The Team Associated RC8B4e Team 1/8 4WD Off-Road Electric Buggy Kit is designed to push the limits of off road racing. This buggy has been given a huge overhaul and features updated battery configurations, front upper and lower arm design, rear arm design, chassis braces and rear hub design for peak performance. The front-end geometry has also received updates allowing for increased stability and more consistent steering through the entire steering throw. All of these features come together for a buggy that is ready to dominate the track.
Battery ConfigurationsThis chassis can be configured to two battery configurations.
Configuration 1: Two 2s shorty "saddle pack" batteries are used for the lowest CG and exceptional weight bias
Configuration 2: One 4s shorty for simplified setup and more centralized weight bias over a traditional full length 4s battery
Front Suspension Arms
The front upper and lower suspension arms have been designed to accommodate a wide range of flex and stiffness options. Optional inserts have been made to provide extreme fine tuning and will work with the upper or lower arm. The lower arm features a one-piece anti-roll bar link mounts that are in-line with the anti-roll bar for simplified assembly and operation.
Rear Suspension Arms
The rear arms have been designed for optimum flex and stiffness with no inserts. However, optional inserts may be used for fine tuning. The rear arms also feature a one-piece anti-roll bar link is mounted in-line with the anti-roll bar with a BHCS instead of a shock pin for simplified assembly.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Team Associated RC8B4 and RC8B4e
Features:
Updated front and rear suspension arms
Updated battery configurations
Rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape, and extra clearance for shock position adjustment
Rear wing has more vertical fins for increased straight-line stability, a taller rear wickerbill height for increased downforce, increased strength in various areas to reduce bending fatigue, and dimples on the backside as a template for cutout holes
Rear chassis brace has several design features and flex options
+1mm offset rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning
Specifications:
Scale Size: 1:8 Scale
Terrain: Off-Road
Body Style: Buggy
Drive: 4WD
Length: 486mm (19.13in)
Width: 304.5mm (11.99in)
Wheelbase: varies
Weight: varies
Power Source: Electric
Assembly Level: Kit
Includes:
(1) RC8B4 Off-Road Electric Buggy Kit
Needed to Complete:
(1) 2-channel radio/transmitter
(1) 1:8 scale speed control
(1) 1:8 scale motor, and pinion (see motor manufacturer's gearing recommendations for correct pinion size)
(1) High-torque steering servo
(1) 4S LiPo battery or (2) 2S LiPo shorty "saddle pack" batteries
(1) Compatible charger
(4) 1:8 scale buggy tires & wheels
CA (Cyanoacrylate) glue
Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
Thread-locking compound
Tools
Silicone Shock & Diff Fluid
Transmitter batteries
The Team Associated RC10B74.2 Team 1/10 4WD Off-Road Electric Buggy Kit has been designed to reduce weight, lower the center of gravity and improve jump and bump handling. Building on every iteration of the RC10 platform, the B74.2 allows for higher stability and better predictability.The RC10B74.2 and RC10B74.2D introduce molded gearboxes front and rear, which lower the center of gravity by removing weight from high points of the car. The modified differentials improve rolling speed through turns and increase stability on landings, allowing the buggy to corner faster on higher-grip carpet and clay tracks. The latest 13mm big bore shock technology from Team Associated is included, taking the RC10B74.2 to the next level in jump and bump handling performance. The introduction of gull wing front suspension arms and the inclusion of the LTC gear sets for the differentials make the RC10B74.2 platform easier and more predictable to drive on any track condition.
NOTE: Finished kit shown in photos is for illustrative purposes only. See the Needed to Complete list below for a full list of items required to complete the model.Features:
Lightweight molded gearboxes both front and rear
Two fixed height front gearboxes allowing for +0 and +2mm differential height options
One rear gearbox with RC10B6-style inserts allowing 0, +1, +2, and +3mm differential height options
13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
Gull wing front suspension arms and mating shock tower for a lower center of gravity and better steering predictability
LTC differential gear sets are included. That reduces binding under power, giving a more predictable power delivery
The battery hold-down system uses inserts to adjust weight bias. O-ring style battery strap with pull tabs
Larger 3.5mm turnbuckles with updated rod end style ballcups to increase durability and reduce bind in the suspension
Center bulkhead fan mount that mounts the fan above the motor for better cooling performance
-2mm wing mounts for use with slicks and low-profile carpet tires to further lower the center of gravity
+3mm aluminum steering rack for optimized bump steer at low ride heights
66mm Rear CVA drive shafts and axles for more on-power traction and a more predictable driving feel
2-pad high-load, high-capacity center slipper clutch with LCF pad material
Specifications:Scale: 1/10Drive: 4WDLength: 395mm (15.55in)Width: VariesWheelbase: VariesWeight: VariesInternal Gear Ratio: 2.50:1Assembly Level: KitNeeded to Complete:
1:10 scale electric motor
Electronic speed control
7.4V-7.6V 2S LiPo with shorty battery dimensions (standard or low-profile height)
Battery charger (suited for battery chosen above)
2-channel surface transmitter
2-channel receiver
Steering servo
Lexan(TM) specific spray paint for body
1:10 scale off-road wheels and tires
Team Associated Apex2 ST550 Sport RTR 4WD Rally Car Combo
Team Associated Apex2 ST550 Sport RTR 1/10 Electric 4WD Rally Touring Car. Built on the proven and budget-friendly Apex2 Sport chassis, the ST550 includes some of the latest features in racing. A front and rear independent suspension with coil-over shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac, which makes it a perfect platform for the (Super Touring) race class!
