⚙️ Precision. Consistency. Race-Ready Setup. Dial in your setup with confidence using the SkyRC Digital Ride Height Gauge—engineered for precise, repeatable measurements that turn every adjustment into real performance. With 0.1mm resolution and a wide 2–38mm range, this tool helps you fine-tune balance, grip, and handling across any track condition. ⚡ Features: 📏 High-precision digital measurement with 0.1mm resolution⚙️ Wide 2–38mm range for multiple RC platforms🧠 Onboard MCU for stable, consistent, and repeatable readings🔧 Slim 2mm measuring blade reaches tight and recessed areas🎯 Guided calibration system ensures accuracy every time🔄 180° rotating display for easy viewing at any angle🌐 Switchable units (mm/in) for convenience🏁 Compatible with 1/24 to 1/8 scale RC vehicles 📏 Specifications: Part Number: SKY-500049Measurement Range: 2–38mm (0.07–1.49in)Resolution: 0.1mmPower: AAA BatteryUnits: mm / inchesDimensions: 127.3 x 33 x 18mmWeight: 40g (1.41oz) 📦 Includes: (1) Digital Ride Height Gauge(1) Calibration Block(1) Manual 🔧 Compatibility: Works with 1/24, 1/18, 1/16, 1/14, 1/12, 1/10, and 1/8 scale RC vehicles 💡 Pro Tip: Set ride height consistently at all four corners before every race—small changes in millimeters can make a huge difference in grip, jump handling, and lap times.

Read more less

🔧⚡ Build Custom Wires. Clean Connections. Professional Results. The ProTek RC Servo Lead & Terminal Crimping Tool makes it easy to create custom-length signal wires for servos, ESCs, and receiver batteries. Designed for precision and reliability, this tool ensures secure crimps without damaging pins or wiring. 🏁 About This Tool 🔌 Custom Wiring Made Easy Perfect for building or modifying servo leads and signal wires, allowing you to clean up your wiring and dial in exact lengths. 🎯 Precision Crimping Designed to securely crimp connector pins on 14–28 AWG wire, delivering consistent, reliable connections every time. 🛠️ Professional Results Ensures a tight, clean crimp without damaging delicate pins or wire insulation. 🔧 Key Features ✔ Designed for servo leads and signal wires✔ Works with 14–28 AWG wire✔ Precision crimping without damaging pins✔ Ideal for ESC, receiver, and battery wiring✔ Durable construction for long-term use✔ Perfect for custom wiring setups 📦 Includes (1) Servo Lead & Terminal Crimping Tool 🧰 Recommended Use Custom servo lead lengths ESC signal wire modification Receiver battery connector wiring Clean, professional wiring setups ⚠️ Note For best results, use new connector pins and housings when modifying or building wires  

Read more less

🚀 Tackle wrenching jobs faster with the BOOF RC Speed Bit Set! These 76mm-long hex bits are designed for use with your favorite 1/4" drive tools—making maintenance quick and efficient. Includes:• 1.5mm Hex Bit• 2.0mm Hex Bit• 2.5mm Hex Bit• 3.0mm Hex Bit• All bits are 76mm long• Standard 1/4” drive – fits most powered drivers or manual handles Features:✔ Precision-cut hex tips for a perfect fit✔ Ideal for RC models, drones, and hobby-grade hardware✔ Built tough for frequent use in pits or at the bench 💪 A must-have for racers and builders who want speed and precision in one compact kit.BOOF RC – Fast Tools. Faster Fixes.    

Read more less

Boof RC Aluminum TURNBUCKLE WRENCH SET (4 PCS) 3.0/3.2/3.5/3.7/4.0/5.0/5.5/6.0 AVAILABLE IN BLACK, RED, BLUE OR GREEN

Read more less

🛠️ Upgrade your pit space with the Limitless RC Pit Mat — built for racers who want a clean, functional, and professional workspace whether at home or at the track. 🏁 Pit Mat Overview Designed with both performance and presentation in mind, this 24x48” pit mat gives you plenty of room to work while protecting your setup. The smooth cloth surface provides a comfortable workspace for wrenching, while the non-slip rubber base keeps everything right where it belongs. Finished with stitched edges and high-definition Limitless RC graphics, this mat brings a polished, pro-level look to any pit area. 🔧 Features: ✔ Available in Red or Gray ✔ Smooth cloth surface for comfortable, efficient work ✔ Flexible, foldable design for easy storage and travel ✔ Anti-fray stitched edges for durability and clean finish ✔ Non-slip eco-friendly rubber base keeps mat in place ✔ Lightweight, flexible design for easy transport ✔ High-definition Limitless RC print for a professional look ✔ Large surface area for full pit setup 📊 Specifications: Length: 48in (1219.2mm) Width: 24in (609.6mm) Thickness: 3mm (0.12in) 📦 Includes: (1) Limitless Performance Parts Pit Mat 🛠️ Clean workspace. Solid footing. Built for race day.Limitless Performance Parts – Raise Your Standard  

