Built for serious stock racing. The Reedy Stockstar 2S Low Profile Shorty 160C LiPo is engineered specifically for the demanding power requirements of 1/10 stock class on-road and off-road competition. Developed with input from experienced stock racers, this battery delivers consistent voltage, low internal resistance, and efficient power delivery — exactly what you need when every tenth counts. Refined cell formulation and precision manufacturing result in higher average discharge voltage and reduced power loss. The lightweight low-profile shorty layout improves chassis balance and lowers center of gravity, helping maximize corner speed and stability. Embedded low-resistance 5mm bullet connectors reduce electrical resistance and increase efficiency, while the durable hard case protects against race-day abuse. With a 160C discharge rating and ROAR approval, this pack is ready for competition at any level. Features: Designed for 1/10 stock class on-road and off-road racing Advanced cell formulation reduces internal resistance Increased average discharge voltage for stronger mid-run performance Low-profile shorty design improves balance and handling 160C continuous discharge rating Embedded 5mm low-resistance bullet connectors Developed with input from experienced stock racers ROAR Approved Specifications: Nominal Voltage: 7.4V (2S) Capacity: 5000mAh Maximum Charge Rate: 3C Continuous Discharge: 160C Watt Hours: 37Wh Battery Connector: 5mm Bullets Balance Connector: 2mm Bullet Dimensions: 96x47x20mm (3.78x1.85x0.79in) Weight: 178g (6.28oz) Includes: (1) Reedy Stockstar 2S Low Profile Shorty 160C LiPo Battery Important LiPo Safety Information: Always balance charge lithium batteries Never leave batteries unattended while charging Never charge a battery inside your model Use only a LiPo-specific charger Do not over-discharge (never below 3.2V per cell) Use a LiPo-safe charging bag or box Allow battery to cool before recharging For best cycle life, fully charge before first use and limit the first five cycles to approximately 50% discharge.

Read more less

⚡ Spektrum RC 7.4V 1400mAh 2S 30C Smart G2 LiPo Battery (IC2) ⚡ 🔋 Compact Power with Smart Technology! Upgrade your RC performance with the Spektrum 7.4V 1400mAh 2S 30C Smart G2 LiPo Battery! Designed for consistent power delivery, fast charging, and Smart technology integration, this battery ensures maximum performance and reliability for your RC adventures. 🚀 With a 30C discharge rate, this hard-case Smart LiPo is built to provide long-lasting power for your Arrma Grom series and Losi NASCAR models. The IC2 connector ensures secure and efficient power transfer, while Spektrum's Smart G2 technology allows for one-step charging, auto-discharge, and real-time battery monitoring when paired with Smart chargers. ✅ 🔹 Key Features: ✅ High-Capacity 1400mAh LiPo – Delivers reliable and consistent power.✅ 30C Discharge Rate – Strong, stable performance for high-demand RC vehicles.✅ Spektrum Smart G2 Technology – One-step charging, auto-discharge, and battery monitoring.✅ IC2 Connector – Provides a secure and efficient power connection.✅ Hard Case Design – Protects against impacts for long-lasting durability.✅ Fast Charging (5C Max) – Get back on the track quicker with a high charge rate. 📦 Includes: ✔️ (1) Spektrum 7.4V 1400mAh 2S 30C Smart G2 LiPo Battery (IC2 Connector) 📏 Specifications: 🔹 Voltage: 7.4V (2S)🔹 Capacity: 1400mAh🔹 Discharge Rate: 30C🔹 Maximum Charge Rate: 5C🔹 Connector Type: IC2🔹 Battery Type: Smart G2 Hard Case LiPo 🔗 Compatibility: 🔸 Arrma Granite Grom🔸 Arrma Mojave Grom🔸 Arrma Typhon Grom🔸 Losi NASCAR 💡 Upgrade your battery game with Smart Technology! Enjoy better power, faster charging, and enhanced battery life with the Spektrum Smart G2 1400mAh LiPo. Perfect for bashing, racing, and high-performance RC fun! 🔋🔥 #SpektrumSmart #LiPoBattery #RCBattery #RCPerformance #ArrmaGrom #LosiNASCAR #RCUpgrades

Read more less

Arrma Grom Assembled Oil-Filled Differential (30T) – Pre-Built & Ready to Install! ⚙️ Upgrade or Replace Your Differential with Ease! The Arrma Grom Assembled Oil-Filled Differential (30T) is a pre-assembled, high-performance replacement for the Granite Grom, Mojave Grom, Typhon Grom, and Losi NASCAR. Built for smooth power transfer and consistent handling, this durable, oil-filled diff is designed to withstand the rigors of off-road and high-speed racing. With two complete differentials and four included bearings, installation is quick and hassle-free! 🛠 Features:✔️ Pre-Assembled & Oil-Filled – No setup required, just install and go!✔️ Durable 30T Gear Design – Built for reliability and smooth operation✔️ Optimized for Performance – Maintains traction and power distribution✔️ Includes Bearings – Everything needed for a hassle-free replacement 📦 Includes: (2) Pre-Assembled Oil-Filled Differentials (30T) (4) Bearings 🚗 Compatibility:✅ Arrma Granite Grom✅ Arrma Mojave Grom✅ Arrma Typhon Grom✅ Losi NASCAR 🔩 Upgrade Your RC Car for Maximum Performance!

