Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Rear Anti-Roll Sway Bars (5) [92458] 🌀 Keep It Tight in the Turns!Fine-tune your cornering performance with the Team Associated RC10B7 Rear Anti-Roll Sway Bar Set. Whether you’re dialing in for grip or freeing up the rear, this 5-pack gives you options to match any track condition. Made specifically for the RC10B7 and B7D platforms, these bars are a must-have in any serious racer’s pit box. 🔧 Key Features:✅ Includes five different sway bar thicknesses🚗 Designed for the RC10B7 and B7D buggies🔄 Helps balance your setup for optimal rear-end control🏁 Swap in and tune for different track surfaces 📦 Includes:(5) Rear Anti-Roll Sway Bars 🔩 Part Number: 92458🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Caster Block Link Mounts (+0mm) (2) [92467] 🛠️ Dial in your RC10B7 with Factory-Grade Precision!Swap in the Team Associated RC10B7 Carbon Fiber Caster Block Link Mounts for ultra-precise handling and durability where it counts. Made from tough carbon fiber and engineered to spec, these +0mm mounts are a must-have replacement or upgrade for racers chasing podium consistency. 🔧 Key Features:✅ +0mm geometry for a stock setup and consistent steering💪 Made from lightweight, high-strength carbon fiber🚗 Direct fit for the RC10B7—no guesswork, no fuss🔄 Perfect as spares or performance replacements 📦 Includes:(2) Carbon Fiber Caster Block Link Mounts (+0mm) 🔩 Part Number: 92467🏁 Fits: Team Associated RC10B7 1/10 Buggy

Read more less

Team Associated RC10B7 Factory Team Caster & Steering Blocks (Carbon) – Race-Ready Precision Upgrade! 🔥 Upgrade your buggy’s front-end handling with the Team Associated RC10B7 Factory Team Carbon Caster & Steering Blocks. Engineered for high-performance racing, this optional carbon component set delivers increased stiffness and responsiveness for sharper, more consistent steering on the track. 🔧 Key Features: ✅ Constructed from lightweight carbon material for reduced flex✅ Increased steering precision and control✅ Designed for high-grip track conditions✅ Direct fit for RC10B7 and RC10B7D buggies✅ Factory Team performance for serious racers 📦 Includes: (3) Pairs of Steering Blocks (Carbon) (1) Pair of Caster Blocks (Carbon) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Dial in your steering response.Experience the edge of carbon with this Factory Team block set — essential for serious racers chasing consistency and control. 🏎️💥

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

Team Associated RC10B7 Factory Team Carbon Top Plate & Ballstud Mount Set – Eliminate Flex, Maximize Control! 🏁 Upgrade your chassis stiffness and tuning precision with the Factory Team Carbon Top Plate & Ballstud Mount Set for the RC10B7 and RC10B7D. Constructed from Team Associated’s renowned carbon composite material, this lightweight set reduces unwanted flex on high-bite tracks while improving steering consistency and front-end response. ⚙️ Key Features: ✅ Premium carbon composite construction for lightweight durability✅ Reduces chassis flex for consistent handling on high-traction surfaces✅ Improves steering precision and chassis response✅ Perfect for racers looking to fine-tune front-end stiffness✅ Genuine Team Associated Factory Team option part 📦 Includes: (1) Carbon Top Plate (1) Carbon Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🔥 Dial in your front-end tuning with this high-performance Factory Team upgrade from Team Associated! 🏆🔧

