Limitless Carpet: 2WD MOD Buggy
-
Team Associated B6.1 / B6.1D Gear Differential Seals – Part #91782
Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design
$5.99
-
ProTek RC Self-Stick Chassis Weight Strip (120g / 4.2oz) PTK-8380
Dial in your car’s balance with precision—anywhere on the chassis.The ProTek RC Self Stick Chassis Weight Strips give racers a compact, customizable way to fine-tune weight bias, improve stability, and optimize handling on any track surface. About the Chassis Weights Each strip includes twelve 5g weights (24 total), backed with strong pre-applied adhesive.Their compact 20×9.4×4.4mm size makes them perfect for tight mounting locations—lay them flat, stack them, or tuck them into hard-to-reach spots to get your setup dialed exactly how you want. Great for: Balancing left/right weight Adding traction on slick tracks Fine-tuning front/rear bias Stabilizing high-powered builds Whether you're prepping for carpet, dirt, oval, or on-road, these weights give you total control over your setup. Features Compact 20×9.4×4.4mm design fits tight spaces Strong pre-applied sticky tape Perfect for fine-tuning chassis weight bias 120g total weight per package Stackable for precise tuning Includes (24) 5g Self-Stick Chassis Weights (12 per strip)
$4.99
-
Team Associated B6 Steel Servo Chassis Weight (24g) SKU: 91747
Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.
$15.99
-
TQ Wire XT60 2S Charge Cable w/ 4mm & 5mm Bullet Connectors (2') – TQW2723
Compatible with iCharger, iSDT, and SkyRC Chargers Overview:The TQ Wire XT60 2S Charge Cable delivers the perfect balance of premium materials, versatile connectivity, and durability. Designed for serious RC racers and hobbyists, this lead makes charging your 2S LiPo batteries easier, cleaner, and more reliable—whether you’re in the pit or at the track. About the XT60 2S Charge Cable Built for Performance and DurabilityFeaturing dual-size stepped bullets (4mm & 5mm), this cable ensures compatibility with a wide range of LiPo batteries. The 2-foot cable uses 12-gauge high-strand silicone wire wrapped in protective black nylon mesh, giving you maximum current flow and long-lasting flexibility. The XT60 connector provides a secure, low-resistance connection to your charger, compatible with popular models such as the Junsi X6 iCharger, iSDT, and SkyRC B6, as well as other chargers that use an XT60 output. Premium Design FeaturesTQ Wire went the extra mile with a molded strain relief housing around the bullet connectors and balance port, ensuring a stronger connection and minimizing wire fatigue. Integrated “grippers” make it easy to remove the bullets from your battery safely and efficiently—no more struggling with tight fits or risking wire damage. Features: XT60 connector for charger connection (iCharger/iSDT compatible) 4mm & 5mm stepped bullets fit most 2S LiPo packs Durable molded strain relief for long life and safety Integrated “grippers” for easy battery removal Heavy-duty 12-gauge silicone wire for efficient power transfer Wrapped in black nylon mesh for protection and clean looks 2-foot length provides ample reach without clutter Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT60 Battery Connectors 4mm & 5mm Stepped Bullets Balance Port XH Compatibility Junsi X6 iCharger, SkyRC B6, iSDT, and any XT60-output charger Includes: (1) TQ Wire 2S XT60 Charge Cable with 4mm/5mm Bullets Note:TQ Wire also offers a version with low-profile 90° tubes instead of the XT60 connector for alternative setups.
$26.99
-
Team Associated RC10B7 Factory Team Bearing Set (92464)
Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.
$33.99
-
Gens Ace iMars S100 G-Tech Smart AC Balance Battery Charger (6S/10A/100W) – Black Or White Part Number: GEAS100-UW / GEAS100-UB
💥 Smart, Simple, Powerful. Level up your charging game with the Gens Ace iMars S100 – a compact beast that delivers up to 10 amps of charging power with 100 watts of output, all packed into a sleek and portable design. Whether you're juicing up FPV drone packs, 1/10 & 1/8 scale race packs, or heli batteries, this charger does it all with ease. ✅ G-Tech Smart Compatible (and works with non-smart packs too)✅ Physical button interface – no more accidental swipes✅ AC 100–240V input – travel-friendly worldwide✅ Color display + clean UI – see everything at a glance✅ XT60 output + multiple adapter cables included✅ Super lightweight – only 260g! 🔧 Specs at a Glance:• Input Voltage: AC 100-240V• Output Voltage: 27V max• Charge Power: 100W / 10A max• Discharge Power: 5W• Cell Types: 2S–6S LiPo, LiFe, Li-ion, LiHV | 4S–18S NiMH• Output Connector: XT60• Size: 139.8 x 83 x 40mm• Weight: 260g 📦 In the Box:• iMars S100 Charger (Black or White)• AC Power Cable• XT60 to EC3 / EC5 / T-Plug Adapters• USB Cable 👉 Lightweight. Versatile. Ready to travel or race. The iMars S100 is the perfect smart upgrade for your pit bag.
