Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

Reedy Blackbox 610R 2S Competition ESC – ASC27016Unleash precision, power, and full control with the Reedy Blackbox 610R — Reedy’s most advanced 1/10 scale ESC yet. Built on the trusted legacy of the 510R, the 610R pushes the limits with updated 32-bit hardware, lightning-fast throttle response, and unmatched tuning capability. Whether you're running stock or modified 1/10 scale setups, this ESC delivers championship-winning performance in both on-road and off-road racing. Pair it with the optional Blackbox PROgrammer2 (not included) to unlock full customization and data logging. 🔧 Key Features: CNC-machined black aluminum case with integrated heat sink Fully adjustable brake, throttle, power, and safety functions Blinky mode with ROAR-approved software 32-bit MCU for ultra-fast response Precision throttle & brake control Ultra-low resistance FET board On-board power button Optional external fan ready Pro external capacitor board Firmware updateable (with PROgrammer2) 🧠 Advanced Tuning (with Blackbox PROgrammer2 – ASC27027): Brake Settings: Strength, frequency, drag brake, punch, dynamic drag Throttle Control: Drive frequency, current limit, punch, deadband Power Delivery: Boost and top speed timing, standard & expert modes Misc. Settings: BEC voltage, temp cutoff, rotation direction, mode switching Note: Requires firmware version EE460139 on the Programmer. Already installed if purchased as the 610R/Programmer combo (ASC27017). 📦 Specs: Voltage Input: 2S LiPo Suggested Use: 1/10 Off-Road & On-Road Resistance: 0.00043 ohms Continuous Current: 160A Motor Limit: 4.5T Dimensions: 38.5 x 36.9 x 19.5mm Weight (no wires/fan): 45g BEC Output: 6.0–7.4V / 5A Power Wires: 13-gauge silicone Fan: Optional (not included)

Read more less

Furitek SCORPION PRO 5600kV Sensored Brushless Combo🔥 For Grom & NASCAR – Next-Level Power and Control 🔥 Designed for 1/18 scale platforms like the Arrma Grom and Losi NASCAR, the Furitek SCORPION PRO delivers elite brushless performance in a compact, easy-to-install system. Featuring sensored motor tech, built-in wireless programming, and waterproof durability, this ESC and motor combo is ready to dominate. 🏁 Why SCORPION PRO? Sensored 4-Pole Power: Precise, ultra-smooth throttle response Wireless Tuning: Adjust ESC settings via the Furicar App (iOS/Android) Compact & Lightweight: Designed specifically for 1/18 platforms Waterproof Design: All-weather ready for trail or track Plug & Play Fit: Drop-in upgrade for Arrma Grom and Losi NASCAR 📱 App-Controlled ConvenienceTweak throttle, braking, and more – live and on the go – no cables required. Get real-time telemetry and updates wirelessly. ⚙️ Specs (ESC): Continuous Current: 60A Burst Current: 100A Voltage: 2S LiPo BEC: 5.5V–7.4V @ 5A Programming: Furicar App Connectors: EC2 battery, 3-pin motor Weight: 0.705oz (20g) ⚙️ Specs (Motor): KV Rating: 5600kV Voltage: 2S LiPo Output: 450W Size: 28x35mm Shaft: 2mm x 12mm Weight: 2.11oz (60g) 📦 Includes: (1) SCORPION PRO Waterproof ESC w/ Wireless Module (1) 5600Kv IMPULSE Brushless Sensored Motor w/19T 0.5M Pinion (1) Sensored Cable (1) Signal Cable (1) User Manual 💡 Unmatched torque. Real-time tuning. Built for serious racers and hobbyists. Get the most out of your mini RC with Furitek's most advanced system yet.

Read more less

Unleash extreme torque with the Titan 550 Reverse Rotation Motor from Traxxas — the ultimate upgrade for your TRX-4. This 21-turn powerhouse features a 30% longer armature than standard 540 motors, delivering monster torque and rugged trail performance. Built with an integrated fan for cooler running and longer motor life, this motor is ready to crawl, climb, and conquer. 🔥 21-turn / 14.4V Reverse Rotation🔥 550-size can for maximum torque🔥 30% longer armature = more power🔥 Integrated cooling fan for extended durability Compatible with: Traxxas TRX-4 Traxxas models requiring reverse rotation 550 motors Part #: 3975R Built to handle the toughest trails — torque, traction, and temperature under control. This is Titan power.  

