The Avid RC Essentials Bearing Kit for the Team Associated RC10 B7 / B7D is designed to save you money by replacing the bearings that actually wear out, while excluding bearings that typically don’t need frequent replacement. Unlike full bearing kits, the Essentials kit removes commonly long-life bearings—such as steering rack and ball diff bearings—making this the smart choice for routine maintenance or mid-season refreshes. What Makes It an “Essentials” Kit Excludes: (8) 4x7x2.5 steering rack bearings (2) 5x8x2.5 ball diff bearings Focuses on high-wear drivetrain and suspension bearings More cost-effective than a full replacement kit Product Benefits Saves money vs full bearing kits Perfect for regular race maintenance Precision bearings built for performance and durability Backed by Avid RC’s proven quality Optional Upgrade Parts (sold separately) 3/32" Diff Balls (14 required for new diff) Ceramic or Tungsten 2.5x6x3 Captured Thrust Bearing Ceramic or Tungsten 5/64" Thrust Bearing Balls (6 required) Ceramic or Tungsten Fitment Team Associated RC10 B7 Team Associated RC10 B7D A smart, budget-friendly bearing refresh for racers who know what actually wears out. 🏁    

Read more less

The AVID RC Ceramic Bearing Kit for the Team Associated B84 is a premium, performance-focused upgrade designed for racers who want maximum efficiency, durability, and smoothness. Featuring a mix of Ceramic Revolution and Ceramic Metal bearings, this kit reduces friction, improves drivetrain response, and extends service life compared to standard steel bearings. Perfect for full rebuilds, race-prep, or upgrading from stock bearings. Bearing Kit Contents 10x15x4 (7 pieces) – Ceramic Revolution 5x12x4 (4 pieces) – Revolution 5x8x2.5 (4 pieces) – Ceramic Revolution 4x7x2.5 (4 pieces) – Ceramic Metal 5x10x4 Flanged (4 pieces) – Ceramic Flanged Metal 5x10x4 (2 pieces) – Ceramic Revolution 12x18x4 (1 piece) – Ceramic Revolution Key Benefits Reduced rolling resistance for improved efficiency Increased durability vs standard steel bearings Smoother drivetrain and longer service intervals Ideal for high-performance and competitive racing Features Precision ceramic bearing technology Designed for speed, consistency, and longevity Direct-fit sizing for easy installation Race-proven AVID RC quality Fitment Team Associated B84 A serious bearing upgrade for racers who want every advantage on the track. 🏁

Read more less

The AVID RC B7 3x26 Front Outer Hardened Hinge Pins are precision-made from hardened steel for increased durability and consistent suspension performance. Designed specifically for the front outer hinge pin location on the B7, these pins are perfect for racers replacing bent or worn factory pins without buying a full hinge pin set. Features Hardened 3x26mm steel hinge pins Designed for front outer location Increased strength and wear resistance Maintains precise suspension alignment Ideal for race maintenance or spares Includes (2) 3x26mm Hardened Hinge Pins Notes Individual replacement for Team Associated ASC92496 Great option if you only need the front outer pins instead of a full kit Fitment Team Associated B7 A simple, strong upgrade that keeps your front end tight and consistent. 🏁  

Read more less

Avid 7" Precut High-Clearance Wing (Standard or Lightweight) [AV10129-P-S] Product Overview: After months of development, the Avid 7" Precut High-Clearance Wing is engineered for optimal airflow, durability, and adjustability. Designed to fit all 1/10 scale buggies, this wing offers high clearance wheel cutouts and a low-drag profile, making it a top-tier choice for racers aiming to reduce turbulence while maintaining strength. Features: Precut 7” wing with standard thickness for maximum durability High and large radiused wheel cutouts for superior tire clearance 18.5° rear angle for reduced pressure and low drag without sacrificing strength Small centerline mark for easy centering during installation 8 structural ribs to maintain wing shape during crashes Dual gurney flap options to fine-tune rear traction Embossed AVID logo on the center panel Includes: (1) Avid 7" Precut High-Clearance Wing  Part Number: AV10129-P-S (Standard)/AV10129-P-LW (Lightweight)  