Read more less

Boof RC CURVED OR STRAIGHT SCISSORS

Read more less

Boost your wrenching game with the BOOF RC Adjustable Aluminum Car Stand — a lightweight, rock-solid work platform built for RC enthusiasts who want pro-level convenience without the premium price tag. Whether you’re wrenching, inspecting, or just displaying your ride, this stand gives you a stable, adjustable workspace that makes maintenance easier and faster. Compatible with 1/8, 1/10, and 1/16 scale vehicles, the stand features a wide adjustable height range to handle everything from on-road racers to monster trucks. Soft rubber top pads protect your chassis while keeping your rig firmly in place so you can wrench with confidence. ✔️ Adjustable Height (60–140mm) Dial in the exact height you need for building, cleaning, or tuning. ✔️ Fits Multiple Scales Perfect for 1/8, 1/10, and 1/16 scale RC vehicles, including buggies, trucks, crawlers, and touring cars. ✔️ Aluminum Construction Lightweight, durable, and built to handle years of shop abuse. ✔️ Non-Slip Rubber Work Surface Protects chassis and keeps your rig secure while you wrench. ✔️ Ideal for Repairs, Setup, or Display Perfect for serious tuners, weekly race prep, or clean display builds. ✔️ "BOOF Value" Pricing Premium function — budget-friendly cost. Specifications: Material: Aluminum Height Range: 60–140mm adjustable Compatibility: 1/8, 1/10, 1/16 RC Vehicles Colors: Red (R), Black (BK), Blue (BL) SKU: BFCS01005 Includes: (1) Adjustable Aluminum RC Stand (1) Base Platform (1) Top Support Pad Why BOOF RC? Affordable performance gear designed for real RC racers.Reliable. Functional. Built for wrench time — not showroom pricing. 💡 Perfect For: Race prep Shock rebuilds Wheel swaps Electronics installation Cleaning + inspection Displaying your build like a boss    

Read more less

Dial in your suspension with confidence using the BOOF RC Aluminum Camber Gauge. Designed specifically for precise camber measurement, this tool allows racers to accurately set wheel camber for improved handling, consistency, and tire wear across a wide range of RC platforms. Machined from durable aluminum alloy, the BOOF RC Camber Gauge delivers long-lasting accuracy with a clean, easy-to-read scale. Its compact, lightweight design makes it ideal for trackside tuning or keeping in your pit box, ensuring fast, repeatable setup adjustments when it matters most. Whether you’re fine-tuning for race day or maintaining your vehicle at home, this camber gauge helps achieve professional, repeatable results every time. Features Designed for accurate wheel camber measurement Precision-machined aluminum alloy construction Clear, easy-to-read scale with flat, consistent surfaces Lightweight and compact for pit or travel use Ideal for suspension tuning and chassis setup Compatibility 1/8 & 1/10 scale RC vehicles Compatible with Traxxas, Arrma, Losi, Axial, HPI, Redcat Racing models Specifications Tool Type: RC Camber Gauge Material: Aluminum Alloy Includes (1) BOOF RC Aluminum Camber Gauge  

Read more less

The ultimate tool for hobbyists, techs, and DIY pros! Compact, powerful, and USB rechargeable, the BOOF RC Power2 makes quick work of all your precision screwdriving tasks. 🔧 Dual-position handle – switch between straight or pistol grip for tight spaces🔧 Forward/Reverse control for quick tightening or removal🔧 Cordless design with built-in LED light for visibility in dark spots🔧 USB rechargeable – plug into your laptop, power bank, or car charger🔧 Includes 5 long bits, USB cable & 269g lightweight driver Perfect for:• RC builds & repairs• Home assembly & upgrades• On-the-go fixes 📦 Includes:(1) Electric Screwdriver(5) Long Bits(1) USB Charging Cord Ready when you are. Built BOOF tough. 💪