Read more less

Team Exalt Phoenix Gold Spec Brushless Carpet Motor (21.5T)📦 Part #: EXA01215GSC | ROAR Approved Built for serious 1/10 scale carpet racers, the Team Exalt Phoenix Gold Spec 21.5T Motor delivers elite-level performance right out of the box. Featuring a precision-crafted stator and rotor combo from the top of its production batch, this motor is hand-tuned and Motolyser-tested for maximum efficiency, power, and consistency. If you demand the best — this is it. 🏁 Gold Spec Highlights: Hand-selected top-percentage stator & rotor Sensor deviation guaranteed ≤1.0° Motolyser tuned with printout included Grade 10 metal shielded ceramic bearings Sealed with the official Gold Spec certification ⚙️ Motor Features: New 90° solder tabs for cleaner installs Infinite timing adjustment for fine-tuning Rebuildable two-piece can (7075 CNC Aluminum) Ultra-rare earth magnets for heat resistance and longevity Thermal epoxy-filled stator enhances heat dissipation Replaceable sensor board and EXAS2305 rotor included High RPM precision bearings ROAR Approved 📦 Includes: (1) Phoenix Gold Spec Brushless Carpet Motor (21.5T) (1) Sensor Cable 🏆 Whether you’re aiming for TQ or consistency run after run, the Phoenix Gold Spec 21.5T gives you a winning edge.

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

Unlock next-level speed and precision for your 1/28th-scale racer. The Hobbywing EZRun MINI28 Sensored Brushless Combo delivers an insane amount of performance in an ultra-compact package — combining a feature-rich ESC with a powerful, smooth 1626 sensored brushless motor. Designed specifically for competitive Mini-Z-style 1/28 racing, this combo gives you the control, adjustability, and efficiency needed to dominate tight layouts and technical tracks. About the EZRun MINI28 System Micro Size, Monster Performance The MINI28 ESC is tiny — just 22.7×14.2×11.8mm — but packed with advanced tuning options, including 26 adjustable parameters, a high-voltage adjustable BEC, and full compatibility with the Hobbywing OTA Module (sold separately) for smartphone programming. The included 1626 3500Kv sensored brushless motor delivers zero-cogging startup, crisp low-speed control, and big power up top. When paired with the MINI28 ESC, timing boost can drastically increase RPM for max straight-line speed. ESC Features Built specifically for 1/28 scale racing Ultra-compact and lightweight — fits almost any chassis Integrated aluminum heat sink for consistent temps Dual-mode app support (with optional OTA module) Sensored & sensorless brushless compatibility Adjustable high-voltage BEC (6V / 7.4V, 3.5A peak) ESC Specifications Continuous / Peak Current: 30A / 80A LiPo: 2S BEC: 6V/7.4V adjustable (3.5A peak) Size: 22.7×14.2×11.8mm Weight: 5g Motor Limit: 1626 size Motor Features (1626 – 3500Kv) Zero-cogging, ultra-smooth startup Excellent efficiency & cool operation Precision response and consistent torque Modular design for easy cleaning & maintenance Massive top-speed gains when using ESC timing Motor Specifications kV: 3500 Poles: 2 Input Voltage: 2S Diameter: 16mm Length: 26mm Shaft: 1.8mm x 8.5mm Weight: 18g Includes (1) EZRun MINI28 Sensored Brushless ESC (1) EZRun 1626 Sensored Brushless Motor (3500Kv) Wiring harnesses ESC Manual  

Read more less

  Unleash the full potential of your Traxxas vehicle with the Velineon Brushless Power System! This combo includes the VXL-3S ESC and 3500kV Velineon brushless motor, delivering extreme power, efficiency, and speed—while staying fully waterproof for all-weather fun. Perfect for bashing, racing, or upgrading your stock system, this combo provides the seamless blend of brutal acceleration and bulletproof reliability that Traxxas is known for. Features: Includes VXL-3S ESC + Velineon 3500kV Brushless Motor Waterproof design for worry-free driving in mud, snow, and water 3S LiPo capable for insane speeds (50+ mph in many Traxxas vehicles) Efficient brushless technology = faster, cooler, and longer runtimes Traxxas High-Current Connectors pre-installed Includes: (1) Traxxas VXL-3S Waterproof ESC (1) Traxxas Velineon 3500kV Brushless Motor Compatibility:Direct fit upgrade for many Traxxas vehicles, including Rustler, Bandit, Stampede, Slash, and more.