-
Team Losi Racing 22 5.0 VHA Stiffezel Rear Arm Set (TLR234110)
This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.
$11.99
-
Team Associated CVA/Wheel Hex Pin (4) [91436]
Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms
$2.99
-
Team Associated Factory Team B74.1 11mm Octalock LCF Slipper Pad – 92285
Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.
$15.29
-
Team Associated RC10B7 Factory Team Carbon Gearbox – 92406
Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁
$18.69
-
Pro-Motion Viper 2.2" Slim 2WD Front LP Carpet Buggy Tires (2) — C4 Red (Soft Compound) Part #: 3070-C4
Pro-Motion Viper 2.2" Slim 2WD Front LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3070-C4 Precision Steering. Peak Grip. Podium Ready. The Pro-Motion Viper Slim 2WD Front Tire is engineered for high-bite indoor tracks, delivering precise steering response with its low-profile carcass and directional tread. The soft C4 Red compound gives you the edge in low-grip or cooler track conditions, while the tapered mini pin layout and dual outer wedges help maintain control in high-speed corners and through bumps. ✅ Slim profile designed for 2WD front buggies✅ Low-profile sidewall for reduced flex and sharper feel✅ C4 Red soft compound for aggressive front-end grip✅ Directional tread for tunable steering response✅ Optimized for carpet and turf tracks 📦 Includes:(2) Viper 2.2" Slim 2WD Front LP Carpet Tires 💡 Pro Tip: Match with C4 Viper rears for balanced handling and maximum traction.
$14.99
-
Pro-Motion 2.2" Rear Buggy Wheels (4) Available in White (3050-W) or Yellow (3060-Y)
Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.
-
Team Associated RC10B7 HD Gear Differential Outdrives (2)
Team Associated RC10B7 HD Gear Differential Outdrives (2) – Built Tough for Maximum Power Transfer! ⚙️ Maintain your RC10B7 or RC10B7D’s drivetrain strength with the Team Associated Factory Team HD Gear Differential Outdrives!These heavy-duty outdrives are designed to handle the intense loads of competitive racing, ensuring your buggy stays durable and consistent under extreme conditions. ✨ Key Features: ⚙️ Heavy-Duty Construction – Engineered to handle the rigors of intense 1/10 scale racing 🔧 Direct Replacement Design – Perfect fit for the Team Associated RC10B7 and B7D gear differentials 🏁 Improved Durability – Strengthens the drivetrain for better long-term performance 🛡️ Trusted Factory Team Quality – Race-proven reliability from Team Associated 📦 Includes: ✔ (2) Heavy-Duty Gear Differential Outdrives 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for stock RC10B7 and B7D differentials.🔹 Ideal for racers looking to enhance drivetrain longevity and consistency under high loads. 🏁 Drive harder and push your limits with the Factory Team HD Gear Differential Outdrives! 🔥 Upgrade today for maximum durability on race day with Team Associated! 🔥
$15.29
-
Team Associated RC10B7 Carbon Fiber Rear Shock Tower 92431
Team Associated RC10B7 Carbon Fiber Rear Shock Tower – Lightweight & Race-Ready 🏁 Upgrade your rear suspension with the Team Associated RC10B7 Carbon Fiber Rear Shock Tower, designed to deliver race-proven durability and reduced weight for optimal performance. This precision-cut carbon fiber tower is a direct replacement that maintains strength while lowering your buggy’s center of gravity. 🔧 Key Features: ✅ Lightweight carbon fiber construction for improved handling✅ High strength and stiffness for consistent shock response✅ Direct fit for easy installation✅ Optimized layout for tuning shock position and geometry 📦 Includes: (1) Carbon Fiber Rear Shock Tower ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength meets precision.Take your rear suspension setup to the next level with this carbon fiber shock tower upgrade. 🏆
$22.99
-
R1WURKS Black WS2 Grease (3g) 900033
Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.