Read more less

Dial in your chassis setup with precision using the BOOF RC Adjustable Ride Height Gauge. Designed specifically for accurate ride height measurement, this tool allows racers to quickly and consistently set chassis height for optimal handling across a wide range of RC platforms. With an adjustable measuring range of 10–45mm, this gauge covers most 1/10 and 1/8 scale setups, making it perfect for carpet, clay, dirt, and asphalt applications. Compact and easy to use, it’s an essential tool for fast, repeatable setup changes at the track or in the shop. Features Designed for accurate ride height measurement Adjustable range: 10–45mm Clean, easy-to-read markings Compact and lightweight for pit or travel use Ideal for chassis setup and suspension tuning Compatibility 1/8 & 1/10 scale RC vehicles Compatible with Traxxas, Arrma, Losi, Axial, HPI, Redcat Racing models Specifications Tool Type: RC Adjustable Ride Height Gauge Measurement Range: 10–45mm Includes (1) BOOF RC Adjustable Ride Height Gauge  

Read more less

MIP Gen 2 Metric Nut Drivers Set (5.5 & 7.0mm) [MIP9603] 🔧 The Nut Drivers You’ll Actually Look Forward to UsingBuilt for RC pros and garage tinkerers alike, the MIP Gen 2 Metric Nut Driver Set delivers unmatched comfort, grip, and precision. This 5.5mm & 7.0mm duo brings upgraded durability, smoother performance, and serious style to your toolbox. 🔥 What’s New in Gen 2:✅ Laser-Etched Markings – Always know what size you're grabbing🎨 Color-Coded Rings – Stop guessing. Start wrenching.🛡️ Black Oxide Finish – Tougher than your last pair 🔩 Nut Driver Highlights: Deep Socket Heads – No more fighting with long screws Thin Wall Design – Squeeze into the tight spots with ease Ergonomic Handles – Cold-proof, hot-proof, hand-happy USA Made & Hand Assembled – Built right, every time 📦 Includes:(1) Gen 2 Metric Nut Driver – 5.5mm(1) Gen 2 Metric Nut Driver – 7.0mm 🧰 Part Number: MIP9603🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

MIP Gen 2 Hex Driver (.050") – MIP9200 The legendary MIP tool gets a next-gen upgrade! The MIP Gen 2 Hex Driver (.050") brings all the precision and comfort you expect—with improved durability, upgraded design, and pro-level performance for serious RC builders and racers. Key Features: .050" precision-cut tip with thin-wall design for tight clearances Black Oxide coating protects against corrosion and wear Laser-etched size markings for quick identification Color-coded ring for easy size reference Angled tool head offers improved ergonomics Comfortable polycarbonate handle performs in all weather Hand-assembled and made 100% in the USA Includes: (1) MIP Gen 2 Hex Driver (.050") Built to last. Engineered to perform. Trusted by pros. The Gen 2 series keeps the legend alive—with even more to love.

Read more less

Precision Fit. Compact Power. Built for Mini-Z. The PN Racing Pro-4 Socket Driver (4.5mm) is purpose-built for Mini-Z racers who demand accuracy, comfort, and reliability. Designed specifically for Mini-Z 2mm lock nuts, this professional-grade nut driver offers a secure fit and smooth torque transfer, helping you make precise adjustments quickly and confidently. Trackside Ready Performance Featuring a lightweight aluminum handle and precision-machined socket, the Pro-4 driver provides excellent grip and control for high-torque applications. The adjustable shaft length (100mm–155mm) gives you flexibility for both close-quarter and deep-reach maintenance, while the compact 18mm handle diameter ensures comfortable handling during long race prep sessions. Features: Designed for Mini-Z 2mm lock nuts 4.5mm precision socket for secure fit and smooth operation Adjustable length: 100mm to 155mm Ergonomic 18mm handle for comfort and control High-quality aluminum construction for durability and precision Includes: (1) PN Racing 4.5mm Pro-4 Socket Driver PN Racing — The Tools Behind Every Fast Lap.

Read more less

Tired of swapping wrenches? The BOOF RC 4-in-1 Hex Driver is the ultimate compact tool for RC maintenance, giving you four popular sizes in one ergonomic handle. Includes:• (1) Aluminum Handle• (1) 1.5mm Hex Driver• (1) 2.0mm Hex Driver• (1) 2.5mm Hex Driver• (1) 3.0mm Hex Driver Features:✔ CNC machined hard alloy steel tips✔ Comfortable non-slip grip✔ Compact & travel-friendly✔ Designed for RC cars, drones, models & more Perfect for trail tool bags or pit boxes—BOOF RC keeps it simple and strong.  

