⚡ Compact, Waterproof Brushed ESC for 1/16 & 1/18 Scale RC Vehicles The Hobbywing QuicRun 1625 Brushed ESC is a compact and affordable electronic speed control designed for 1/16 and 1/18 scale brushed RC vehicles. With a 25A continuous current rating, 2S-3S LiPo compatibility, and Forward/Reverse/Brake operation, it's a versatile choice for mini on-road cars, off-road vehicles, buggies, and monster trucks. Its waterproof and dustproof construction makes it suitable for a wide variety of driving conditions, while simple jumper-based programming and automatic throttle calibration make setup quick and straightforward. ⚙️ About the QuicRun 1625 🔋 2S-3S Brushed Power The QuicRun 1625 supports 2S-3S LiPo or 6-9 cell NiMH batteries and is designed for compatible 280, 370, and 380-size brushed motors. With 25A continuous and 100A peak current capability, it provides dependable power for smaller-scale RC applications. 💧 Waterproof & Dustproof A waterproof and dustproof design helps protect the ESC when running through wet or dirty conditions, making it well suited for both on-road and off-road mini RC vehicles. 🔧 Simple Setup & Programming Automatic throttle range calibration simplifies initial setup, while jumper-based parameter adjustment eliminates the need for a separate programming device. Forward, Reverse, and Brake operation provides the functionality needed for recreational and general-purpose RC driving. 🛡️ Built-In Protection Multiple electronic protection systems help protect the ESC, battery, and electronics during operation, including low-voltage cutoff, over-temperature protection, throttle signal loss protection, and over-voltage protection. 🔧 Features Designed for 1/16 and 1/18 scale RC vehicles Compatible with brushed motors 25A continuous current 100A peak current Supports 2S-3S LiPo batteries Supports 6-9 cell NiMH batteries Waterproof and dustproof construction Compact design with built-in capacitor module Forward/Reverse/Brake running mode Automatic throttle range calibration Easy jumper-based parameter adjustment 5V/1A linear BEC Low-voltage cutoff protection Over-voltage protection Over-temperature protection Throttle signal loss protection 📦 Includes (1) Hobbywing QuicRun 1625 1/18 Scale Brushed ESC 📊 Specifications Specification Details Part Number 30120000 ESC Type Brushed Application 1/16 & 1/18 Scale Continuous Current 25A Peak Current 100A Resistance 0.003Ω Battery Compatibility 2S-3S LiPo / 6-9 Cell NiMH BEC Output 5V / 1A BEC Type Linear PWM Frequency 1kHz Running Mode Forward / Reverse / Brake Dimensions 34 x 24 x 14mm Weight 23.5g 🔩 Motor Limits 2S LiPo / 6-Cell NiMH 280, 370, or 380-size brushed motor Less than 30,000 RPM @ 7.2V 3S LiPo / 9-Cell NiMH 280, 370, or 380-size brushed motor Less than 20,000 RPM @ 7.2V 🚗 Application Suitable for compatible: 1/16 scale on-road and off-road vehicles 1/18 scale on-road and off-road vehicles Mini buggies Mini monster trucks Other compatible brushed RC platforms

Read more less

🏁⚡ Limited-Edition Team-Tuned SPEC Racing Motor The Hobbywing SPEC Brushless Motor Team Tuned [TT] Limited Edition is a specially prepared 21.5T competition motor built for racers looking for professionally tuned stock-class performance. Based on Hobbywing's proven G4R platform, each Team Tuned motor is individually inspected and assembled using the same techniques applied to Hobbywing team race motors used in World and National Championship competition. This limited-edition version features a non-epoxy stator designed to comply with updated ROAR rules regarding epoxy usage and comes equipped with a high-torque tuning rotor. 🏎️ About the Team Tuned [TT] Motor 🔧 Team Tuned Preparation Each TT motor is inspected and assembled by Hobbywing's Matthew Gonzales using the same preparation techniques applied to Hobbywing team race motors. This additional attention to assembly and setup is intended to provide racers with a competition-focused motor straight out of the package. 💪 High-Torque Rotor A high-torque tuning rotor comes pre-installed, giving the motor a torque-focused configuration without requiring racers to purchase and install the rotor separately. 🏁 ROAR-Oriented G4R Platform The TT Limited Edition is based on the Hobbywing G4R motor but uses a non-epoxy stator to meet updated ROAR regulations regarding stator epoxy usage. 🔧 Features Limited-edition Team Tuned [TT] competition motor 21.5T SPEC racing configuration Based on the Hobbywing G4R platform Individually inspected and assembled Prepared using Hobbywing team motor techniques Non-epoxy stator Designed around updated ROAR epoxy regulations High-torque tuning rotor pre-installed Competition-focused stock/spec racing motor 📦 Includes (1) Hobbywing SPEC Team Tuned [TT] Limited Edition Brushless Motor – 21.5T 📊 Specifications Specification Details Part Number 30401747 Series Team Tuned [TT] Limited Edition Motor Platform Hobbywing G4R Turns 21.5T Motor Type Brushless Configuration Team Tuned Stator Non-Epoxy Rotor High-Torque Tuning Rotor Application SPEC / Stock Racing ⚠️ Notes This is a limited-edition Team Tuned G4R-based motor, not the newer G5 platform. The supplied product information specifically identifies this version as 21.5T TT. The non-epoxy stator was incorporated to address updated ROAR rules regarding epoxy usage. Availability may be limited due to the special Team Tuned production run.    

