JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are designed with radius positioning to enhance the drive on carpet and turf surfaces. The pre-mounted JConcepts tires include open cell, medium inserts for plush control mounted on JCO3348 Mono wheels available in bright white and fluorescent yellow.
The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
Pre-mounted
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Plush open cell inserts included
Mounted on authentic JCO3348 wheels
JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires were developed to enhance the drive on carpet and turf surfaces. The pre-mounted JConcepts tires are assembled with no inserts, mounted on JCO3376 Mono wheels available in bright white or fluorescent yellow.
The Fuzz Bite front tire lands on a super low-profile carcass. The super low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse "water tower" shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated to create a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, increased steering response and the tightness of the package creates a nimble racing vehicle. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also additional mid-corner steering.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on a wheel which lead to a great alignment but now with reduced unsprung weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
Pre-mounted
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Mounted on authentic JCO3376 wheels
This is a set of four JConcepts Mono 12mm Hex 2.2 Rear Wheels, and are intended for use with the Associated B4.1, B44.1 and Kyosho RB5 1/10 buggies. For many years the standard setup on Team Associated 2wd vehicles has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, and JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated B4.1 buggy. With the recent release of the Team Associated’s 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When Team Associated makes an update, JConcepts delivers. The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity. To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies. Features:
Popular dish styling and detail
4 wheels included per package
Available in bright white and fluorescent yellow
Vent holes
Advanced manufacturing process and durable material
Fits Kyosho RB5 and as a direct fit
Fits B4.1, and B44.1 with adapters
The JConcepts Mono 2.2 Slim Front Wheel completes the JC wheel lineup for narrow carpet and Astroturf front tires routinely used around the world. The light-weight, one-piece wheels are precision molded for concentricity, produced in a durable, high-impact material and available in bright white and fluorescent yellow. The internal ribs feature support in all the appropriate areas extending inside to out against the outer bead ring. The centralized hex accommodates a huge selection of 2wd buggy platforms and is shallow enough for a clean install every time. A polished face maintains a clean yet simple look for the racer and an outer glue catch resists excess glue from running down the wheel during the mounting process.The wheels are branded with the JC logo for authenticity and packaged in a group of 4 pieces providing the racer even more bang for the buck.Features:
Slim width for narrow tire applications
Popular dish styling and detail
4 wheels included per package
Available in bright white and fluorescent yellow
Light-weight design with vent holes
Advanced manufacturing process and durable material
Fits B5M, RB6, SRX-2, YZ2, KF2
The JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tire is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
The JConcepts Nessi Carpet 2.2" Rear Buggy Tire shares styling cues from its successful brother, the Lockness. Racing on artificial surfaces require a lot of stability and forward-bite and the design team went to work to substantially improve performance. The new tire brings a new 3D blended pin-size, pin-separation and a light-weight and incredibly low-profile carcass.
Designed in the industry standard 2.2” bead mounting size, the Nessi is very versatile and has shown to work in many natural and artificial conditions. The semi-circle protrusions, unique to the Lockness and now the Nessi are included in the center section of the tire and on the sidewall area. These details are important and the low semi-circles improves side-bite but also minimize grip-rolling instances associated with normal pins.The pink compound marked with 2 pink dots on the tire is a medium soft material with good wear characteristics. The rear tires include open cell inserts making them a complete set ready to mount, straight out of the package.Features:
JConcepts fit, finish and design
3D blended, medium-height pin-size for quick reaction
Semi-circle protrusions for side-bite
Low-profile, wide stance carcass
Incredibly low-profile carcass for rolling speed
Includes, open cell inserts
The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
Pre-mounted
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Mounted on JCO3353 wheels
Pin Swag 2wd Front, Pink Compound, Pre-Mounted on 3376 Wheels, Fits 2wd Buggy Front
Like the name suggests, the Pin Swag tire combines the outer lugs of a JConcepts Swagger front tire with the dense arrangement of specialty pins. Optimized as a 2wd front tire, the pins themselves are round and crisp to the top where they climax to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge giving steering control. Available as pre-mounted, the Pin Swags are assembled and glued on JConcepts 3376 wheels in either bright white or fluorescent yellow colors.The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile carcass like the successful Fuzz Bites rolls through the turns and transitions well at high and low speeds.A unique feature on the Pin Swag and many of the JConcepts carpet | turf racing tires, is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Pre-mounted for convenience
Low profile carcass layout
Pin and Swag combo pin / lug arrangement
Hefty base pin with crisp ends
Dense layout to help minimize wear.
