1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

JConcepts Mono 2.2" Rear Wheels (4) – White – Fits B7, B74.2, YZ2, YZ4, XB2, XB4, LD3, L1R Overview:The JConcepts Mono 2.2" Rear Wheels are a proven favorite in 1/10 off-road racing, known for their durability, performance, and fitment across a wide range of modern race buggies. These wheels feature a concave dish design, outer glue bead catch, and precision-molded 12mm hex to ensure proper fitment and performance on high-traction tracks. Built with durability and weight savings in mind, the Mono wheel includes tall radial outer ribs, short inner beads, and 10 internal supporting ribs for a balanced combination of strength and low rotating mass. Packaged as a set of 4 wheels, they offer excellent value for racers who go through multiple sets during testing or events. Features: Durable Mono-style design with concave face Includes 4 wheels per pack Outer glue bead catch for clean tire installs Tall outer radial ribs and shorter inner bead ribs for weight savings 10 internal support ribs for stability Two vent holes per wheel Molded in bright white or fluorescent yellow ROAR National & IFMAR World Championship approved Compatibility: ✅ Team Associated B7 / B74.2✅ Yokomo YZ2 / YZ4✅ Xray XB2 / XB4✅ Schumacher LD3 / L1R

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

  Engineered for high-grip carpet and turf tracks, the JConcepts Fuzz Bite LP rear tires bring next-level precision and traction. With a low-profile carcass and reverse "water tower" pin design, these tires offer lightning-quick transitions and maximum grip without sacrificing longevity. Radius-positioned pins and directional lugging create consistent cornering and explosive forward bite. 💥 Open cell inserts included. Features:• Low-profile carcass for reduced sidewall roll• Reverse "water tower" pin shape for precision grip• Radius-positioned pin layout for optimized bite• Lightweight scalloped tire beads reduce rotational mass• Plush open cell inserts included

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

Keep ESC and motor temperatures under control with the 30x30x10mm Aluminum High-Speed HV Cooling Fan from ProTek RC. Designed for high-performance RC applications, this compact fan delivers strong airflow while handling true 2S high-voltage power with confidence. The machined aluminum housing helps dissipate heat more efficiently than plastic fans and adds extra protection to the fan blades in the event of a crash. Dual ball bearings ensure smooth, reliable operation at high RPMs, making this fan a durable choice for racing and bashing alike. Pre-wired with a 2-pin JST connector and including a long adapter lead, installation is simple whether you’re powering it from a receiver or another voltage source. ⚠️ Installation Note:Install the fan at least 5mm away from the motor to allow proper airflow and prevent magnetic interference. Features: 30x30x10mm aluminum high-speed cooling fan Ideal for ESC and motor cooling applications Machined aluminum case improves heat dissipation Dual ball bearings for durability and longevity True 2S HV rated (up to 8.75V) Anodized black finish with silver chamfered edges Compact size fits 1/12, 1/10, and 1/8 scale platforms Includes: (1) 30mm Aluminum HV Cooling Fan Pre-installed 2-pin JST connector (1) 200mm adapter lead for easy power connection

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire is a top-tier pin tire option for carpet and turf racing. Designed for maximum traction and precise handling, this low-profile tire delivers quick transitions, minimal side-wall deflection, and superior cornering stability. The pre-mounted design ensures convenience and consistency, making it a go-to choice for competitive racers. Features: ✔️ Pre-mounted for hassle-free installation✔️ Low-profile carcass for fast transitions and stability✔️ Reverse “water tower” pin shape for maximum grip✔️ Radius-positioned pin arrangement for consistent traction✔️ Directional sidewall lugging for precise cornering control✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Mounted on JCO3353 wheels for durability and performance In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tires (Pink Compound)📦 (2) JCO3353 Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ Standard 12mm Hex Fitment  

