Dim: 1200mm x 600mm (47.24in x 23.62in)SKU:HWPMAT-1The HOBBYWING Pit Mat offers unequalled protection for your tabletop or pit bench while working on your vehicles. The rugged leak-resistant with "ultra thin nylon material" is specially compressed and 'foldable'. It is easily to wipe off and clean with normal cleaners. The exclusive non-slip backing helps prevent the Pit Mat from sliding on the tabletop, and the large size allows you to keep your toolbox and spare parts safe from dirt and damage. It is designed in USA, specially catered to R/C professional travellers.
This is a replacement ProTek R/C Metal Servo Gear Set, and is intended for use with the ProTek R/C PTK-160T Low Profile "High Torque" Metal Gear Servos.
How To Change Your RC Servo Gears: AMain Hobbies' RC Talk
Includes:
(1) Gear set
(1) Long pin
(1) Short pin
This is the ProTek R/C Aluminum Chassis Ride Height Gauge. A well tuned chassis can be the difference between making the A Main, and making the podium. Don't let a poorly tuned chassis be the reason why you don't make it on the box! This gauge features a pivoting arm with lock screw, and graduated scale that measure from 3mm to 20mm in 1mm increments. The gauge is machined from aluminum for precision and durability, and the measurements are laser engraved on both sides for easy viewing. Combine this with black anodizing and aluminum beveled edges, and you get a highly functional setup tool that looks as good as it works. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the gear you need to keep your rig ready for action, no matter what.
Features:
Precision machined aluminum
Measures ride height from 3mm to 20mm in 1mm increments
Laser engraved scale on both sides for easy viewing
Great for 1/10 scale on road, off road, and any application that runs from 3mm to 20mm ride height
This is a Reedy 2S-4S XT60 Pro Charge Lead, available in a variety of configurations for most batteries used in popular 1/10 and 1/8 applications. Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional protection and a professional appearance while positive ends are clearly marked to prevent reverse polarity. After selecting the correct cell-count setting, simply connect the main plug and then plug the battery's balance lead into the appropriate balance connector to charge.
Specifications:
Length: 50cm (19 11/16").
This is a ProTek R/C "TruTorque" Metric Power Tool Tip Set, with 1.5, 2.0, 2.5 and 3.0mm tips. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier.Anyone who has used a cordless drill to wrench on their rig knows that when used properly, power tools can provide an incredible advantage. They not only allow you to replace damaged parts faster, but also help to prevent hand fatigue. ProTek R/C "TruTorque" Power Tool Tips are machined from high quality HSS steel for durability and long life. The precision cut tips provide an exceptional fit with the fastener. The 1/4" drive hex ends are designed to fit tools that accept a 1/4" drive hex socket.
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
Features:
Quality tool steel tips
Standard 1/4" drive for compatibility with common power tools
Size is marked on the tip for identification
Specifications:Total Length: 85mmTip Length: 54mmMaterial: HSS SteelIncludes:
(1) 1.5mm 1/4" Drive Power Tool Tip
(1) 2.0mm 1/4" Drive Power Tool Tip
(1) 2.5mm 1/4" Drive Power Tool Tip
(1) 3.0mm 1/4" Drive Power Tool Tip
This is the ProTek R/C "Pick & Pluck" Universal Radio Case Insert. This insert features individually pre-scored squares that will allow you to tailor the ProTek R/C Universal Radio Case to carry more than just a radio! Decide what you want to put in the case, measure out the area that needs to be removed and cut out the squares. Carry your spare motors, batteries & charger, small multi-rotor aircraft, FPV equipment, or even a transmitter that we don't make a specific insert for.
The bi-level design features two 2.5" thick pick & pluck sheets that when layered, allow you to fit multiple items at different depths. This allows larger items to sit deeper within the lower level, while keeping smaller items easy to reach in the upper level. Additionally, if you would like to use this insert with your own case, the foam measures 14x10x5.5”. Customize your Universal Radio Case and protekt your valuable equipment that must be kept secure, with the ProTek R/C Pick & Pluck insert.