Although this ST550 is built on a budget chassis, it is still a great performer that can be an all out racing platform! Features a redesigned chassis layout that accepts shorty and stick packs, sealed center driveline for smooth and reliable power delivery, sealed front and rear gear differentials, steel dog bones and drive axles, front and rear independent suspension for superior control, coil-over smooth shock absorbers, an aluminum motor plate and adjustable shock mounting and body post height locations!
Team Associated Apex2 Sport ST550
Features:
Fully assembled, painted and ready-to-run
Redesigned chassis layout that accepts shorty and stick packs
Reedy powerful and waterproof SC500X brushed ESC and 550 15-Tunrn 3-Slot brushed motor
Sealed center driveline for a smooth and reliable power delivery
Sealed front and rear gear differentials
Steel dog bones and drive axles
Adjustable rear suspension allows you to increase or decrease rear grip
Front and rear independent suspension for supreme control
Coil-over smooth shock absorbers
Aluminum motor plate
Adjustable shock mounting locations
Molded one-piece tie rods and steering links
Adjustable body post height locations
POM-filled injection-molded pivot balls
Injection molded brake calipers and rotors provide a sporty scale look
Injection molded spoiler and accessories
Race inspired radial tires mounted on 1.9" white turbine-style wheels
Specifications:
Scale: 1/10
Power Plant: Electric
Length: 18.03in (458mm)
Width: 7.48in (190mm)
Wheelbase: 10.2in (259mm)
Weight: Varies
Gear Ratio: 2.6:1
Drivetrain: 4WD
Completion Level: RTR
Includes:
(1) Apex2 ST550 Sport RTR 1/10 Electric 4WD Rally Touring Car
(1) XP120 2.4GHz Transmitter and Receiver
(1) Reedy WolfPack LiPo 3000mAh 30C 7.4V Shorty w/T-plug
(1) Reedy 324-S Compact Balance Charger
Needed to Complete:
(4) AA batteries for transmitter
Team Associated Apex2 Datsun 620 Electric 4WD Touring Truck
Team Associated Apex2 Datsun 620 Sport RTR 1/10 Electric 4WD Touring Truck. Built on the proven and budget-friendly Apex2 Sport chassis, the Datsun 620 includes some of the latest features in racing. A front and rear independent suspension with coil-over shocks and active rear toe give the Apex2 Sport the ultimate in handling on uneven tarmac, which makes it a perfect platform for your everyday hooning!
This Datsun 620 is a built 1970s budget truck that has been in car culture for over 50 years and will be around for 50 more. This stunning chassis was designed and painted to be an all out hooligan! Featuring Wilwood calipers and slotted brake rotors paired with a redesigned chassis layout that accepts shorty and stick packs, sealed center driveline for smooth and reliable power delivery, sealed front and rear differentials, steel dog bones and drive axles, front and rear independent suspension for superior control, coil-over smooth shock absorbers, an aluminum motor plate, and adjustable shock mounting and body post height locations!
Features:
Fully assembled, painted and ready-to-run
Redesigned chassis layout that accepts shorty and stick packs
Reedy powerful and waterproof SC500X brushed ESC and 550 15-Turn 3-Slot brushed motor
Sealed center driveline for a smooth and reliable power delivery
Sealed front and rear gear differentials
Steel dog bones and drive axles
Adjustable rear suspension allows you to increase or decrease rear grip
Front and rear independent suspension for supreme control
Coil-over smooth shock absorbers
Aluminum motor plate
Adjustable shock mounting locations
Molded one-piece tie rods and steering links
Adjustable body post height locations
POM-filled injection-molded pivot balls
Wilwood brake calipers and Slotted rotors provide insane scale stopping capabilities
Injection molded duckbill spoiler and accessories
Radial tires mounted on 1.9" Bronze turbine-style wheels
Specifications:
Scale: 1/10
Power Plant: Electric
Length: 18.03in (458mm)
Width: 7.48in (190mm)
Wheelbase: 10.2in (259mm)
Weight: Varies
Gear Ratio: 2.6:1
Drivetrain: 4WD
Completion Level: RTR
Includes:
(1) Apex2 Datsun 620 Sport RTR 1/10 Electric 4WD Touring Truck
(1) XP120 2.4GHz Transmitter and receiver
(1) Reedy WolfPack LiPo 3000mAh 30C 7.4V Shorty w/T-plug
(1) Reedy 324-S Compact Balance Charger
Needed to Complete:
(4) AA batteries for transmitter
Team Associated RC10B6.4 Team Kit - 2WD High Traction Carpet & Clay
The Team Associated RC10B6.4 Team Kit was developed with a goal of improving jumping and landing, updating the steering feel to be "easy to drive fast," and making the buggy corner faster on high-grip carpet and clay.