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

Reedy Blackbox 610R 2S Competition ESC w/ PROgrammer2 – Next-Level Performance & Precision! Take your RC racing performance to the next level with the Reedy Blackbox 610R 2S Competition ESC, designed for elite-level throttle response, braking precision, and customizable tuning options. Building on the success of the Blackbox 510R, the 610R features updated 32-bit hardware for crisper throttle feel, smoother braking, and enhanced tuning flexibility. Whether you're running stock or modified 1/10 applications, this ESC delivers race-winning control and power. Paired with the included Blackbox PROgrammer2, racers can unlock advanced settings, monitor battery health, and update firmware, making it the ultimate tool for fine-tuning your setup. Key Features: ✅ CNC-Machined Black Aluminum Case w/ Integrated Heat Sink – Provides superior cooling and durability.✅ 32-Bit Microcontroller Unit (MCU) – Ensures precise throttle and brake control with ultra-smooth response.✅ Fully Adjustable Brake, Throttle, Power & Safety Functions – Fine-tune your setup for maximum performance.✅ Blinky Mode with ROAR-Approved Software – Legal for stock class racing.✅ Ultra-Low Resistance FET Board – Delivers efficient power delivery and minimal heat buildup.✅ On-Board Power Button – Convenient and reliable operation.✅ Solder Tabs with 13-Gauge Power Wires – Ensures high current flow for optimal efficiency.✅ Pro External Capacitor Board – Improves voltage stability and consistency.✅ RPM & ESC Temp Data Logging – Monitor real-time performance with the Blackbox PROgrammer2.✅ Firmware Updateable – Stay ahead of the competition with upgradable software. Blackbox PROgrammer2 – Unlock Full Tuning Potential! With the included PROgrammer2, racers can adjust: 🔹 Brake Settings: Fine-tune brake strength, frequency, drag brake, and punch for the ultimate stopping power.🔹 Throttle Control: Adjust drive frequency, punch, initial throttle, current limits, and dead band for a dialed-in feel.🔹 Motor Power: Customize timing and boost settings for maximum speed and acceleration on large tracks.🔹 Miscellaneous Controls: Modify BEC voltage, low voltage cutoff, overheating protection, and reverse settings for the perfect race setup. 📌 Note: The Blackbox 610R requires the ASC27027 Programmer with firmware version EE460139 (included in this combo). Specifications: Voltage Input: 2S LiPo Suggested Applications: 1/10 Off-Road, 1/10 On-Road Resistance (Ohms): 0.00043 Continuous Current: 160A Dimensions: 38.5 x 36.9 x 19.5mm Motor Limit: 4.5T Weight (w/o Wires & Fan): 45g BEC (Adjustable): 6.0V - 7.4V / 5A Power Wires: 13-Gauge Silicone Cooling Fan: Optional In the Box: (1) Reedy Blackbox 610R 2S Competition ESC (1) Blackbox PROgrammer2 (1) External Capacitor Board (1) Instruction Manual Race-Proven Performance & Customization at Your Fingertips! Whether you're competing in stock or modified racing, the Reedy Blackbox 610R delivers incredible throttle precision, braking control, and power efficiency. With full tuning capabilities via the Blackbox PROgrammer2, you can tailor every aspect of your ESC to fit your driving style and track conditions. 🔥 Upgrade today and experience championship-winning control with the Reedy Blackbox 610R! 🏁💨  

Read more less

Reedy Zappers SG6 4800mAh 135C 7.6V 2S Shorty HV-LiPo – Maximum Power & Consistency! Upgrade your racing setup with the Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo, engineered with state-of-the-art LiPo chemistry to deliver unmatched power, reliability, and cycle life. Designed for elite on-road and off-road competition, the SG6 series enhances power output, lowers internal resistance, and increases durability, ensuring consistent voltage and high performance from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Delivers higher voltage, lower IR, and improved power output.✅ Updated Formulation & Construction – Increases efficiency, reliability, and durability.✅ Heavy-Duty Internal Structure – Designed for high-discharge applications in intense racing conditions.✅ High Capacity (4800mAh) with 135C Discharge Rate – Provides maximum power output and runtime.✅ Inherently Flat Discharge Curve – Maintains higher voltage deeper into the race for consistent power delivery.✅ Durable Hard Case with Low-Resistance Connectors – Prevents damage while minimizing power loss.✅ ROAR & BRCA Approved – Legal for competition use in sanctioned events. Next-Level Performance for Serious Racers! 🏁 Why Choose the Reedy Zappers SG6? 7.6V (HV-LiPo) design allows charging up to 4.35V/cell for maximum performance. Higher voltage retention throughout the race results in stronger acceleration and top-end speed. Ideal for both on-road & off-road applications, including 1/8 eBuggy and 1/10 racing. Proven reliability & extended cycle life for long-lasting, race-winning performance. 🔥 Power your RC car with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4800mAh Voltage: 7.6V (2S) Max Charge Rate: 9.6A Discharge Rate: 135C Dimensions: 96mm x 47mm x 25.1mm Weight: 207g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4800mAh 135C Shorty is the go-to choice for serious racers, offering high voltage, low resistance, and superior durability. Whether you need explosive acceleration, extended run time, or consistent power delivery, this battery is engineered to give you the winning edge. 🔥 Upgrade your setup today and experience next-level performance with Reedy Zappers SG6! 🏁💨

Read more less

Team Associated RC10B7 Gear Differential Case and Cross Pins – Genuine Replacement Set 🔧 Keep your drivetrain running smooth with the Team Associated RC10B7 Gear Differential Case and Cross Pins. Designed specifically for the RC10B7 platform, this factory replacement ensures durability, precise fitment, and optimal performance during high-stress racing conditions. 🔧 Key Features: ✅ Direct replacement for worn or damaged diff internals✅ Precision-molded gear diff case for reliable operation✅ Includes cross pins for proper gear alignment✅ Maintains stock performance and reliability 📦 Includes: (1) Gear Differential Case (4) Cross Pins ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Stay race-ready.Restore your buggy's performance with this genuine RC10B7 differential case and cross pin set from Team Associated. 🏁  