Read more less

JConcepts Pin Swag 2.2" Pre-Mounted 4WD Front Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Pin Swag 2.2" Pre-Mounted 4WD Front Buggy Carpet Tires are built for precision control and long-lasting performance on carpet and turf racing surfaces. These tires combine the outer lugs from the Swagger with a dense pin arrangement, creating a versatile and high-traction option for serious racers. Mounted on JCO3353 wheels in white or fluorescent yellow, they offer a hassle-free, race-ready solution right out of the package. Features: ✔️ Pre-mounted on durable JCO3353 wheels (White or Yellow)✔️ Pin and Swag hybrid tread design for versatile traction and control✔️ Low-profile carcass for improved stability and responsiveness✔️ Hefty base pin with crisp ends to maximize bite✔️ Tight pin spacing for even wear and longevity✔️ Scalloped tire beads for reduced rotating mass In The Box: 📦 (2) Pre-Mounted JConcepts Pin Swag 2.2" 4WD Front Buggy Tires (Pink Compound)📦 (2) JCO3353 Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ 12mm Hex✅ Ideal for carpet and turf surfaces

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks – ASC91901🛞 Precision Steering Just Got an Upgrade Fine-tune your front-end handling with the Team Associated -1mm Scrub Caster & Steering Block set for the RC10B6.4 and B6.4D! Whether you're chasing max steering feel or dialing in a tighter line through corners, this kit delivers the flexibility you need. The included caster inserts let you tweak your setup in seconds, giving you full control over how your buggy handles on any track. ✅ Designed specifically for B6.4 and B6.4D✅ Adjustable camber with multiple caster insert options✅ Lightweight and durable AE factory-grade components✅ Great for high-traction tuning or steering sensitivity adjustments 📦 Includes:• (2) Caster Blocks• (4) Steering Blocks• (2) +/- 0° Caster Inserts• (2) +/- 2.5° Caster Inserts• (2) +/- 5° Caster Inserts• (2) Shims 🔢 Part Number: ASC91901🏁 Brand: Team Associated

Read more less

1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts – Ultra-Light, Ultra-Secure! Upgrade your RC wheels with the 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts, our lightest and most vibrant wheel nuts yet! Inspired by the smooth lines of the legendary SoCal Hot Rod scene, these precision-machined aluminum nuts bring a sleek, high-performance look to your ride. Designed with race-proven technology, they feature mirror-like chamfer details, a floating hex for perfect wrench engagement, and an oversized 11mm serrated flange for maximum bite and security. Built from premium 7075 aluminum, these wheel nuts deliver durability, style, and lightweight efficiency—all in one package! Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Maximum bite and wheel security, even in the toughest conditions.✅ Oversized 11mm O.D. Flange – Enhances grip and prevents wheel slippage under extreme loads.✅ Low-Profile, Floating Hex Design – Perfect wrench engagement and streamlined aesthetics.✅ 7mm Outer Hex & M4x0.7mm Threads – Universal fit for a wide range of RC vehicles.✅ Mirror-Like Chamfered Edges – Shines under light for an unmistakable high-end finish.✅ Available in 10 Bold Anodized Colors – Customize your RC with stunning color options. In the Box: (4) 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts Secure. Lightweight. Race-Ready. Don’t let inferior wheel nuts slow you down—lock in your wheels with the best in the game! The 1up Racing 7075 Aluminum Lockdown Wheel Nuts deliver unrivaled performance, security, and style, making them a must-have upgrade for any serious racer or enthusiast. 🔥 Order now and give your ride the 1up it deserves! 🏁💨

