1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

🔥 JConcepts Swaggers 2.2" Carpet Truck Front Tires (Pink) – PairDial In Your Front End for Precision Carpet Control! 🏁 Designed for the demands of high-traction carpet and astro turf racing, the JConcepts Swaggers 2.2" Truck Tires offer unmatched cornering consistency, straight-line tracking, and smooth response. With offset angular ribs and a low-profile carcass, these front tires help maintain control under pressure—making your stadium truck faster and easier to drive on aggressive race surfaces. ✨ Key Features: ✅ Precision-Molded for JConcepts 2.2” Truck Wheels (JCO3354W or JCO3354Y) 🌀 Offset Angular Rib Design – Optimized for corner speed and straight-line tracking 🔧 Low-Profile Carcass – Improves steering feel and stability on high-grip tracks 🛞 Sidewall Support Ribs – Enhance consistency during aggressive cornering 🟣 Pink Compound – Medium-soft rubber with excellent grip and wear balance 🧩 Open Cell Foam Inserts – Included for optimal tire performance across conditions 📦 Includes: (2) JConcepts Swaggers 2.2" Truck Front Tires (Pink Compound) (2) Open Cell Inserts 🧩 Compatibility: Fits most 1/10 stadium trucks using 2.2" truck wheels Recommended for use with JConcepts wheels: JCO3354W (White) or JCO3354Y (Yellow) 💨 Steer sharp. Stay locked in. Race like a pro with JConcepts Swaggers!

Read more less

Team Associated FT Aluminum Clamping Servo Horn – 25T / 15.5mm – Part 1370Compact. Strong. Precision Steering. The Team Associated Factory Team 15.5mm Clamping Servo Horn (1370) is a lightweight, high-strength upgrade for 25T spline servos from Futaba, Savox, ProTek, and others. Designed for tighter builds or where quicker steering response is needed, this 15.5mm horn provides durable performance with reduced leverage for smoother control and less servo wear. ✅ Machined 7075 T6 aluminum – rigid and race-ready✅ Short 15.5mm length – for reduced load and quicker response✅ Clamping-style mount – added security and reduced play✅ Laser-etched spline marking – easy identification✅ Fits 25T spline servos – Futaba, Savox, ProTek, Reedy, and more 📦 Includes: (1) 15.5mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1370 💡 Pro Tip: Great choice for 1/10 scale buggies, touring cars, or any build where space is limited and servo precision matters.

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Precision Bonding for High-Performance Tires The Team Losi Racing Thin Tire Glue is the go-to choice for RC racers and hobbyists who demand strong, reliable tire bonds. Designed with a thin viscosity for quick penetration, this CA glue creates a secure, long-lasting hold — ensuring your tires stay locked in place even under high-speed runs and intense bashing sessions. Perfect for on-road, off-road, and crawler tires, this 1oz bottle offers plenty of glue for multiple applications, making it an essential tool for your RC kit. ⚡ Key Features: ✅ Thin Viscosity CA Glue — fast-setting for deep penetration and strong bonds.✅ Ideal for Tire Gluing — perfect for foam, rubber, and RC wheel materials.✅ 1oz Bottle — enough for multiple tire sets.✅ Quick-Drying Formula — reduces wait time so you can hit the track faster.✅ Reliable Hold — designed to handle high speeds, jumps, and hard turns. 📏 Specifications: 🔹 Type: Thin Viscosity CA Glue🔹 Size: 1oz (28.3g)🔹 Use: Tire Gluing Applications 💡 Pro Tip: For best results, clean tire beads and rims before applying glue, and use a tire gluing jig for added precision.

Read more less

Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

Upgrade your T6.1 with the JConcepts Mono 12mm Hex Wheels — built tough, built fast, and built to win. Designed to replace the traditional pin and bearing setup, these dish-style wheels are interchangeable front and rear and deliver the maximum size allowed under ROAR rules. Whether you're tuning for performance or durability, Mono wheels give you a modern edge. Features:• 12mm hex design for front and rear interchangeability• Fits Team Associated T6.1 with 12mm hex conversion• Includes (4) wheels per pack• Sleek dish design with molded JC logo for authenticity• Available in Yellow (3354Y) or White (3354W)• Requires JCI2170 front axles, JCI2081 hexes, and ASC9880 steering blocks• Built-in glue catch and molded vent holes