Read more less

🔩 Upgrade your pit setup with this premium 3-piece BOOF RC hex wrench set. Crafted from high-strength aluminum alloy, each driver features dual-head hex sleeves for quick, efficient maintenance of your RC car parts. Includes Sizes:• 4.0mm / 4.5mm• 5.0mm / 5.5mm• 7.0mm / 8.0mm Highlights:✔ Lightweight aluminum alloy construction✔ CNC-machined for precision fit✔ Comfortable knurled grip for control✔ Perfect for wheels, nuts, and hardware on most 1/10 and 1/8 scale RC vehicles 🔧 Durable. Accurate. Ready for race day.BOOF RC – Tools that keep you dialed in      

Read more less

MIP Gen 2 Metric Nut Driver (7mm) [MIP9804] 🔧 Classic Look, New-Level Performance.The MIP Gen 2 Metric Nut Driver (7mm) is built for serious RC work—whether you're building, wrenching, or tuning. This precision tool makes quick work of scale hardware, with rock-solid accuracy and grip in even the tightest spots. 🔥 Gen 2 Upgrades:✅ Laser-Etched Markings – Crisp and easy to read🎨 Color-Coded Ring – Spot your size fast🛡️ Black Oxide Coated Shaft – Fights rust, scratches, and wear ⚙️ Tool Features: Hardened steel shaft for tough, long-term use Deep socket design fits long screws and recessed nuts Thin wall for tight space access Ergonomic polycarbonate handle — comfy in all temps Hand-assembled and 100% made in the USA The go-to 7mm nut driver for pros and weekend warriors alike 📦 Includes:(1) Gen 2 Metric Nut Driver (7mm) 🧰 Part Number: MIP9804🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

MIP Gen 2 Hex Driver (1.5mm) [MIP9207] 🔧 The Icon, Refined.MIP has done it again—the Gen 2 Hex Driver series brings all the legendary durability and comfort MIP is known for, now with upgraded features and styling for today’s serious RC wrenchers. Whether you're tuning up before a race or tearing down after a bash, this 1.5mm driver is a must-have.🔥 What’s New in Gen 2:✅ Laser-Etched Size Markings – Always know what size you’re grabbing🎯 Color-Coded Ring – Quick identification in a crowded toolbox🛡️ Black Oxide Coating – Resists rust and wear, stays sharp longer💡 Angled Head Design – Better ergonomics, better torque control💎 Why It’s Awesome: CNC Precision – Tip is ground from U.S. grade tool steel with tolerances within 20 microns Thin-Wall Tip – Fits tight spots other drivers can't Legendary Amber Handle – Ergonomic, comfy in hot or cold Hand-Assembled & Made in the USA – Tools that work as hard as you do📦 Includes:(1) MIP Gen 2 Hex Driver – 1.5mm🧰 Part Number: MIP9207🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

4 piece set Hex  1.5mm 2.0mm 2.5mm 3.0mm     

Read more less

Precision Tools for Precision Racing. The PN Racing Pro-4 Phillips Screwdriver is built specifically for Mini-Z enthusiasts who demand accuracy and comfort when wrenching. Designed for perfect fitment with Mini-Z Phillips screws, this professional-grade driver delivers excellent control, balance, and durability — whether you’re tuning trackside or working on your setup bench. Engineered for Mini-Z Performance Crafted with precision machining and an ergonomic aluminum handle, the Pro-4 screwdriver ensures a secure grip and maximum torque control. Its adjustable length design (100mm–155mm) offers versatility for tight spots or deep-reach adjustments, while the compact 18mm handle diameter provides a comfortable, fatigue-free feel during extended use. Features: Specifically designed for Mini-Z Phillips screws Adjustable shaft length: 100mm to 155mm Ergonomic 18mm aluminum handle for comfort and control Precision-machined tip ensures a perfect screw fit every time Built for durability and professional-level performance Includes: (1) PN Racing Pro-4 Phillips Screwdriver PN Racing — The Tools Behind Every Fast Lap.