$7.99
-
Team Losi Racing 22X Delrin Spindle Bushings (8) – TLR-1187
Upgrade the precision and durability of your front suspension with the Team Losi Racing 22X Delrin Spindle Bushings (TLR-1187). Precision-machined from high-strength Delrin, these bushings provide a lightweight yet extremely durable alternative to the stock composite bushings. Designed for racers who demand tunability and performance, these bushings include multiple height options, allowing you to fine-tune your front-end geometry and steering response for different track conditions. Their precise fit ensures smooth operation and consistent suspension performance. Features• Made from strong, durable Delrin material• More durable than stock composite bushings• Lightweight and tough for race applications• Precision-machined for a perfect fit• Multiple height options for suspension tuning• Helps fine-tune front-end geometry and handling Includes• (8) Delrin Spindle Bushings Compatibility• TLR 22X• TLR 22X-T
$11.99
-
Team Associated Factory Team 5x12x4mm Bearings (4) – 91567
The Team Associated Factory Team 5x12x4mm Bearings are precision replacement bearings designed to restore smooth operation and reliable performance in critical drivetrain and rotating assemblies. Built to Factory Team standards, these bearings help reduce friction, improve efficiency, and maintain consistent performance on the track. Ideal for replacing worn bearings during maintenance or rebuilds to keep your vehicle operating at peak performance. Features Genuine Team Associated Factory Team bearings Precision construction for smooth rotation Helps reduce drag and improve efficiency Ideal for maintenance or performance rebuilds Factory-fit replacement Includes (4) 5x12x4mm Bearings Compatibility Team Associated RC10 B74 Other applications requiring 5x12x4mm bearings A dependable replacement choice for maintaining smooth, consistent performance in your RC vehicle. 🏁
$8.99
-
Team Losi Racing Rear Arm Set V2 22X 22X-4 TLR-1084
Maintain proper rear suspension geometry and durability with the Team Losi Racing Rear Suspension Arm Set V2. These updated replacement arms are designed for the 22X platform and offer the strength and precision needed for competitive racing and hard track use. Manufactured to Team Losi Racing’s exact specifications, the V2 rear arms provide consistent flex characteristics and reliable performance, making them ideal for replacing worn or damaged components or keeping spares ready in your pit box. Features: V2 rear suspension arm design Precision molded for strength and consistency Maintains proper rear suspension geometry Durable construction for race conditions Genuine Team Losi Racing replacement part Includes: (2) Rear Suspension Arms Compatibility: Team Losi Racing 22X Team Losi Racing 22X-4
$11.99
-
Team Associated RC10B7 Rear Wing & Body Mounts Set 92417
The Team Associated 92417 Rear Wing & Body Mounts Set is a direct replacement designed for the RC10B7 1/10-scale buggy platform. This set restores proper rear wing positioning and body mounting alignment, making it ideal for repairs, rebuilds, or keeping race-day spares on hand. Manufactured to factory specifications for precise fit and durability. 🔧 Features Genuine Team Associated replacement parts Direct-fit rear wing and body mounts Maintains proper wing height and body positioning Ideal for maintenance, rebuilds, or race prep 📦 Includes (1) Rear Wing Mount (2) Rear Body Mounts ✅ Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D
$9.99
-
Team Losi Racing 22X AC Narrow Steering Spindle Knuckles (2) TLR-1086
The Team Losi Racing TLR-1086 AC Narrow Steering Spindle Knuckles are direct replacement components for the 22X 2WD buggy platform. Designed to factory specifications, these knuckles restore proper steering geometry and front-end durability for race or maintenance applications. Ideal for repairs, rebuilds, or keeping spares on hand for race day. 🔧 Features Genuine Team Losi Racing replacement parts AC narrow steering spindle design Precision-molded for accurate fit and alignment Direct replacement for stock components 📦 Includes (2) Narrow Steering Spindle Knuckles ✅ Compatibility Losi 22X Losi 22X-T
$8.99
-
R1WURKS B7 Series Front Ball Stud Mount Weight – 10g – Part # 900097-2