Read more less

⚡ Spektrum RC Smart PowerStage Surface Bundle w/2S Smart 30C LiPo Battery (1400mAh) (IC2) ⚡ 🔋 The Ultimate Compact & Smart Charging Solution! Looking for a fast, reliable, and compact way to power your RC vehicle? The Spektrum Smart PowerStage Surface Bundle is designed to deliver big power in a small package, making it the perfect upgrade for your Arrma Grom 223S series or other small-scale RC vehicles. 🚀 This bundle includes the S100 Smart USB-C Charger and a 2S 1400mAh 30C Smart G2 LiPo Battery, bringing cutting-edge Smart technology to your setup. Enjoy one-step charging, automatic battery recognition, and balance charging with a single connection—no more separate balance leads! ✅ 🔹 Key Features: ✅ Advanced Smart Charging Technology – Auto-detects battery type & begins safe charging instantly.✅ Simple 1-Step Connection – No extra balance leads required with Smart G2 LiPos.✅ USB-C Powered – Convenient and portable for easy charging anywhere.✅ High-Capacity 2S 1400mAh LiPo – Delivers consistent power for long run times.✅ 30C Discharge Rate – Provides smooth, reliable power delivery.✅ Fast Charging with 5C Maximum Rate – Get back to action quicker!✅ Integrated Smart Features – Monitors battery health, prevents over-discharge, and extends lifespan.✅ Durable Hard Case Battery Design – Added protection for long-lasting performance.✅ IC3 & IC5 Compatible – Works with EC3 & EC5 connectors for flexible charging options.✅ Perfect for Smaller Scale RC Vehicles – Specifically designed for the Arrma Grom 223S series. 📦 Includes: ✔️ (1) Spektrum S100 1x100W USB-C Smart Charger✔️ (1) Spektrum 2S 1400mAh Smart 30C LiPo Battery (IC2 Connector)✔️ (1) 65W USB-C Power Supply✔️ (1) Battery Adapter✔️ (1) Product Instruction Manual 📏 Specifications: Charger: 🔹 Input Power: DC🔹 Input Connector: USB-C🔹 LiPo Compatibility: 1-4S🔹 Charge Power: 1x100W🔹 Dimensions: 3.86 x 2.83 x 1.42in (98 x 72 x 36mm)\ Battery: 🔹 Nominal Voltage: 7.4V (2S)🔹 Capacity: 1400mAh🔹 Maximum Charge Rate: 5C (7A)🔹 Continuous Discharge Rate: 30C🔹 Battery Connector: IC2🔹 Dimensions: 3.96 x 1.24 x 0.84in (101 x 31 x 21mm)🔹 Weight: 2.99oz (85g)\ 🏁 Needed to Complete: 🚫 Nothing! Just plug in and charge! 💡 Excellent Solution for Small RC Vehicles! Whether you're looking for faster charging, safer battery management, or ultimate convenience, the Spektrum Smart PowerStage Bundle has you covered. 🔋 Upgrade your power system today and stay ahead of the competition! 🚀 #SpektrumSmart #LiPoBattery #SmartCharger #RCCharging #RCPerformance #ArrmaGrom #RCUpgrades

Read more less

Furitek SCORPION PRO 5600kV Sensored Brushless Combo🔥 For Grom & NASCAR – Next-Level Power and Control 🔥 Designed for 1/18 scale platforms like the Arrma Grom and Losi NASCAR, the Furitek SCORPION PRO delivers elite brushless performance in a compact, easy-to-install system. Featuring sensored motor tech, built-in wireless programming, and waterproof durability, this ESC and motor combo is ready to dominate. 🏁 Why SCORPION PRO? Sensored 4-Pole Power: Precise, ultra-smooth throttle response Wireless Tuning: Adjust ESC settings via the Furicar App (iOS/Android) Compact & Lightweight: Designed specifically for 1/18 platforms Waterproof Design: All-weather ready for trail or track Plug & Play Fit: Drop-in upgrade for Arrma Grom and Losi NASCAR 📱 App-Controlled ConvenienceTweak throttle, braking, and more – live and on the go – no cables required. Get real-time telemetry and updates wirelessly. ⚙️ Specs (ESC): Continuous Current: 60A Burst Current: 100A Voltage: 2S LiPo BEC: 5.5V–7.4V @ 5A Programming: Furicar App Connectors: EC2 battery, 3-pin motor Weight: 0.705oz (20g) ⚙️ Specs (Motor): KV Rating: 5600kV Voltage: 2S LiPo Output: 450W Size: 28x35mm Shaft: 2mm x 12mm Weight: 2.11oz (60g) 📦 Includes: (1) SCORPION PRO Waterproof ESC w/ Wireless Module (1) 5600Kv IMPULSE Brushless Sensored Motor w/19T 0.5M Pinion (1) Sensored Cable (1) Signal Cable (1) User Manual 💡 Unmatched torque. Real-time tuning. Built for serious racers and hobbyists. Get the most out of your mini RC with Furitek's most advanced system yet.