Read more less

MIP Gen 2 Wrench & Nut Driver Set – 1.5mm, 2.0mm Hex + 7.0mm Nut Driver [MIP9620] The Legend, Upgraded.For over three decades, MIP tools have set the gold standard in R/C maintenance. Now, the Gen 2 series elevates that legacy with thoughtful refinements designed for modern racers who expect nothing less than the best. The MIP9620 set includes the most commonly used hex sizes—1.5mm and 2.0mm—along with a 7.0mm nut driver, all featuring MIP's signature craftsmanship and a new wave of enhancements. 🔥 Gen 2 Upgrades: ✅ Laser-Etched Size Markings: Crisp, permanent markings make it easy to find the tool you need. 🎨 Color-Coded Rings: Instantly distinguish your sizes at a glance—no more guessing or wrapping! 🧰 Consistent Look & Feel: Gen 2 tools create a cohesive, professional setup in your toolbox. 🔩 Hex Driver Features: Precision-ground tips with diamond wheels for extreme accuracy Made from U.S. grade tool steel drill blanks Tolerance held within ±20 microns—that’s just 0.0008" Designed for maximum engagement and minimal wear 🛠️ Nut Driver Features: Steel construction with Black Oxide coating for rust resistance and longer life Deep socket head reaches recessed nuts with ease Thin wall design fits into tight spaces Laser-engraved MIP logo and size Color-coded ring for easy identification Ergonomic polycarbonate handle—comfortable in any weather Hand-assembled & 100% Made in the USA Includes: (1) 1.5mm Hex Driver (1) 2.0mm Hex Driver (1) 7.0mm Nut Driver 📦 Part Number: MIP9620🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

The legendary MIP hex drivers — now upgraded. The Gen 2 Metric Set brings the same iconic amber handles and world-class precision, but with improved durability, clearer markings, and better ergonomics. Whether you're wrenching on race day or building at home, this is the premium tool set trusted by top RC pros for over 30 years. 🛠 What Makes Gen 2 Better: Black Oxide Coated TipsIncreased longevity, reduced wear, and better corrosion resistance compared to older nickel-plated designs. Laser-Etched Size MarkingsBright, clear, permanent markings you can read instantly at a glance. Color-Coded RingsQuickly identify the size you need from your pit bag. Angled Tool HeadMore ergonomic and comfortable during high-torque wrenching. Thin-Wall Tip DesignFits into tight spaces where standard drivers can’t reach. Hand-Assembled in the USAPrecision-built, premium quality tools that last. Comfort Polycarbonate HandlesTemperature-stable, grippy, and designed for all-day wrench sessions. 📦 Includes: (1) MIP Gen 2 Hex Driver – 1.5mm (1) MIP Gen 2 Hex Driver – 2.0mm (1) MIP Gen 2 Hex Driver – 2.5mm 🇺🇸 Made in the USA

Read more less

Organize your build like a pro! This magnetic screw tray keeps your workspace neat and your parts secure—perfect for RC car, truck, boat, and aircraft maintenance. Features:• Universal Fit• Magnetic pad holds metal screws, washers & bolts in place• 4 storage compartments for quick sorting and access• CNC-machined aluminum alloy – lightweight, durable, and stylish• Compact size: 89 x 128 x 9mm – perfect for pit bags and tool kits• Available in Red, or Black 🔧 Say goodbye to lost screws and clutter.BOOF RC tools—Engineered for precision, built for the grind.    

Read more less

🛠️ The ultimate cutting companion for precision hobby work, model building, crafts, and more! This deluxe knife set includes everything you need for clean, accurate cuts on a wide range of materials. Housed in a premium wooden case with a secure latch, it's the perfect addition to your toolbox or workstation. Includes:• (3) Ergonomic Handles – Precision, Trimming & Cutting• (15) SK5 Carbon Steel Blades – Straight, Chisel, Fine Point, Scoring & More• (1) Wooden Organizer Case with Blade Storage Compartment• Packaged in a stylish paper gift box Perfect for:• RC Builds & Scratch Projects• Paper, Plastic, Wood, Foam, Leather & More• Artists, Designers, Hobbyists & Modelers 🔪 Ultra-sharp SK5 steel for long-lasting performance🔒 Safe & neat storage in custom wood case💡 Comfortable grip reduces fatigue for fine, steady cuts Take your hobby work to the next level with BOOF precision. 👊