Dial in your front-end feel with precision balance and smoother steering control. The R1WURKS B7 Series 10g Front Ball Stud Mount Weight is a simple drop-in upgrade that adds stability, traction, and predictability to the nose of your buggy—especially in conditions where the front end needs extra bite. Why Add Front-End Weight? Adding a small amount of mass to the front of your buggy can: Increase front-end traction Improve initial steering response Enhance mid-corner stability Reduce front-end bounce for smoother handling Help balance overall weight distribution when paired with battery placement adjustments Features High-quality brass construction Precision CNC machining Engraved for quick identification True drop-in fitment for the R1WURKS B7 ball stud mount Included (1) 10g Brass Weight (1) M2.5x8 Button Head Screw
$7.99
-
Team Associated FT 13mm Shock Pistons, 2.5mm – 2x1.5mm (Part #91931)
Dial in your suspension for ultimate precision with the Factory Team 13mm Shock Pistons. The #91931 pistons feature two 1.5mm holes, offering maximum damping for high-traction surfaces and rough tracks where control is key. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.5mm hole configuration 2.5mm thickness ⚙️ Key Features: Compatible with 13mm Team Associated shock bodies CNC-precision molding ensures consistency Smaller hole size for slower rebound and increased pack Ideal for high-bite or rough surface tracks Tuning option for front or rear shocks on RC10B6.4, RC10B74.
$9.99
-
Team Associated RC10B6.4 Front Bulkhead Set (0° & 2.5°) – Part #91979
Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!
$9.99
-
Team Associated RC10B7 Aluminum Arm Mount "C Block" (92432)
Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.
$17.99
-
Team Associated RC10B6.3 Carbon Fiber "Wide Gull-Wing" Rear Shock Tower Part #: 91881
Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.
$22.09
-
Team Losi Racing 22 4.0 Laydown Idler Gear & Shaft (2 Gears, 1 Shaft) – TLR232069
Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.
$10.99
-
Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – 91974
Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974
$8.99
-
Team Associated 13mm Shock Spring Cup Set [91966]
Team Associated 13mm Shock Spring Cup Set [91966] 🌀 Fine-Tune Your Ride Height in Seconds! Dial in your suspension setup with this 13mm Shock Spring Cup Set from Team Associated. Whether you're going low or keeping it high, this kit includes 0mm, 5mm, and 9mm cups—giving you full control over ride height and spring preload. 🛠️ ✅ Fits 13mm shocks✅ Includes 0mm, 5mm, and 9mm cups✅ Perfect for on-the-fly tuning✅ Durable and precision-molded Includes:(4) 0mm Spring Cups(4) 5mm Spring Cups(4) 9mm Spring Cups 📦 Part Number: 91966🚗 Brand: Team Associated
$10.99
-
Team Associated Rear Suspension Arms, Hard: RC10B74
Team Associated Rear Suspension Arms, Hard: RC10B74 ASC92131
$12.99
-
Team Associated RC10B7 Top Plate & Ballstud Mount Set 92403
Team Associated RC10B7 Top Plate & Ballstud Mount Set. This replacement set is intended for the Team Associated RC10B7 1/10 buggy. Package includes one top plate and one ballstud mount. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D
$13.99
-
Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478
Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.
$19.99
-
Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477
Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477 Precision Suspension Tuning for the RC10B7 The Factory Team +2mm Ballstud Mount is a premium upgrade for serious racers. Machined from lightweight aluminum and anodized in signature blue, this mount allows for fine-tuning of rear camber link geometry, improving handling and cornering stability on the track. ⚙️ Features: ✅ +2mm Height – Raises rear camber link mount for improved roll center adjustment ✅ CNC-Machined Aluminum – Durable and lightweight ✅ Blue Anodized Finish – Factory Team look and corrosion resistance ✅ Increased Setup Options – Perfect for dialing in rear-end grip and handling on high-traction surfaces 📦 Includes: (1) +2mm Blue Aluminum Ballstud Mount Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Ideal for racers looking to fine-tune rear suspension geometry for high-performance setups.
$19.99
-
1UP Racing 5mm LowPro Bullet Plugs (2)
1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!