Read more less

Losi NASCAR Tuning Shock Springs Set (7–11 lb/in) (2)PART: LOS-1933 Fine-tune your suspension for any track condition with this Tuning Shock Springs Set for the Losi 1/12 NASCAR platform. Featuring five sets of springs with varying rates from 7 to 11 lb/in, this optional upgrade lets you dial in the perfect setup for performance and handling. Features: Designed for the Losi 1/12 NASCAR platform Five spring rates included: 7, 8, 9, 10, and 11 lb/in Improve handling, traction, and overall control Ideal for adapting to different track surfaces and conditions Includes: (5) Sets of Shock Springs (2 springs per set) Essential tuning option for racers seeking precise suspension customization.  

Read more less

Upgrade your steering precision and strength with the Losi NASCAR Aluminum Clamping Servo Horn. Designed specifically for the Losi NASCAR racecar, this 20-tooth servo horn delivers superior rigidity and durability compared to the stock plastic arm. Machined from high-quality aluminum and featuring a clamping design, it ensures a secure fit on your servo spline — perfect for high-performance racing applications. 🔥 Key Features: CNC-machined aluminum construction for maximum strength Clamping design provides a tight, slip-free hold on servo spline 20T spline fits most standard Losi/NASCAR-compatible servos Increased steering precision and reliability Lightweight, rigid design enhances steering response Direct replacement for stock plastic horn ✅ Compatibility: Losi NASCAR Racecar Servos with 20T output spline (EcoPower, Savox, Spektrum, and others using 20T pattern) 📦 Includes: (1) Aluminum Clamping Servo Horn (20T) (1) Clamping Screw and Hardware ⚠️ Tip:Always snug the clamping screw after tightening the servo horn bolt to ensure a solid, slip-free fit during high-torque operation.  

Read more less

Losi 1/12 NASCAR 2024 Chevy Camaro Body (Clear)PART: LOS-1938 Stand out from the pack with this officially licensed Losi 1/12 NASCAR 2024 Chevy Camaro Body. Pre-trimmed and ready for paint, this clear body lets you bring your own design and colors to the track for a truly custom look. Built for durability and performance, it includes a molded wing, decals, and window masks for a clean finish. Features: Officially licensed by Chevrolet Clear, unpainted body – ready for your custom design Pre-trimmed for convenience Durable molded rear wing with mount Includes authentic decal and window mask sheets Includes: (1) 1/12 NASCAR 2024 Chevy Camaro Clear Body (1) Rear Wing & Mount (1) Decal Sheet (1) Window Mask Sheet Note: Painted body shown for reference only. Actual product is clear and unpainted.

Read more less

Losi NASCAR® Goodyear Eagle Pre-Mounted Tires (4) – Medium Compound 🏁 Officially Licensed NASCAR® Goodyear Eagle Tires! Upgrade or replace your Losi 1/12 NASCAR tires with the Losi NASCAR® Goodyear Eagle Pre-Mounted Tires. These officially licensed tires deliver authentic scale looks and consistent performance for your oval racing needs. Designed for precision handling and durability, these pre-mounted tires make installation effortless—just swap and race! 🛠 Features:✔️ Official NASCAR® Goodyear Eagle Branding – Realistic scale appearance✔️ Pre-Mounted Convenience – No glue or assembly required✔️ Medium Compound – Balanced grip and durability✔️ Perfect Fit for Losi 1/12 NASCAR Models 📦 Includes: (4) Pre-Mounted Losi NASCAR Goodyear Eagle Tires (Medium Compound) 🚗 Compatibility:✅ Losi 1/12 NASCAR 🔥 Race-Ready Performance with True NASCAR Scale Looks!