Read more less

Reedy Sonic 540-SP5 Spec Brushless Motor (21.5T) – Maximum Power, Precision, and Performance! The Reedy Sonic 540-SP5 Spec Brushless Motor (21.5T) is engineered to deliver top-tier stock motor performance, combining exceptional power, torque, and efficiency in a lightweight, competition-ready package. Designed in-house, the SP5's advanced stator profile, high-strength rotor, and low-resistance components make it the ultimate choice for serious racers looking for fade-free, high-RPM performance. Key Features: ✅ CNC-Machined Aluminum Housing – Optimized air cooling keeps the motor running cool and efficient.✅ Custom High-Power Stator Design – Maximizes torque and power output while maintaining high RPM.✅ Low-Resistance Solder Tabs & Oversized Collector Ring – Reduces power loss and enhances efficiency.✅ Balanced Rotor with High-Strength Magnet – Delivers consistent, fade-free power.✅ Dual Precision Ball Bearings – Ensures smooth, high-RPM operation with long-term durability.✅ Aluminum End Cap with Adjustable Timing – Fine-tune performance to match specific track conditions.✅ Fully Rebuildable – Maintain peak efficiency with replaceable components.✅ Built to ROAR Specifications – Legal for sanctioned stock racing.✅ Competition Proven – Tested and trusted by top-level racers. Precision Engineering for Unmatched Performance! 🏁 Why Choose the Reedy Sonic 540-SP5? Heat-transfer epoxy-treated copper magnet wire keeps temperatures low and performance high. Oversized collector ring and thick solder tabs minimize resistance for maximum efficiency. Lightweight design improves chassis handling and flexibility. Optimized for 1-2S LiPo applications, making it perfect for spec racing. 🔥 Push your performance to the limit with the Reedy Sonic 540-SP5! Specifications: Cells: 1-2S LiPo Diameter: 35.9mm Length: 52.5mm Shaft Diameter: 3.15mm Weight: 147-151g In the Box: (1) Reedy Sonic 540-SP5 Spec Brushless Motor (21.5T) Dominate the Track with the Reedy Sonic 540-SP5! Built for maximum efficiency, torque, and power, the Reedy Sonic 540-SP5 is the go-to choice for stock-class competition. Featuring cutting-edge design and ROAR-legal specifications, this motor delivers the speed, control, and reliability needed to win races. 🔥 Upgrade your setup today and experience race-winning power with the Sonic 540-SP5! 🏁💨  

Read more less

Take your micro RC vehicle to the next level with the LC Racing 5150kV Sensored Brushless Motor. Engineered for efficiency and performance, this motor delivers smooth throttle response, optimal low-speed control, and high-RPM power—all in a compact, durable design. 💥 Key Features: Sensored Design: Smooth, precise throttle control—ideal for technical courses and racing. High Output: 5150kV rating for aggressive power delivery and performance. Precision Shaft: 3.175mm motor shaft fits most 1/14–1/16 scale applications. Efficient & Reliable: Built to handle the demands of competitive driving. Compatible with LC Racing vehicles and many other micro scale models. 📦 Includes:  • (1) LC Racing 2840 5150kV Sensored Brushless Motor **No Sensor wire included  

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

🏆 Unmatched Control for Stock Class DominanceOptimized for 21.5T Stock Class Racing, this lightweight ESC/Motor combo delivers precise control, ultra-smooth throttle response, and cooler temps under pressure. Whether you're racing touring cars, F1, or drift machines, this combo gives you the edge every lap. 🧠 ESC – XR10 Stock Spec G2 Highlights: 100A continuous / 500A peak power output Compact, low-profile footprint with 14.3% lower CG Dual firmware modes: Blinky (stock) & Boost (mod) Built-in 6–7.4V BEC @ 5A Adjustable throttle/brake curves & drag brake frequency ROAR Approved Real-time data logging (temp, RPM, etc. with optional OTA or LCD box) ⚙️ Motor – V10 G4R 21.5T Highlights: 21.5 Turn / 2500kV Fully exposed stator for maximum cooling High-precision end bell improves structural integrity Dual sensor ports for easy wiring Lower internal resistance for cooler temps and higher efficiency 📦 Includes: (1) Xerun XR10 Stock Spec G2 ESC (1) Xerun V10 G4R 21.5T Sensored Motor ✅ Ideal for:1/10 Touring • F1 • Stock Class Buggies • Drift 💡 Tech Tip: Add the Hobbywing OTA Module (sold separately) for wireless tuning, firmware updates, and real-time performance tracking through the HW Link app!