Read more less

The MIP Gen 2 2.5mm Hex Driver delivers the legendary precision MIP is known for—now upgraded for even better durability, visibility, and performance. Designed and built for serious RC racers and builders, this Gen 2 driver keeps the iconic amber handle while introducing modern refinements that make it tougher, clearer to identify, and longer lasting in real-world pit use. Featuring a Black Oxide–coated tip instead of nickel plating, the Gen 2 driver resists corrosion, scratches, and wear far better than previous generations. The laser-etched size marking ensures you always grab the right tool at a glance, while the thin-wall, angled tip provides excellent access to tight spaces without stripping hardware. Hand-assembled, manufactured, and packaged 100% in the USA, this driver is built to be a lifelong tool—not a disposable one. Features Precision 2.5mm hex tip for RC hardware Angled tool head for improved ergonomics and control Black Oxide coating for enhanced durability and corrosion resistance Thin-wall design fits tight and recessed fasteners Laser-engraved MIP logo and size marking Color-coded ring for quick identification Iconic amber polycarbonate handle—comfortable in all temperatures Hand-assembled and manufactured in the USA Includes (1) MIP Gen 2 Hex Driver (2.5mm) Perfect for racers, builders, and anyone who refuses to compromise on tool quality—this is the 2.5mm driver your pit box deserves.

Read more less

Upgrade your pit setup with the MIP Gen 2 Speed Tip Power Tool Tip Set, engineered for precision, durability, and professional-grade performance. This 3-piece metric set includes the most essential hex sizes — 1.5mm, 2.0mm, and 2.5mm — perfect for fast, accurate wrenching with your favorite power driver. The Gen 2 series improves on the legendary MIP design with a rugged Black Oxide coating, crisp laser-etched size markings, and the same instantly recognizable color-coded system used throughout the lineup. Each tip is hand-assembled and made in the USA, ensuring race-ready quality you can count on. Key Features: ✔️ Black Oxide Coated – Stronger, longer-lasting, and resistant to corrosion✔️ Laser-Etched Size Markings – Permanent, easy-to-read identification✔️ Angled Tool Head – Improved ergonomics for smoother, more natural wrenching✔️ Color-Coded Rings – Quickly identify sizes in your power driver lineup✔️ Made 100% in the USA – Hand-assembled with unmatched MIP craftsmanship✔️ Perfect for Power Drivers – Fast, precise maintenance with consistent tip geometry Includes: (1) Gen 2 Speed Tip Power Tool Tip – 1.5mm (1) Gen 2 Speed Tip Power Tool Tip – 2.0mm (1) Gen 2 Speed Tip Power Tool Tip – 2.5mm  

Read more less

Same legendary MIP performance — now upgraded. The MIP Gen 2 Speed Tip Hex Driver (2.0mm) delivers pro-level precision in a fast-change power-driver format. Built for speed, accuracy, and long-lasting durability, this Speed Tip is the perfect wrenching upgrade for racers and serious RC builders who expect the best. Slip it into your drill or power driver and enjoy fast maintenance with the confidence of MIP’s world-class fit and feel. Why Gen 2 Is Better MIP kept everything people love about their tools but enhanced durability, visibility, and consistency: Black Oxide coating drastically boosts wear resistance Laser-etched size markings stay readable forever Color-coded ring makes size identification instant Ergonomic angled head improves control and reduces fatigue Premium materials, handcrafted assembly, and made in the USA — this is the tool RC mechanics trust. Features Angled tool head for better ergonomics during use Black Oxide coating protects against corrosion and oxidation Laser-engraved MIP logo and wrench size Color-coded ring for quick visual ID Precision-machined for perfect hex fitment Hand-assembled and manufactured in the USA Designed to work with power drivers for faster wrenching Includes (1) MIP Gen 2 Speed Tip Hex Driver — 2.0mm

Read more less

The legendary MIP hex driver you know and trust — now upgraded for even better durability, precision, and comfort. The MIP Gen 2 line keeps the iconic amber handle but boosts overall quality with new materials, improved markings, and enhanced ergonomics, making it one of the best tools you can put in your pit bag. 🛠 Why Gen 2 Is Better: Black Oxide Coated Tip – Increased lifespan, reduced wear, and better resistance to corrosion versus the previous nickel-plated design. Laser-Etched Size Markings – Crisp, easy-to-read, long-lasting markings you'll never have to guess at. Color-Coded Ring – Quick visual ID of driver size in your toolbox. Angled Tool Head – More ergonomic and comfortable under heavy use. Thin-Wall Tooling – Fits tight, narrow spaces where clearance matters. Built by Hand in the USA – Every driver is hand-assembled and manufactured with MIP’s well-known precision. Comfort Polycarbonate Handle – Resists heat and cold, providing a consistent feel in any environment. 📦 Includes: (1) MIP Gen 2 Hex Driver – 2.0mm 🇺🇸 Made in the USA