Read more less

Avid 7" High-Clearance Wing Set (Standard) – Uncut (2pcs) [AV10129-S] Product Overview: The Avid 7" High-Clearance / Low Drag Wing is meticulously engineered for 1/10 buggies requiring maximum airflow efficiency and structural integrity. Featuring high clearance wheel cutouts, smooth airflow shaping, and unmatched durability, this wing set is the perfect solution for racers demanding both performance and strength. This version includes two uncut wings in standard thickness, providing flexibility for trimming and custom fitment. Features: Set of two 7” uncut wings Standard thickness for maximum durability and longevity High-clearance wheel arches for improved tire clearance 18.5° low-drag rear angle relieves downforce pressure without compromising strength Small raised centerline mark for quick and precise centering during mounting Eight side support ribs for structural strength during impacts Embossed AVID logo at the center of each wing Includes gurney options to fine-tune rear traction (sold separately) Includes: (2) Avid 7" Uncut High-Clearance Wings (Standard Thickness) Part Number: AV10129-S

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

The Triad Direct Drive System is designed for stock-class racers looking to eliminate the slipper clutch and reduce rotating mass for maximum efficiency. By removing the entire clutch assembly, this system delivers zero slip (other than the differential) and a more direct throttle feel in conditions where ultimate drivetrain efficiency matters. This is the lightest direct drive system on the market, weighing 6.45g with a 72T spur and just 2.62g without a spur. ⚠️ Note: Spur gear is NOT included. This option is intended for racers who already own Triad spur gears. Product Details Direct drive system for stock-class racing Eliminates slipper clutch and rotating mass Zero slip drivetrain (except differential) Lightest direct drive system available All-aluminum construction No small screws to lose during maintenance Custom M3x48 aluminum screw allows clean install and easy return to a slipper setup if desired Works exclusively with Triad spur gears (spur not included) Includes Direct Drive aluminum plate M3x48 aluminum screw Aluminum hat bushing Aluminum cone washer M3 aluminum nut Fitment Team Associated B7 Important Notes Not recommended for all drivers Best suited for experienced stock racers Install is the same as B6.1 (reference Triad Direct Drive assembly instructions) A purpose-built option for racers chasing every gram and every advantage. 🏁 💡 Pro Tip: Direct drive setups aren’t for everyone — but on stock classes and high-grip tracks, removing the slipper can give you a noticeable edge in efficiency and throttle response.  

Read more less

🏁 Built to Win – Engineered for Precision The Avid Truss 2.2 Rear Buggy Wheels bring next-level design and performance to your 1/10 scale race setup. Every detail is optimized for durability, torque strength, and visual appeal — featuring Avid’s unique concave face and reinforced truss hex structure for maximum power transfer and style. Whether you’re running high-grip carpet or smooth clay, these lightweight wheels deliver consistent performance lap after lap. ⚡ Features: 💪 Truss reinforcement at the hex ensures maximum torque strength and stability through hard corners 🧱 Concave vertical face protects wheel nuts and axles while adding sleek visual depth 🌀 Six internal ribs minimize rotating mass and resist fatigue under heavy load 🧩 Low-profile inner bead ribs allow tire foams to flex naturally for better landings ✨ Textured glue bead and tapered outer face ensure clean, secure tire mounting 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts 🌬️ Oversized 4mm vent holes provide smooth airflow—no drilling needed ⚙️ Standard 2.2" fitment for universal buggy tires 💡 Lightweight at just 17.5g per wheel to reduce rotating mass and improve acceleration 📦 Includes: (4) Avid Truss 2.2 Rear Wheels – White 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 3.5mm (Standard Offset) Weight: 17.5g each Fitment: 1/10 2WD & 4WD Buggy Rear Part Number: AV1110 💡 Pro Tip:Pair these with Avid Truss 2.2 Front Slim Wheels (AV1112) for a complete, balanced wheel setup that looks as sharp as it performs.  

Read more less

🏁 Precision. Strength. Style. The Avid Truss 2.2 Buggy Front Slim Wheels set a new standard for performance and durability in 1/10 buggy racing. Designed for racers who demand precision and style, these wheels feature Avid’s signature concave truss face, optimized rib structure, and lightweight build for superior handling and torque strength. ⚡ Features: 🧱 Truss reinforcement at the hex delivers maximum torque strength and prevents flex under load 💥 Concave vertical face protects axles and wheel nuts from track impacts while giving a premium polished look 🌀 Six internal ribs reduce rotating mass and increase structural rigidity 🧩 Low-profile inner bead ribs let the foam absorb impact for smoother landings 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts ✨ Textured glue bead for stronger tire bonds and cleaner mounting 🌬️ 2.5mm vent holes allow perfect airflow – no drilling needed ⚙️ Standard 2.2” fit for all 1/10 scale buggies 🎨 Available in White or Yellow 📦 Includes: (4) Avid Truss 2.2 Front Slim Wheels 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 2.0mm (Standard Offset) Fitment: 1/10 2WD Buggy Front (Slim Tires) Part Number: AV1112 💡 Pro Tip:Pair these with Avid 2.2 Rear Buggy Wheels and your favorite clay or carpet tires for a perfectly balanced setup that shines on-track and in the pits.    