Read more less

1RC Racing 1/18 Brushless Motor (10000Kv) w/10T Pinion – 1RC7011Looking for more speed? The 1RC 10000Kv Brushless Motor is the perfect upgrade for your 1/18 scale racer. With serious RPM and a pre-installed 10T pinion, this motor delivers the punch you need to dominate on the track. ✔️ 10000Kv for high-performance speed✔️ Pre-pressed 10T pinion for easy install✔️ Compatible with 1RC 1/18 scale platforms✔️ Perfect upgrade for racers chasing top-end power Includes:• (1) Brushless Motor (10000Kv)• (1) 10T Pinion (installed) 💥 Turn up the heat and leave the rest behind!    

Read more less

Furitek UNITY24 PRO 2-in-1 FOC Brushless System (3500kV)💥 Power + Precision for Your SCX24 💥 The Furitek UNITY24 PRO is a game-changing upgrade for 1/24 and 1/18 scale crawlers like the Axial® SCX24. This all-in-one brushless motor and ESC combo features FOC (Field-Oriented Control) technology for ultra-smooth control, powerful torque, and precision crawling. With built-in wireless programming, a waterproof CNC aluminum case, and smart BEC features, the UNITY24 PRO sets a new standard in micro crawler performance. ✅ Perfect fit for Axial® SCX24 and other micro crawlers✅ CNC-machined waterproof aluminum housing✅ Built-in wireless for easy app-based tuning (Android & iOS)✅ Smooth startup & throttle transitions with FOC tech✅ Adjustable BEC output (5.5V–8.4V)✅ Lifetime firmware updates 📦 Includes: (1) UNITY24 PRO 2-in-1 Motor/ESC System (1) CNC Aluminum Motor Mount (1) Furitek Repeater Wireless Module (1) 11T Pinion Gear 🔧 Specs: Motor: 3500kV Inrunner (12-pole) ESC Current: 30A continuous / 50A peak Voltage: 2S–3S LiPo BEC: 5.5V–8.4V switchable 🚀 Take your SCX24 to the next level with smoother climbs, better low-speed control, and simplified setup. This is the upgrade you've been waiting for.

Read more less

Waterproof Performance. Micro-Sized Precision. The Hobbywing Quicrun Mini24 ESC Combo is engineered for 1/24-scale crawlers and micro RC vehicles that demand big performance in a small package. Designed to handle sensorless brushless or brushed motors, this combo pairs the Quicrun 1621SL 3500Kv outrunner motor with a fully waterproof 25A ESC — giving you smooth throttle control, rock-solid reliability, and torque that dominates tight climbs and technical terrain. Ideal for drivers who want precision crawling, smooth low-speed control, and the durability to run anywhere, rain or shine. ⚡ Features: 🔋 Dual Motor Support: Compatible with both sensorless brushless and brushed motors. 🌧️ Fully Waterproof Design: Ready for mud, water, and wet rock trails. ⚙️ Real-Time Drag Brake Adjustment: Fine-tune drag brake force instantly via your transmitter’s AUX channel. 💪 Powerful Built-in BEC: Switchable 6V or 7.4V output to handle high-torque micro servos. 🧠 Smart Protection Suite: Overheat, throttle signal loss, and low-voltage protection included. 🧰 Compact Size, Big Power: Ideal fit for 1/24-scale crawlers and compact trail rigs. 📊 Specifications: Motor (1621SL Brushless Outrunner): KV Rating: 3500Kv Voltage: 2–3S LiPo Watts: 39.1W Type: Sensorless Brushless Outrunner Dimensions: 15.8 × 21 mm Shaft Diameter: 2.0 mm Weight: 16.7 g (with wire) ESC (Quicrun Mini24): Input Voltage: 2–3S LiPo Continuous / Peak Current: 25A / 60A BEC Output: 6V/7.4V @ 2A (switchable) Dimensions: 28.1 × 17.9 × 12 mm Weight: 10.8 g Motor Compatibility: Brushless (1621/1212/1806) or Brushed (050/130/180) Programming: Button or Hobbywing Program Box 📦 Includes: (1) Hobbywing Quicrun Mini24 Waterproof Brushless ESC (1) Hobbywing Quicrun 1621SL 3500Kv Outrunner Motor 💡 Pro Tip:Pair this combo with a 2S LiPo and high-torque servo setup for perfect throttle modulation and torque balance on technical climbs — ideal for Axial SCX24, FMS, TRX4M, and other micro crawlers.