Read more less

1up Racing Shock & Diff Oil Carrier Bag – Trackside Tuning, Organized 🎯 Keep your oils organized and protected with the 1up Racing Shock & Diff Oil Carrier Bag — the perfect solution for racers who bring the whole tuning bench to the track. Designed to fit 12 bottles of 1up Racing Pure Silicone Oils, this carrier keeps your setup clean, efficient, and ready for any condition. 💼 Featuring rigid, oil-resistant internal dividers and a durable zip-up enclosure, this bag is built to take spills, bumps, and race day chaos in stride. A woven carry handle and bold 1up Racing logo complete the look, making this the go-to organizer for serious racers. ✨ Key Features: 🧴 12 Dedicated Bottle Slots – Fits 41x41x105mm bottles like a glove🧽 Rigid Oil-Resistant Dividers – Won’t break down or absorb spills🧵 Zipper Enclosure – Securely seals your oils for transport🪢 Woven Carry Handle – Easy grab-and-go for race day🔥 Signature 1up Racing Look – Clean and professional trackside presence 📏 Dimensions: Individual Slots: 41mm x 41mm x 105mm\ Overall Bag Size: 22 x 17 x 12cm 🧰 Stay Dialed In – Wherever You Race From shock tuning to diff balancing, this carrier keeps your essential fluids safe, sorted, and spill-proof. No more mess. No more guesswork. 💡 Stay Race-Ready – Grab the 1up Oil Carrier Bag Today!

Read more less

1up Racing Premium R/C Solder – 12g Tube Achieve flawless electrical connections with 1up Racing Premium R/C Solder, designed for RC cars, drones, and high-performance electronics. Engineered to soak effortlessly into high-strand count wire, this solder ensures maximum conductivity and durability for even the most demanding applications. Key Features: ✅ Ultra-High Purity Formula – Provides strong, reliable, and long-lasting connections.✅ Easy to Work With – Flows smoothly into high-strand count wire for seamless soldering.✅ High-Performance Under Extreme Conditions – Proven to withstand heat, vibration, and high-current applications.✅ Bright & Shiny Finish – Dries with a clean, professional look.✅ Convenient 12g Tube – Perfect for pit bags and workbenches. The Must-Have Solder for Every Racer & Hobbyist! Whether you're building, repairing, or upgrading, 1up Racing Premium R/C Solder ensures top-tier performance and reliability in every connection. 🔥 Get yours today and experience the 1up Racing difference! 🏁💨

Read more less

Pro-Line Air Force 2 HD Pre-Cut 1/10 Buggy Wings (7") – PRO6405-17🏁 Track-Tested. Pre-Cut. Race-Ready. Dominate the competition with Pro-Line's Air Force 2 HD Wings—engineered for peak performance and built for battle. These 7" wide pre-cut Lexan wings are designed using advanced CAD technology for maximum durability and aerodynamic efficiency. The curved corners reduce cracking and improve airflow, while the extra tire clearance keeps you fast through the corners. ✅ Fits most 1/10 scale buggies✅ 7" wide for balanced downforce✅ Pre-cut for quick installation✅ Made from durable medium-thickness Lexan✅ Crystal clear and paint-ready✅ Made in the USA 🇺🇸 📦 Includes:(2) Pre-Cut Air Force 2 HD Buggy Wings (7") 💡 Pro Tip: Pair with your favorite paint job and dial in your aero for serious race day results.

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

The JConcepts S2 body for the XRAY XB2 2025 is a championship-inspired design born from victory at the 2015 World Championships. Originally created for high-grip carpet and turf, the S2 has become a go-to shell for racers demanding low-profile aerodynamics, aggressive styling, and razor-sharp performance. 🔧 Key Features:• Sleek, low-drag profile – optimized for speed and handling• Aggressive cab-forward design with recessed scoop• Rear sidepod scoops – trim for airflow or leave for added downforce• Integrated center fin for high-speed stability• Covers spur gear guard with a snug fit• Tight chassis contour and chamfered detailing• Includes two 6.5” Carpet | Turf | Dirt wings• Molded from clear polycarbonate with overspray film• Includes window masks and JConcepts decal sheet 🇺🇸 Proudly made in the USA and designed by racers for racers, the S2 brings heritage, innovation, and performance to your XB2 2025 build. 📦 Includes:(1) Clear S2 Body for XRAY XB2 2025(2) 6.5” Carpet | Turf | Dirt Wings(1) Decal Sheet(1) Window Mask Sheet 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less