Read more less

JConcepts Fuzz Bite 2.2" Pre-Mounted Stadium Truck Tires (Pink Compound)🔥 Carpet & Turf Dominator – Choose White OR Yellow Wheels! The JConcepts Fuzz Bite 2.2" Stadium Truck Tires, pre-mounted and ready to dominate carpet and turf tracks, are designed for aggressive grip and long-lasting performance. Featuring a reverse “water tower” pin design and low-profile carcass, these tires provide quick response, excellent side bite, and strong forward traction on modern high-grip surfaces. Paired with durable 12mm hex wheels (available in White or Yellow), they’re glued, balanced, and race-ready right out of the package. Whether you’re hitting CRC-style carpet or tight indoor turf, the Fuzz Bite gives you precision handling with reduced sidewall flex and rotating weight. 💡 Perfect for competitive 1/10 stadium truck carpet & turf racing. 🧩 Key Features: Pre-mounted on 2.2" 12mm hex wheels (choose White or Yellow) Premium Pink compound for high-traction conditions Reverse “water tower” pin shape for maximum surface contact Low-profile design for reduced sidewall deflection Radius-positioned pin layout for balanced grip Directional sidewall lugging for consistent cornering Ultra-lightweight scalloped tire beads Includes plush open-cell inserts 📦 Includes: (2) Fuzz Bite 2.2" Stadium Truck Tires (Pink Compound) (2) Pre-mounted White or Yellow Wheels (12mm Hex) (2) Open Cell Foam Inserts (Pre-installed) 🛞 No gluing required – pre-mounted and ready to race!

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

🔥 Keep it cool—no matter how hard you push.This high-performance 30mm aluminum fan from Team Exalt is built for racers who demand maximum cooling under extreme conditions. With speeds up to 29,000 RPM on HV 2S power, this dual ball bearing fan delivers serious airflow in a sleek, CNC-machined aluminum case. 💨 Features: Lightweight machined aluminum housing 29,000 RPM fan speed @ 8.4V High-voltage capable (6V–8.75V) JR Plug pre-wired – plug & go Ideal for ESC & motor cooling in 1/12, 1/10, and 1/8 scale RC 📐 Specs: Size: 30x30x10mm Mounting Pattern: 24x24mm Weight: 12.5g Dual ball bearing construction Fan blade: durable plastic Color: Black with Gold anodized trim Whether you're running hot laps or crawling technical lines, this fan is your insurance policy against heat fade.  

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

  Nitro Pro FK-N500PRO2 – Gen 2 Speed Meets Strength 🚀 Meet the Nitro Pro FK-N500PRO2 — the next-gen 500-class servo built to dominate the track with blistering speed and unmatched reliability. Whether you're fine-tuning your steering response or demanding more from your throttle control, this servo delivers precision under pressure. 🔥 Packing ~500oz of torque at an insane 0.07 transit speed, it's a top-tier choice for racers and hardcore bashers who want nothing but the best. Wrapped in billet aluminum and loaded with upgraded internals, this servo is a compact powerhouse that performs lap after lap. ✨ Key Features: ⚡ ~500oz @ 0.07 Transit Speed – Lightning-fast response with serious pulling power🛠️ Upgraded Gear Sets & Electronics – Precision-tuned for durability and speed🏗️ Aluminum Billet Construction – Lightweight, rigid, and race-proven🧠 Brushless Motor – High-performance core for long-lasting performance💧 IP67 Waterproof – Rain? Mud? No problem. Built to survive extreme conditions🛡️ Stainless Steel Gears (316/304) – Ultra-tough, corrosion-resistant drivetrain✅ 100% Satisfaction Guarantee + 12-Month No-Hassle Warranty 📦 What’s in the Box? ✔️ (1) Nitro Pro FK-N500PRO2 Gen 2 Brushless Servo✔️ Peace of mind with industry-leading warranty and support 🚗 Built to Win – Trusted by Racers Speed, strength, and confidence — the FK-N500PRO2 gives you the edge when it matters most. Whether it’s fine control or full-send action, this servo’s got you covered. 💡 Upgrade Your Setup – Add the Nitro Pro FK-N500PRO2 to Your Build Today!