Read more less

🏁⚡ High-RPM Competition Performance for 13.5T Stock Racing The Hobbywing XeRun V10 G5 Competition Stock 13.5T Speed Brushless Motor is engineered for racers looking for maximum speed and efficiency from their stock-class power system. The fifth-generation V10 platform delivers increased output power, improved thermal performance, optimized weight distribution, and extensive tuning capability for serious competition use. This Speed configuration is designed to favor higher-RPM performance and top-end power, making it particularly well suited to larger, faster layouts where carrying speed and maximizing straightaway performance are critical. 🏎️ About the XeRun V10 G5 🚀 13.5T Speed Performance Rated at 4000Kv, the Speed version of the 13.5T G5 is designed to emphasize RPM and top-end performance. Compared with the Torque configuration, it's an excellent choice for racers competing on faster layouts where maintaining momentum and maximizing speed are priorities. 🎯 Advanced Tunability Adjustable Hall timing and Hall sensing distance allow racers to fine-tune the motor's throttle response and power characteristics. This additional adjustability makes it possible to optimize performance around gearing, ESC settings, track conditions, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 motor structure improves heat dissipation and overall efficiency compared with the previous generation. Its lightweight construction and optimized center of gravity also help reduce unnecessary weight while maintaining consistent performance throughout demanding race conditions. 🔧 Modular Construction A modular design makes servicing and maintenance easier, helping racers keep the motor operating at peak performance throughout the racing season. 🔧 Features Competition-spec 13.5T sensored brushless motor Speed configuration for high-RPM performance 4000Kv rating Increased output power over the previous generation Improved efficiency and thermal performance Lightweight design with optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Advanced cooling design with improved heat dissipation Modular construction for easier maintenance 2-pole competition motor design Designed for 2S operation 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 13.5T Speed (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401762 Motor Series XeRun V10 G5 Version Speed Motor Type Sensored Brushless Turns 13.5T Kv Rating 4000Kv Input Voltage 2S Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 13.5T stock-class 1/10-scale racing, particularly on medium-to-large layouts where higher RPM and top-end speed are preferred. ⚠️ Notes This is the Speed version of the 13.5T XeRun V10 G5. The Speed version is rated at 4000Kv, compared with 3900Kv for the 13.5T Torque version (30401763). For tighter, more technical layouts where acceleration is the priority, consider the Torque version. Always verify your racing organization's motor regulations before competition use.    

Read more less

🏁⚡ Competition Stock Power with Torque-Focused Performance The Hobbywing XeRun V10 G5 Competition Stock 13.5T Torque Brushless Motor delivers the latest generation of Hobbywing stock racing performance. Developed to the same demanding standards as Hobbywing's team competition motors, the G5 offers increased output power, improved efficiency, better thermal performance, and optimized weight distribution compared to the previous generation. The Torque configuration emphasizes strong acceleration and responsive power delivery, making it an excellent choice for racers who need punch coming out of corners and consistent performance on technical layouts. 🏎️ About the XeRun V10 G5 💪 13.5T Torque Performance Rated at 3900Kv, this 13.5T Torque version provides a strong combination of speed and acceleration for competitive stock racing. Hobbywing offers the G5 in both Speed and Torque configurations, allowing racers to choose a motor better suited to their track layout, available grip, and preferred power delivery. 🎯 Advanced Tunability Adjustable Hall timing and Hall sensing distance give racers greater control over the motor's characteristics. These adjustments allow the motor to be fine-tuned for throttle response and power delivery based on gearing, ESC settings, track conditions, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 structure provides improved heat dissipation and efficiency to help maintain consistent performance throughout a race. Its lightweight construction and optimized center of gravity also help reduce unnecessary weight while keeping mass properly positioned in the chassis. 🔧 Modular Construction A modular design makes routine maintenance and servicing easier, allowing racers to keep the motor in peak condition throughout the racing season. 🔧 Features Competition-spec 13.5T sensored brushless motor Torque configuration for strong acceleration and punch 3900Kv rating Increased output power over the previous generation Improved efficiency and thermal performance Lightweight design with optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Available in Speed and Torque configurations Advanced cooling design for improved heat dissipation Modular construction for easier maintenance 2-pole competition motor design 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 13.5T Torque (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401763 Motor Series XeRun V10 G5 Version Torque Motor Type Sensored Brushless Turns 13.5T Kv Rating 3900Kv Input Voltage 1–3S Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 13.5T stock-class racing where strong acceleration and responsive torque delivery are desired, including compatible 1/10-scale off-road racing applications. ⚠️ Notes This is the Torque version of the 13.5T XeRun V10 G5. Hobbywing also offers a Speed version for racers looking for different power characteristics based on track size and grip level. Verify your racing organization's motor and ESC regulations before competition use.    

Read more less

🏁⚡ Competition-Level Torque & Efficiency for Stock Class Racing The Hobbywing XeRun V10 G5 Competition Stock 17.5T Torque Brushless Motor is engineered for racers looking for maximum performance from a stock-class power system. Building on the proven V10 platform, the fifth-generation G5 features increased output, improved efficiency, optimized weight distribution, and enhanced cooling for consistent performance throughout demanding race conditions. This Torque version is tuned to emphasize strong low-end and mid-range power delivery, making it an excellent choice for technical layouts where acceleration and drive out of corners are critical. 🏎️ About the XeRun V10 G5 💪 Torque-Tuned 17.5T Performance The Torque version of the V10 G5 is designed for racers who prioritize punch and acceleration. Its power characteristics make it especially well suited to technical tracks and layouts where quickly building speed out of corners can provide an advantage. 🎯 Advanced Motor Tuning Adjustable Hall timing and Hall sensing distance give racers additional control over motor characteristics. These adjustments allow experienced racers to fine-tune throttle response and power delivery to better suit track conditions, gearing, ESC settings, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 structure improves heat dissipation and operating efficiency while optimizing the motor's center of gravity. Better thermal management helps maintain more consistent performance throughout a race while the lightweight construction minimizes unnecessary weight. 🔧 Racer-Friendly Modular Construction A modular design simplifies disassembly and maintenance, making it easier to inspect and service the motor between race weekends while keeping the power system operating at its best. 🔧 Features Competition-spec 17.5T sensored brushless motor Torque-tuned version for strong acceleration and punch Increased output power over the previous generation Improved efficiency and thermal performance Lightweight construction Optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Advanced cooling and heat dissipation Modular construction for easier maintenance 2-pole competition motor design Includes sensor cable 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 17.5T Torque (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401764 Motor Series XeRun V10 G5 Version Torque Motor Type Sensored Brushless Turns 17.5T Kv Rating 3000Kv Input Voltage 1–3S LiPo Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 17.5T stock-class RC racing, particularly applications where strong torque and acceleration are preferred, including: 1/10 2WD Buggy 1/10 4WD Buggy 1/10 Stadium Truck 1/10 Short Course Other compatible 17.5T stock racing classes ⚠️ Notes This is the Torque version of the 17.5T V10 G5. For racers choosing between Hobbywing's Speed and Torque versions, the Torque model favors stronger acceleration and low-to-mid RPM power, while the Speed version is intended to favor higher-RPM performance. Always verify your track or racing organization's motor rules before competition use.  