This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one black anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.Features:
Clamp design
16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3.5mm thick arm
31mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline ProTek Output Shaft
This is a ProTek R/C "TruTorque" 1.5mm Power Tool Tip. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier.Anyone who has used a cordless drill to wrench on their rig knows that when used properly, power tools can provide an incredible advantage. They not only allow you to replace damaged parts faster, but also help to prevent hand fatigue. ProTek R/C "TruTorque" Power Tool Tips are machined from high quality tool steel for durability and long life. The precision cut tips provide an exceptional fit with the fastener, and feature a bronze colored finish that not only looks good, but also helps to protect the steel from corrosion. The 1/4" drive hex ends are designed to fit tools that accept a 1/4" drive hex socket.
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
Features:
Quality tool steel tip
Standard 1/4" drive for compatibility with common power tools
Size is marked on the tip for identification
Specifications:Total Length: 85mmTip Length: 54mmMaterial: Tool SteelIncludes:
(1) 1.5mm 1/4" Drive Power Tool Tip
This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.Features:
19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3mm thick arm
27.25mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands.
These straight bladed ProTek RC "TruTorque" Lexan Scissors feature a specific blade angle designed specifically for cutting Lexan (Polycarbonate) material. The straight blades are made from Stainless Steel and are effective at precision straight line cutting, as well as light curved work.
For heavy curved cuts use the ProTek R/C Curved Lexan Scissors (PTK-8278).
These curved bladed ProTek RC "TruTorque" Lexan Scissors feature a specific blade angle designed specifically for cutting Lexan (Polycarbonate) material. The curved blades are made from High Quality 420 Stainless Steel and are effective at precision cutting.
For strait line cuts use the ProTek R/C Straight Lexan Scissors (PTK-8278).
ProTek R/C Steel Mod 1 Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any Mod 1 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with the tooth count engraved on the gear for easy identification. Plus, each gear includes a setscrew to make installation easy. Choose the tooth count you need from the pull down menu.
ProTek R/C High Tack Double Sided Tape is a 40" long roll of 1" wide grey double sided tape with an extra aggressive adhesive. This tape is 1.2mm thick and is perfect for securing receivers, ESC's, transponders and much more.
The super tack adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component. Protek RC offers two types of double sided tape, clear and grey. Grey is recommend for cooler weather.
Features:
Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more!
Extra Strong adhesion and durability
Water proof and heat resistant
Reduces vibration
Soft and flexible
Suitable for curved surfaces
Strong tensile strength
ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double side tape that has become a must have for RC use. This tape is 1mil thick and is perfect for securing receivers, ESC's or transponders to your RC car. The adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component. Protek RC offers two types of double sided tape, clear and grey. Clear is recommend for warm weather and is superior on carbon fiber surfaces.
Features:
Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more!
Strong adhesion and durability
Water proof and heat resistant
Reduces vibration
Soft and flexible
Suitable for curved surfaces
Strong tensile strength
This is a Protek 48P Light Weight Aluminum Pinion Gear. These are light-weight, hard anodized, CNC machined aluminum off road pinion gears that allow your motor to spool up quicker and improve acceleration when powering out of the corners.Machined from 7075-T6 aluminum and hard anodized, these precision cut gears are durable and ideal for any 48 pitch application. Plus, the 18 tooth and larger gears have been machined on the back side to remove as much weight as possible, without sacrificing strength. These gears are available in 13 - 38 tooth variants, and the tooth count is engraved on the gear for easy identification. Each gear includes a setscrew to make installation easy. Choose the tooth count you need from the pull down menu above.