Read more less

Team Associated B6.1/B6.1D Caster & Steering Block Set (91776)Keep your front end tight and precise with this replacement caster and steering block set from Team Associated. Originally designed for the B6.1 and B6.1D buggies, this set also works great for compatible short course and stadium trucks like the SC6.1 and T6.1. ✅ Direct Replacement – For B6.1/B6.1D buggies✅ Multi-Platform Compatibility – Also fits SC6.1 and T6.1✅ Durable Construction – Built for precision and performance✅ OEM Fit – Ensures smooth steering and proper caster geometry 📦 Includes:– (1) Left Caster Block– (1) Right Caster Block– (1) Left Steering Block– (1) Right Steering Block Perfect for rebuilds, spares, or freshening up your front-end setup before the next race.

Read more less

Team Associated RC10T6.2 Factory Team Carbon Front "Gullwing" Arms [71139] 💪 Stronger. Lighter. Faster. Take your RC10T6.2 to the next level with Factory Team Carbon Front "Gullwing" Arms. Engineered with lightweight carbon fiber composites, these arms deliver extreme rigidity and improved handling on high-traction tracks—giving you the edge when it counts. 🔥 Features:✅ Approx. 12% weight savings over “hard” material✅ Ultra-rigid for more predictable handling in high-traction conditions✅ Significantly stronger than standard options✅ Designed for gullwing-style front suspension setups 📦 Part Number: 71139🏁 Brand: Team Associated

Read more less

1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts – Ultra-Light, Ultra-Secure! Upgrade your RC wheels with the 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts, our lightest and most vibrant wheel nuts yet! Inspired by the smooth lines of the legendary SoCal Hot Rod scene, these precision-machined aluminum nuts bring a sleek, high-performance look to your ride. Designed with race-proven technology, they feature mirror-like chamfer details, a floating hex for perfect wrench engagement, and an oversized 11mm serrated flange for maximum bite and security. Built from premium 7075 aluminum, these wheel nuts deliver durability, style, and lightweight efficiency—all in one package! Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Maximum bite and wheel security, even in the toughest conditions.✅ Oversized 11mm O.D. Flange – Enhances grip and prevents wheel slippage under extreme loads.✅ Low-Profile, Floating Hex Design – Perfect wrench engagement and streamlined aesthetics.✅ 7mm Outer Hex & M4x0.7mm Threads – Universal fit for a wide range of RC vehicles.✅ Mirror-Like Chamfered Edges – Shines under light for an unmistakable high-end finish.✅ Available in 10 Bold Anodized Colors – Customize your RC with stunning color options. In the Box: (4) 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts Secure. Lightweight. Race-Ready. Don’t let inferior wheel nuts slow you down—lock in your wheels with the best in the game! The 1up Racing 7075 Aluminum Lockdown Wheel Nuts deliver unrivaled performance, security, and style, making them a must-have upgrade for any serious racer or enthusiast. 🔥 Order now and give your ride the 1up it deserves! 🏁💨

Read more less

  Team Associated 5.5x2.0mm Aluminum Ball Stud Washers – Blue (10) – Part 31383Stack Smart. Tune Precisely. Perform Better. The Team Associated 5.5x2.0mm Blue Aluminum Ball Stud Washers (31383) are essential for precise suspension tuning on your 1/10 scale vehicles. With a clean anodized finish and a small outside diameter, these washers are commonly used in on-road applications but work perfectly for off-road as well. ✅ Pack of 10 lightweight aluminum washers✅ 5.5mm outer diameter / 2.0mm thickness✅ Blue anodized finish – clean, race-inspired appearance✅ Perfect for adjusting ball stud height, roll center, and link angles✅ Ideal for both on-road and off-road 1/10 scale platforms 📦 Includes: (10) 5.5x2.0mm Blue Aluminum Ball Stud Washers Part #: 31383 💡 Pro Tip: Mix with other thicknesses to fine-tune geometry without over-adjusting a single point.  

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

  JConcepts brings aggressive style and high performance to the stadium truck class with the Finnisher body. Designed as a drop-on fit for the Team Associated T6.1, T6.4, and Yokomo YZ2-T, this body features a cab-forward layout, raked windshield, and signature performance lines. The updated hood scoop provides added clearance for unique geometry setups while smoothing front downforce. Built-in air escape channels allow racers to tune for optimal performance in outdoor conditions. Whether your shocks are mounted in front or behind the tower, this body has you covered. Includes a high-performance Gurney spoiler (#0147) to boost rear grip and improve overall balance. ✅ Features: JConcepts original Finnisher design Drop-on fit for T6.1, T6.4, and YZ2-T Cab-forward, low-profile styling Includes Gurney spoiler (#0147) Built-in air escape passages Clear polycarbonate with overspray film Includes window masks & decal sheet 📦 Body comes clear and requires painting.