Read more less

⚡ Hobbywing XR10 Pro G3X Stock Spec 160A Sensored ESC – Titanium Grey 🏁 Premium Stock-Class ESC for Competitive 1/10 Racing! 🔥 Engineered for top-level stock racing, the Hobbywing XR10 Pro G3X Stock Spec ESC delivers ultra-efficient power, rock-solid reliability, and elite tuning control. Designed with Hobbywing's proprietary trade secret technology, this ESC handles extreme current loads with minimal heat, ensuring consistent, winning performance lap after lap. ✨ Key Features: ⚡ 160A Continuous Current – High-output ESC built for 1/10 Stock-Class domination🧊 Trade Secret Technology – Reduces heat generation and boosts electrical efficiency🎛️ 3 Customizable Racing Profiles – Fine-tune settings for track-specific control🔁 Variable Frequency PWM & Brake Control – Refined throttle and braking precision📊 Built-In Data Logging – Monitor key performance metrics via OTA or LCD box🚗 Disc Brake Mode – For tighter, more aggressive braking response🧠 Softening Function – Smoother throttle ramping and enhanced control🔐 Full Suite of Protections – Low-voltage, ESC temp, motor temp, fail-safe signal loss📦 Includes Internal & External Switch Options for flexible installs 📦 What’s in the Box? ✔️ (1) Hobbywing XR10 Pro G3X Stock Spec 160A ESC✔️ (1) Cooling Fan✔️ Factory Decals & Accessories✔️ Product Manual 📊 Specifications: Application: 1/10 Stock Racing (Off-Road, On-Road, F1, Drift, Rally) Motor Type: Sensored & Sensorless Brushless Input Voltage: 2S LiPo Only Continuous Current: 160A Peak Current: 1200A Dimensions: 35 x 33.6 x 30.3mm Weight: 101.5g BEC Voltage: 5V–7.4V Adjustable BEC Current: 5A Continuous Motor Limit: 540-Size (3650) Motor Programmable: Yes (via optional OTA Module or LCD Program Box Pro) Connectors: Solder Tabs (Motor & Battery) ⚠️ Important Tech Notes: 🔧 Programmer Required for data logging:Use Hobbywing OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) 🛑 No Reverse Polarity Protection: Reversing battery connections will damage the ESC. Double-check wiring before powering on. 🏆 Trusted by Champions — Built for Winners Whether you're racing 1/10 buggy, touring, drift, or F1, the XR10 Pro G3X Stock Spec gives you the smooth throttle feel, braking confidence, and tuning options needed to take the top step of the podium. 💨 Unlock your potential. Run the ESC the pros trust.  

Read more less

Hobbywing Multifunction LCD Program Box PRO (G3) – Advanced ESC Tuning & OTA Programming! 🔥 The Ultimate ESC Programming Tool for Hobbywing Brushless ESCs! 🚗💨 The Hobbywing Multifunction LCD Program Box PRO (G3) is a versatile and user-friendly programming tool designed to fine-tune, upgrade, and optimize Hobbywing ESCs. With an easy-to-read LCD interface, USB-C connectivity for PC users, and built-in OTA Bluetooth programming for iOS & Android devices, this program box provides quick and efficient ESC adjustments whether you're at home or at the track. 🏆 Compatible with Platinum, XeRun, EzRun MAX, and SEAKING PRO ESCs, this device makes real-time tuning easier than ever! ✨ Key Features: • 📟 LCD Interface for Easy ESC Programming – Quickly adjust ESC settings with a user-friendly display • 💻 USB-C Connectivity for PC Users – Upgrade ESC firmware & fine-tune parameters online • 📡 Built-in OTA Bluetooth Programmer – Wirelessly adjust ESC settings via iOS & Android devices • 🔌 Compact & Portable Design – Lightweight and perfect for field tuning • ⚡ Compatible with Multiple Hobbywing ESCs – Works with Platinum, XeRun, EzRun MAX, SEAKING PRO, and select QUICRUN ESCs 📊 Specifications: • Dimensions: 5.24 x 3.44 x 1.75 in • Weight: 85g • Input Voltage: DC 5V-12.6V • Compatibility: ◦ Platinum Series Brushless Aircraft ESCs ◦ XeRun & EzRun MAX Series (V2.0 and later) ◦ Platinum & SEAKING PRO Series ◦ Select QUICRUN ESCs (Check ESC requirements) • Programming Methods: ◦ LCD interface for on-the-go tuning ◦ USB-C for firmware updates & adjustments (PC only) ◦ OTA Bluetooth programming via iOS & Android devices 📌 Note: A separate battery is needed to power this program box if the ESC does not have a built-in/external BEC. 📦 What’s in the Box? ✔ (1) Hobbywing Multifunction LCD Program Box PRO (G3) 📌 Tech Note: • USB-C software works for PC users ONLY • OTA Bluetooth Programmer works for both Apple (iOS) and Android users • Check ESC specifications to ensure compatibility 🏁 Tune Your ESC Like a Pro with the Hobbywing LCD Program Box PRO! 🔥 Whether you're racing, bashing, or flying, the Hobbywing G3 LCD Program Box PRO provides quick, easy, and precise ESC tuning at your fingertips. 💨 Upgrade today and take full control of your Hobbywing ESC settings! ⚙️📡🏁