Read more less

Upgrade your Losi NASCAR or Arrma Grom with this Adjustable Camber and Steering Turnbuckles Set. Designed to provide quick and precise tuning options, this set allows for easy camber and toe-in adjustments to optimize handling and performance on any surface. Features: Optional upgrade for Losi NASCAR and Arrma Grom platforms Enables adjustable camber and toe-in settings Durable metal construction for long-lasting performance Easy to install and adjust for fine-tuning your setup Includes: (6) Turnbuckles Perfect for racers and hobbyists looking to fine-tune their ride with pro-level adjustability.  

Read more less

Precision Steering. Proven Durability. Refresh or upgrade your steering setup with the Team Associated V2 Caster & Steering Blocks Set, designed specifically for the RC10T7 and RC10SC7 platforms. Built with Factory Team precision, these components deliver smooth steering response, consistent caster geometry, and the toughness to handle intense race conditions. V2 Performance Upgrade The updated V2 design refines steering feel and durability for improved handling and corner-entry precision. Whether you’re maintaining your race truck or tuning for optimal performance, these blocks keep your setup tight, aligned, and race-ready. Features: Genuine Team Associated V2 design for RC10T7 / RC10SC7 Provides precise steering response and consistent caster angle Durable composite construction built for high-stress racing Factory Team engineered for reliability and fit Includes: (1) RC10T7 V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.    

Read more less

Power your LC Racing vehicle with the LC Racing 2200mAh 7.4V 50C Hardcase LiPo Battery, a compact high-performance pack built for power, consistency, and durability. Co-engineered with Gens Ace, this LiPo delivers strong punch, reliable voltage, and long cycle life in a perfectly sized hardcase pack for LC Racing’s 1/14–1/16 platforms. 🔥 Key Features: Genuine Gens Ace-manufactured LiPo, branded for LC Racing 2200mAh 7.4V (2S) capacity with 50C discharge rate Hardcase design protects against impact and puffing Compact dimensions: 18×32×93mm, weight 100g Includes foam spacer for a snug fit in smaller battery trays Comes with charge/balance adapter (3.5mm bullets to Deans-style T plug) Ideal for racers needing dependable, high-output performance ✅ Compatibility: LC Racing BHC, EMB, PTG, and other 1/14–1/16 scale vehicles Works in other mini RC models using 2S LiPo with Deans connector 📦 Includes: (1) LC Racing 2200mAh 7.4V 50C Hardcase LiPo Battery (1) Short charge/balance adapter (3.5mm bullet to Deans-style T plug) (1) Foam spacer for fitment adjustment ⚠️ Tip:Always charge using a LiPo-compatible charger in balance mode, and never leave unattended while charging. Check voltage before storage to maintain battery health. 🏎️ Recommended For: 1/14–1/16 scale Buggy, Rally, and Truggy racing applications Perfect drop-in power upgrade for LC Racing EMB and BHC platforms

Read more less

Upgrade your Losi NASCAR or Grom with this premium Metal Axle Set. Designed for durability and performance, this set features CVD-style front axles for improved strength and a tighter turning radius, steel rear dogbones for rigidity, and aluminum hexes with locking screws to prevent stripping. Whether you're bashing or racing, this kit adds serious toughness and precision to your ride. Features:• CVD-style front axles offer superior strength and tighter steering• Steel rear dogbones for long-lasting durability• Aluminum hexes with locking screws prevent wheel stripping• Converts to universal aluminum locking hex system Includes:• (2) Front Universal Driveshafts• (2) Rear Stub Axles• (4) Aluminum Locking Hexes w/ Screws• (4) Wheel Nuts• (4) Drive Shaft Pins

Read more less

Meet the EcoPower WP173 — a high-voltage, high-torque, high-speed aluminum micro servo built to dominate the 1/16 & 1/18 scale world. Waterproof, fully metal-geared, and engineered for precision, this servo is the ultimate upgrade for Traxxas®, Axial®, Losi®, Arrma® Grom™, TRX-4M™ (with mount), and more. Designed for brutal performance and long-term durability, the WP173 packs a coreless motor, an aluminum case, and torque numbers that punch way above its size. High-Performance Speed & Torque Whether you're racing, crawling, or bashing, the WP173 delivers lightning-fast response and incredible power: Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Smooth, crisp control — even under heavy load. Built for Abuse This servo is ready for the rough stuff: Full metal gear train Waterproof aluminum case Ball-bearing supported output Includes aluminum servo horn Long-lasting durability for harsh environments Wide Compatibility A true drop-in powerhouse for most micro platforms: Arrma® Grom Series:Gorgon • Granite • Mojave • Quake • Typhon Axial:1/18 Yeti Jr FMS:FCX18 • FCX24 • FCX24M Furitek:Cayman • Cayman Pro • FX118 • Gold Digger • Hiroyama • TerraX Losi:Mini Drag • Mini-B • Mini-T 2.0 • NASCAR Redcat:Ascent-18 Traxxas:TRX-4M™ & TRX-4MT™ (Requires EcoPower CNC Aluminum Servo Mount ECP-3072) Features: High torque + high speed performance Waterproof aluminum case Digital coreless motor Full metal gear construction Aluminum servo horn included 25-tooth output shaft (standard micro) Operates from 6V–8.4V Compact size for 1/16 & 1/18 models Built for racers, crawlers, and bashers Includes: (1) EcoPower WP173 Aluminum Digital Micro Servo (1) Aluminum Servo Horn (2) Composite Servo Horns Mounting Hardware Specifications: Application: 1/24, 1/16, 1/18 Input Voltage: 6V–8.4V Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Motor: Digital Coreless Output Shaft: 25T • 5mm Gear Material: Metal Dimensions: 23 × 12 × 31.75mm Weight: 23g Tech Notes: Do not exceed 8.4V. Waterproof, but prolonged submersion may weaken seals. TRX-4M platforms require the EcoPower ECP-3072 Aluminum Servo Mount.