Ultra-light weight scalloped tire beads.
Available in bright white or fluorescent yellow colors
The JConcepts Fuzz Bite Carpet Short Course Tire is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on an SCT carcass carried over from already successful tires in the JConcepts line-up. The SCT stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip. Inside the carcass, heavy sidewall ribs on the outside help support heavy corning, allow to brace against the wheel and built to work in conjunction with included foam inserts.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
SCT profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Internal support ribs built to work with insert and wheel
Ultra-light weight scalloped tire beads
Plush open cell inserts included
The JConcepts Swaggers Carpet 2.2" Truck Tire features ribs with a multitude of heights and angles for cornering speed, consistency and straight-line tracking ability. The Swagger has shown to produce ultra fast lap times while also being easier to drive than other options on the market. The front tires are designed to work best with JConcepts 2.2” truck wheels (JCO3354W or JCO3354Y). The Swaggers work best on Carpet and Astroturf tracks where the racing line requires an aggressive style front tire.The ultra low-profile carcass keeps a truck very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. JConcepts has added side-wall ribs in a circular pattern to the exterior of the tire to support high-grip racing. The pink compound marked with 2 pink dots on the tire is a medium soft material with good wear characteristics. The Swagger front tire includes open cell inserts for the best performance in a variety of conditions. Features:
JConcepts fit, finish and design
Offset, multiple height, angular ribs
Low-profile carcass for increased response
Carefully shaped carcass for rolling speed
JConcepts Swagger 2.2" Pre-Mounted 4WD Front Buggy Carpet Tires feature a multitude of heights and angular ribs for corner speed, consistency and straight-line tracking ability. The Swagger has shown to produce ultra-fast lap times while also being easier to drive than other options on the market.
The ultra-low-profile carcass keeps a 4wd buggy very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. JConcepts has added side-wall ribs in a circular pattern to the exterior of the tire to support high-grip racing. The pink compound marked with 2 pink dots on the tire is a medium soft material with good wear characteristics. The pre-mounted JConcepts tires include open cell, medium inserts for plush control mounted on JCO3353 Mono wheels available in bright white and florescent yellow.
Features:
Pre-mounted
JConcepts fit, finish and design
Offset, multiple height, angular ribs
Low-profile carcass for increased response
Carefully shaped carcass for rolling speed
Mounted on authentic JCO3353 wheels
This is a set of four JConcepts Mono 12mm Hex Wheels, and are intended for use with the Team Associated T4.1 1/10 scale stadium truck equipped with the optional 12mm hex conversion. For many years the standard option on the Team Associated 1/10th truck has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated T4.1 truck. Racers have asked for years for an interchangeable front and rear wheel on the T4 and JConcepts has delivered. With the recent release of the Team Associated 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in white and fluorescent yellow.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the Mono 12mm hex wheel on the T4.1 it requires JConcepts Front Axles (JCI2170), 12mm Clamping Hexes (JCI2081) on the front and rear of the vehicle, and also the Team Associated Front Steering Blocks (ASC9880).
Features:
JConcepts 12mm design and function
Interchangeable front and rear wheel
Popular dish styling and detail
4 wheels included per package
Available in white and fluorescent yellow
Vent holes
Advanced manufacturing process and durable material
COMPATIBILITY:
Team Associated RC10 T4.1
Team Associated RC10 T4.2
Team Associated RC10 T5M
Team Associated RC10 T6.1
Tekno RC ET410
Yokomo YZ-2 T
JConcepts Pin Swag Carpet 2.2" Rear Buggy Tires combine the outer lugs of a JConcepts front tire with the dense arrangement of Pin Down type pins. The pins themselves are round and crisp to the top where they peak out to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge.
The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile carcass rolls through the turns and transitions well at high and low speeds.