Read more less

  📱 Wireless Tuning. Total Control.Ditch the cords and take full control of your ESC with the Hobbywing OTA Programmer. Designed to work with select Xerun, EzRun, Platinum, and Seaking ESCs, this compact module connects wirelessly to your smartphone using the HW Link App—giving you the power to fine-tune ESC settings, record real-time data, and even update firmware on the go. 🎯 Key Features: Real-time wireless tuning via the HW Link App Graphical interface with drop-downs and sliders for easy setup Built-in data logging and memory storage Seamless Bluetooth transmission One-touch factory reset Compact, lightweight design 📐 Specifications: Voltage: 5–12.6V Bluetooth Version: ≤ 4.0 Range: 0–3m (open field) Size: 30.0 x 25.5 x 8.5mm Weight: 10.2g 💡 Note: Compatible only with supported ESCs. Please check your ESC manual for compatibility. Download the HW Link V2 App for optimal performance. 🎮 Your ESC. Your Way.Whether you're dialing in race settings or checking temps after a bash session, this OTA module makes managing your ESC easier, faster, and smarter.

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

  The Hobbywing QuicRun Fusion FOC 2300Kv 2-in-1 ESC & Motor System is a unique ground-up design, packed with technology specific for scale trucks and rock crawlers. Features: Integrated design of Hobbywing's patent technology: The integrated design of the ESC makes the size similar to a 540 motor, and the overall weight is only 209g. This makes the layout and wiring of the car simpler, while creating a cleaner overall chassis that also leaves more room for an interior.  Intelligent Torque Output & Speed Closed-loop Control for Easy Control: The Fusion system combined with Intelligent Torque output and closed-loop speed control means the power system will maintain the motor’s Torque level and RPM as the vehicle conditions change. Uphill, downhill, under load, the intelligent output torque makes the operation more consistent. Note: If the “RPM/Throttle Matching” is set to “Disabled”, no intelligent torque output & speed closed-loop control, just like the brushed system. FOC (Field-oriented Control) for Super Linearity & HighTorque & Extreme Mute: The Fusion system adopts FOC driving mode so low speed torque is strong, and it runs smoothly at very low speed. Moreover, the motor is extremely silent when it is running. The driving noise which annoys the driver disappears. It is the best choice for a scale rock crawler. Waterproof: Applicable to All Weather & Track Conditions: The IP-67 waterproof system has excellent waterproof and dustproof performance. You can easily drive in the mud, sand, ice, snow and water. High Driving Efficiency for Long Battery Life: FOC offers high efficiency and reduced heat, dramatically extending runtime. Benefitting from a sine wave driving mode, the motor runs silently and softly. Professional Drag Brake Adjustments & Super Parking Capacity: 8 levels of drag brake force and 9 settings of drag brake rate allow a high level of tuning for different conditions and driver preference. The maximum drag brake force is about twice that of an ordinary brushless system of the same size, providing super strong parking capacity on a steep slope. Advanced and Secure Electronic Switch: Compared to standard on/off switches, the dust, dirt, and waterproof electronic switch housing ensures a long reliable life for your power system, and will not suffer from the problems that will damage a mechanical switch.  Specifications: Motor Kv: 2300Kv Continuous Current: 60AShaft Diameter: 3.175mm Peak Current: 200A Input Voltage: 2-3S LiPo/6-9 Cell NiMH BEC Output: 6V/7.4V adjustable, 4A continuous (switch mode) Input Wires: 14awg, 330mm long Input Connectors: XT60 (factory installed) Port Programming: Independent programing interface (switch position) Size: 37x58mm Weight: 209g w/wires Includes: (1) FOC motor w/ built-in ESC & Factory installed XT60 plug

Read more less

🔥 Smaller Package. Big-Time Performance.The Hobbywing EZRun MAX10 G2 80A ESC is the perfect blend of power, precision, and protection for 1/10 on-road cars, buggies, lightweight SCTs, and trucks. Built with smart sensored brushless tech, this ESC delivers buttery smooth throttle response and a huge performance boost—up to 25% more speed when paired with the Hobbywing 3652 G3 motor! 🧠 Packed with Features: 80A continuous / 520A burst current IP64-rated waterproofing Supports turbo timing up to 32° Smart fan control (fan runs only when needed) 74% more capacitor capacity than previous MAX10 Overheat protection & smart freewheeling for efficiency Real-time data monitoring and data logging (with optional OTA module) 📏 Specifications: Battery Input: 2S–3S LiPo BEC: 6V/7.4V @ 5A (Switch-mode) Motor Limit: 2S: <6000Kv 3S: <4200Kv (3652 size motor) Dimensions: 53 x 39.5 x 37.2mm Weight: 120g (w/ wires) Application: 1/10 On-Road, Buggy, Light SCT, Monster Truck Cooling Fan: Included, BEC powered 📦 Includes: (1) EZRun MAX10 G2 80A ESC Hobbywing Decal User Manual ⚙️ Need control and cool temps on your 2S/3S setup?The MAX10 G2 80A delivers elite performance with smart tech to back it. Race harder, run cooler, and go faster—without compromise.