Features:
48 Pitch
Choose from 13 to 38 tooth sizes
Hard anodized aluminum
Super light weight design
Etched tooth size for easy identification
Less rotating mass
Quicker motor spool up
COMPATIBILITY:
Kyosho Ultima RB5Kyosho Ultima RB6Kyosho Ultima RB6.6Kyosho Ultima RT5Kyosho Ultima RT6Kyosho Ultima SCKyosho Ultima SC6Losi 22 1.0Losi 22 2.0Losi 22 3.0Losi 22 3.0 SPEC-RacerLosi 22-4 1.0Losi 22SCT 1.0Losi 22SCT 2.0Losi 22SCT 3.0Losi 22T 1.0Losi 22T 2.0Losi 22T 3.0S-Workz S12-1MRSchumacher Cougar KF2Schumacher Cougar KF2 SESchumacher Cougar KRSchumacher Cougar SV2Serpent Spyder SRX-2 MMSerpent Spyder SRX-2 RMSerpent Spyder SRX-2 SCTeam Associated RC10 B4 OriginalTeam Associated RC10 B4.1Team Associated RC10 B4.2Team Associated RC10 B44 OriginalTeam Associated RC10 B44.1Team Associated RC10 B44.2Team Associated RC10 B44.3Team Associated RC10 B5 OriginalTeam Associated RC10 B5MTeam Associated RC10 B5M Factory LiteTeam Associated RC10 SC5MTeam Associated RC10 SC6.1Team Associated RC10 T4 OriginalTeam Associated RC10 T4.1Team Associated RC10 T4.2Team Associated RC10 T4.3Team Associated RC10 T5MTeam Associated RC10 T6.1Team Associated RC10B6 OriginalTeam Associated RC10B6.1Team Associated RC10B6.1DTeam Associated RC10B6.2Team Associated RC10B6.2DTeam Associated RC10B6DTeam Associated SC10 OriginalTeam Associated SC10.2Team Associated SC10.3Team Associated TC7 OriginalTeam Associated TC7.1XRAY XB2 OriginalXRAY XT2 OriginalYokomo B-MAX2 MRYokomo B-MAX2 MR V2Yokomo B-MAX2 MR V3Yokomo B-MAX2 OriginalYokomo YZ-2 CAYokomo YZ-2 CAL2Yokomo YZ-2 CAL3Yokomo YZ-2 DTYokomo YZ-2 DTMYokomo YZ-2 DTM WCYokomo YZ-2 DTM2Yokomo YZ-2 DTM3Yokomo YZ-2 OriginalYokomo YZ-2 TYokomo YZ-4 OriginalYokomo YZ-4 SF
ProTek R/C Steel 32 Pitch Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any 32 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with an included reducer sleeve that will allow use with standard 3.17mm size motor shafts. The tooth count and tooth pitch is engraved on the gear for easy identification, and each gear includes a setscrew to make installation easy. Choose the tooth count you need from the pull down menu above.
ProTek R/C Lightweight Steel 48P Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any 48 pitch application. Plus, the 18 tooth and larger gears have been machined on the back side to remove as much weight as possible, without sacrificing strength. These gears are available in 12-41 tooth variants, and the tooth count is engraved on the gear for easy identification. Each gear includes a setscrew to make installation easy. Choose the tooth count you need from the pull down menu.
This is a Male XT60 to Female EC3 plug adapter from ProTek R/C. This adapter will allow you to use batteries with an XT60 with a vehicle equipped with EC3 or IC3 plug; including vehicles from Losi, Arrma, Axial and more.
Additionally, this adapter will allow you to charge your XT60 batteries on any of the IC3 equipped Smart Chargers from Spektrum.
The ProTek R/C Large Body Clips are heavy duty, chrome plated body clips that are perfect for 1/8 scale size vehicles. Package includes ten body clips.
The ProTek R/C Standard Bent Body Clips are heavy duty, chrome plated body clips that are perfect for 1/10 scale size vehicles. These clips feature a bent end that makes the clip easier to grab. Package includes ten body clips.