The RC10B6.4 platform continues the AE trend of creating kits specific to the surfaces they are being raced on. The B6.4 includes next generation 13mm diameter big-bore shocks and springs to provide the ultimate in damping and stability. The larger diameter shocks reduce pressure inside the shock and minimize the effects of the shaft displacement. This allows the buggy to feel like it's riding on an invisible cloud when you hit harsh jumps and landings. The chassis, front end, and steering system are optimized for running reduced caster and kickup, which excels on high-speed, high-grip surfaces. An updated steering system with adjustable height bellcranks helps racers minimize bump steer. In addition, the front suspension is equipped with -1mm kingpin offset steering and caster blocks for smooth and predictable front-end feel through the entire throw. The -1mm design pushes the steering pivot closer the center of the front tire, keeping the front end flat through the entire steering throw.The RC10B6.4 Team Kit will be the buggy of choice for high-grip carpet or turf track surfaces with the +3mm chassis layout, 11mm Octalock LCF slipper clutch setup, steel ESC and servo weights, and included anti-roll bars front and rear. An updated chassis layout and ESC weights allow forward-mounted electronics closer to the servo, as well as additional forward battery placement over the previous model. These weight tuning options allow for more high-speed stability and on-power steering on high grip carpet.Both carpet and dirt cars share many great features, such as an easy-access rear differential, wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones, and updated carbon fiber shock towers with molded protective covers. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion.
The setups and tuning parts remain interchangeable between the RC10B6.4 and the RC10B6.4D configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
+3mm length aluminum chassis with 22.5 degree kick-up to complement updated front-end geometry and shape to reduce chassis scrub with the track surface
20deg., 22.5deg., and 25deg. molded bulkheads included for a complete range of caster and kickup options
Adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
-1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
Front ballstud mount, top plate, and front wing mount to account for the kickup angle change
Chassis side rails with 3 optional fan mount locations to choose from depending on chassis length and transmission used
Cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness
Front and rear anti-roll bars included
4mm carbon fiber front and rear shock towers with molded protective covers
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit
Length: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Internal Gear Ratio: 2.60:1
Drive: 2WD
Needed to Complete:
1:10 scale electric motor and electronic speed control
7.4V-7.6V 2S LiPo with "shorty" battery dimensions
Battery charger
2-channel surface transmitter, 2-channel receiver, and steering servo
Polycarbonate specific spray paint for body
1:10 scale off-road wheels and tires
AA batteries
Tools & Silicone Fluids
Team Associated RC10SC6.4 Electric 2WD SC Team Truck Kit
Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit. Based on the legendary successful RC10SC6.2 Short Course truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs. The RC10SC6.4 shares key components with the RC10T6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ballstud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles. With so many more features, tuning options and upgrades, we can all agree that the RC10SC6.4 is the ultimate kit option for all the competitive racers seeking high performance and quality!
NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Updated Features:
13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
13mm machined shock pistons
Updated front ballstud mount and top plate with an angled steering system for improved steering consistency
Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability
Updated rear suspension with wider C and D mounts from the RC10B6.4 series
Updated longer 92.5mm CVA driveshafts for more rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
Updated chassis side rails with the RC10B6.4 fan mount system
Updated short course truck length aluminum chassis with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface
(20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options
B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles
Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias
Factory Team RC10B6.4 11g aluminum ESC tray
Specifications:
Scale: 1/10
Power Plant: Electric
Length: Varies
Width: Varies
Height: Varies
Wheelbase: 325mm (8.86in)
Gear Ratio: 2.6:1
Drivetrain: 2WD
Surface: Off-Road
Completion level: Unassembled
Includes:
(1) Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit
Needed to Complete:
(1) Steering servo
(1) 2-channel transmitter & receiver
(1) 1:10 scale 540-size electric motor & ESC
(1) 2S LiPo battery
(1) Polycarbonate SC Truck body
Paint for polycarbonate body
Wheels & Tires
Assembly Tools & Tires CA glue
Team Associated RC10B6.4D Team Buggy Kit - 2WD Dirt Track Dominator
The Team Associated RC10B6.4D Team Kit continues the AE trend of creating kits specific to the surfaces they are being raced on. The B6.4D includes next generation 13mm diameter big-bore shocks and springs to provide the ultimate in damping and stability. The larger diameter shocks reduce pressure inside the shock and minimize the effects of the shaft displacement. This allows the buggy to feel like it's riding on an invisible cloud when you hit harsh jumps and landings. The chassis, front end, and steering system is optimized for running reduced caster and kickup, which excels on high speed, high grip surfaces. An updated steering system with adjustable height bellcranks helps racers minimize bump steer. In addition, the front suspension is equipped with -1mm kingpin offset steering and caster blocks for smooth and predictable front end feel through the entire throw. The -1mm design pushes the steering pivot closer the center of the front tire, keeping the front end flat through the entire steering throw.
The RC10B6.4D Team Kit includes a dirt-length 19mm Octalock LCF slipper clutch setup, aluminum ESC weight, layback gearbox, and an optimized dirt kit setup. An updated chassis layout and ESC weights allow forward mounted electronics closer to the servo, as well as additional forward battery placement over the previous model. These weight tuning options allow for more high-speed stability and on-power steering.