Read more less

⚙️ Genuine Replacement Power for Your Mini-Z! Keep your Mini-Z running at peak performance with the Kyosho MR-03/MR-04 Motor Set. Designed as a direct replacement for RWD Mini-Z MR-03 and MR-04 platforms, this motor delivers smooth power delivery, efficient operation, and factory-spec reliability. Whether you’re rebuilding, maintaining, or restoring your Mini-Z, this genuine Kyosho part ensures long-lasting performance and precision fit. ⚡ Features: Genuine Kyosho replacement motor for MR-03 & MR-04 RWD chassis Smooth, efficient brushed design for reliable power Factory-tuned for consistent performance and durability Direct plug-and-play installation — no modification needed Ideal for maintenance, repair, or rebuild projects 📦 Includes: (1) MR-03/MR-04 Motor Set 🔧 Compatibility: Kyosho Mini-Z MR-03 Kyosho Mini-Z MR-04 💡 Pro Tip:Pair this replacement motor with fresh bearings and cleaned gears for the smoothest possible power delivery and maximum runtime on track.

Read more less

Smooth power. Precision control. Mini-Z performance perfected.The Atomic Zenon 4500KV Sensored Brushless Motor delivers high-efficiency power and ultra-smooth throttle response for Mini-Z racers looking to push their setup to the next level. Designed for precision handling and reliable torque delivery, this motor gives you the speed and feel needed to dominate tight technical tracks or long straightaways alike. Built to Atomic’s exacting standards, the Zenon motor features advanced sensored technology for consistent performance, fine throttle modulation, and improved low-end response — making it ideal for both stock and modified Mini-Z racing classes. ⚙️ Features 4500KV sensored brushless motor for Mini-Z platforms Delivers smooth, linear throttle response and strong torque High-efficiency rotor and stator design for maximum power with minimal heat Precision balanced for stable, vibration-free performance Compatible with Atomic and Kyosho Mini-Z MR-03, EVO, and similar brushless setups Compact and lightweight design for perfect chassis balance 📏 Specifications Spec Detail Motor Type Sensored Brushless KV Rating 4500KV Application Mini-Z 1/28-scale chassis Model Number MO-046 Manufacturer Atomic RC

Read more less

Unleash smooth, efficient power with the LC Racing 2840 4500kV Brushless Motor, designed for precision performance in LC Racing 1/14–1/16 scale vehicles. Compact, powerful, and reliable, this motor delivers exceptional acceleration, top speed, and thermal stability — perfect for racers looking to upgrade their mini-class performance. 🔥 Key Features: 4500kV brushless sensorless motor for efficient power delivery Durable 2840-size can for ideal weight and balance 3.175mm shaft compatible with standard mini-class pinions High-quality bearings for smooth, quiet operation Aluminum can design for improved heat dissipation Factory-wired bullet connectors for quick installation Ideal match for LC Racing 35A or 50A brushless ESC systems ✅ Compatibility: LC Racing EMB-WRC, EMB-TG, EMB-MT, EMB-SC, EMB-DT, EMB-1, and similar 1/14–1/16 LC Racing models Fits other small-scale vehicles using 2840-size motors with 3.175mm shaft 📦 Includes: (1) LC Racing 2840 4500kV Brushless Motor ⚠️ Tip:For best performance, pair with a 35A or 50A LC Racing ESC and gear appropriately for your track conditions to avoid overheating. 🏎️ Recommended For: 1/14–1/16 scale Buggy, Truggy, Rally, and Monster Truck applications Excellent upgrade for LC Racing RTR models seeking higher speed and torque balance

Read more less

Overview:The Arrma 550 14T Brushed Motor is a powerful and reliable replacement motor designed for Arrma 1/10 scale brushed vehicles. Built with durability in mind, this motor delivers consistent torque and smooth acceleration, making it ideal for both beginners and backyard bashers. Its rugged construction ensures long-lasting performance, even under demanding conditions. Features: 550-size 14-turn brushed motor Provides reliable torque and smooth throttle response Durable design built for bashing and off-road fun Black can finish with Arrma logo for a clean look Genuine Arrma replacement part Compatibility: Direct replacement for select Arrma 1/10 4x4 brushed models, including: Granite 4x4 MEGA Senton 4x4 MEGA Big Rock 4x4 MEGA Typhon 4x4 MEGA May also be compatible with other vehicles using a 550-size brushed motor (check manual) Includes: (1) Arrma 550 14T Brushed Motor (Black) Part Number: ARA390307 ⚡ Pro Tip: Pair this motor with a fresh pinion gear and properly geared ESC setup to maximize runtime and keep temps under control.