Read more less

The Hobbywing Xerun XR8 Plus G2S is a next-generation 1/8-scale competition ESC built for elite on-road, off-road, and truggy racing. Designed to outperform at the highest levels, the G2S delivers massive power, extreme tuning flexibility, and advanced protection systems for serious racers pushing the limits. With support for up to 48° of boost and turbo timing, the XR8 Plus G2S unlocks exceptional top-end speed and acceleration. When paired with optional Hobbywing 4268 or 4274 G3 motors, racers can see up to a 50% increase in maximum speed, making this ESC a true weapon on high-speed tracks. Race-Proven Power & Cooling A highly efficient heat dissipation system combined with a durable frameless cooling fan keeps temperatures under control during long mains. Advanced capacitor thermal protection and real-time data monitoring help protect your electronics when running aggressive setups. Advanced Tuning & Data Control The XR8 Plus G2S offers multiple programmable parameters, an RPM speed limit function, and real-time data recording, allowing racers to precisely tailor power delivery and analyze performance. Programming is simple using the onboard SET button, LCD Program Box, or OTA Programmer. Built for Reliability Internal reverse polarity protection, a powerful switch-mode BEC, dust-resistant design, and ultra-soft 11AWG silicone wires ensure consistent performance even under extreme race conditions. Features Supports up to 48° boost & turbo timing Efficient heat dissipation with lower temperature rise Durable frameless cooling fan Internal reverse polarity protection Real-time data recording RPM speed limit function Multiple programmable parameters Capacitor thermal protection High-output adjustable BEC Excellent dustproof performance Ultra-soft 11AWG silicone wire Customized solder tabs for easy installation Specifications ESC Scale: 1/8 Waterproof: No Continuous / Peak Current: 200A / 1080A Input Voltage: 2–6S LiPo BEC Output: 6–8.4V Adjustable BEC Current: 6A Continuous / 15A Peak (Switch-Mode) Programming: SET Button / LCD Program Box / OTA Programmer Firmware Upgrade: Supported Dimensions: 56.1 × 42.1 × 38.5mm Weight: 122g (with wires) Applications: SL & SD Brushless Motors Vehicle Types: 1/8 On-Road, Off-Road, Truggy Racing Recommended Motor Pairings 4S LiPo: 4268 / 4274 ≤ 3000KV 6S LiPo: 4274 ≤ 2400KV Cooling Fan Size: 30 × 30 × 10mm Voltage Range: 5–8.4V Important Note Use factory or team-recommended settings and always monitor operating temperatures. Improper setup may cause damage to the ESC or motor.

Read more less

Hobbywing Xerun XR14 Sensored Brushless ESC/2848SD Motor Combo (2800kV) 🔥 High-Performance Brushless ESC & Motor Bundle! 🚗💨 Elevate your 1/14 scale on-road and off-road performance with the Hobbywing Xerun XR14 Sensored Brushless ESC & 2848SD Motor Combo (2800kV)! This combo pairs a competition-grade ESC with a high-efficiency brushless motor, delivering smooth throttle response, powerful acceleration, and superior durability. 🏆 Whether you're racing in Blinky or Boost formats, the sensored system ensures precise control, low-speed smoothness, and high-speed stability—making it the perfect choice for serious RC racers. ✨ Key Features: ⚡ 70A Continuous Output Current – Stable and reliable power under intense race conditions 🛠️ 26 Adjustable Parameters – Fine-tune throttle, braking, boost/turbo timing, and more 🔥 Full-Metal Heat Sink Case – Optimized cooling for extended performance 🔋 Reverse Polarity & Thermal Protection – Prevents damage from incorrect battery connections 🛞 4-Pole Motor Design – Ultra-smooth acceleration and efficient power delivery 📊 Built-In Data Recording – Access performance stats via the Hobbywing Link App 💨 Adjustable PWM & Brake Frequency – Customizable for both on-road and off-road racing 🏁 IP5X Dustproof Motor Protection – Designed for durability in harsh environments 📦 What’s in the Box? (1) Hobbywing Xerun XR14 Sensored Brushless ESC (1) Hobbywing Xerun 2848SD 4-Pole 1/14 Brushless Motor (2800kV) 🔥 (1) Cooling Fan 🌀 Factory Decals & Accessories Product Manual 📖 📊 ESC Specifications: Suggested Applications: 1/14 On-Road & Off-Road Racing, 1/12 & 1/10 Light Load Vehicles Motor Type: Sensored/Sensorless Brushless Input Voltage: 2S LiPo (7.4V) Continuous Current: 70A Peak Current: 300A Motor Limits: 540-Size (>6000kV or 8.5T) BEC Voltage: 6V/7.4V at 4A Battery & Motor Connectors: Solder ⚡ Motor Specifications: Motor Type: Sensored Brushless kV Rating: 2800kV Input Voltage: 2S-3S LiPo (7.4V-11.1V) Adjustable Timing: 20-40° Diameter x Length: 1.12 x 1.89 in (28.5 x 48mm) Shaft Diameter: 0.13 in (3.175mm) Weight: 3.52 oz (100g) Poles: 4 Application: 1/14 or 1/12 On-Road & Off-Road 📌 Tech Note: The OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) is required to access data logging for throttle, voltage, temperature, RPM, vehicle speed, and more. 🏁 Take Your Racing to the Next Level! 🔥 Whether you're fine-tuning your setup for maximum efficiency or pushing for top-speed dominance, the Hobbywing Xerun XR14 ESC & 2848SD Motor Combo delivers race-winning performance and ultimate reliability. 💨 Upgrade today and dominate the track with Hobbywing! 🏆🏁  