Both carpet and dirt cars share many great features, such as an easy-access rear differential, wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones, and updated carbon fiber shock towers with molded protective covers. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. The setups and tuning parts remain interchangeable between the RC10B6.4 and the RC10B6.4D configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
Dirt length aluminum chassis with 22.5deg. kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface
20deg, 22.5deg, and 25deg molded bulkheads included for a complete range of caster and kickup options
Adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
-1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
Front ballstud mount, top plate, and front wing mount to account for the kickup angle change
Chassis side rails with three fan mount locations to choose from depending on chassis length and transmission used
Caged thrust bearing for ball differential
Cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit
Length: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Internal Gear Ratio: 2.60:1
Drive: 2WD
Needed to Complete:
1:10 scale electric motor and electronic speed control
7.4V-7.6V 2S LiPo with "shorty" battery dimensions
Battery charger
2-channel surface transmitter, 2-channel receiver, and steering servo
Polycarbonate specific spray paint for body
1:10 scale off-road wheels and tires
AA batteries
Tools & Silicone Fluids
Team Associated RC10T6.4 Electric 2WD Team Stadium Truck Kit
Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit. Based on the legendary successful RC106.2 Stadium truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs. The RC10T6.4 shares key components with the RC10SC6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ballstud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles. With so many more features, tuning options and upgrades, we can all agree that the RC10T6.4 is an ultimate kit option for all the competitive racers seeking high performance and quality!
NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Updated Features:
13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
13mm machined shock pistons
Updated front ballstud mount and top plate with an angled steering system for improved steering consistency
Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability
Updated rear suspension with wider C and D mounts from the RC10B6.4 series
Updated longer 92.5mm CVA driveshafts for more rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
Updated chassis side rails with the RC10B6.4 fan mount system
Updated aluminum chassis length with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface
(20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options
B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles
Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias
Factory Team RC10B6.4 11g aluminum ESC tray
Specifications:
Scale: 1/10
Type: Stadium Truck
Drivetrain: 2WD
Surface: Off-Road
Power Plant: Electric
Completion level: Unassembled
Length: Varies
Width: Varies
Height: Varies
Wheelbase: Varies
Includes:
(1) Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit
Needed to Complete:
(1) Steering servo
(1) 2-channel transmitter & receiver
(1) 1:10 scale 540-size electric motor & ESC
(1) 2S LiPo battery
(1) Polycarbonate Stadium Truck body
Paint for polycarbonate body
Wheels & Tires
Assembly Tools & Tires CA glue
This is the Reedy Blackbox 610R 2S Competition ESC. Building off of the innovative features used with the Reedy Blackbox 510R ESC the 610R gives users even more performance and adjustability. Using updated 32-bit hardware this gives the user crisp and instant throttle response along with incredible brake feel. Adding to this are additional tuning options allowing the ability to further fine tune your driving experience. With the ability to handle both stock and modified 1/10 applications the Blackbox 610R is suitable for a wide range of racing applications and is the choice of champions!PROgrammer2With the optional Blackbox PROgrammer2 (not included), the full potential of the 610R can be exploited. In addition to working as a programmer, it also operates as a battery monitor and USB firmware update device. The 610R ESC includes two modes that can be modified and saved independently from one another. Standard mode offers a wide variety of tuning options while Expert mode takes it one step further and opens additional options for more experienced racers and/or racing classes that can take advantage of these advanced settings.
The following functions can be modified and saved using the Blackbox PROgrammer2:
Brake: Overall brake strength, frequency, drag brake, initial brake, and punch can be fine-tuned to perfect brake performance and feel in different vehicles and track conditions. Dynamic Drag Brake settings function allows users to add additional drag brake when conditions make it advantageous.
Throttle: Drive frequency, punch, initial throttle, current limit, and dead band adjustability make the perfect setup possible regardless of the type of motor chosen and the type of vehicle being raced.
Motor Power: Advanced acceleration boost and top speed timing settings are particularly useful on large tracks in applications such as 1:10 Touring Car and spec classes where ESC timing is permitted. Each setting can be used individually or together to achieve maximum power and speed. When in Standard tuning mode, timing adjustments are simplified for newer users or in applications such as 1:10 off-road where advanced settings are not required.
Miscellaneous Control: With the PROgrammer2, select between Forward/Brake or Forward/Brake/Reverse mode and adjust the BEC output voltage depending on the type of servo used and desired servo speed. Adjust the desired low voltage cutoff or disable it completely. The temperature at which the ESC cuts motor power due to overheating can also be adjusted or disabled. Reversing the rotation of the motor is also possible.
NOTE: To program the Blackbox 610R, the ASC27027 Programmer with firmware version EE460139 must be used. This version is already installed when purchasing the ASC27017 610R/Programmer combo.