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

⚙️ Built stronger. Built to last. Upgrade your ride with the Hot Racing Front Steel CVD Axle Set, designed for the Losi NASCAR and the Arrma Grom series (Granite Grom, Mojave Grom, Typhon Grom) equipped with the Arrma Grom Suspension B Set. Featuring CNC-machined steel stub shafts and aluminum clamp-style hex hubs, these axles deliver superior strength, durability, and smooth performance over stock CVD dog bones and plastic shafts. ✅ Direct replacement for factory CVD dog bones✅ Heavy-duty CNC steel + aluminum construction✅ Pre-assembled for quick, hassle-free install✅ Compatible with ARA330839 front arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Losi 1/12 NASCAR 2024 Toyota Camry Body (Clear)PART #: LOS-1918 Give your Losi NASCAR a personal touch with the officially licensed 2024 Toyota Camry body. This clear, pre-trimmed shell is ready for custom paint, allowing you to stand out on the track or show off your signature style. Designed for the Losi 1/12 NASCAR platform, this body includes a molded rear wing, window masks, and a detailed decal sheet to bring your design to life. Whether you're racing hard or putting it on display, this Camry body delivers authentic Toyota detail with high-quality fit and finish. Features: Officially licensed by Toyota to Losi Pre-trimmed clear body – ready for custom paint Molded rear wing and wing mount included Includes officially licensed decals and window masks Designed for the Losi 1/12 NASCAR platform Includes: (1) Clear 2024 Toyota Camry NASCAR Body (1) Rear Wing & Mount (1) Decal Sheet (1) Window Mask Sheet  

Read more less

Upgrade your steering precision and durability with the Losi NASCAR Aluminum Bell Crank Set. Machined from strong, lightweight aluminum, this precision-engineered set eliminates slop from the factory steering system while maintaining consistent steering angles and control — even under high-impact racing conditions. ✅ Precision Aluminum Construction – Adds strength and eliminates flex for more accurate steering✅ Direct Factory Upgrade – Installs easily using existing hardware✅ Improved Durability – Designed to absorb impacts and maintain alignment✅ Gunmetal Finish – Sleek, race-ready look Includes: (1) Aluminum Bell Crank Set (6) Sleeves ⚡ Take control of every turn — upgrade to the Losi Aluminum Bell Crank for smoother, more consistent steering performance.

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Assembled Differential 30T 0.8Mod V2 (1): GROMARRMA – ARA311177V2 Keep your 1/12 Losi NASCAR RC Race Car running smooth with the ARRMA Assembled Differential 30T 0.8Mod V2. This factory-assembled differential is built for durability and precision, ensuring efficient power transfer and reliable performance on the track. ⚡ Features: Fully assembled 30T 0.8Mod differential Heavy-duty design for consistent performance Precision fit for long-lasting durability Direct drop-in replacement for easy installation 📦 Includes: (1) Assembled Differential 30T 0.8Mod V2 Compatibility: ARRMA GROM 1/12 Losi NASCAR RC Race Car Part #: ARA311177V2

Read more less

Smooth. Precise. Reliable.Keep your Arrma Grom-series vehicles running flawlessly with genuine Arrma 7x11x3mm Ball Bearings (ARA610053). These high-quality bearings reduce friction, improve drivetrain efficiency, and extend the life of your gears and shafts—essential for smooth, consistent performance on every run. Factory Fit. Race Ready.Each bearing is precision-sealed to resist dirt and moisture while maintaining low rolling resistance. Perfect as direct replacements for worn or gritty stock bearings, they’re built for long-lasting durability in both on-road and off-road conditions. 💪 Features: Genuine Arrma replacement part Precision-sealed bearings for smooth rotation and protection against debris Reduces drivetrain friction and wear Ideal for high-speed, high-load applications Direct fit for Grom-series vehicles 📦 Includes: (4) 7x11x3mm Ball Bearings ✅ Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Mojave Grom Arrma Quake Grom Arrma Typhon Grom Losi NASCAR    

