JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are engineered for carpet and turf racing, offering exceptional traction, stability, and durability. Designed with radius-positioned pins and a low-profile carcass, these tires provide quick transitions, minimal side-wall deflection, and maximum grip on high-traction surfaces. Pre-mounted on JCO3348 Mono wheels and featuring plush open-cell inserts, they are race-ready straight out of the package. Features: ✔️ Pre-mounted for quick and hassle-free installation✔️ Low-profile carcass for reduced side-wall flex and quicker response✔️ Reverse “water tower” pin shape for enhanced grip and control✔️ Radius-positioned pin arrangement for maximum surface contact✔️ Directional sidewall lugging for precise cornering and acceleration✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Plush open-cell inserts included for added control and stability✔️ Mounted on JCO3348 Mono wheels in white or fluorescent yellow In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Tires (Pink Compound)📦 (2) JCO3348 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" Rear Buggy Wheels✅ Standard 12mm Hex Fitment

Read more less

  JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (White OR Yellow) (2) (Pink) (Carpet) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires are engineered for carpet and turf racing, delivering precision steering, exceptional grip, and quick responsiveness. Built on a super low-profile carcass, these tires reduce side-wall deflection and roll for maximum consistency at high speeds. Mounted on JCO3376 Mono wheels (white or fluorescent yellow), and assembled without inserts, they’re ready to hit the track right out of the package. Features: ✔️ Pre-mounted for quick and consistent installation✔️ Super low-profile carcass for stability and quick transitions✔️ Reverse “water tower” pin design for precise and deep carpet traction✔️ Radius-positioned pin layout for consistent grip and wear✔️ Alternating pin rows for increased steering and side-bite✔️ Directional sidewall lugging for added mid-corner grip✔️ Scalloped tire beads reduce unsprung weight✔️ Mounted on JCO3376 Mono wheels (White or Yellow) In The Box: 📦 (2) Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (Pink Compound)📦 (2) JCO3376 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 2WD Front Buggy Wheels✅ 12mm Hex

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

JConcepts Mono 2.2" Rear Wheels (4) – White – Fits B7, B74.2, YZ2, YZ4, XB2, XB4, LD3, L1R Overview:The JConcepts Mono 2.2" Rear Wheels are a proven favorite in 1/10 off-road racing, known for their durability, performance, and fitment across a wide range of modern race buggies. These wheels feature a concave dish design, outer glue bead catch, and precision-molded 12mm hex to ensure proper fitment and performance on high-traction tracks. Built with durability and weight savings in mind, the Mono wheel includes tall radial outer ribs, short inner beads, and 10 internal supporting ribs for a balanced combination of strength and low rotating mass. Packaged as a set of 4 wheels, they offer excellent value for racers who go through multiple sets during testing or events. Features: Durable Mono-style design with concave face Includes 4 wheels per pack Outer glue bead catch for clean tire installs Tall outer radial ribs and shorter inner bead ribs for weight savings 10 internal support ribs for stability Two vent holes per wheel Molded in bright white or fluorescent yellow ROAR National & IFMAR World Championship approved Compatibility: ✅ Team Associated B7 / B74.2✅ Yokomo YZ2 / YZ4✅ Xray XB2 / XB4✅ Schumacher LD3 / L1R

Read more less

JConcepts Mono 2.2" "Slim" Front Wheels (Yellow, 4pcs) – 12mm Hex Overview:The JConcepts Mono 2.2" Slim Front Wheels are precision-designed for narrow front tires commonly used in carpet and Astroturf racing. Molded from durable high-impact material, these lightweight wheels offer a clean dish-style design with functional features that racers demand. The shallow 12mm hex design ensures quick, clean installs across a wide variety of 2WD buggy platforms. Whether you're mounting up on a Team Associated B6, Yokomo YZ-2, or Kyosho RB6, these wheels offer an ideal fit for tight indoor racing conditions. Each pack includes four wheels, available in fluorescent yellow for high visibility and style. Features: Slim width for narrow tire applications (carpet/Astro) Lightweight, one-piece construction Popular dish styling with vent holes Outer glue catch for cleaner tire mounting Polished face with embossed JC logo Pack of 4 wheels Available in bright white or fluorescent yellow Compatibility Includes (but not limited to): ✅ Team Associated: B7, B7D, B6, B6.1, B6.1D, B6.2, B6.2D, B5, B5M, B4 series✅ Kyosho: RB5, RB6, RB7✅ Schumacher: Cougar KF2, KF2 SE, KD, KC, LD3✅ Yokomo: YZ-2 CAL, CAL2, CAL3, DTM, DTM WC, DTM2, DTM3✅ Serpent: SRX-2 MM, RM✅ XRAY: XB2 (2017–2019 Carpet/Dirt editions)