Read more less

This Hobbywing 10BL60 G2 ESC (rebranded for LC Racing) delivers reliable sensored performance in a plug-and-play format—perfect for 1/10 scale on-road and off-road vehicles. Compact and powerful, it’s a great fit for RTR upgrades or custom builds that demand precision and punch. 🔧 Key Features: 60A Sensored ESC – Smooth throttle control with consistent power delivery Includes Cooling Fan – Actively keeps temperatures low under heavy load Plug & Play Ready – Pre-installed T plug (Deans) and 3.5mm bullet connectors for the motor Wide Compatibility – Suitable for 2S–3S LiPo and 5–9 cell NiMH setups Perfect Match – Ideal for 540-sized sensored brushless motors 📦 Includes: (1) Hobbywing 10BL60 G2 Sensored 60A ESC w/ T-Plug (1) Cooling fan pre-installed (3) 3.5mm bullet connectors (motor leads) 🚫 Sensor wire not included – sold separately

Read more less

Replacement 23-turn brushed motor for LaTrax® vehicles. Restore your LaTrax® vehicle’s performance with the Traxxas 7575R 370-Size Brushed Motor. This 23-turn motor is designed as a direct replacement and includes pre-installed bullet connectors for quick and easy installation. 🔧 Features: 23-turn brushed design 370-size motor Pre-wired with bullet connectors Delivers smooth and reliable power Genuine Traxxas® replacement part 💥 Compatibility: LaTrax® Teton® LaTrax® Rally LaTrax® Desert Prerunner Perfect for keeping your LaTrax® vehicle running strong with factory-spec performance!

Read more less

Cayote Crest X 1/10 160A Mod Competition ESC – Precision, Power, Performance  Dominate your next race with the Cayote Crest X — a pro-level, sensored ESC engineered for serious 1/10 modified-class racing. Whether you're running touring or off-road, this powerhouse delivers clean, efficient control and extreme tuning flexibility. 🔥 Featuring a massive 48° boost/turbo timing window, advanced data logging, and 33+ programmable parameters, the Crest X is the ultimate weapon for racers who demand it all — power, protection, and performance. ✨ Key Features: ⚡ 160A Continuous Current – Reliable, race-ready power for mod-class performance📊 Super Large 48° Boost & Turbo Timing – Insane top-end speed and quick throttle response📊 Offline Data Logging – Review ESC performance via the Cayote Xlink Program Box (sold separately)🎛️ 33+ Adjustable Parameters – Full control over throttle, brake, timing, BEC, and more🛡️ Multiple Protection Modes – Includes thermal, over-current, low-voltage, and more🔀 Professional Reversing Shutdown – Safer direction changes and extra control on tight courses💨 Advanced Cooling System – Improved airflow and thermal regulation for long mains🔋 High-Efficiency BEC – 6.0V/7.4V adjustable output at 5A continuous, 8A peak 📦 What’s in the Box? ✔️ (1) Cayote Crest X 160A ESC✔️ (1) Glitch Buster✔️ (1) Capacitor✔️ (2) Sensor Cables✔️ (5) 13AWG Wire Connectors (4x Black, 1x Red)✔️ Heat Shrink Tube Set & Mounting Tape✔️ Instruction Manual 📊 Specifications: Application: 1/10 Touring & Off-Road (Modified) Motor Type: Sensored/Sensorless Brushless Input Voltage: 2S LiPo (7.4V) Continuous Current: 160A Peak Current: 1100A BEC Output: 6.0V / 7.4V @ 5A (8A peak) Motor Limits:• Touring Car: >4.5T• Off-Road: >5.5T Size: 37.9 x 31.4 x 30mm Weight: 55g Connectors: Solder Tabs Programmable: Yes (Cayote Xlink LCD Box or BTune App)* 📌 Tech Note: To access performance logs and ESC settings, use the Cayote Xlink LCD Program Box (CYECPB01) or pair with the BTune Bluetooth Module (CYECBM01) to connect via the Cayote Team App. 🏎️ Tuned to Win – Trusted by Pros The Crest X brings raw power and deep customization to your setup. Race smarter, faster, and cooler with Cayote’s most advanced ESC yet. 💡 Crush the Competition – Upgrade to Cayote Crest X Today!