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Reedy B6/B7 Flat Sensor Wire (175mm) – ASC96995Clean up your wiring and keep your electronics sharp with this Reedy Flat Sensor Wire, specially designed for a factory-perfect fit in Team Associated B6 and B7 series buggies. At 175mm, this length is ideal for tight, mid-motor setups where space matters. The flat profile tucks in nicely for a pro-level look and hassle-free routing. ✅ Designed for: RC10B6 / RC10B6.4 RC10B7 / RC10B7D Works with most brushless ESC/motor combos 📏 Length: 175mm🧰 Flat design for sleek wire management🔌 ROAR-compliant sensor connections OEM Part #: ASC96995  

Read more less

Upgrade your shocks with Team Associated's high-quality black aluminum 13mm shock caps. Designed for strength, consistency, and race-ready reliability, these caps provide enhanced durability over the stock plastic units while offering a sleek, factory look. ✅ Key Features Precision-machined aluminum construction for increased durability Anodized black for a factory team finish Lightweight design helps reduce unsprung mass Direct fit for Team Associated vehicles using 13mm shocks 🔧 Compatibility Fits the following Team Associated vehicles equipped with 13mm shocks: RC10B6.4 / RC10B6.4D RC10B6.3 / RC10B6.3D RC10B74.2 / RC10B74.2D RC10T6.4 RC10SC6.4(And any other models that use the 13mm V2 shock platform) 📦 Includes • • (2) Aluminum 13mm Shock Caps(Note: Shock bladders and O-rings sold separately)

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Upgrade your hardware with these Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Designed for a secure grip, the built-in serrations bite into the wheel surface to prevent loosening during high-impact runs or long race days. ✅ Features:• Low-profile design for improved clearance• Serrated face for extra locking power• Strong steel construction for durability• Standard M4 thread size 📦 Includes:• (10) M4 Serrated Steel Wheel Nuts🔧 Part Number: 91150💡 Ideal for 1/10 scale RC vehicles requiring M4 hardware.

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

  Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears

Read more less

JConcepts F2 Finnisher Body – T6.1 / T6.2 (Clear)🏁 Aggressive Styling Meets Championship Performance! The JConcepts F2 Finnisher Body for the Team Associated T6.1 and T6.2 stadium trucks brings together high-performance aerodynamics, detailed styling, and a winning racing pedigree. Designed with a narrow front end for improved clearance and tire avoidance during tight cornering, the F2 delivers precise handling, reduced drag, and better durability in all racing conditions. Sculpted with JConcepts’ signature Finnisher lines—including the V step-down bed design, angular roof, and dual side windows—this body looks as fast as it performs. The F2 also includes two rear wing options for high- and low-bite tracks, giving racers versatile downforce tuning right out of the package. 🔧 Compatible with Team Associated T6.1 and T6.2 race trucks. ✨ Key Features: Original JConcepts F2 Finnisher styling Narrow arrow-based front for tire clearance Dual side-window design with aggressive angular cab Sculpted rear shock tower humps support multiple shock layouts Double-drop bed with rocker panel reinforcement Includes two rear spoiler options (high-bite and low/medium-bite) Clear polycarbonate with protective film Includes window masks and F2-specific decal sheet Spoiler mounting hardware included 📦 Includes: (1) JConcepts F2 T6.1/T6.2 Stadium Truck Body (Clear, Unpainted) (2) Rear Spoilers (1) F2 Decal Sheet (1) Window Mask Sheet (1) Spoiler Mounting Hardware Kit 🛠 Requires cutting, painting, and mounting. Shown painted for illustration purposes only. 🧩 Compatibility: Team Associated RC10 T6.1 Team Associated RC10 T6.2