A unique feature on the Pin Swag is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Pin and Swag combo pin / lug arrangement
Hefty base pin with crisp ends
Dense layout to help minimize wear
Ultra-light weight scalloped tire beads
Plush open cell inserts included
JConcepts Swaggers Carpet 2.2" 2WD Front Buggy Tires have a multitude of heights and angular ribs for corning speed, consistency and straight-line tracking ability. The Swagger has shown to produce ultra fast lap times while also being easier to drive than other options on the market. The front tires are designed for the narrow “slim” style front wheels which are already available from JConcepts with part numbers JCO3376W or JCO3376Y.The ultra low-profile carcass keeps a 2wd buggy very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. JConcepts has added side-wall ribs in a circular pattern to the exterior of the tire to support high-grip racing. The pink compound marked with 2 pink dots on the tire is a medium soft material with good wear characteristics. Since the Swagger tire is so small in diameter, no insert is necessary for championship level performance.Features:
JConcepts fit, finish and design
Offset, multiple height, angular ribs
Low-profile carcass for increased response
Carefully shaped carcass for rolling speed
Pink Medium Soft compound, developed for carpet and astro tracks
No insert required or included
This is the JConcepts Fuzz Bite Carpet 2.2" Stadium Truck Tire. This is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides a quick transition at high speed and minimizes side wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision.
The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight-knit CRC carpeting. The alternating rows of pins provide side bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity.
The Fuzz Bite incorporates a small radial rib on the outside with an angular cross to give consistent cornering but also a forward mid-corner launch grip. A unique feature of the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight.
Note: During the gluing process, it is also handy to have some breathing room for the gluing process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra lightweight scalloped tire beads
Plush open cell inserts included
This is a set of two JConcepts 12mm Hex Hazard Wheels, and are intended for use on the front and rear of the Associated SC10 4x4, as well as the SC10 2WD when equipped with a 12mm hex conversion. Short Course trucks have evolved into high-performance racing vehicles and adjustability is always the key to success. The Hazard will make an immediate impact on the performance of the SC10 trucks by widening the stance of the truck by 6mm in overall width. The increased width will maximize the SC10 and bring it up to the ROAR maximum legal limits in dimensional width.By nature, Short Course trucks have a high center of gravity and tend to feel light or tippy in high-speed sections. There is no better way to improve on-track stability than to add width, and with the Hazard wheels, sweeping through the high-speed corners gets a little easier. Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With the black color and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.NOTE: To use the 12mm hex wheel on the SC10 it requires a 12mm Hex conversion for the front and rear. Features:
Original 1:1 inspired JConcepts Hazard 12mm hex design
3mm per side additional width in offset
Direct bolt-on fit for the SC10 4x4
Bolt-on fit for the SC10 with 12mm hex adapters
Durable design, finish and material
Available in Black or White with matte face appearance
Hassle free and lightweight 1-piece design
Devastatingly handsome
COMPATIBILITY:
Team Associated ProLite 4x4Team Associated ProRallyTeam Associated ProSC 4x4Team Associated RC10 SC5MTeam Associated RC10 SC6.1Team Associated SC10 4x4Team Associated SC10 OriginalTeam Associated SC10.2Team Associated SC10BTeam Associated SC10GT
The JConcepts Fuzz Bite LP Carpet 2.2" Rear Buggy Tire is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Plush open cell inserts included
JConcepts Swagger 2.2" Pre-Mounted 4WD Front Buggy Carpet Tires feature a multitude of heights and angular ribs for corner speed, consistency and straight-line tracking ability. The Swagger has shown to produce ultra-fast lap times while also being easier to drive than other options on the market.
The ultra-low-profile carcass keeps a 4wd buggy very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. JConcepts has added side-wall ribs in a circular pattern to the exterior of the tire to support high-grip racing. The pink compound marked with 2 pink dots on the tire is a medium soft material with good wear characteristics. The pre-mounted JConcepts tires include open cell, medium inserts for plush control mounted on JCO3353 Mono wheels available in bright white and florescent yellow.