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Bring the heat to the oval with this officially licensed Goodyear® & NASCAR® tire set, made exclusively for your Losi® NASCAR® RC race car. Pre-mounted on sharp-looking gunmetal gray split-spoke wheels, these Pro-Line soft compound tires deliver realistic looks and competitive traction. 🟡 Features: Officially licensed by Goodyear® & NASCAR® Soft compound for improved grip and racing performance Yellow sidewall lettering for ultra-scale realism Pre-mounted on 8mm hex gunmetal split-spoke wheels Made in the USA by Pro-Line 📦 Includes:(4) Pre-mounted Goodyear Eagle NASCAR Cup Series Tires on Gunmetal Wheels• Front or Rear use 📐 Specs: Tire Height: 2.23" (57mm) Tire Width: 1.1" (28mm) Wheel Hex: 8mm Insert: Open Cell Foam Compound: Soft Color: Gun Metal Tread: Goodyear Eagle Slick 🚗 Compatibility:• All 2024 & 2025 Losi NASCAR RC Racecar models  

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Engineered for compact performance, the Zeda Power 1500mAh 2S LiPo is the perfect power source for your LC Racing BHC-1 or other mini RC platforms. With a high 60C discharge rate and a compact footprint, this pack delivers punchy acceleration and consistent runtime in tight spaces. ⚙️ Specifications: Capacity: 1500mAh Voltage: 7.4V (2S) Discharge Rate: 60C Dimensions: 17.5 x 35 x 69mm Plug Type: T Plug (Deans-style) Balance Lead: Yes (JST-XH) ✅ Perfect For: LC Racing BHC-1 • • Other 1/14 & 1/16 scale mini RC models requiring a compact 2S LiPo

Read more less

Take a trip back to the glory days of NASCAR® with the officially licensed 1996 Ford® Thunderbird Clear Body for the Losi® NASCAR® Racecar! 🏁 Pro-Line captures all the legendary details of this 4th-gen stock car so you can relive the 90s or recreate your favorite racing hero’s scheme. 🔥 Features: Officially Licensed by NASCAR® and Ford® Incredible scale details from the 1996 season Pre-cut clear body for faster prep time Includes custom black rear spoiler and hardware Extensive decal sheet & window masks included Durable crystal-clear polycarbonate with paint-then-peel overspray film Made in the USA 🇺🇸 In the Box: (1) Pre-Cut 1996 Ford® Thunderbird Clear Body (1) Black Rear Spoiler (1) Spoiler Mounting Hardware Set (1) Extensive Pre-Cut Decal Sheet (1) Window Mask Sheet (1) Paint-Then-Peel Overspray Film Compatibility: Fits all 2024–2025 Losi® NASCAR® Racecars Note: Sold as an unpainted clear body. Painted image for display only. Tires not included — pair with Pro-Line Goodyear® Eagle Tires (PRO1025910) for an era-correct look.

Read more less

Keep your steering sharp and your servo protected with the Arrma Grom Servo Saver Set. Designed as a direct replacement for stock components, this set offers a precise fit and easy installation on multiple 1/18 and 1/12 scale platforms. 🔧 Features:✅ Direct replacement for stock servo saver✅ Protects your servo during impacts✅ Factory-installed on Grom series and Losi NASCAR✅ Precision fit for quick and easy install 📦 Includes:(1) Servo Saver Set 🚗 Compatibility:• Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi 1/12 NASCAR Race Car

Read more less

Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty – High-Performance, Low-Profile Power! Maximize your racing potential with the Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo, engineered with cutting-edge advancements in LiPo cell manufacturing and battery construction. Designed for elite on-road and off-road competition, this battery delivers higher power output, lower internal resistance, and increased durability, ensuring consistent voltage from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Improves efficiency, reliability, and power output.✅ High-Voltage (HV) 7.6V Design – Safely charges to 4.35V/cell for maximum performance.✅ Flat Discharge Curve – Sustains higher voltage deeper into the race for consistent power delivery.✅ High Capacity & 135C Discharge Rate – Delivers explosive acceleration and extended runtime.✅ Durable Hard Case – Protects against damage in high-impact racing environments.✅ Low-Resistance Embedded Connectors – Minimizes power loss for peak efficiency.✅ ROAR & BRCA Approved – Legal for competitive racing.✅ Male ESC Connectors Included – Ensures plug-and-play compatibility. Precision Power for Competitive Racing! 🏁 Why Choose the Reedy Zappers SG6 4000mAh? Low-profile (LP) design for better weight distribution and improved handling. Higher voltage retention throughout the race ensures stronger acceleration and consistent performance. Ideal for both on-road & off-road racing, including 1/8 eBuggy and 1/10 scale competition. Proven durability and extended cycle life for long-lasting, race-winning performance. 🔥 Race with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4000mAh Voltage: 7.6V (2S) Max Charge Rate: 8.0A Discharge Rate: 135C Dimensions: 95.8mm x 46.8mm x 18.5mm Weight: 162g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4000mAh 135C LP Shorty is designed for racers demanding high-voltage, low-profile performance. Whether you're competing in tight indoor tracks or wide outdoor circuits, this power-dense battery delivers the speed, consistency, and durability needed to win. 🔥 Upgrade your setup today and experience next-level power with Reedy Zappers SG6! 🏁💨