Features:
CNC-machined black aluminum case with integrated heat sink
Fully adjustable brake, throttle, power, and safety functions (with Blackbox PROgrammer2: ASC27027)
Blinky mode with ROAR approved software
Precision throttle and brake control
Ultra-low resistance FET board
On-board power button
32-bit microcontroller unit (MCU)
Solder tabs with 13-gauge power wires
Pro external capacitor board
RPM and ESC temp data logging (with Blackbox PROgrammer2: ASC27027)
Firmware updateable (with Blackbox PROgrammer2: ASC27027)
Specifications:Voltage Input: 2S LiPoSuggested Applications: 1:10 off-road, 1:10 on-roadResistance (ohms): 0.00043Continuous Current (A): 160Dimensions (mm): 38.5x36.9x19.5Motor Limit: 4.5TWeight w/o wires & fan (g): 45BEC (Adjustable): 6.0-7.4V/5APower Wires: 13-gauge siliconeFan: Optional
This is the Reedy Sonic 540-SP5 Spec Brushless Motor. Designed to give you legendary Reedy power and performance the SP5 line of brushless motors has been expertly optimized with an innovative unique design.
The incredible performance of the SP5 starts with the stator. Designed in-house, the stator's profile is intended to achieve maximum torque and power output without sacrificing RPM. High-quality copper magnet wire, sized to the maximum that the rules allow and wound with care to keep resistance near the legal minimum, is treated with heat transfer epoxy to dissipate heat and reduce internal temperatures resulting in less fade over the course of the race. An oversized collector ring not only dissipates heat, but in conjunction with thick solder tabs, reduces resistance and power loss.A balanced rotor features a high-strength magnet that takes full advantage of dimensional rules to produce fade-free power with maximum effectiveness. The rotor is supported by precision stainless steel ball bearings to accommodate high RPM loads with exceptional efficiency and reliability. Like all Reedy Sonic motors, a high-quality sensor board rounds out the motor's interior.Externally, the SP5 utilizes a lightweight two-piece CNC machined aluminum housing with an aluminum endcap and timing adjustability to accommodate fine-tuning for specific applications. This lightweight package is a welcome way to improve vehicle handling while improving chassis tuning flexibility.
Features:
CNC-machined housing with optimized air cooling
Custom high-power stator design
Low-resistance solder tabs and collector ring
Balanced rotor with high-strength magnet
Dual precision ball bearings
Aluminum end cap with adjustable timing
Completely rebuildable
Competition proven
Built to ROAR specifications
Specifications:
Input Voltage: 1-2S LiPo
Diameter: 35.9mm
Length: 52.5mm
Shaft Diameter: 3.15mm
Weight: 147-151g
Includes:
(1) Sonic 540-SP5 Spec Brushless Motor (10.5T)
Reedy's all-new Sonic SP5 stock motors feature an all-new and unique design, incorporating many features that will put it at the top of the pyramid when it comes to stock motor performance.The incredible performance of the SP5 starts at the heart of the motor--the stator. Designed in-house, the stator's profile is intended to achieve maximum torque and power output without sacrificing RPM. High-quality copper magnet wire, sized to the maximum that the rules allow and wound with care to keep resistance near the legal minimum, is treated with heat transfer epoxy to dissipate heat and reduce internal temperatures resulting in less fade over the course of the race. An oversized collector ring not only dissipates heat, but in conjunction with thick solder tabs, reduces resistance and power loss.A balanced rotor features a high-strength magnet that takes full advantage of dimensional rules to produce fade-free power with maximum effectiveness. The rotor is supported by precision stainless steel ball bearings to accommodate high RPM loads with exceptional efficiency and reliability. Like all Reedy Sonic motors, a high-quality sensor board rounds out the motor's interior.Externally, the SP5 utilizes a lightweight two-piece CNC machined aluminum housing with an aluminum endcap and timing adjustability to accommodate fine-tuning for specific applications. This lightweight package is a welcome way to improve vehicle handling while improving chassis tuning flexibility.
Features:
CNC-machined housing with optimized air cooling
Custom high-power stator design
Low-resistance solder tabs and collector ring
Balanced rotor with high-strength magnet
Dual precision ball bearings
Aluminum end cap with adjustable timing
Completely rebuildable
Competition proven
Built to ROAR specifications
Includes:
(1) Sonic 540-SP5 Spec Brushless Motor (13.5T)
Features:
CNC-machined housing with optimized air cooling
Custom high-power stator design
Low-resistance solder tabs and collector ring
Balanced rotor with high-strength magnet
Dual precision ball bearings
Aluminum end cap with adjustable timing
Completely rebuildable
Competition proven
Built to ROAR specifications
Cells:
1-2S LiPo
Diameter (mm):
35.9
Length (mm):
52.5
Shaft Dia. (mm):
3.15
Weight (g):
147-151
The incredible performance of the SP5 starts at the heart of the motor--the stator
Reedy's all-new Sonic SP5 stock motors feature an all-new and unique design, incorporating many features that will put it at the top of the pyramid when it comes to stock motor performance.The incredible performance of the SP5 starts at the heart of the motor--the stator. Designed in-house, the stator's profile is intended to achieve maximum torque and power output without sacrificing RPM. High-quality copper magnet wire, sized to the maximum that the rules allow and wound with care to keep resistance near the legal minimum, is treated with heat transfer epoxy to dissipate heat and reduce internal temperatures resulting in less fade over the course of the race. An oversized collector ring not only dissipates heat, but in conjunction with thick solder tabs, reduces resistance and power loss.A balanced rotor features a high-strength magnet that takes full advantage of dimensional rules to produce fade-free power with maximum effectiveness. The rotor is supported by precision stainless steel ball bearings to accommodate high RPM loads with exceptional efficiency and reliability. Like all Reedy Sonic motors, a high-quality sensor board rounds out the motor's interior.Externally, the SP5 utilizes a lightweight two-piece CNC machined aluminum housing with an aluminum endcap and timing adjustability to accommodate fine-tuning for specific applications. This lightweight package is a welcome way to improve vehicle handling while improving chassis tuning flexibility.