Features:
Pre-mounted
JConcepts fit, finish and design
Offset, multiple height, angular ribs
Low-profile carcass for increased response
Carefully shaped carcass for rolling speed
Mounted on authentic JCO3353 wheels
The JConcepts Nessi 2.2" Pre-Mounted Rear Buggy Carpet Tires offer next level performance in a convenient pre-mounted option. Using the pedigree of the Lockness tire these use a similar tread pattern. JConcepts focused on making the Nessi excel in stability and forward bite during their tire design. With a blend of pin-size, pin-separation and a light-weight low-profile carcass the Nessi stands out on the track.
Using industry standard 2.2” bead mounting size, the Nessi is very versatile and has shown to work in many natural and artificial conditions. The semi-circle protrusions, unique to the Lockness and now the Nessi are included in the center section of the tire and on the sidewall area. The low semi-circles improve side-bite but also minimize traction-rolling associated with normal pins.
Features:
Pre-mounted
JConcepts fit, finish and design
3D blended, medium-height pin-size for quick reaction
Semi-circle protrusions for side-bite
Low-profile, wide stance carcass
Incredibly low-profile carcass for rolling speed
Includes, open cell inserts
Mounted on authentic JCO3348Y wheels
This is the JConcepts Team Associated Fin Aluminum 13mm Shock Cap. These precision machined optional shock collars feature a knurled exterior for extra grip and making quick adjustments, a notch for location and identifying a track-side ride height change. Package includes two Team Associated fin aluminum 13mm shock collars.
Note: These precise collars accept the same inner O-ring as the kit standard with a tiny drop of oil on the O-ring.
Features:
Lightweight durable aluminum
Perfect fit for Team Associated 13mm shocks.
Knurled portion for increased grip
Available in blue or black anodized colors
Etched logos for identification
Aesthetic shock jewelry
COMPATIBILITY:
Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
The JConcepts Clear RC10 B74 "F2" Body with S-Type Wing was designed with aspects learned from the original Finnisher bodies. The F2 is a drop fit for the popular Team Associated B74 and provides an even more aggressive look with details that are crucial to performance.
With the evolution of race tracks with complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance and visible bias which help steering rotation in low traction corners.
The side-pods have been simplified and chamfered. This removes unwanted changes in height to neutralize the at-speed handling. The rear of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear. The JConcepts body is designed exclusively for the updated B74 platform and includes all the necessary cut-lines. These bodies come in standard and lightweight options and each package includes the S-Type wing.
Features:
Original - JConcepts F2 design
Blended wing / body design
Includes two Aero, S-Type rear wings
Clear polycarbonate with protective film
Window masks and decal sheet
JConcepts Swaggers Carpet 2.2" 2WD Pre-Mounted Front Buggy Tires have a multitude of heights and angular ribs for corning speed, consistency and straight-line tracking ability. The Swagger has shown to produce ultra fast lap times while also being easier to drive than other options on the market. The front tires are mounted and fitted to “slim” style front wheels which are already available from JConcepts with part numbers JCO3376W or JCO3376Y.
The ultra low-profile carcass keeps a 2wd buggy very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. JConcepts has added side-wall ribs in a circular pattern to the exterior of the tire to support high-grip racing. The pink compound marked with 2 pink dots on the tire is a medium soft material with good wear characteristics. Since the Swagger tire is so small in diameter, no insert is necessary for championship level performance.
Features:
Pre-mounted with JConcepts fit, finish and design
Offset, multiple height, angular ribs
Low-profile carcass for increased response
Carefully shaped carcass for rolling speed
Pink Medium Soft compound, developed for carpet and astro tracks
No insert required or included
The JConcepts Fuzz Bite LP Carpet 2.2" 4WD Front Buggy Tire is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Open cell, medium inserts included for plush control
JConcepts' "HF2 SCT" Low-Profile Short Course Truck Body was designed for mid-motor SCT trucks with elements that take SCT tuning to the next level. With more reliable stability, increased speeds and more cornering ability in the SCT class, JConcepts has slammed the roof on the HF2 giving racers the ability to push the limit even more than before. Effectively lowering the CG on an SCT truck is a huge advantage and once combined with optional light-weight materials, drivers can feel more confidence inspiring performance "straight outta the package." Air escape details continue to be all the rage in SCT racing and the HF2 body continues the tradition of successful bodies with increased options. Full rear opening capability just behind the cab releases in the most crucial of areas. Larger and more open louvers near the tail end of the bed lend a helping hand while the front fender flares and lower windshield area maintain the tune-ability with trim lines for user preference. The wheel wells are an area of focus on the HF2 body with an edgier appeal and pronounced flare to them. The openings allow for more tire clearance throughout suspension travel and also provide a little release of air during high-speed cornering. The rear number plates have been updated to accommodate the lower roof line and also detailed for appearance. Name plates remain a favorite item on JConcepts bodies and have also be lowered, angled and notched to fit into the rear bed configuration. Metric hardware and light-weight locknuts are included to mount all body included add-ons. As a bonus, the body includes an HF decal sheet for compatibility as well as window mask and customer letter to fill the accessory package.
NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted. Features:
JConcepts original HF2 styling
Slammed roof, low-profile stance
Revised, enlarged air escape passage detail
Protruding fender flares with increased clearance
High angle, detailed number and name plates
Available in standard and light-weight material
Includes Hi-Flow decal sheet, hardware and window mask
COMPATIBILITY:
Losi 22SCT 2.0Team Associated RC10 SC5M
The JConcepts B6/B6D Aluminum Front Camber Link Mount Bulkhead features a 2-piece design that incorporates durable material, innovative machining and tuning into a single package. The front camber link mount sports all 3 popular mounting locations and features a blended design which connects to the front bulkhead forming a unique, stout package. The assembly is available in blue or black anodized colors, featuring the silver edge highlighted areas for the ultimate in glamour. The bulkhead itself has all the tricks. Starting from a small square of a aluminum, the part has been mastered into a pocketed, threaded and high-performance unit complete with 3mm threaded holes, anodizing and laser etching. Included hardware and instruction sheet make installation simple and complete. Joining the 2 pieces together blends the parts and creates the valley for the sway-bar location. The sway-bar area is compatible with standard AE hardware and sway bar kit (not included). The aluminum camber link mount and bulkhead combined with plastic AE suspension mount weigh in at ~28.5gms without hardware making it a tuning adjustment. Features:
Precision machined, 2-piece design
Pocketed, threaded, light-weight
Available in blue and black anodized colors
Comparable weight, tuning adjustment
Glamour appearance
Weight notes:
Team Associated front plastic camber link mount and bulkhead with plastic AE suspension mount = ~14.8gms
Team Associated front plastic camber link mount and bulkhead with aluminum AE suspension mount = ~20.3gms
JConcepts front camber link mount and bulkhead with plastic AE suspension mount = ~28.5gms
JConcepts front camber link mount and bulkhead with aluminum AE suspension mount = ~34.0gms
Team Associated front plastic camber link mount and bulkhead with brass AE suspension mount = ~41.7gms
JConcepts front camber link mount and bulkhead with brass AE suspension mount = ~55.4gms
COMPATIBILITY:
Team Associated RC10 B6Team Associated RC10 B6.1Team Associated RC10 B6.1DTeam Associated RC10 B6.2Team Associated RC10 B6.2DTeam Associated RC10 B6D
The JConcepts Mini-T 2.0 "Finnisher" Body incorporates pre-dimpled locations for the hottest mini trucks on the market. The clear body has a slight cab forward, raked windshield and aggressive stance that highlight a performance-oriented core. The front hood scoop allows plenty of clearance for mini front-end geometry and body mounts while smoothing out the front down force area. Front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while the supplied decals stand-out like an 18-wheeler.
Just like the larger trucks, the Mini-T body has all the performance-based features like air-escape passages which can be trimmed by the customer for better “in-flight” characteristics. Recessed windows look heavy and adds to the depth of the Finnisher styling. Heavy bracing between the back of the cab and rear shock tower humps connect the features and add some rigidness to the design. The rear spoiler is included as part of the rear of complete body assembly mold.
Each body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage. Performance driven, battle tested – JConcepts is, World Proven Innovation and Design.