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Team Associated RC10B6 Factory Team Carbon Front Suspension "Gullwing" Arms [91872] 🦅 Fly through corners with precision! Upgrade your front end with Factory Team Carbon Gullwing Arms for your RC10B6! Designed with carbon fiber construction, these arms are lighter, stiffer, and stronger—giving you the edge when the track gets tough and traction is high. ✅ 12% lighter than "hard" material✅ Better cornering in high-grip conditions✅ More consistent handling and stability✅ Extreme strength and durability Includes:(2) Carbon Front Suspension Gullwing Arms 📦 Part Number: 91872🏁 Brand: Team Associated

Read more less

JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tires (2) (Pink) 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" 2WD Front Buggy Tires are high-performance pin tires built for carpet and turf racing. With a low-profile carcass, precision pin design, and optimized radius layout, these tires deliver fast transitions, increased side-bite, and excellent forward traction on high-grip surfaces. Features: ✔️ Low-profile carcass for reduced roll and quicker steering response✔️ Reverse “water tower” pin design for enhanced grip and precision✔️ Radius-positioned pin layout for maximum surface contact✔️ Alternating pin rows for optimal side-bite and traction✔️ Radial rib & angular cross tread for consistent cornering and mid-corner launch✔️ Ultra-lightweight scalloped tire beads for reduced rotating mass In The Box: 📦 (2) Fuzz Bite LP 2.2" 2WD Front Buggy Tires (Pink Compound) Compatibility: ✅ Fits 2.2" 2WD Front Buggy Wheels

Read more less

JConcepts Pin Swag 2WD Front – Pink Compound – Pre-Mounted on 3376 Wheels (White or Yellow)Precision Steering Meets Turf Domination! 💥 The JConcepts Pin Swag Front Tires bring aggressive traction and pinpoint control to 2WD buggies on high-grip carpet and turf. Pre-mounted on 3376 wheels and glued for out-of-the-box performance, these tires combine the proven Swagger outer lug design with a dense pin layout for unmatched front-end steering. ✨ Key Features: ✅ Pre-Mounted for Convenience – Glued and ready to race! 🔧 Pink Compound – Soft, high-traction rubber optimized for carpet & turf 🛞 Pin x Swag Hybrid Tread – Swagger-style outer lugs + crisp center pins for bite and balance 💡 Ultra-Light Scalloped Bead Design – Reduces rotating mass for faster response 🌀 Low-Profile Carcass – Faster cornering, better transition through chicanes and jumps 🎨 Available in Bright White or Fluorescent Yellow wheels 🧩 Compatibility: Fits 2WD front buggies using JConcepts 3376 wheels 📦 Includes: (2) Pre-mounted JConcepts Pin Swag Front Tires – Pink Compound (2) JConcepts 3376 Wheels (choose white or yellow) ⚠️ Note: Sold as a pair. Please verify fitment with your buggy’s wheel requirements. 🏁 Take control of the corners and push the pace with the aggressive precision of JConcepts Pin Swags!

Read more less

  Engineered for high-grip carpet and turf tracks, the JConcepts Fuzz Bite LP rear tires bring next-level precision and traction. With a low-profile carcass and reverse "water tower" pin design, these tires offer lightning-quick transitions and maximum grip without sacrificing longevity. Radius-positioned pins and directional lugging create consistent cornering and explosive forward bite. 💥 Open cell inserts included. Features:• Low-profile carcass for reduced sidewall roll• Reverse "water tower" pin shape for precision grip• Radius-positioned pin layout for optimized bite• Lightweight scalloped tire beads reduce rotational mass• Plush open cell inserts included

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts – Ultra-Light, Ultra-Secure! Upgrade your RC wheels with the 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts, our lightest and most vibrant wheel nuts yet! Inspired by the smooth lines of the legendary SoCal Hot Rod scene, these precision-machined aluminum nuts bring a sleek, high-performance look to your ride. Designed with race-proven technology, they feature mirror-like chamfer details, a floating hex for perfect wrench engagement, and an oversized 11mm serrated flange for maximum bite and security. Built from premium 7075 aluminum, these wheel nuts deliver durability, style, and lightweight efficiency—all in one package! Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Maximum bite and wheel security, even in the toughest conditions.✅ Oversized 11mm O.D. Flange – Enhances grip and prevents wheel slippage under extreme loads.✅ Low-Profile, Floating Hex Design – Perfect wrench engagement and streamlined aesthetics.✅ 7mm Outer Hex & M4x0.7mm Threads – Universal fit for a wide range of RC vehicles.✅ Mirror-Like Chamfered Edges – Shines under light for an unmistakable high-end finish.✅ Available in 10 Bold Anodized Colors – Customize your RC with stunning color options. In the Box: (4) 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts Secure. Lightweight. Race-Ready. Don’t let inferior wheel nuts slow you down—lock in your wheels with the best in the game! The 1up Racing 7075 Aluminum Lockdown Wheel Nuts deliver unrivaled performance, security, and style, making them a must-have upgrade for any serious racer or enthusiast. 🔥 Order now and give your ride the 1up it deserves! 🏁💨