Read more less

🏁 Secure Body Fit & Proper AlignmentThe Losi NASCAR® Body Mount Set is a direct replacement designed to keep your 1/12 scale NASCAR body mounted securely and aligned properly. Whether you're replacing damaged mounts or refreshing worn components, this set ensures a solid body fit for consistent performance and clean body positioning on the track. Ideal for maintenance, repairs, or keeping a spare set in your pit box. ✅ Direct replacement for Losi 1/12 NASCAR platform✅ Maintains proper body alignment and fitment✅ Durable construction for racing conditions✅ Easy installation with included hardware✅ Perfect for repairs and routine maintenance 📦 Includes:(2) Body mounts(4) Body postsMounting hardware 💡 Pro Tip: Set body height evenly on both sides to maintain balanced handling and prevent tire rub during cornering.  

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

Upgrade rear drivetrain strength and durability with this Powerhobby aluminum rear gear box. CNC-machined from aluminum and anodized for a clean finish, this gearbox is a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA320749Part Number: PHB6564 Ideal for racers and bashers looking to improve rear-end durability and add a custom look to their Grom or NASCAR platform.  

Read more less

The Spektrum Smart G2 Powerstage Surface Bundle delivers a complete, high-performance charging and battery solution for micro and mini RC platforms. Perfect for vehicles like the Losi Mini-T 2.0, Mini-B, Mini LMT, Axial UTB18 Capra, and more, this kit includes everything needed to power up with Smart simplicity: a Smart charger, Smart LiPo battery, GaN power supply, and IC2→IC3 adapter. Designed for maximum convenience and safety, Smart G2 technology handles charging, balancing, storage mode, data logging, and battery health management—all automatically. 🔋 About the PowerStage Surface Bundles Smart G2 Technology The included Spektrum S100 Smart USB-C Charger automatically detects battery type, chemistry, and ideal settings. Simply plug in a Smart battery and charging begins—no balance leads required, no menus to navigate. 810mAh 2S 50C Smart G2 LiPo This compact performance pack features an integrated Smart microchip that tracks usage, temperature, cycles, and health data. Built-in Smart Discharge brings the battery safely to storage voltage, extending overall lifespan. High-Efficiency GaN Power Supply The included 65W GaN power supply delivers strong, cool-running performance with a compact footprint and folding AC plug—perfect for pits, home use, or travel. IC2 to IC3 Adapter Included Ensures full Smart functionality regardless of connector type, while maintaining signal integrity and low resistance. ⭐ Key Features Automatic Smart battery detection & setup Single-connection charging/balancing—no balance wire needed Up to 100W fast charging USB-C input for modern connectivity GaN power supply reduces heat and size Smart battery logs performance/error data Built-in Smart Discharge for safe storage 50C continuous discharge rating Adapter maintains full Smart functionality across connector types 📦 Includes (1) Spektrum S100 USB-C Smart Charger (1) Spektrum G2 Smart 2S 50C LiPo (810mAh, IC2) (1) 65W GaN Power Supply (1) IC2 Battery → IC3 Charger Adapter Product Manual Needed to Complete:Nothing — ready to use. 📊 Specifications Charger Input: 5–20V DC (USB-C) Charge Power: Up to 100W Battery Types: LiPo/LiHV/LiFe (1–4S); NiMH/NiCd (1–12S) Output Connectors: IC3 / IC5 Balance Port: JST-XH Size: 3.86 × 2.83 × 1.42" (98 × 72 × 36 mm) Battery Voltage: 7.4V (2S) Capacity: 810mAh Max Charge: 1C (0.8A) Continuous Discharge: 50C Connector: IC2 Dimensions: 2.2 × 1.2 × 0.78" (58 × 32 × 20 mm) Weight: 2.29oz (65g) ⚠️ LiPo Safety Notes Never leave a LiPo unattended while charging Always balance charge Use a LiPo-safe bag or enclosure Do not over-discharge Allow battery to cool before recharging Store below 35°C and avoid enclosed hot spaces