$3.99
-
JConcepts Pin Swag LP Wide 2.2" 2WD Front Buggy Carpet Tires (2) (Purple) JCO4062-011
The JConcepts Pin Swag LP Wide 2.2" 2WD Front Buggy Tires combine two proven tread concepts to deliver precise steering and high-grip performance on carpet and Astroturf surfaces. Designed with a low-profile wide carcass, the Pin Swag provides smooth transitions through corners while maintaining stability at both high and low speeds. This Purple compound version blends Swagger-inspired outer lugs with a dense field of round pins for confident steering response and consistent traction in competitive 1/10 scale 2WD buggy racing. About the Pin Swag LP Wide Front Tires Blended Pin & Swag Tread The Pin Swag combines the outer lug concept of JConcepts' Swagger tire with a dense arrangement of crisp, round pins. The result is a front tire designed to provide a balanced combination of steering response, forward traction, and stability. Low-Profile Wide Carcass The low-profile carcass helps the tire transition smoothly through corners while minimizing unwanted movement at speed. The 2.2" bead is designed to fit compatible LP Wide 2WD buggy front wheels, including the JConcepts Mono 2.2" LP Wide Front Wheels. Steering-Focused Design A split center section provides additional flexibility and surface conformity, while staggered tread elements create directional bite. A vertical rib further sharpens steering response for precise control on tight indoor racing surfaces. Lightweight Bead The scalloped tire bead helps reduce rotating weight while also assisting with tire alignment during mounting and gluing. Features ✔ Designed for 1/10 scale 2WD buggy front applications✔ Purple compound✔ Low-profile wide carcass✔ Pin and Swag combination tread design✔ Crisp round pins with wide bases for stability✔ Split center section for increased surface conformity✔ Staggered tread elements for directional bite✔ Vertical rib for responsive steering✔ Dense pin layout helps minimize wear✔ Smooth sidewall transition with steering-focused ledge✔ Scalloped bead helps reduce rotating weight✔ 2.2" wheel compatibility✔ Designed for carpet and Astroturf racing Includes (2) JConcepts Pin Swag LP Wide 2.2" 2WD Front Buggy Tires – Purple Specifications Specification Details Brand JConcepts Part Number JCO4062-011 Product Pin Swag LP Wide Scale 1/10 Position Front Vehicle Type 2WD Buggy Compound Purple Wheel Diameter 2.2" (55.88mm) Surface Carpet / Astroturf Notes Tires are supplied unmounted. Designed for compatible 2.2" LP Wide 2WD buggy front wheels. JConcepts Mono 2.2" LP Wide Front Wheels (JCO3376) are compatible and sold separately. Wheels, inserts, and tire glue are not listed as included and are sold separately.
$17.25
-
Team Losi Racing 22X AC Sway Bar Link Set – TLR-1112
The Team Losi Racing 22X AC Sway Bar Link Set (TLR-1112) is a replacement sway bar linkage set designed for the TLR 22X 2WD buggy platform. These links connect the sway bar system to the suspension, helping maintain consistent chassis balance and improved cornering stability. Built to OEM specifications, this set is perfect for replacing worn components or refreshing your suspension setup to keep your buggy performing at its best on the track. Features• Genuine Team Losi Racing replacement part• Designed for the TLR 22X 2WD buggy platform• Maintains proper sway bar operation and suspension balance• Ideal for maintenance, repairs, or race-day spares Includes• (1) AC Sway Bar Link Set
$15.99
-
Vision Racing (VR) TLR 22X & 22X-T Front Aluminum Pivot (0°) – 00487
Dial in precise front-end geometry with the Vision Racing (VR) Front Aluminum Pivot for the TLR 22X and 22X-T platforms. This zero-degree front pivot is designed for racers looking for a neutral, predictable steering feel with consistent suspension movement. Machined from aluminum and weighing in at just 9 grams, this pivot delivers strength and accuracy without unnecessary weight, making it ideal for high-grip or finely tuned race setups. Features & Benefits: 0° front pivot for neutral front-end geometry Precision-machined aluminum construction Lightweight design at 9g total weight Improves consistency and suspension alignment Race-focused upgrade for refined handling Compatibility: TLR 22X AC TLR 22X DC TLR 22X-T Includes: (1) Vision Racing Front Aluminum Pivot (0°) A clean, precise tuning option for racers looking to lock in front suspension geometry with confidence and consistency.
$25.00