Features:
CNC-machined housing with optimized air cooling
Custom high-power stator design
Low-resistance solder tabs and collector ring
Balanced rotor with high-strength magnet
Dual precision ball bearings
Aluminum end cap with adjustable timing
Completely rebuildable
Competition proven
Built to ROAR specifications
Cells:
1-2S LiPo
Diameter (mm):
35.9
Length (mm):
52.5
Shaft Dia. (mm):
3.15
Weight (g):
147-151
The incredible performance of the SP5 starts at the heart of the motor--the stator
Reedy's all-new Sonic SP5 stock motors feature an all-new and unique design, incorporating many features that will put it at the top of the pyramid when it comes to stock motor performance.The incredible performance of the SP5 starts at the heart of the motor--the stator. Designed in-house, the stator's profile is intended to achieve maximum torque and power output without sacrificing RPM. High-quality copper magnet wire, sized to the maximum that the rules allow and wound with care to keep resistance near the legal minimum, is treated with heat transfer epoxy to dissipate heat and reduce internal temperatures resulting in less fade over the course of the race. An oversized collector ring not only dissipates heat, but in conjunction with thick solder tabs, reduces resistance and power loss.A balanced rotor features a high-strength magnet that takes full advantage of dimensional rules to produce fade-free power with maximum effectiveness. The rotor is supported by precision stainless steel ball bearings to accommodate high RPM loads with exceptional efficiency and reliability. Like all Reedy Sonic motors, a high-quality sensor board rounds out the motor's interior.Externally, the SP5 utilizes a lightweight two-piece CNC machined aluminum housing with an aluminum endcap and timing adjustability to accommodate fine-tuning for specific applications. This lightweight package is a welcome way to improve vehicle handling while improving chassis tuning flexibility.
Features:
CNC-machined housing with optimized air cooling
Custom high-power stator design
Low-resistance solder tabs and collector ring
Balanced rotor with high-strength magnet
Dual precision ball bearings
Aluminum end cap with adjustable timing
Completely rebuildable
Competition proven
Built to ROAR specifications
Cells:
1-2S LiPo
Diameter (mm):
35.9
Length (mm):
52.5
Shaft Dia. (mm):
3.15
Weight (g):
147-151
Sticky Kicks RC Is Stocked To Offer Our New Superdialed Five Star V2 Titanium Screw Sets! Made Of Super Strong And Lightweight Grade 5 Titanium. Our V2 Ti Screws Offer A 2.5mm Hex Head And Are Available In Some Tasty Colors! Complete Upper Kits For The Popular 4WD Buggies.
Product Details
Grade 5 Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBITY:
TEAM ASSOCIATED B74.2
Team Associated Factory Team FOX Kashima Coated Shock Body Kit. This kit is an optional upgrade intended for the B6.4 and B6.4D buggies. Featuring genuine FOX Kashima coating these shock bodies offer silky smooth, long lasting operation and give your ride the Factory Team look! Additionally included are some fresh shock shafts and seals to give you optimum sealing and a truly supple feeling shock setup. Includes:
(2) FOX Kashima Coated Front Shock Bodies
(2) FOX Kashima Coated Rear Shock Bodies
(2) Front Shock Shafts
(2) Rear Shock Shafts
(4) Shock Seals and Bushings with Hardware
COMPATIBILITY:
Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
Team Associated RC10B6.4 Chassis. This replacement chassis is intended for the Team Associated B6.4. Package includes one aluminum chassis plate.
COMPATIBILITY:
Team Associated RC10B6.4Team Associated RC10B6.4D
Sticky Kicks RC RAW DOG 2WD V2 Titanium Screw Set
Sticky Kicks RC Is Stocked To Offer Our New Superdialed Five Star V2 Titanium Screw Sets! Made Of Super Strong And Lightweight Grade 5 Titanium. Our V2 Ti Screws Offer A 2.5mm Hex Head And Are Available In Some Tasty Colors! Complete Upper Kits For The Popular 2WD Buggies.
Product Details
Grade 5 Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBITY:
TEAM ASSOCIATED B6.4
The Reedy Sonic 540-FT 17.5 Competition Brushless Motor was designed to deliver performance and value. This is a great option for racers, clubs, and racing series that want to equalize performance among participants at an economical price.Features:
CNC machined lightweight can
Solder tabs
Dual precision ball bearings
High-strength, balanced rotor
Fixed timing of 45 degrees
Completely rebuildable
ROAR approved
Specifications:Cells: 1-2S LiPoDiameter (mm): 35.8Length (mm): 51.8Shaft Dia. (mm): 3.15Weight (g): 175
The Team Associated 13mm Big Bore Front Shock Kit is a next generation 13mm diameter, 23mm long big-bore shock that delivers the ultimate in damping and stability. The larger diameter shocks reduce pressure inside the shock and minimize the effects of the shaft displacement. Package includes the parts needed to build two front shocks.