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

Lock in your tires with the strongest, fastest-drying RC tire glue on the market. Pro-Line Pro-Bond CA Tire Glue delivers a 3,200 PSI bond strength, giving racers absolute confidence that tires stay glued lap after lap — no lifting, no peeling, no failures. This premium formula dries crystal clear, with zero yellowing or whitening, and uses a revolutionary bottle + tip design that makes application easier, cleaner, and more consistent than any other glue you’ve used. If you mount tires, this is the glue. Features 3,200 PSI holding strength — highest in its class Super-fast curing with crystal-clear finish Custom CA formula delivers maximum rubber bond Ultra-soft round bottle for perfect squeeze control Round design stays stable on the pit table Reusable translucent yellow applicator tips Perfect applicator hole size for tire gluing Cleaner, easier, more consistent than standard CA bottles Includes (1) Pro-Line Pro-Bond Tire Glue (0.7oz / 20g) (2) Reusable Yellow Pro-Bond Applicator Tips

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Avid 7" Precut High-Clearance Wing (Standard or Lightweight) [AV10129-P-S] Product Overview: After months of development, the Avid 7" Precut High-Clearance Wing is engineered for optimal airflow, durability, and adjustability. Designed to fit all 1/10 scale buggies, this wing offers high clearance wheel cutouts and a low-drag profile, making it a top-tier choice for racers aiming to reduce turbulence while maintaining strength. Features: Precut 7” wing with standard thickness for maximum durability High and large radiused wheel cutouts for superior tire clearance 18.5° rear angle for reduced pressure and low drag without sacrificing strength Small centerline mark for easy centering during installation 8 structural ribs to maintain wing shape during crashes Dual gurney flap options to fine-tune rear traction Embossed AVID logo on the center panel Includes: (1) Avid 7" Precut High-Clearance Wing  Part Number: AV10129-P-S (Standard)/AV10129-P-LW (Lightweight)  

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Protect your chassis and keep your B84 looking race-ready. This pre-cut chassis protective sheet is precision designed, offering durable protection against scrapes, wear, and track abuse. Manufactured by Legue Graphics, these chassis protectors deliver a clean, professional look while helping preserve long-term chassis condition. Available in multiple fun color options to match your build or team style. Features Precision cut specifically for each  Durable surface protection against scrapes and wear Includes extra removable tailpiece Clean, professional appearance Easy application after cleaning chassis with alcohol-based cleaner Manufactured by Legue Graphics Helps preserve chassis resale value Designed for competitive RC use  

Read more less

Overview:Add precision, style, and functionality to your wiring setup with the 1UP Racing 5mm Heatsink Bullet Plug Grips. These premium bullet connectors feature anodized aluminum grips that make plugging and unplugging battery leads effortless while improving cooling and providing a secure, professional finish. About the Heatsink Bullet Plug GripsThe 1UP Racing Heatsink Bullet Plug Grips are designed to elevate both performance and convenience. The aluminum grips act as miniature heatsinks, dissipating heat during high-current use while offering a secure, non-slip surface for easy handling. Perfect for racers and builders who want a clean, functional wiring setup that looks as good as it performs. Features: Machined aluminum heatsink grips help dissipate heat and add visual appeal 5mm bullet connectors provide solid, low-resistance electrical contact Easy to plug and unplug — even in tight battery trays Anodized in black and red for instant polarity identification Includes 3mm set screws for reliable wire retention Perfect upgrade for race builds and high-performance applications Includes: (2) 5mm bullet connectors (2) Heatsink plug grips (Black/Red) (2) 3mm set screws

Read more less

Reedy B6/B7 Flat Sensor Wire (175mm) – ASC995Clean up your wiring and keep your electronics sharp with this Reedy Flat Sensor Wire, specially designed for a factory-perfect fit in Team Associated B6 and B7 series buggies. At 175mm, this length is ideal for tight, mid-motor setups where space matters. The flat profile tucks in nicely for a pro-level look and hassle-free routing. ✅ Designed for: RC10B6 / RC10B6.4 RC10B7 / RC10B7D Works with most brushless ESC/motor combos 📏 Length: 175mm🧰 Flat design for sleek wire management🔌 ROAR-compliant sensor connections OEM Part #: ASC96995  