Read more less

Avid B7 Hardened Rear Inner Hinge Pins (3.5x50mm) – 2pcs [AV10135] Product Overview: The Avid 3.5x50mm Hardened Rear Inner Hinge Pins for the Team Associated B7 are designed to fix a known issue with the stock kit pins. The stock 49.5mm length can lead to the pins pulling through the C arm mounts during hard impacts or wear. Avid’s precision-engineered 50mm pins provide that extra bit of length needed to offer better support and reduce the risk of failure — a must-have upgrade for racers pushing their B7 to the limit. Features: (2) 3.5x50mm hardened steel hinge pins for B7 rear inner location Increased length over stock (49.5mm) helps prevent pin pull-out from C arm mounts Designed as a direct replacement for the rear hinge pins in ASC92496 (no need to buy the whole set!) Developed in collaboration with Avid UK distributor (XFactory) For users with original-style C arm mounts: flip the arms and remove a 1mm shim for added retention strength (UK tuning tip!) Includes: (2) 3.5x50mm Hardened Rear Inner Hinge Pins Part Number: AV10135

Read more less

Avid B7 Hardened Front Inner Hinge Pins (3x34mm) – 2pcs [AV10143-34] Product Overview: The Avid 3x34mm Hardened Front Inner Hinge Pins are a precision upgrade for the Team Associated B7. Crafted from high-strength hardened steel, these pins are a direct replacement for the front inner location — offering enhanced durability where it counts. Whether you're replacing worn pins or want to avoid buying the full hinge pin set (ASC92496), these are your go-to solution. Features: (2) 3x34mm hardened steel hinge pins for the B7 front inner location Built to withstand extreme racing conditions Direct replacement for pins in ASC92496 – no need to purchase the entire kit Includes: (2) 3x34mm Hardened Front Inner Hinge Pins Part Number: AV10143-34

Read more less

The Avid RC -2° C Arm Mount for the AE 3 Gear Transmission is a must-have upgrade for high-bite surfaces like carpet and turf. Originally developed for the B6.3, this proven design carries over to the B7 platform to help free up the car without sacrificing rear track width. Normally, achieving low rear toe on carpet means narrowing pills at the D mount—adding side bite and tightening the car too much. This C Arm Mount widens the C pivot block, allowing you to start at 1° of rear toe with centered pills in both the C and D mounts instead of 3°. The result is a freer, more predictable car that rotates better and handles awkward landings with confidence. Key Benefits Removes 2° of rear toe without reducing track width Frees up the car in corners Improves control when landing jumps sideways (corner tabletops) Ideal for high-bite carpet and turf tracks Correct way to reduce rear toe without adding unwanted side bite Features Precision-machined from 7075-T6 aluminum Black anodized with silver chamfer highlights Side pill cutouts removed to prevent hinge pin pull-out Laser-etched Avid logo and -2° marking for easy identification Strong, race-proven design Fitment Team Associated B7 / T7 / SC7 3 Gear Transmission only 📌 Recommendation: Use a longer hinge pin for increased strength and durability. A proven geometry upgrade that delivers real results on high-bite tracks. 🏁  

Read more less

Available Colors: White, Green, Orange, Blue, Black, Red Upgrade your charging setup with the AVID RC 2S Charge Lead Cable — a high-quality, color-coordinated lead built for clean wiring, easy identification, and dependable performance. Each lead uses all-black wires wrapped in a colored sheath, giving you a sleek, organized charging layout without sacrificing visibility. Designed for 2S LiPo packs, this 12-gauge, ultra-flexible silicone wire provides efficient, low-resistance charging. On the charger end, you get a reliable XT90 plug, and on the battery end, gold-plated 4mm to 5mm bullets to fit virtually all 2S hardcase packs. Perfect for racers who want durability, convenience, and clean pit organization. Features Color-coordinated design (black wiring with colored sheath) 12-gauge soft silicone wire for high-current charging 2 ft (610mm) length for flexible charger layout XT90 plug on charger end Gold-plated 4mm–5mm bullets on battery end for universal 2S compatibility Includes XH 3-pin balance plug installed Extra XH 7-pin adapter included Balance leads are 2.5" (63.5mm) longer than the charge leads for easy reach into any charger Pro Tip Want to plug the XH 3-pin directly into the charger balance port?Most users simply trim one alignment rail with an X-Acto — no balance board required!