Read more less

Team Associated RC10T6.4 1/10 Electric 2WD Stadium Truck Team Kit – Built for Champions! The Team Associated RC10T6.4 is the latest evolution in high-performance 1/10 2WD stadium truck racing, building on the legendary RC10T6.2 platform with cutting-edge upgrades for superior handling, durability, and adjustability. Designed for elite competition, this stadium truck shares key components with the RC10SC6.4, RC10B6.4, and RC10B74.2, allowing racers to run multiple classes with ease. Equipped with 13mm big bore shocks, an advanced steering system, and a redefined suspension layout, the RC10T6.4 is the ultimate race-proven kit for serious competitors seeking maximum performance and tuning flexibility. Key Features: ✅ 13mm Big Bore Threaded Aluminum Shocks & Springs – Delivers improved bump and jump handling for superior stability.✅ 13mm Machined Shock Pistons – Optimized damping response for predictable and smooth suspension action.✅ Updated Front Ballstud Mount & Angled Steering System – Enhances steering consistency and precision.✅ Heavy-Duty 3.5mm Ball Cups & Turnbuckles – Maximizes durability for high-impact racing.✅ Updated Rear Suspension with Wider C & D Mounts – Improves traction and stability on rough tracks.✅ Longer 92.5mm CVA Driveshafts – Increases rear grip and overall control.✅ 7.0mm Blue Aluminum Rear Clamping Hexes – Ensures secure wheel fitment with laser-etched detailing.✅ Updated Chassis Side Rails with RC10B6.4 Fan Mount System – Improves cooling and electronics fitment.✅ Refined Aluminum Chassis with 22.5° Kick-Up – Reduces chassis scrub for smoother track performance.✅ Adjustable Molded Bulkheads (20°, 22.5°, 25°) – Allows racers to fine-tune caster and kick-up settings.✅ B6.4 Adjustable Height Steering Bellcrank & Rack System – Optimized bump-steer for all ride heights and caster angles.✅ B6.4 -1mm Kingpin Offset Steering & Caster Block Set – Delivers smoother, more predictable steering feel.✅ Factory Team RC10B6.4 11g Aluminum ESC Tray – Wider footprint for better weight balance and electronics fitment. Precision Engineering for Unmatched Performance 🏁 Why Choose the RC10T6.4? Updated chassis geometry enhances handling, stability, and response. Advanced steering system delivers maximum precision and predictability. Refined rear suspension and longer driveshafts improve traction and cornering speed. Lightweight yet ultra-durable aluminum chassis provides race-winning consistency. 🔥 Dominate the competition with the RC10T6.4 – engineered for serious racers! Specifications: Scale: 1/10 Type: Stadium Truck Drivetrain: 2WD Surface: Off-Road Power Plant: Electric Completion Level: Unassembled Kit Wheelbase: Varies In the Box: (1) Team Associated RC10T6.4 1/10 Electric 2WD Stadium Truck Team Kit Needed to Complete: Steering Servo 2-Channel Transmitter & Receiver 1/10 Scale 540-Size Electric Motor & ESC 2S LiPo Battery Polycarbonate Stadium Truck Body Paint for Polycarbonate Body Wheels & Tires Assembly Tools & CA Glue for Tires Race-Ready Performance – Built to Win! With championship-proven DNA, race-tuned geometry, and elite-level adjustability, the RC10T6.4 is the ultimate stadium truck kit for racers who demand top-tier performance and durability. 🔥 Upgrade your race program today with the Team Associated RC10T6.4 and take your competition to the next level! 🏁💨

Read more less

Overview:Protect your electronics and add style to your setup with the 1UP Racing LowPro Bullet Plug Grips w/5mm Bullets. These grips slide directly onto 1UP 4mm and 5mm LowPro Bullet Plugs to clearly identify positive (+) and negative (–) wires, helping prevent costly mistakes while offering a professional finish. CNC machined from high-quality aluminum, they feature bold red and black anodizing, laser-etched polarity markings, and a silver outer ring for excellent grip and premium looks. The included 1UP 5mm LowPro Bullet Plugs have a low-profile 2mm tall head with 6-point contact for reduced resistance and a total length of 15mm—perfect for today’s LCG LiPo packs. Features: Instantly identifies positive (+) and negative (–) wires Prevents pulling on wires when unplugging your battery Hides messy solder joints for a cleaner look Precision CNC aluminum grips with black/red anodizing & laser etching Silver outer ring for excellent grip Includes: 1 Pair of LowPro Bullet Plug Grips (Black/Red) 1 Pair of 5mm LowPro Bullet Plugs Compatible with 1UP 4mm & 5mm LowPro Bullet Plugs (sold separately) Recommended: Secure with a drop of CA glue after installation Compatibility: Works with all 1UP Racing 4mm & 5mm LowPro Bullet Plugs Ideal for use with modern LCG LiPo batteries

Read more less

📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.