Read more less

Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less

The Reedy Sonic 540-FT 13.5T Competition Brushless Motor delivers professional-level performance at an affordable price. Designed for spec racing, clubs, and racing series where equalized performance is key, this ROAR-approved motor combines precision engineering with durability and ease of maintenance. Featuring a lightweight CNC-machined can, high-strength balanced rotor, and dual ball bearings for smooth operation, the 540-FT offers exceptional value without compromising performance. Its fixed 45-degree timing ensures consistent power delivery and reliability for all racers. ⚙️ Features: CNC-machined lightweight aluminum can for superior cooling and precision High-strength balanced rotor for smooth, efficient operation Dual precision ball bearings for long-lasting performance Fixed 45° timing for consistency and spec-class fairness Easy-to-solder tabs for clean wiring and quick installation Fully rebuildable design for extended motor life ROAR approved for sanctioned competition use 📏 Specifications: Turns: 13.5T Timing: Fixed (45°) Input Voltage: 1–2S LiPo Diameter: 35.8 mm Length: 51.8 mm Shaft Diameter: 3.15 mm Weight: 175 g 📦 Includes: (1) Reedy Sonic 540-FT 13.5T Fixed Timing Brushless Motor 💡 Pro Tip:Pair the Sonic 540-FT with a Reedy Blackbox 600Z ESC and Reedy LiPo 2S Shorty Pack for a smooth, balanced, and race-ready setup right out of the box.  

Read more less

Reliable Power. Smooth Performance. Track-Ready Replacement. Keep your Losi NASCAR AWD Race Car running strong with the Losi 380 Sized Brushed Motor (28T). Designed as a direct replacement motor for the Losi 1/12 NASCAR platform, this factory-spec unit delivers smooth, consistent power and reliable performance — perfect for racers who demand dependable speed and torque on every lap. Consistent, Efficient Power Featuring a brushed 380-sized design, this motor ensures strong acceleration and responsive throttle control, giving your car the edge it needs on straightaways and through corners. Built for long-lasting durability, it’s ready to drop in and perform right out of the box. Features: Direct replacement for Losi 1/12 NASCAR AWD Race Cars 380-sized brushed motor provides balanced power and torque Smooth, consistent operation for reliable track performance Durable construction for extended use and easy maintenance Factory-tuned for plug-and-play installation Includes: (1) Losi 380 Sized Brushed Motor (28T) Compatibility: Losi 1/12 NASCAR AWD Race Car Losi — Proven Power. Championship Performance.

Read more less

⚡ Stock replacement motor for dependable performance. The Traxxas 7075 Titan 380 Brushed Motor (18-Turn) is a direct replacement for select Traxxas models, delivering smooth, consistent power in a compact design. Featuring an internal cooling fan for longer runtimes and improved durability, this motor is built to keep your RC running strong during high-action fun. ✅ Genuine Traxxas replacement part✅ 18-turn design for balanced speed & torque✅ Pre-installed bullet connectors for easy install✅ Integrated cooling fan for extended life 📦 Includes:• (1) Traxxas Titan 380 Brushed Motor (18T) Compatibility: Traxxas 1/16 E-Revo VXL & Brushed Traxxas 1/16 Summit Traxxas 1/16 Slash Traxxas 1/16 Rally

Read more less

Exalt Z-RoX 21.5T Fixed Timing Spec Motor – 30° Locked TimingPart #: EXA1215LT 🔧 Zero excuses. Just skill. The Exalt Z-RoX 21.5T motor delivers pure spec racing performance with locked 30° timing to keep the playing field level and the racing tight. Engineered for consistency and built to last, it’s the motor that puts driving and setup back in the spotlight—right where it belongs. 🏁 Features: Fixed 30° timing for locked-in fairness 21.5T winding – designed for true spec-class performance 100% rebuildable with tight QC tolerances Optional 40° & 50° endplates available (sold separately) Sleek, aggressive design – looks fast, runs faster Ideal for clubs, promoters, and competitive racers 📦 The spec is in the motor—not in the margins.Leave the tweaking behind. With Z-RoX, your performance speaks for itself.