Read more less

Avid 7" High-Clearance Wing Set (Standard) – Uncut (2pcs) [AV10129-S] Product Overview: The Avid 7" High-Clearance / Low Drag Wing is meticulously engineered for 1/10 buggies requiring maximum airflow efficiency and structural integrity. Featuring high clearance wheel cutouts, smooth airflow shaping, and unmatched durability, this wing set is the perfect solution for racers demanding both performance and strength. This version includes two uncut wings in standard thickness, providing flexibility for trimming and custom fitment. Features: Set of two 7” uncut wings Standard thickness for maximum durability and longevity High-clearance wheel arches for improved tire clearance 18.5° low-drag rear angle relieves downforce pressure without compromising strength Small raised centerline mark for quick and precise centering during mounting Eight side support ribs for structural strength during impacts Embossed AVID logo at the center of each wing Includes gurney options to fine-tune rear traction (sold separately) Includes: (2) Avid 7" Uncut High-Clearance Wings (Standard Thickness) Part Number: AV10129-S

Read more less

Nitro Pro FK-N700PRO2 – Gen 2 Monster Torque Servo 💪 When raw power meets precision engineering — the Nitro Pro FK-N700PRO2 is the next evolution in high-performance servos, delivering monstrous torque and ultra-fast response in a rugged, waterproof package. 🔥 Built for the toughest tracks and the most demanding applications, this brushless beast pushes ~708oz of torque at 0.11 transit speed, backed by stainless steel gears and billet aluminum housing. Whether you're launching off jumps, battling harsh terrain, or crawling with finesse — this servo brings unmatched durability and strength. ✨ Key Features: ⚙️ ~708oz @ 0.11 Transit Speed – Command instant response and brute force when it counts🛠️ Upgraded Gear Sets & Electronics – Reinforced internals for smoother, stronger performance🏗️ Billet Aluminum Case – Built to take a beating and stay cool under pressure🧠 Brushless Motor – High efficiency and longer life compared to standard servos💧 IP67 Waterproof – Go all out in mud, rain, or snow — this servo shrugs it off🔩 Stainless Steel Gears (316/304) – Zero-compromise toughness, race after race✅ 100% Satisfaction Guarantee + 12-Month No-Hassle Warranty 📦 What’s in the Box? ✔️ (1) Nitro Pro FK-N700PRO2 Gen 2 Brushless Servo✔️ Peace of mind with a 1-Year Warranty & Support 🔧 Engineered to Dominate – Backed by a Brand You Trust The FK-N700PRO2 isn’t just an upgrade — it’s a statement. Whether you’re bashing or racing, this servo will out-muscle the competition. 💡 Step Up Your Game – Get the Nitro Pro FK-N700PRO2 Today!

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

  Team Associated 5.5x2.0mm Aluminum Ball Stud Washers – Blue (10) – Part 31383Stack Smart. Tune Precisely. Perform Better. The Team Associated 5.5x2.0mm Blue Aluminum Ball Stud Washers (31383) are essential for precise suspension tuning on your 1/10 scale vehicles. With a clean anodized finish and a small outside diameter, these washers are commonly used in on-road applications but work perfectly for off-road as well. ✅ Pack of 10 lightweight aluminum washers✅ 5.5mm outer diameter / 2.0mm thickness✅ Blue anodized finish – clean, race-inspired appearance✅ Perfect for adjusting ball stud height, roll center, and link angles✅ Ideal for both on-road and off-road 1/10 scale platforms 📦 Includes: (10) 5.5x2.0mm Blue Aluminum Ball Stud Washers Part #: 31383 💡 Pro Tip: Mix with other thicknesses to fine-tune geometry without over-adjusting a single point.  