Notes from the teamRemember to trim off the rear spoiler from the main body before painting. The spoiler should be painted on the reverse side for best results.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
Original - JConcepts Finnisher design
Drop-on fit for the Losi Mini-T 2.0
Blended wing / body design
Included spoiler, located on the back of the body mold
Clear polycarbonate with protective film
Window masks and Finnisher decal sheet
These JConcepts 12mm Hex Mono 2.2 4WD Front Buggy Wheels are a direct fit for TLR 22X-4, B74.1, and XRAY XB4 vehicles, helping to simplify your wheel selection. Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight convex dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
Features:
Popular dish styling and detail
4 wheels included per package
Available in bright white and fluorescent yellow
Vent holes included for ease of operation
Advanced manufacturing process and durable material
Direct fit for the front of the TLR 22X-4, B74.1, and XRAY XB4
Fin, 13mm Shock Collar, Blue or Black, Fits Team Associated 13mm Shock Body
Adding to shock luster and performance, the JConcepts shock collar for 13mm shocks has a knurled exterior for extra grip and making quick adjustments. A notch has been added for location and identifying a track-side ride height change. The precise collar accepts the same inner o-ring as the kit standard and with a tiny drop of oil on the o-ring, is easily adjustable from any position. These nifty parts are available in blue or black anodizing and include the etched JC logo for identification.
Features:
JConcepts design and function
Aluminum, light-weight / durable construction
Knurled portion for increased grip
Available in blue or black anodized colors
Etched logos for identification
Fits 13mm Team Associated shocks
Fuzz Bite Overview:
This is the JConcepts Fuzz Bite Carpet 2.2" Stadium Truck Tire. This is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides a quick transition at high speed and minimizes side wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision.
The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight-knit CRC carpeting. The alternating rows of pins provide side bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity.
The Fuzz Bite incorporates a small radial rib on the outside with an angular cross to give consistent cornering but also a forward mid-corner launch grip. A unique feature of the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight.
Note: During the gluing process, it is also handy to have some breathing room for the gluing process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra lightweight scalloped tire beads
Plush open cell inserts included
The JConcepts Combo Thumb Wrench combines the two most popular sizes for hex nuts in the RC industry. The JConcepts 5.5 | 7.0mm combo wrench has major flexibility packed into a compact one-piece design. The light-weight, machined aluminum wrench is available in blue and black anodized colors and features a dual-end concept. The main hub of the unit has been knurled for finger tip control and features several heavy cuts for increased grip for those, pesky, hard to turn lock-nuts. The sizing is indicated by laser etching on each end and is topped off with JC logo for authenticity.Features:
Convenient combo 5.5 | 7.0mm design
Light-weight design, aluminum material
Available in blue and black anodized colors
Knurled hub for finger tip control
Laser etched for size and authenticity
COMPATIBILITY:
Team Associated RC10 B5 OriginalTeam Associated RC10 B5MTeam Associated RC10 B5M Factory LiteTeam Associated RC10 SC5MTeam Associated RC10 T5MTeam Associated RC10 T6.1Team Associated RC10B6 OriginalTeam Associated RC10B6.1Team Associated RC10B6.1DTeam Associated RC10B6.2Team Associated RC10B6.2DTeam Associated RC10B6D
JConcepts Swaggers Carpet 2.2" 1/10 4WD Buggy Front Tires has a multitude of heights and angular ribs for corner speed, consistency and straight-line tracking ability. The Swagger has shown to produce ultra fast lap times while also being easier to drive than other options on the market. The front tires are designed for the width of the 4wd front wheels but will also fit a standard 2wd front wheel which are already available from JConcepts.The ultra low-profile carcass keeps a 4wd buggy very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. JConcepts has added side-wall ribs in a circular pattern to the exterior of the tire to support high-grip racing. The pink compound marked with 2 pink dots on the tire represents a new compound for JConcepts, a medium soft material with good wear characteristics. Since the Swagger tire is so small in diameter, the tire can be run with or without a front insert.
Features:
JConcepts fit, finish and design
Offset, multiple height, angular ribs
Low-profile carcass for increased response
Carefully shaped carcass for rolling speed
Pink Medium Soft compound, developed for carpet and astro tracks
No insert required or included
This is an optional JConcepts luminum Steering Bellcrank Set for the B6 and B6D. JConcepts has the steering system on the B6 & B6D covered with this light-weight, aluminum steering bellcrank assembly. A servo saver-less aluminum steering system is CNC-machined and replaces the stock plastic components. The steering bellcranks by JConcepts come in a blue or black anodized finish and sport machined chamfered silver edges and engraved JC logos. The aluminum, light-weight assembly provides a more rigid steering system with increased steering feel and response.