NOTE: Shock springs and shock oil are not included and must be purchased separately.
COMPATIBILITY:
Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
This is a optional RCScrewz Stainless Steel Screw kit for the Axial SCX6 Jeep. RCScrewz Stainless Screw Kits are 100% complete. Your screw kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason your not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.
All RCScrewz Kits include:
All socket screws + Extras
Button Screws + Extras
Flat Head Screws + Extras
Set Screws + Extras
Nuts + Extras
Washers + Extras
Bondhus Short Arm hex Wrenches All Sizes
Quality Reusable plastic pit case
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the the kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of RC Screwz field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations.
COMPATIBILITY:
Axial SCX6
Team Associated SR10 Street Stock Pre-Painted Body. This replacement body is intended for the Team Associated SR10. Package includes one pre-painted body.
COMPATIBILITY:
Team Associated SR10
After months of anticipation, Reedy's highly developed Blackbox 510R Competition ESC is now available to racers worldwide. Extensive race testing by Reedy's engineering and racing team has resulted in a high performance, high quality, and reliable ESC suitable for all levels of competition. Thanks to excellent throttle and brake feel, a wide range of precision adjustability, and durable high-quality hardware, the Blackbox 510R is suitable for a wide range of racing applications.
With the PROgrammer2, select between Forward/Brake or Forward/Brake/Reverse mode and adjust the BEC output voltage depending on the type of servo used and desired servo speed. Adjust the desired low voltage cutoff or disable it completely. The temperature at which the ESC cuts motor power due to overheating can also be adjusted or disabled. Reversing the rotation of the motor is also possible.
NOTE: The Blackbox 510R and PROgrammer2 (ASC27027) are not compatible with the Blackbox 410R and original PROgrammer (ASC27025).
The Team Associated B74.1 3 Pad Slipper Conversion is an upgrade that converts the kit 2-pad slipper to a 3-pad slipper clutch. The 3-pad slipper is an ideal tuning option for racers who prefer a smoother, more forgiving clutch.
The stock clutch uses a 11mm I.D. pad with a heavy 500lb/in spring that is ideal for high-traction carpet. The 3-pad conversion uses a standard 19mm I.D. pad with a softer spring to create a smoother throttle feel with softer engagement that is better suited to dirt and low traction conditions. Instructions included.
NOTE: B74.1D kits require the ASC92275 RC10B74.1 Slipper Shaft Outdrive Set (not included) from the RC10B74.1 kit.
COMPATIBILITY:
Team Associated RC10 B74.1Team Associated RC10 B74.1D
The JConcepts 1987 Chevy Camaro IROC Drag Racing Body has been produced to bring an iconic race machine to the RC drag world. Intended for the Team Associated DR10, Losi 22S Drag and Traxxas Drag Slash, this IROC Camaro uses a tight overall width to make fitment a close to scale as possible. Keeping with the original, this body features a large front windshield, rear dove-tailed vents and a rear wing with side-dams all to help keep the car tracking straight. NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.Features:
Officially licensed
Fits a variety of platforms including DR10, Losi 22S, and Drag Slash
Scale inspired body, cab, and window design
1:1 headlight and grill treatment
Clear heavy-duty polycarbonate with protective film
Panel, “race-car” style rear wing assembly with included hardware
Window masks and detailed decal sheet
Specifications: Width: 11.25"Wheelbase: 13"Includes:
(1) 1/10 1987 Chevy Camaro IROC Drag Body
(1) Window mask Sheet
(1) Decal Sheet
COMPATIBILITY:
Team Associated DR10Traxxas Slash 2wd
The JConcepts TLR 22X-4 5.0 3.5mm Fin Turnbuckle Kit features a lengthened adjustment hex area and "finned" cuts that rotate about the center. The base of the shafts design is centered around a .143” titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts standard TLR ball cup configurations.
The turnbuckles are lightweight, and the original “Fin” design brings out the glamour and quality that makes titanium one of the most sought-after exotic materials in the world. The JConcepts turnbuckles are produced with left- and right-hand threads with the left being conveniently marked for easy orientation.
Features:
Original JConcepts design and “Fin” styling
High-grade, machined titanium material, colored in black
Standardized 3.5mm thread base
Available in multiple color options
Left- and right-hand threads with conveniently marked left
COMPATIBILITY:
Losi 22X-4
Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes:
(2) 3.5x45mm Titanium Turnbuckles
(4) 3.5x42mm Titanium Turnbuckles
(1) 3.5x35mm Titanium Turnbuckle
COMPATIBILITY:
Team Associated RC10 B74.2Team Associated RC10 B74.2D
The JConcepts Fin TLR 22 5.0 3.5mm Titanium Turnbuckle Kit is a great upgrade for Team Losi Racing 22 5.0 Buggy Kits. The focus of the styling surrounds the lengthened adjustment hex area and the “finned” cuts that rotate about the center. The base of the shafts design is centered around a .143” titanium hex size which gradually tapers down into a 3.5mm thread base design which accepts standard TLR ball cup configurations.