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Factory Team Aluminum Servo Horn – 25T / 18.5mm – Part 1363Stronger Steering. Smoother Control. The Factory Team 25T Aluminum Servo Horn (1363) is a premium upgrade for RC8B3, RC8B3e, RC8T3, and RC8T3e platforms. Machined from 7075 T6 aluminum, this horn is built to handle the demands of competitive racing. Its shorter 18.5mm length offers a smoother steering feel while reducing stress on the servo. ✅ 7075 T6 aluminum construction – lightweight and ultra-strong✅ 18.5mm length – optimized for smoother steering and less servo strain✅ Clamping design with large M2.5 screw – secure fit with reduced slop✅ Laser-etched 25T spline size – easy identification✅ Compatible with XP Digital, Reedy, Futaba, Savox, and newer Hitec servos✅ Perfect fit for RC8B3, B3e, T3, and T3e platforms 📦 Includes: (1) 25T Aluminum Clamping Servo Horn (18.5mm) (1) M2.5 Clamp Screw Part #: 1363 💡 Pro Tip: Shorter servo horns like this one help protect your servo during high-impact landings and tight cornering.

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

JConcepts Mono 2.2" 4WD Front Buggy Wheels (4) – 12mm Hex – White or Yellow Overview:These JConcepts Mono 2.2" 4WD Front Buggy Wheels are engineered for precision fitment and performance, making them a top-tier choice for racers running the TLR 22X-4, Team Associated B74.1/B74.1D, or XRAY XB4 platforms. Designed with ROAR-legal dimensions, they feature a slight convex dish design, outer glue catch, and vent holes for smoother tire installation and consistent performance. Manufactured with advanced molding techniques and durable materials, these wheels offer a perfect balance of strength, weight, and style, while the signature JC logo ensures authenticity and quality. Features: Popular Mono-style dish design 4 wheels included per pack Available in bright white or fluorescent yellow Outer glue catch to prevent glue overflow Built-in vent holes for optimal tire mounting Durable material and advanced manufacturing process Direct fit for popular 4WD buggy platforms Compatibility: ✅ TLR 22X-4✅ Team Associated RC10 B74.1 / B74.1D✅ XRAY XB4 2021 Carpet / Dirt Editions

Read more less

This is a replacement G3 Shock End Set for Team Losi Racing vehicles equipped with G3 shocks. Designed for durability and smooth suspension operation, this set includes four high-quality shock ends compatible with a variety of TLR models. ✅ Includes:• (4) G3 Shock Ends Perfect for routine maintenance or as a direct replacement to keep your suspension performing at its best.

Read more less

Team Associated Factory Team Carbon Front Gullwing Arms – RC10B74.2 Increased Response for High-Traction Tracks Upgrade your RC10B74.2 or B74.2D with these Factory Team Carbon Front Gullwing Suspension Arms, designed for racers who demand sharper handling on high-grip or smooth surfaces. The carbon material increases stiffness, delivering enhanced steering response and cornering precision. 🔩 Features: 🏁 Carbon construction for added rigidity 🎯 Designed for smoother surfaces and high-traction conditions 🔧 Direct replacement for stock gullwing arms 🧩 Includes suspension arm spacers for proper fit 📦 Includes: (1) Left Front Carbon Gullwing Arm (1) Right Front Carbon Gullwing Arm (2) Suspension Arm Spacers ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🏆 Dial in your front-end for faster response and refined control where it matters most.

Read more less

  The Team Associated Factory Team 5x10x4mm Bearings are high-quality replacement bearings designed to restore smooth operation and reduce drag in critical areas of your vehicle. Built for performance and reliability, these bearings help eliminate play caused by worn components while improving overall drivetrain and suspension efficiency. Distinguished by a blue shield on one side and a metal shield on the other, these Factory Team bearings provide smooth rotation and dependable performance for racing or regular maintenance. Features Genuine Team Associated Factory Team bearings 5x10x4mm size Reduces drag for improved efficiency Helps eliminate play in worn areas Blue shield on one side, metal shield on the other Ideal for maintenance or performance rebuilds Includes (4) 5x10x4mm Bearings A reliable upgrade or replacement choice to keep your vehicle running smooth and race-ready. 🏁  

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less