Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

Team Exalt "X-Rated" LCG Shorty 2S LiHV Battery (7.6V/5200mAh/135C)📦 Part #: EXA3203 | ROAR Approved Push your setup to the limit with the Team Exalt X-Rated 2S 5200mAh LCG Shorty LiHV battery — a lightweight powerhouse featuring the latest Silicon Graphene technology. Engineered for ultra-low resistance, high current output, and a flat, stable discharge curve, this pack delivers professional-grade performance whether you're on carpet, turf, or dirt. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Silicon Graphene cell structure for longer cycle life and improved durability Low center of gravity (LCG) design enhances vehicle handling and responsiveness Flatter discharge curve keeps voltage more consistent throughout the race 5mm High-Amp Bullet Connectors provide efficient and secure power delivery ROAR Approved as of November 2023 📊 Battery Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5200mAh Discharge Rate: 135C (Continuous) / 270C (Burst) Watt Hours: 39.52Wh Connector: 5mm Bullets Balance Lead: 2mm Bullet Dimensions (LxWxH): 96 x 47 x 20mm (3.8 x 1.85 x 0.79in) Weight: 176g (6.21oz) Whether you're fine-tuning a national-level setup or gearing up for your next club race, Team Exalt's X-Rated LCG Shorty gives you an edge in power, runtime, and control. Let me know when you’re ready for the next one!

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less

Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

Charge Clean. Charge Confident. Upgrade your charging setup with the Team Exalt ProCharge 2S Specialized Charging Cable, designed for precision, durability, and a professional look at your pit station. Built for Junsi iCharger 456/458 Duo chargers, this premium cable ensures a clean, secure, and efficient charge for your 2S LiPo batteries. Professional-Grade Construction Each ProCharge cable is meticulously assembled with 12AWG charge leads and 18AWG balance leads, paired with high-quality XT90 and 5mm bullet connectors for consistent, low-resistance power delivery. A custom braided PET sleeve and self-sealing shrink tubing keep everything neat, organized, and protected from wear. Features: Custom-built 2S ProCharge cable for Junsi iCharger 456/458 Duo XT90 charger connector with 5mm battery bullets 12AWG main leads and 18AWG balance leads for reliable current flow 2mm balance plug to 3-pin XH connector Braided PET sleeve for a clean, professional finish Self-sealing shrink tube ensures durability and neat cable management Reduces pit clutter and promotes safe, organized charging Specifications: Spec Detail Charger Connector XT90 Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt ProCharge 2S Specialized Charging Cable Team Exalt — Professional Power. Cleaner Charging.

Read more less

Upgrade the drivetrain of your XRAY XB4 2024/2025 with the Exalt Hybrid-XSN Ceramic Bearing Kit. Featuring a precision-engineered hybrid design, these bearings pair Silicon Nitride ceramic balls with stainless steel inner/outer rings for smoother operation, higher speed, and greater impact resistance than traditional full steel or full ceramic bearings. Pre-lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil, this kit provides out-of-the-box performance that’s built for the demands of racing. 🔥 Key Features: Designed for the XRAY XB4 2024 & 2025 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster and smoother than all-steel bearings More impact-resistant than full ceramic bearings Lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable: clean with citrus cleaner or acetone, re-lube as needed Built for maximum performance in both spec and modified racing ✅ Compatibility: XRAY XB4 2024 XRAY XB4 2025 📦 Includes: (16) Hybrid-XSN Ceramic Bearings (complete kit for XB4 2024/2025) ⚠️ Tip:Check your bearings before each race day and re-oil as needed to ensure peak drivetrain efficiency and extended bearing life.  

Read more less

Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less

Boost drivetrain efficiency and durability with the Exalt Hybrid-XSN Ceramic Bearing Kit for the Team Associated B74.2. Featuring Silicon Nitride ceramic balls paired with stainless steel inner/outer rings, these bearings deliver smoother, faster performance than steel bearings while being more impact-resistant than full ceramic designs. Each kit comes lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil for ready-to-race performance. 🔥 Key Features: Engineered for the Team Associated B74.2 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster, smoother operation than steel bearings More durable under impact than full ceramic bearings Pre-lubed with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable design — clean with citrus cleaner or acetone, re-oil as needed Built for maximum performance in spec and modified racing ✅ Compatibility: Team Associated RC10B74.2 1/10 4WD Buggy 📦 Includes: (18) Hybrid-XSN Ceramic Bearings (complete kit for B74.2) ⚠️ Tip:Inspect bearings before each race — re-oil as needed for peak speed, smoothness, and longevity.  

Read more less

Exalt Z-RoX 21.5T Fixed Timing Spec Motor – 30° Locked TimingPart #: EXA1215LT 🔧 Zero excuses. Just skill. The Exalt Z-RoX 21.5T motor delivers pure spec racing performance with locked 30° timing to keep the playing field level and the racing tight. Engineered for consistency and built to last, it’s the motor that puts driving and setup back in the spotlight—right where it belongs. 🏁 Features: Fixed 30° timing for locked-in fairness 21.5T winding – designed for true spec-class performance 100% rebuildable with tight QC tolerances Optional 40° & 50° endplates available (sold separately) Sleek, aggressive design – looks fast, runs faster Ideal for clubs, promoters, and competitive racers 📦 The spec is in the motor—not in the margins.Leave the tweaking behind. With Z-RoX, your performance speaks for itself.

Read more less