Read more less

🔥 MIP Gen 2 Speed Tip Ball End Hex Wrench Set (2.0, 2.5 & 3.0mm) – MIP9616Same iconic look ➕ upgraded for even more durability and performance! If you're wrenching on RC, you NEED this trio. These ball-end Speed Tips make reaching tricky screws a breeze — all while saving your wrist and keeping your wrenching game strong. ✔️ Ball-end design for hard-to-reach screws✔️ Ergonomic angled heads for easier use✔️ Precision CNC-cut from US-grade tool steel✔️ Black oxide coated to fight corrosion & wear✔️ Laser-etched sizes + color-coded rings for quick ID✔️ Perfect for power tools (save those hands!)💯 Hand-assembled and made in the USA Includes:• 2.0mm Speed Tip Ball End Driver• 2.5mm Speed Tip Ball End Driver• 3.0mm Speed Tip Ball End Driver 💪 Get wrenching with MIP quality!

Read more less

MIP Gen 2 1/10 Turnbuckle Wrench (3.70mm) (Lunsford/ProTek/JConcepts) [MIP9820] 🔧 The Legend Returns—Tougher, Smarter, Sleeker.The MIP Gen 2 1/10 Turnbuckle Wrench (3.70mm) is here to make your life easier—whether you’re dialing in toe or wrenching on your pit table before the next heat. Designed for Lunsford, ProTek, JConcepts, and similar 3.7mm turnbuckles, this tool locks in control with pro-grade precision and MIP’s legendary craftsmanship. 🔥 Gen 2 Upgrades:✅ Laser-Etched Size Markings – Instantly spot what you need🎨 Color-Coded Ring – Grab the right tool, every time🛡️ Black Oxide Finish – Rust-resistant, wear-proof, race-ready ⚙️ Wrench Features: Perfectly angled for ergonomic tuning Thin wall design reaches tight spots with ease Hardened steel shaft for long-lasting reliability Deep socket fits nuts on extended screws Polycarbonate handle is comfy, durable, and built for battle Hand-assembled and proudly made in the USA 📦 Includes:(1) Gen 2 1/10 Turnbuckle Wrench (3.70mm) 🧰 Part Number: MIP9820🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

MIP Gen 2 Hex Driver (0.9mm) [MIP9212] 🔧 Mini Tip. Major Performance.When you need pinpoint precision for the tiniest screws in your RC arsenal, the MIP Gen 2 0.9mm Hex Driver is the go-to weapon. Built with the same bulletproof quality MIP is known for, now upgraded for even more durability, comfort, and style.🔥 Gen 2 Upgrades You’ll Love:✅ Laser-Etched Size Markings – No fading, no guessing, just grab and go🎯 Color-Coded Ring – Quickly ID the right tool in a cluttered box🛡️ Black Oxide Finish – Resists rust, scratches, and daily wear💡 Angled Head – Better ergonomics = better control in tight spaces💎 Why MIP Rules the Tool Game: Diamond Ground Tips – Perfect fit, zero cam-out Thin-Wall Shaft – Gets into those tricky, recessed screws Legendary Amber Handle – Comfortable grip, hot or cold 100% USA Made & Hand Assembled – Built to outlast your toolbox📦 Includes:(1) MIP Gen 2 Hex Driver – 0.9mm🧰 Part Number: MIP9212🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