Read more less

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

Unleash race-winning control and consistency with the JConcepts 3DP 2.2" Pre-Mounted Carpet Tires — engineered for elite racers demanding precision and long-lasting performance on high-grip carpet tracks. Designed and tested in the USA, the 3DP tire represents the latest generation of JConcepts’ carpet racing technology, building on the success of the Fuzz Bite and 3D series. The super-stacked pin layout with reverse “water tower” pins delivers incredible forward bite and consistent wear, while the low-profile carcass keeps steering crisp and the buggy planted through corners. Mounted on lightweight JConcepts Mono wheels, these tires are pre-glued, balanced, and ready for immediate track use — a must-have upgrade for serious racers looking to dominate on EOS-style and CRC carpet surfaces. ⚙️ Features: Pre-mounted on JConcepts Mono 12mm hex wheels (White or Yellow options) Low-profile carcass ensures stable cornering and direct steering response Super-stacked pin layout provides maximum traction and controlled wear Reverse “water tower” pin design enhances forward grip and durability Cut & sliced outer bars improve flexibility and edge control in tight sections Open outer pin spacing helps clear debris while maintaining traction Radial ribs along the sidewall deliver smooth, predictable handling Scalloped tire beads reduce rotating mass for quicker acceleration Pink compound tuned specifically for high-traction carpet performance 📏 Specifications: Part Numbers: 4174-101011 (White) / 4174-201011 (Yellow) Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet) Wheel Diameter: 2.2" Wheel Hex: 12mm Surface: Carpet / Turf Quantity: 2 Pre-Mounted Tires 📦 Includes: (2) JConcepts 3DP 2.2" 2WD Front Buggy Carpet Pre-Mounted Tires Mounted on (2) JConcepts Mono 12mm Hex Wheels (White or Yellow)  

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 12mm Big Bore V2 Machined Shock Spacers – Part 91494Precision Fit. Smooth Travel. Race-Ready Performance. The Team Associated 12mm Big Bore V2 Machined Shock Spacers (91494) are direct replacements for the RC10 B6 and B6D buggies. These machined components ensure precise shock shaft alignment and optimal sealing, helping your suspension perform consistently under race conditions. ✅ Fits RC10 B6, B6D, and other 12mm Big Bore V2 shocks✅ Machined for accuracy and long-lasting durability✅ Includes shock shaft guides and seal cartridge spacers✅ Supports four full shocks✅ Essential for maintaining smooth and consistent shock performance 📦 Includes: Complete Set of Shock Shaft Guides Seal Cartridge Spacers (for 4 shocks) Part #: 91494 💡 Pro Tip: Replacing shock spacers and guides during a rebuild helps eliminate leaks and restores full suspension responsiveness.

Read more less

Avid 7" Precut High-Clearance Wing (Standard or Lightweight) [AV10129-P-S] Product Overview: After months of development, the Avid 7" Precut High-Clearance Wing is engineered for optimal airflow, durability, and adjustability. Designed to fit all 1/10 scale buggies, this wing offers high clearance wheel cutouts and a low-drag profile, making it a top-tier choice for racers aiming to reduce turbulence while maintaining strength. Features: Precut 7” wing with standard thickness for maximum durability High and large radiused wheel cutouts for superior tire clearance 18.5° rear angle for reduced pressure and low drag without sacrificing strength Small centerline mark for easy centering during installation 8 structural ribs to maintain wing shape during crashes Dual gurney flap options to fine-tune rear traction Embossed AVID logo on the center panel Includes: (1) Avid 7" Precut High-Clearance Wing  Part Number: AV10129-P-S (Standard)/AV10129-P-LW (Lightweight)  