Features:
CNC Machined
Light-weight, rigid steering feel and response
Anodized with chamfered silver edging
Blue or black anodized color options
Laser engraved JC logos
NOTE: When attaching any steering rack to the bellcranks it’s necessary to use the Team Associated (included) crush tubes inside and between the bearings in the steering rack as the kit instructions recommends. As a general rule, always use a light amount of thread locking compound on any thread which assembles into aluminum.
Team Associated RC10B6 OriginalTeam Associated RC10B6.1Team Associated RC10B6.1DTeam Associated RC10B6.2Team Associated RC10B6.2DTeam Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6D
The JConcepts B6.3 Servo Mount Brace is an optional upgrade that features a simple and sleek design to provide improved performance and strength to your servo mount. The servo mount requires no modification for installation and adds support to the chassis servo mounting area, while the 2 screw mounting locations allow a direct mount to the chassis. The brace has locations on each side for included 3x6mm set screws to help align and maintain servo position during racing conditions, crashes, and hard hits. The set screws are intended to secure the servo case and provide additional support retaining the servo in the intended position to help maintain consistent steering trim.
Installation
To install, completely remove servo from vehicle and remove standard mounts. With the servo horn already in the correct position, align plastic shims or without as previously used on the servo. Install brace to each side and loosely fasten factory mounting screws with washers into the 4 locations and snug them. Now, center the servo between the brace and install the 3x6mm set screws on each side, use a light amount of thread locking compound (JCO8136) RM2 thread lock adhesive and snug them to touch off and keep the servo in place.
Completely clamp the 4 mounting screws on the front side to lock servo position. Remember to always use a light amount of thread locking compound when securing steel screws into aluminum. Reinstall the servo to vehicle and trim out and check EPA adjustments to complete assembly.
Features:
JConcepts original design and function
Machined aluminum, wrap-around concept
Set screw-controlled centering feature
Available in blue and black anodizing colors
Aesthetic jewelry
The JConcepts 12mm Hex Mono Front Wheel for the B64 is purpose designed wheel for this popular kit. JConcepts Mono 2.2” wheels are designed in the popular dish style and available in bright white and fluorescent yellow. The B64 has not been left out of the Mono wheel development and while the rear easily utilizes the same configuration as the B6 vehicles, the front wheel, is a matching stylized wheel that is a direct bolt-on for the kit.The B64 front Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight convex dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.Features:
Popular dish styling and detail
4 wheels included per package
Available in bright white and fluorescent yellow
Vent holes included for ease of operation
Advanced manufacturing process and durable material
Direct fit for the front of the Team Associated B64
The JConcepts B6.4/B6.4D "P2" Buggy Body with Carpet Wing for the Team Associated B6 vehicle is the meanest, nastiest thing out for 1/10th buggy racing. The Punisher 2 separates itself from the rest with its distinctive styling. The P2 is all about performance with riveting details including raised nose/hood, taller cab and rear-end force features. The side-pods are once again JC chamfered to provide that legendary look and the secondary window screams JConcepts styling. The cab drops off quickly and runs deep toward the rear giving plenty of drift to the newly added winglets. The tall, rear fin stabilizer acts as a vane to keep the buggy tracking in the proper direction while also maintaining a rigid roof-line even with light-weight materials. The P2 body is also available in a standard weight version (JCO0476) giving you extra durability.The Punisher 2 body is made famous by Spencer Rivkin taking the 2wd modified TQ and 1st place during the 2019 IFMAR World Championships in Trencín, Slovakia. Dakotah Phend uses the P2 body at dirt racing events winning the 2021 and 2022 ROAR National Championship with the unique body shell style. The P2, available in standard weight, and light-weight materials give users unmatched tunablity while delivering on class leading looks and swagger.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features:
Original JConcepts Punisher 2 styling
Raised nose/hood with taller P2 cab
Drop-in cab with rear-end winglets
Tall, rear fin stabilizer for tracking performance
Includes:
(1) Associated B6.4/B6.4D "P2" Light Weight Buggy Body (Clear)
(1) Carpet Wing (Clear)