4 piece se 4.0  5.5 7.0 8.0     

Read more less

The Racers Edge 11-Piece Complete Tool Set is a versatile, all-in-one kit designed for RC racers and hobbyists who want everything they need in one organized package. Featuring ergonomic 25mm composite handles, essential hex and nut drivers, cutting tools, and a durable storage case, this set is perfect for the track, pit table, or home bench. Features Ergonomic 25mm large lightweight composite handles High-grip design for comfort and control Covers common RC assembly, maintenance, and setup needs Organized storage with clear box and zipper transport case Includes 1 × Hex Wrench 1.5mm 1 × Hex Wrench 2.0mm 1 × Hex Wrench 2.5mm 1 × Hex Wrench 3.0mm 1 × Steel 5.5mm Nut Driver 1 × Steel 7mm Wheel Nut Driver 1 × Curved Lexan Scissors 1 × Sprue / Side / Tire Cutters 1 × Aluminum Hobby Knife w/ #11 Blade 1 × Turnbuckle Wrench (3.2, 4, 5, 5.5, 7 & 8mm) 1 × Cleaning Brush 1 × Clear Storage Box (245 × 175 × 38mm) Storage / Transport Zipper Case Specifications Overall Dimensions: 285 × 180 × 50mm A great all-around tool kit for beginners and experienced racers alike—perfect for keeping your pit setup clean, organized, and ready to race. 🏁

Read more less

Keep your Mini-Z performing at its best with the Kyosho Mini-Z SP Tool Set 2, a compact, high-quality tool kit designed specifically for Mini-Z maintenance and tuning. Whether you’re wrenching at the track or making adjustments at the workbench, this all-in-one set delivers the precision and durability Mini-Z racers expect from Kyosho. Designed with improved tool tip shapes and lightweight aluminum handles, this kit provides excellent grip, accuracy, and long-term reliability. Everything packs neatly into a Mini-Z branded soft case, making it easy to transport and keep organized. Features Purpose-built for Mini-Z maintenance and tuning Includes nut drivers, Phillips drivers, and hex driver Improved tool tip shapes for precision and durability High-quality aluminum handles Coated tips for long-lasting performance Compact soft carrying case with Mini-Z logo Includes (1) 3.5mm Nut Driver (1) 4.0mm Nut Driver (1) 4.5mm Nut Driver (1) #00 Phillips Screwdriver (1) #0 Phillips Screwdriver (1) #1 Phillips Screwdriver (1) 1.5mm Hex Driver Perfect For Mini-Z racers and builders Trackside tuning and maintenance Home workshop Mini-Z setups

Read more less

🔧 Clean, precise holes—every time. The BOOF RC Body Reamer is the go-to tool for drilling accurate body post holes in your RC car, truck, or aircraft shell. Whether you're mounting a fresh body or making quick adjustments, this durable tool gets the job done with ease. Features:✔ Hardened steel tapered tip for precision reaming✔ Ergonomic anti-slip handle for firm grip and control✔ Measurement marks for consistent hole sizing✔ Ideal for Lexan and other polycarbonate body shells Perfect for:• RC cars & trucks• RC airplanes• Custom shell mounting and mods 💥 No more guesswork—just smooth, accurate results.BOOF RC – Tools that keep you in the race.

Read more less

🔧 Built tough. Designed smart. The BOOF RC Multipurpose Wrench is your go-to tool for easily removing stubborn ball joints and more—essential for any RC enthusiast's toolbox! Features:✔ Durable high-hardness metal construction✔ Easily removes stubborn ball heads with precision✔ Compact and easy to handle—saves serious time on repairs✔ Excellent wear resistance and long service life✔ Available in Red or Blue to match your pit style Perfect for:• RC car repairs• Ball joint removal• Quick maintenance at the track or workshop 💥 Whether you're racing or wrenching, this is the must-have tool for your pit box!BOOF RC – Tools that win.    

Read more less

MIP Gen 2 Speed Tip Hex Driver (.050) [MIP9200S] 🛠️ Precision Meets Speed. Iconic, Upgraded. For over 30 years, MIP tools have been the gold standard in RC wrenching. Now, the Gen 2 Speed Tip series cranks it up with rugged durability and ergonomic finesse—built for pros who need speed, accuracy, and reliability. Perfect for your drill or power driver! 🔥 Gen 2 Upgrades: ✅ Laser-Etched Size Markings – No more squinting or guessing🎯 Color-Coded Ring – Instantly spot the right size🛡️ Black Oxide Coating – Better corrosion resistance, longer lifespan💪 Ergonomic Angled Tip – More comfortable and efficient than straight-cut designs 🔧 Built for Performance: Fits directly into power screwdrivers for fast action Tight tolerances for perfect fit—less wear, more wrenching Proudly Made in the USA Each tool is hand-assembled with care 📦 Includes:(1) Gen 2 Speed Tip Hex Driver (.050) 🇺🇸 Part Number: MIP9200S🔩 Brand: MIP📏 Category: Power Tool Accessories / RC Tools

Read more less