The turnbuckles are lightweight, and the original “Fin” design brings out the glamour and quality that makes titanium one of the most sought-after exotic materials in the world. The JConcepts turnbuckles are produced with left- and right-hand threads with the left being conveniently marked for easy orientation. Plus, the black color coating gives the stealthiest look in the pits and on the track.
Features:
Original JConcepts design and “Fin” styling
High-grade, machined titanium material, colored in black
Standardized 3.5mm thread base
Left- and right-hand threads with conveniently marked left
Aesthetic jewelry
COMPATIBILITY:
Losi 22 5.0 ACLosi 22 5.0 DCLosi 22 5.0 EliteLosi 22 5.0 SR
The JConcepts Swing Operated Battery Retainer Set is designed for simplicity, adjustability and quick battery changes. The aluminum rails bolt to the standard B6.1 | B6.1D | T6.1 | SC6.1 chassis side rails and with a selection of adjustment holes, can be moved to locate the battery pack fore and aft. The carbon fiber swings include pivoted control by the virtue of steel bushings. The entire assembly is secured using 3 x 16mm BHCS and the front screw provides the closure control and quick access for battery exchanges. Since there is a lot of variation on the height of the battery packs and what is being used at any given moment, JConcepts has included different spacers to accommodate different heights. When using a tall battery pack, it’s necessary to install the tall stand-offs under the aluminum rails to raise the height of the entire assembly. If more height is needed, install the included 2mm spacers to raise the carbon fiber swings giving the most amount of height. For low-profile battery packs, no stand-offs are required under the aluminum rails. Depending on the brand of low-profile battery, it might be necessary to use the 2mm spacers under the carbon swings for just the correct amount of clearance. Some individual preference might be different and by using any assortment of 3mm I.D. washers, a wide range of height adjustments can be achieved. Features:
Precision machined aluminum
Fits B6.1 | B6.1D | T6.1 | SC6.1
Light-weight / durable honeycomb milling
3mm thickness material
Chamfer highlight edging
Available in blue and black anodized colors
Aesthetic jewelry
COMPATIBILITY:Team Associated RC10 B6.1Team Associated RC10 B6.1DTeam Associated RC10 B6.2Team Associated RC10 B6.2DTeam Associated RC10 SC6.1Team Associated RC10 T6.1
Team Associated Factory Team RC10B6.4/B6.4D 3.5mm Titanium Turnbuckle Set. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links..
NOTE: 3.5mm Ballcups are required for installation (ASC92308).
COMPATIBILITY:
Team Associated RC10B6.4Team Associated RC10B6.4D
These are the stock replacement Team Associated B74 9° Aluminum Caster Block Set. Also available are the 8° (ASC92175) and 10° (ASC92177) Blocks.
COMPATIBILITY:
Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1D
Team Associated RC10B6.2 Factory Team Aluminum Rear Hubs are a must have upgrade for your Team Associated race kit. Available in anodized blue or black aluminum with laser-etched FT logo, these hubs add an extra level of bling and precision to your rides. With two set screws to further secure the hub and hub insert to the hinge pin, you can be sure these hubs will stay consistent run after run.
Features:
Available in both blue and black anodized aluminum for increased durability and precision
Set screws included to ensure a play-free assembly
Fits: RC10B6.2, RC10B6.2D, RC10B6.3, RC10B6.3D. Direct replacement for ASC91857 RC10B6.2 Rear Hubs
Hub weight: 10.3g ea
COMPATIBILITY:
Team Associated RC10B6.2Team Associated RC10B6.2DTeam Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6.4Team Associated RC10B6.4D
Wear the same gear as the Reedy racing team and proudly display your favorite power source! Reedy's W19 Pullover hoodie with iconic Reedy logos front and back features a 50/50 cotton and polyester blend to cut the chill.
Sticky Kicks RC is pleased to announce our New Superdialed Five Star 3.5MM Heavy Duty V2 Titanium Turnbuckles for 1/10th Scales Cars. Produced from High Quality Grade 5 Titanium. Lighten and Strengthen Your Car and Add a Little Bling Too!
Product Details
Grade 5 Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBILITY:
TLR 22 5.0
Sticky Kicks RC is pleased to announce our New Superdialed Five Star 3.5MM Heavy Duty V2 Titanium Turnbuckles for 1/10th Scales Cars. Produced from High Quality Grade 5 Titanium. Lighten and Strengthen Your Car and Add a Little Bling Too!
Product Details
Grade 5 Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBILITY:
TLR 22X-4
Sticky Kicks RC is pleased to announce our New Superdialed Five Star 3.5MM Heavy Duty V2 Titanium Turnbuckles for 1/10th Scales Cars. Produced from High Quality Grade 5 Titanium. Lighten and Strengthen Your Car and Add a Little Bling Too!
Product Details
Grade 5 Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBILITY:
TLR 22 5.0
Sticky Kicks RC is pleased to announce our New Superdialed Five Star 3.5MM Heavy Duty V2 Titanium Turnbuckles for 1/10th Scales Cars. Produced from High Quality Grade 5 Titanium. Lighten and Strengthen Your Car and Add a Little Bling Too!
Product Details
Grade 5 Titanium
Complete Upper Sets
Lightweight and Incredibly Strong
COMPATIBILITY:
TEAM ASSOCIATED B6.4