Read more less

Simplify your crawler build while gaining incredible control with the Hobbywing QuicRun Fusion SE FOC 2-in-1 System. This integrated ESC and brushless motor combo delivers ultra-smooth throttle response, strong low-speed torque, and a compact installation perfect for modern scale crawlers and trail trucks. Powered by FOC (Field-Oriented Control) technology, the Fusion SE offers unmatched smoothness and precision when navigating technical terrain. 🧗 Built for Crawling Performance The Fusion SE is designed specifically for 1/10 rock crawlers and trail trucks, delivering exceptional low-speed control and smooth startup behavior. FOC driving mode produces strong torque and precise throttle modulation, giving you the confidence to tackle steep climbs, tight rock sections, and technical obstacles. Integrated cruise control and hill descent features further improve drivability on difficult terrain. ⚡ Compact 2-in-1 Design By combining the ESC and motor into a single unit, the Fusion SE dramatically simplifies wiring and installation. Benefits include: Reduced wiring clutter Easier chassis layout Lower overall weight Cleaner installation Perfect for scale builds where space and simplicity matter. 🌧 Waterproof & Trail Ready With an IP67 waterproof rating, the Fusion SE is ready for harsh outdoor environments. Mud, snow, water crossings, and dusty trails are no problem for this sealed electronics system. 🏁 Features Integrated ESC and motor design Advanced FOC technology for ultra-smooth control Excellent low-speed torque and throttle precision Sine wave drive for quieter and more efficient operation Intelligent torque output and speed control Cruise control and hill descent capability Adjustable active drag brake Multiple protection systems for reliability IP67 waterproof and dustproof design Compatible with Hobbywing LED program box 📦 Includes (1) Hobbywing QuicRun Fusion SE FOC 2-in-1 ESC & Motor System (1200kV) 📊 Specifications Application: 1/10 Rock Crawler / Trail Truck Motor Type: Brushless (Integrated ESC) kV Rating: 1200kV Voltage Input: 2–3S LiPo / 6–9 Cell NiMH Continuous Current: 40A Motor Diameter: 36mm Motor Length: 58.1mm Shaft Diameter: 3.175mm Shaft Length: 16.5mm Motor Poles: 4 Waterproof Rating: IP67 Connector: XT60 Programming: Hobbywing LED Program Box (sold separately) Weight: 201g (including wires & connectors) If you're building a crawler that demands smooth control, compact electronics, and reliable trail performance, the Hobbywing Fusion SE is one of the best plug-and-play systems available.

Read more less

Dominate the track with the Hobbywing XeRun XR8 Pro G3 ESC & 3652SD Motor Combo. Designed for serious racing performance, this advanced electronics bundle delivers incredible power, precision tuning, and durability for 1/10 Short Course trucks and select 1/8 race applications. With cutting-edge smart technologies, customizable tuning options, and industry-leading reliability, the XR8 Pro G3 system gives racers the performance and control needed to stay ahead of the competition. ⚡ Advanced Smart Technology The XR8 Pro G3 introduces Smart Freewheeling technology, improving drive efficiency while reducing ESC temperatures by up to 59°F compared to previous generations. With Boost and Turbo Timing up to 48°, racers can unlock up to 50% more performance when paired with Hobbywing G3 motors. A unique dual brake system with disc brake simulation provides extremely smooth, linear braking—similar to real vehicle braking systems—for superior control during corner entry. 🎛 Fully Adjustable Performance The ESC includes 32 adjustable parameters, allowing racers to fine-tune everything from throttle response to timing. Three built-in racing profiles make setup fast and easy: Zero Timing / Blinky Mode Off-Road Racing Mode On-Road Racing Mode Programming can be done using: LCD Program Box Pro OTA Programmer HW LINK mobile app Firmware updates and data logging are also supported. 🛡 Durability & Protection Built for demanding racing environments, the XR8 Pro G3 includes multiple protection systems: Reverse polarity protection Capacitor thermal protection IP5X dust resistance Intelligent frameless cooling fan Ultra-soft 11AWG silicone wiring These features ensure reliable performance even under intense racing conditions. 🏁 Features Smart Freewheeling technology for improved efficiency Up to 48° Boost and Turbo timing adjustment Dual brake system with disc brake control 32 adjustable parameters for advanced tuning Three preconfigured racing profiles Reverse polarity protection Capacitor thermal overload protection IP5X dustproof rating Intelligent frameless cooling fan Firmware updates and data logging via HW LINK 📦 Includes (1) XR8 Pro G3 Sensored Brushless ESC (1) 3652SD Sensored Brushless Motor (4500kV) Product Manual 📊 ESC Specifications Input Voltage: 2-4S LiPo Continuous Current: 200A Peak Current: 1080A BEC Voltage: 6V – 7.4V BEC Current: 6A Continuous Dimensions: 54.8 × 36.8 × 38.8mm Weight: 102.8g 📊 Motor Specifications Motor Type: Sensored Brushless kV Rating: 4500kV Poles: 4 Input Voltage: 2S LiPo Diameter: 36.6mm Length: 53mm Weight: 189g Built for racers who demand maximum power, precise tuning, and race-proven durability, the XR8 Pro G3 combo is a serious upgrade for competitive SCT racing.  

Read more less

🔥 Unleash Maximum Power with Smarter Control!This powerful ESC and motor combo brings advanced sensored brushless performance to your 1/10 4WD truck or monster truck. With IP67 waterproofing, smart start-stop tech, and unmatched control feel, the MAX10 G2 + 3665SD G3 4000kV combo delivers the torque and throttle response to dominate any terrain. ⚙️ ESC Features: 140A continuous / 880A burst current Smart start-stop tech – quieter and more efficient Up to 32° Turbo Timing for max speed Waterproof & dustproof (IP67) Smart Freewheeling = Cooler temps, higher efficiency Real-time data logging & mobile app support (with optional OTA module) High-efficiency BEC: 6V/7.4V @ 5A ⚙️ Motor Specs: Kv Rating: 4000Kv 4-pole sensored brushless motor Size: 3665SD (37mm x 65.8mm) Shaft: 5mm x 16.5mm No-load Current: 8.2A Weight: 304.5g LiPo: 2–3S compatible 📦 Includes: (1) EZRun MAX10 G2 140A ESC (XT60 plug) (1) EZRun 3665SD G3 4000kV Brushless Motor (1) Sensor Cable ✅ Ideal For:1/10 4WD Short Course • Monster Trucks • Heavy Bashers 💪 More power, cooler temps, smarter features. Ready to upgrade? This Hobbywing combo is the gold standard in next-gen brushless performance.