Read more less

Team Exalt Pit Mat (24x48") w/ Anti-Fray Stitched Edge Part Number: EXA-PITMAT-2448 Upgrade your workspace with the Team Exalt Pit Mat — a premium solution for racers who want style, function, and durability in one sleek setup. Measuring 24" x 48", this pit mat provides ample room for wrenching while delivering a clean, professional appearance. ✅ Features: 🧵 Anti-fray stitched edges for long-lasting durability and a clean finish 🖐️ Smooth cloth surface for a comfortable and efficient workspace 🌱 Eco-friendly, non-slip rubber base keeps the mat securely in place 🧳 Lightweight and ultra-thin design — perfect for travel 🖨️ High-definition custom graphics with bold Exalt branding 🛠️ Ideal for pit tables, benches, or mobile workstations 📐 Specifications: Length: 48in (1219.2mm) Width: 24in (609.6mm) Thickness: 0.12in (3mm) 📦 Includes: (1) Team Exalt Pit Mat (24x48") Roll it out. Wrench in style. Represent Team Exalt.

Read more less

Reedy Flat Sensor Wire (150mm) – ASC96980Keep your electronics tidy and your setup dialed with this Reedy Flat Sensor Wire. Originally included with Reedy Sonic motors, these high-quality flat wires are now available separately to fit your custom build needs. The flat design not only looks sleek but also makes routing easier and cleaner in tight spaces. Ideal for both 1/10 and 1/8 scale applications. 📏 Length: 150mm💡 Available in sizes from 70mm to 270mm ✅ Perfect for: Cleaner wiring layout Reedy Sonic motors and other ROAR-approved ESC/motor combos OEM Part #: ASC96980

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Dial in your rear suspension for maximum consistency and cornering performance with the Rear Anti-Roll Bar Set for the RC10T6.1. This tuning option reduces chassis roll and improves stability, especially on high-traction tracks or during aggressive cornering. 🔥 Key Features: Complete rear sway bar kit for tuning roll stiffness Includes multiple wire diameters for precise adjustment Reduces body roll and increases mid-corner control Factory-designed for a perfect fit on the RC10T6.1 Ideal for high-traction conditions and fine-tuning handling ✅ Compatibility: RC10T6.1 RC10T6.2 (compatible with minor setup adjustments) May also be compatible with other 1/10 AE trucks using similar rear suspension geometry 📦 Includes: (1) Mounting Hardware Set (3) Sway Bars (varied thicknesses) (2) Sway Bar Arms All required installation hardware ⚠️ Tip:Adjust sway bar stiffness based on track grip—thicker bars = less body roll, thinner bars = more rear grip.

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated Factory Team RC10T6.2/SC6.2 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated T6.2 and SC6.2 platforms. Constructed from high quality titanium these offer increased durability over stock components while shedding weight and replace all the stock turnbuckles. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY:   Team Associated RC10 SC6.2Team Associated RC10 T6.2 

Read more less

  📱 Wireless Tuning. Total Control.Ditch the cords and take full control of your ESC with the Hobbywing OTA Programmer. Designed to work with select Xerun, EzRun, Platinum, and Seaking ESCs, this compact module connects wirelessly to your smartphone using the HW Link App—giving you the power to fine-tune ESC settings, record real-time data, and even update firmware on the go. 🎯 Key Features: Real-time wireless tuning via the HW Link App Graphical interface with drop-downs and sliders for easy setup Built-in data logging and memory storage Seamless Bluetooth transmission One-touch factory reset Compact, lightweight design 📐 Specifications: Voltage: 5–12.6V Bluetooth Version: ≤ 4.0 Range: 0–3m (open field) Size: 30.0 x 25.5 x 8.5mm Weight: 10.2g 💡 Note: Compatible only with supported ESCs. Please check your ESC manual for compatibility. Download the HW Link V2 App for optimal performance. 🎮 Your ESC. Your Way.Whether you're dialing in race settings or checking temps after a bash session, this OTA module makes managing your ESC easier, faster, and smarter.

Read more less