Read more less

⚙️ Precision-Engineered Power. Made in the USA. The Avid RC Triad 69-Tooth Spur Gear is built exclusively for the Avid Triad Slipper Clutch System, delivering ultra-smooth, ultra-quiet performance with unmatched durability. Crafted from Avid’s custom-blend low-noise material, this gear eliminates the harsh sound of standard fiberglass spurs while offering three times the impact strength of Delrin — all in a perfectly balanced, true-spinning design. ⚡ Features: 🇺🇸 Made in the USA from a proprietary high-strength plastic — zero glass fibers for low noise and maximum toughness 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form provides smooth rolling and consistent mesh 🎯 Centerpoint injection-molded for perfect balance and true rotation 🧩 Number of teeth molded in for easy identification 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch setup compatibility 🧠 Designed exclusively for use with the Avid Triad Slipper Clutch System 📏 Specifications: Pitch: 48P Tooth Count: 69T Compatibility: Avid Triad Slipper Clutch System (Stock or Mod Kit) Part Number: AV1020-69 💡 Pro Tip:Keep a few different Triad spur sizes (66T–87T range) on hand so you can fine-tune your gearing for any track layout or motor setup.  

Read more less

Upgrade your suspension precision with the AVID 13mm Ringer Shock Collar Kit, engineered to let you run 13mm springs on multiple shock platforms including Team Associated 13mm, TLR G3/3.5, and Schumacher LD3/L1R. Crafted for racers who demand accuracy and consistency, these collars feature offset laser-etched AVID logos that allow you to match spring tension left-to-right in clean ¼-turn increments. Machined with AVID’s signature silver ringer highlight, these collars not only perform—they look pro doing it. Features Compatible with 13mm springs across popular racing platforms Fits: AE 13mm, TLR G3/3.5, Schumacher LD3/L1R shock bodies Offset laser-etched AVID logos for easy visual alignment Allows perfect ¼-turn spring tension adjustments Internal o-ring design keeps collars firmly in place Signature silver ringer machining for premium finish Works great with AE V3, XRAY, and 1UP 13mm springs Tips Spring cups are not included.Recommended options:• AE 13mm Spring Cups – ASC91966• AE 12mm Spring Cups – ASC91814 (compatible with some setups) Includes (4) AVID 13mm Shock Collars (4) Internal O-Rings (pre-installed)  

Read more less

⚙️ Quiet Strength. Precision-Engineered in the USA. The Avid RC Triad 72-Tooth Spur Gear delivers smooth, whisper-quiet performance and unbeatable strength — designed exclusively for the Avid Triad Slipper Clutch System. Each gear is made from Avid’s custom-blend, glass-free high-strength material, offering three times the impact resistance of Delrin while running noticeably quieter than traditional fiberglass-reinforced spurs. Perfectly balanced, true-spinning, and built to last — this is the gear serious racers trust. ⚡ Features: 🇺🇸 Made in the USA from Avid’s premium low-noise, high-strength composite (zero glass fibers) 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form ensures smooth, drag-free rolling 🎯 Center-point injection molded for perfect balance and true rotation — no wobble 🧩 Molded tooth count and setup indicators for easy identification and assembly 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch configuration 🧠 Designed exclusively for the Avid Triad Slipper Clutch System (Stock or Mod kits) 📏 Specifications: Pitch: 48P Tooth Count: 72T Compatibility: Avid Triad Slipper Clutch System Part Number: AV1020-72 Made in: USA 💡 Pro Tip:Use 72T for mid-range gearing — perfect balance between acceleration and top-end speed on most 1/10 2WD buggy and stadium-truck setups running a Triad slipper.  

Read more less

🔌 Simple, Reliable Charging – The Avid RC Receiver Charge Lead makes charging your receiver packs easy with 4mm bullets to a female Futaba plug. Built with quality 20awg wire and wrapped in a sleek black nylon sleeve, it’s a durable and dependable pit essential. ⚙️ Specifications:✅ 4mm bullets to female Futaba plug✅ 20awg wire for efficient charging✅ 13.8in (350mm) length for flexibility and convenience✅ Black nylon sleeve for protection and clean look 📦 Includes: (1) Receiver Charge Lead – 4mm Bullet to Female Futaba 💡 Pro Tip: Always inspect your charge leads before race day — a clean, solid connection ensures safe charging and prevents false peak issues.  

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less