Read more less

  The Hobbywing 1/10 ESC Switch is a direct replacement for a wide range of Hobbywing electronic speed controls that use a slider-style on/off switch. If your original switch becomes worn, damaged, or unreliable, this replacement restores proper operation with a factory-fit feel. Compatible with popular ESCs such as the Justock, XeRun 120A V2.1, QuicRun 10BL60-Sensored, and other Hobbywing 1/10 ESCs using this same switch format. Features Genuine Hobbywing replacement part Restores reliable on/off control Slider-style switch for smooth operation Compatible with multiple Hobbywing 1/10 ESC models Easy plug-in installation Compatibility Justock ESC XeRun 120A V2.1 QuicRun 10BL60-Sensored Other Hobbywing 1/10 ESCs equipped with a slider switch

Read more less

The Hobbywing XR10 Pro 1S Stock Spec is built for elite 1/12 and 1/10 stock-class racing, delivering ultra-smooth control in a compact, lightweight package. At just 31.6×25.8×16.2mm and 20% smaller than the standard XR10 Pro 1S, this ESC gives you more room and better weight balance options inside tight pan-car chassis layouts. Despite its size, it packs serious performance with advanced tuning, data logging, and a boosted internal BEC capable of running high-demand servos without an extra battery. Features Designed specifically for 1S stock-class racing Ultra-compact size (20% smaller than standard XR10 Pro 1S) Lightweight at 23.5g (w/o wires) for better chassis balance Built-in boost BEC: 6A output, adjustable 6V–7.4V Five preset racing profiles included Adjustable throttle & brake PWM frequencies for precision control Fully sensored ESC for smooth and consistent throttle feel Wireless programming via optional Hobbywing WiFi Express module Built-in electronic switch with 50,000+ cycle lifespan Data logging for motor temps, ESC temps, RPM, and more Firmware upgrade support Specifications Continuous / Peak Current: 80A / 380A Input Voltage: 1S LiPo or 3–4 cell NiMH BEC Output: 6V/7.4V @ 3A Wires: Black 14AWG, 200mm Connectors: None included Programming: LCD Program Box or WiFi Module Dimensions: 31.6 × 25.8 × 16.2 mm Weight: 23.5g (without wires) Applications: 1/12 & 1/10 on-road stock-class, 1S setups Motor Limit: ≥10.5T, 3650-size Why Racers Choose It If you’re running 1S pan cars and want elite throttle precision, small footprint, reliable cooling, and full data-logging capability, the XR10 Pro 1S Stock Spec is one of the strongest options in high-level racing.

Read more less

The Hobbywing Electronic Power Switch for Justock ESCs replaces traditional mechanical switches with a reliable, electronically controlled solution. By removing moving contacts, this EPS unit prevents failures caused by vibration, dust, oxidation, or wear — making it a more dependable option for spec racing, club racing, and general use. Designed specifically for Hobbywing Justock systems, it provides clean, consistent ON/OFF control with simple installation. Features Electronic ON/OFF switching for improved durability Eliminates issues caused by vibration or oxidized mechanical contacts Compact, lightweight, and easy to install Ideal for Justock-based 1/10 racing platforms Compatible With XeRun Justock G3 XeRun Justock G3S

Read more less

The Hobbywing Electronic Power Switch Fusion (EPS) replaces traditional mechanical on/off switches with a highly reliable, vibration-proof, electronically controlled power switch. By eliminating moving contacts, this switch prevents issues caused by oxidation, dust, moisture, or mechanical wear — delivering a more dependable solution for high-performance RC vehicles. Designed for seamless integration with Hobbywing Fusion systems, it’s a simple and effective upgrade that improves long-term durability and consistent power delivery. Features Electronic ON/OFF switching for increased reliability No mechanical contacts — eliminates issues from vibration or oxidation Compact and lightweight design Simple plug-and-play installation Ideal for crawling, trail rigs, and Fusion-equipped vehicles Compatible With Hobbywing Fusion SE Hobbywing Fusion Pro Hobbywing Fusion Elite

Read more less

Compatible with: XR10 PRO G2S Stealth / Max10 80A Keep your ESC cool under race heat with the Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan. Designed specifically for the XR10 PRO G2S Stealth and Max10 80A ESCs, this precision fan delivers high-RPM airflow with a frameless, low-drag design that maximizes efficiency and reduces noise. The G25’s compact profile fits tight racing setups while maintaining optimal heat management to protect critical electronics lap after lap. ⚡ Features: ✅ OEM replacement for Hobbywing XR10 PRO G2S Stealth and Max10 80A ESCs 🌪️ Frameless Cyclone Design provides superior airflow with minimal resistance 🔋 6 V operation for smooth, reliable cooling performance ⚙️ High-RPM brushless motor keeps ESC temperatures stable under load 💪 Compact 25×25×10 mm size for tight installations and low weight 🧠 Smart voltage guidance ensures proper pairing with your power system 📊 Specifications: Model: G25 Stealth 2510BH-6V Input Voltage: 6 V Size: 25 × 25 × 10 mm Design: Frameless Cyclone Recommended ESCs: Hobbywing XR10 PRO G2S Stealth, Max10 80A Weight: ≈ 10 g ⚙️ Voltage Selection Notes: 4–6 cell NiMH / 2S LiPo: Use included 5 V fan 7–9 cell NiMH / 3S LiPo: Use 12 V fan or power 5 V fan from receiver (+6 V) 10–12 cell NiMH / 4S LiPo: Use 12 V fan and external UBEC to power receiver 📦 Includes: (1) Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan 💡 Pro Tip:For the longest fan life, keep debris out of the blades and avoid running the fan when submerged or coated in tire compound dust — a quick blast of compressed air between runs keeps performance consistent.  