Read more less

Reliable Power. Smooth Performance. Track-Ready Replacement. Keep your Losi NASCAR AWD Race Car running strong with the Losi 380 Sized Brushed Motor (28T). Designed as a direct replacement motor for the Losi 1/12 NASCAR platform, this factory-spec unit delivers smooth, consistent power and reliable performance — perfect for racers who demand dependable speed and torque on every lap. Consistent, Efficient Power Featuring a brushed 380-sized design, this motor ensures strong acceleration and responsive throttle control, giving your car the edge it needs on straightaways and through corners. Built for long-lasting durability, it’s ready to drop in and perform right out of the box. Features: Direct replacement for Losi 1/12 NASCAR AWD Race Cars 380-sized brushed motor provides balanced power and torque Smooth, consistent operation for reliable track performance Durable construction for extended use and easy maintenance Factory-tuned for plug-and-play installation Includes: (1) Losi 380 Sized Brushed Motor (28T) Compatibility: Losi 1/12 NASCAR AWD Race Car Losi — Proven Power. Championship Performance.

Read more less

Overview:Upgrade your TC8’s precision and performance with the 1UP Racing Aluminum DirectHex Hub Axles — the ultimate solution for racers who demand accuracy, strength, and zero slop in every corner. About the Aluminum DirectHex Hub AxlesExpertly CNC-machined from high-grade 7075 aluminum, these DirectHex axles feature a true hex interface that completely eliminates the play and inconsistency of clamping-style hubs. The lightweight design reduces rotating mass, while the durable black anodized finish and laser-etched markings give a clean, professional look. Each set includes premium 6x10x3 Cv2 Pro bearings and o-rings for smooth operation and reliable fitment. Features: True hex interface — zero slop, no clamping distortion Precision-machined from 7075-T6 aluminum for strength and low weight Black anodized finish with laser-etched 1UP logo and hex size Includes premium 6x10x3 Cv2 Pro bearings Available in 4 mm, 5 mm, and 6 mm offsets for fine-tuned handling Four o-rings included for secure, consistent installation Race-proven design for the Team Associated TC8 platform Includes: (2) Team Associated TC8 Aluminum DirectHex Hub Axles (5 mm Offset)

Read more less

  🏁 High-Precision Touring Car Wheels for Consistent PerformanceThe Yokomo 12mm Hex Precision Medium Narrow Touring Car Wheels deliver accuracy, balance, and strength — essential for competitive 1/10 scale touring car racing. Designed with Yokomo’s signature precision molding, these wheels provide perfect roundness, optimal stiffness, and a consistent mounting surface for your tires, ensuring smooth and predictable handling on every lap. ⚙️ About the Yokomo Medium Narrow Wheels With a 24mm width and 0mm offset, these wheels are ideal for a wide range of track conditions, offering excellent rigidity while maintaining the flex needed for consistent grip. The durable composite material resists deformation under high cornering loads, helping you maintain consistent traction and speed through the turns. 🌟 Features Precision-molded 24mm wheels for smooth and accurate rotation 0mm offset for standard touring car fitment Medium narrow design ideal for both carpet and asphalt tracks Durable composite construction resists flex and deformation 12mm hex fitment for universal compatibility White finish for a clean, professional look 📦 Includes (4) Yokomo 12mm Hex Medium Narrow Touring Car Wheels (White) 🚗 Compatibility Yokomo BD10 Yokomo BD7 (Original, 2014, 2016) Yokomo BD8 (2017, 2018) Yokomo RS1.0 Fits most 1/10 scale touring cars with 12mm hex hubs ⚡ Trusted by top racers worldwide — Yokomo Precision Touring Car Wheels deliver the stability, balance, and quality your setup deserves.

Read more less

Take your Losi NASCAR® 1/12 on-road performance to the next level with the Pro-Line Fifty6 Pre-Mounted Foam Tires. Engineered for ultimate traction and stability on carpet racing surfaces, these race-proven tires deliver maximum grip, precision handling, and superior consistency lap after lap. ✅ Track-Ready Performance – Designed for maximum grip and cornering stability on carpet✅ Lightweight & Efficient – Reduces rotational mass for faster acceleration and smoother handling✅ Durable Foam Compound – Provides long-lasting consistency and predictable performance✅ Sleek Black Circuit Wheels – Pre-mounted and balanced for immediate race use✅ 8mm Hex Fitment – Ensures precise installation and compatibility with Losi NASCAR platforms Includes: (4) Losi® NASCAR® Fifty6 1/12 Pre-Mounted Foam Tires (Black) Specifications: Scale: 1/12 Diameter: 2.14 in (54.3 mm) Width: 1.05 in (26.6 mm) Hex Size: 8 mm ⚡ Pre-glued, pre-mounted, and precision-tuned — the Pro-Line Fifty6 tires are ready to dominate your next carpet race right out of the box.  

Read more less