Read more less

Hobbywing EZRun MAX5 HV G2 ESC & 56118SD 800kV Motor Combo – Unmatched 1/5 Scale Brushless Power! 💣 When only the most powerful setup will do — the MAX5 HV G2 delivers extreme torque, smooth throttle response, and smart cooling technology to keep your 1/5 scale rig running cool and wild.Designed for serious bashing and racing, this sensored ESC/motor combo provides brute power, intelligent control, and waterproof confidence to dominate any terrain. 🔥 Key Features: EZRun MAX5 G2 ESC✅ 250A Continuous / 1600A Peak Current – Built for large-scale torque✅ IP67 Waterproof Rating – Run in mud, snow, or rain✅ Intelligent Freewheeling Tech – Improves efficiency, lowers temps✅ Turbo Timing for Increased Acceleration✅ Adjustable BEC: 6.0V–8.4V @ 25A Peak✅ 8mm Bullet Connectors for Maximum Current Flow 56118SD G2 Sensored Brushless Motor✅ 800kV Output – Ideal for 8–12S LiPo setups✅ 4-Pole Rotor Design – Delivers massive torque and explosive launches✅ Detachable Design – Easy maintenance access✅ Waterproof Sensor Interface✅ Spiral CNC Aluminum Shell for max cooling✅ Explosion-Proof Rotor Construction 📦 What’s Included: (1) Hobbywing EZRun MAX5 G2 1/5 Scale Waterproof Brushless ESC (1) Hobbywing 56118SD G2 4-Pole Sensored Brushless Motor (800kV) 📊 Specifications: ESC: Application: 1/5 Scale Continuous Current: 250A Peak Current: 1600A Input Voltage: 6–12S LiPo (up to 44.4V) BEC Output: 6V / 7.4V / 8.4V (Adjustable) Dimensions: 94.5 x 59.4 x 50.9mm Weight: 428.5g Connectors: 8mm bullets Motor: KV Rating: 800kV Voltage Range: 8–12S LiPo Poles: 4 Diameter: 56mm Length: 119.2mm Shaft: 8mm x 30mm Weight: 1277g Front/Rear Bearing: D22D8T7 / D19D5T6 ✅ Perfect For: ARRMA Kraton 8S & Outcast 8S Losi 5IVE-T & DBXL-E Custom 1/5 Scale Builds Hardcore Bashers & Competition Racers 🏁 Dominate Your Terrain with Hobbywing’s Most Advanced 1/5 Scale Combo Yet! 💨 From full-throttle launches to long bash sessions, the MAX5 HV G2 + 56118SD 800kV combo gives you unmatched performance, reliability, and confidence in every drive.

Read more less

Hobbywing Xerun XR14 Sensored Brushless ESC/2848SD Motor Combo (2800kV) 🔥 High-Performance Brushless ESC & Motor Bundle! 🚗💨 Elevate your 1/14 scale on-road and off-road performance with the Hobbywing Xerun XR14 Sensored Brushless ESC & 2848SD Motor Combo (2800kV)! This combo pairs a competition-grade ESC with a high-efficiency brushless motor, delivering smooth throttle response, powerful acceleration, and superior durability. 🏆 Whether you're racing in Blinky or Boost formats, the sensored system ensures precise control, low-speed smoothness, and high-speed stability—making it the perfect choice for serious RC racers. ✨ Key Features: ⚡ 70A Continuous Output Current – Stable and reliable power under intense race conditions 🛠️ 26 Adjustable Parameters – Fine-tune throttle, braking, boost/turbo timing, and more 🔥 Full-Metal Heat Sink Case – Optimized cooling for extended performance 🔋 Reverse Polarity & Thermal Protection – Prevents damage from incorrect battery connections 🛞 4-Pole Motor Design – Ultra-smooth acceleration and efficient power delivery 📊 Built-In Data Recording – Access performance stats via the Hobbywing Link App 💨 Adjustable PWM & Brake Frequency – Customizable for both on-road and off-road racing 🏁 IP5X Dustproof Motor Protection – Designed for durability in harsh environments 📦 What’s in the Box? (1) Hobbywing Xerun XR14 Sensored Brushless ESC (1) Hobbywing Xerun 2848SD 4-Pole 1/14 Brushless Motor (2800kV) 🔥 (1) Cooling Fan 🌀 Factory Decals & Accessories Product Manual 📖 📊 ESC Specifications: Suggested Applications: 1/14 On-Road & Off-Road Racing, 1/12 & 1/10 Light Load Vehicles Motor Type: Sensored/Sensorless Brushless Input Voltage: 2S LiPo (7.4V) Continuous Current: 70A Peak Current: 300A Motor Limits: 540-Size (>6000kV or 8.5T) BEC Voltage: 6V/7.4V at 4A Battery & Motor Connectors: Solder ⚡ Motor Specifications: Motor Type: Sensored Brushless kV Rating: 2800kV Input Voltage: 2S-3S LiPo (7.4V-11.1V) Adjustable Timing: 20-40° Diameter x Length: 1.12 x 1.89 in (28.5 x 48mm) Shaft Diameter: 0.13 in (3.175mm) Weight: 3.52 oz (100g) Poles: 4 Application: 1/14 or 1/12 On-Road & Off-Road 📌 Tech Note: The OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) is required to access data logging for throttle, voltage, temperature, RPM, vehicle speed, and more. 🏁 Take Your Racing to the Next Level! 🔥 Whether you're fine-tuning your setup for maximum efficiency or pushing for top-speed dominance, the Hobbywing Xerun XR14 ESC & 2848SD Motor Combo delivers race-winning performance and ultimate reliability. 💨 Upgrade today and dominate the track with Hobbywing! 🏆🏁  

Read more less