Read more less

Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo – 1/4 & 1/5 Scale Powerhouse! 🔥 The Ultimate High-Voltage Brushless Combo for Large-Scale RCs! 🚗💨 Take your 1/4 and 1/5 scale RC vehicles to the next level with the Hobbywing EZRUN MAX4 Brushless ESC & 70125 560KV Motor Combo! Designed for heavy-duty off-road trucks, truggies, and monster vehicles, this high-voltage system delivers incredible torque, extreme power, and cutting-edge protection features to handle even the most demanding terrains. 🏆 Whether you're tearing through sand, snow, mud, or rocky terrain, this sensorless brushless system provides smooth acceleration, consistent power delivery, and extreme durability for the world’s largest RC vehicles! ✨ Key Features: ⚡ Extreme 300A Continuous / 2000A Peak Current – Unleashes massive power for large-scale vehicles 🔋 6-12S LiPo Compatibility – Supports high-voltage setups for extreme performance 🔥 70125 560KV Four-Pole Brushless Motor – Delivers incredible torque and top speed 🛠️ Waterproof & Dustproof Design – Handles mud, snow, and extreme weather conditions 💨 Built-in Fireproof Circuitry – Prevents electrical damage and enhances safety 📊 Real-Time Data Logging – Monitor performance using the HW LINK app (OTA Bluetooth module required) 🔩 Ultra-Powerful Switch Mode BEC (10A Continuous, 25A Burst) – Adjustable 6V/7.4V/8.4V output 🚀 Advanced Protection Features – Includes low-voltage cutoff, thermal safeguards, signal loss, and current protection 📦 What’s in the Box? (1) Hobbywing EZRUN MAX4 ESC (1) Hobbywing EZRUN 70125 560KV Brushless Motor (1) Double-Sided Tape (2) Heat Shrink Tubes (1) User Manual 📖 (1) Hobbywing Decal Sheet 📊 Motor Specifications – Hobbywing EZRUN 70125 560KV Part Number: 30402850 Poles: 4 KV Rating: 560KV No-Load Current: 3.6A Resistance: 0.0050Ω Motor Dimensions: 70mm (2.76") x 125mm (4.92") Shaft Diameter & Length: 8mm (0.315") x 30mm (1.181") Weight: 1995g LiPo Compatibility: 8-12S LiPo Recommended ESC: Hobbywing MAX4 HV ⚡ ESC Specifications – Hobbywing EZRUN MAX4 Scale Compatibility: 1/4 & 1/5 Heavy-Duty Off-Road, Truck, Monster Continuous/Peak Current: 300A / 2000A Motor Compatibility: Sensored & Sensorless Brushless Motors Input Voltage: 6-12S LiPo Motor Limit (12S LiPo): ≤600KV (70125 Size Motor) BEC Output: Adjustable 6V / 7.4V / 8.4V, 10A Continuous, 25A Burst Waterproof: Yes Switch Type: Electronic Capacitor Protection: Yes Size (L x W x H): 125mm x 85mm x 61.7mm Weight: 775.4g 📌 Tech Note: Supports LED Program Card, LCD Program Box, and OTA Programmer (optional) for ESC parameter tuning. 🏁 Conquer Any Terrain with Unmatched Power! 🔥 Built for the biggest and most powerful RC vehicles, the Hobbywing EZRUN MAX4 ESC & 70125 560KV Motor Combo delivers unrivaled durability, extreme torque, and high-speed performance for off-road monsters, truggies, and heavy-duty RC trucks. 💨 Upgrade now and experience the world’s most powerful RC system! 🏆🏁

Read more less

  Hobbywing Xerun XR14 Sensored Brushless ESC/2848SD Motor Combo (4000kV) 🔥 High-Performance Brushless ESC & Motor Bundle! 🚗💨 Elevate your 1/14 scale on-road and off-road performance with the Hobbywing Xerun XR14 Sensored Brushless ESC & 2848SD Motor Combo! Designed for competition-level precision, durability, and power, this package combines a high-efficiency brushless motor with an advanced programmable ESC, delivering unparalleled throttle response and reliability. 🏆 Whether you're racing in Blinky or Boost formats, this sensored system provides smooth low-speed operation, high-speed stability, and a customizable driving experience—making it the perfect choice for serious RC enthusiasts. ✨ Key Features: ⚡ 70A Continuous Output Current – Delivers stable power under intense race conditions 🛠️ 26 Adjustable Parameters – Fine-tune throttle, braking, boost/turbo timing, and more 🔥 Full-Metal Heat Sink Case – Ensures maximum cooling and heat dissipation 🔋 Reverse Polarity & Thermal Protection – Prevents damage from incorrect battery connections 🛞 4-Pole Motor Design – Offers ultra-smooth acceleration and power delivery 📊 Built-In Data Recording – Analyze performance via Hobbywing Link App 💨 Adjustable PWM & Brake Frequency – Optimize control for on-road or off-road racing 🏁 IP5X Dustproof Motor Protection – Ensures durability in harsh environments 📦 What’s in the Box? (1) Hobbywing Xerun XR14 Sensored Brushless ESC (1) Hobbywing Xerun 2848SD 4-Pole 1/14 Brushless Motor (4000kV) 🔥 (1) Cooling Fan 🌀 Factory Decals & Accessories Product Manual 📖 📊 ESC Specifications: Suggested Applications: 1/14 On-Road & Off-Road Racing, 1/12 & 1/10 Light Load Vehicles Motor Type: Sensored/Sensorless Brushless Input Voltage: 2S LiPo (7.4V) Continuous Current: 70A Peak Current: 300A Dimensions (LxWxH): 1.39 x 1.23 x 1.12 in (35.2 x 31.3 x 28.5mm) Weight: 2.33 oz (66g) Motor Limits: 540-Size (>6000kV or 8.5T) BEC Voltage: 6V/7.4V at 4A Battery & Motor Connectors: Solder ⚡ Motor Specifications: Motor Type: Sensored Brushless kV Rating: 4000kV Input Voltage: 2S-3S LiPo (7.4V-11.1V) No-Load Current: 2.1A Dimensions (Diameter x Length): 1.12 x 1.89 in (28.5 x 48mm) Shaft Diameter: 0.13 in (3.175mm) Weight: 3.52 oz (100g) Poles: 4 Application: 1/14 or 1/12 On-Road & Off-Road 📌 Tech Note: The OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) is required to access performance data, including throttle, voltage, temperature, RPM, vehicle speed, and more. 🏁 Built for Competition—Unleash Peak Performance! 🔥 Whether you're fine-tuning for precision control on-road or pushing maximum power off-road, the Hobbywing Xerun XR14 ESC & 2848SD Motor Combo provides the ultimate balance of speed, efficiency, and durability. 💨 Upgrade today and dominate the track with Hobbywing! 🏆🏁

Read more less