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

Dial in your carpet setup with JConcepts Swaggers 2.2" Front Buggy Tires. These tires feature a low-profile carcass and angular ribs in multiple heights for maximum corner speed, razor-sharp tracking, and consistency on high-grip carpet or astro tracks. Designed for slim 2WD front wheels (JCO3376W or JCO3376Y), the Swagger’s pink medium-soft compound offers excellent wear while staying fast and easy to drive. 🏁 No insert required. Features:• Precision fit and finish from JConcepts• Offset angular rib design for enhanced cornering• Low-profile carcass for sharp response• Pink compound optimized for carpet and astro• No insert required

Read more less

Lock in your tires with the strongest, fastest-drying RC tire glue on the market. Pro-Line Pro-Bond CA Tire Glue delivers a 3,200 PSI bond strength, giving racers absolute confidence that tires stay glued lap after lap — no lifting, no peeling, no failures. This premium formula dries crystal clear, with zero yellowing or whitening, and uses a revolutionary bottle + tip design that makes application easier, cleaner, and more consistent than any other glue you’ve used. If you mount tires, this is the glue. Features 3,200 PSI holding strength — highest in its class Super-fast curing with crystal-clear finish Custom CA formula delivers maximum rubber bond Ultra-soft round bottle for perfect squeeze control Round design stays stable on the pit table Reusable translucent yellow applicator tips Perfect applicator hole size for tire gluing Cleaner, easier, more consistent than standard CA bottles Includes (1) Pro-Line Pro-Bond Tire Glue (0.7oz / 20g) (2) Reusable Yellow Pro-Bond Applicator Tips

Read more less

This is a replacement G3 Shock End Set for Team Losi Racing vehicles equipped with G3 shocks. Designed for durability and smooth suspension operation, this set includes four high-quality shock ends compatible with a variety of TLR models. ✅ Includes:• (4) G3 Shock Ends Perfect for routine maintenance or as a direct replacement to keep your suspension performing at its best.

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Team Associated RC10B7 1/10 2WD Off-Road Buggy Kit – Next-Generation Championship Performance! Celebrating 40 years of championship-winning innovation, the Team Associated RC10B7 is the next evolution in 1/10 2WD electric buggy racing. Featuring a new long-arm suspension geometry, centralized electronics layout, KPI adjustable steering blocks, and an advanced high-grip setup, this buggy delivers faster lap times, increased corner speed, and an easier-to-drive feel than ever before. Designed for carpet, AstroTurf®, and high-grip sealed clay tracks, the RC10B7 is engineered for peak performance and tunability, making it the ultimate choice for racers looking to dominate the competition. Key Features: ✅ 5-Gear Laydown Transmission – Low-profile motor mount shifts weight closer to the center for optimal balance.✅ Long-Arm Suspension Geometry – Improves grip and predictability in all conditions.✅ KPI Adjustable Steering & Caster Blocks – Includes three tuning options for precise steering feel.✅ Vertical Front Outer Ballstud – Allows fine adjustments to roll center, camber gain, and link length.✅ Height-Adjustable Aluminum Front Bulkhead – Further tuning of front roll center for enhanced stability.✅ Standard & HRC (High Roll Center) Rear Hubs – Maximizes control on high-grip surfaces.✅ Easy Access Front & Rear Anti-Roll Bars – Quick tuning for optimized weight transfer.✅ High-Volume Gear Differential – Delivers consistent performance over long runs, fits LTC gears from the RC10B74.2.✅ Adjustable Battery Holder with Thumb Tabs – Fine-tune weight bias while allowing easy battery removal.✅ 7075-T6 Aluminum Chassis – Increased departure angle & optional weight plate pockets for precision handling.✅ 6.5mm Aluminum Front Axle – Enhances stability and grip with slim front wheels and low-profile tires.✅ HD 69mm CVA Bones & Differential Outdrives – Improved durability for intense competition.✅ Lightweight Molded Servo Mount – Reduces weight while ensuring precision.✅ One-Piece Rear Wing Mount – Boosts durability during aggressive racing.✅ New 7-Inch Rear Wing & 2.5-Inch Front Wing – Enhances downforce and stability.✅ Low-Profile Body – Aerodynamic design optimized for high-speed handling.✅ Shock Tower Covers (Front & Rear) – Protects suspension components and extends longevity.✅ 3.5mm Turnbuckles & Ballcups – Provides rigidity and durability for precise handling. Precision Engineering for Maximum Performance 🛠 Advanced Suspension & Handling: Long-arm geometry delivers enhanced grip and predictability, improving cornering speed and lap times. Multiple steering and roll center tuning options allow racers to fine-tune their setups for maximum control. Updated suspension hubs, caster blocks, and ballstud placement provide unparalleled adjustability. ⚙️ Next-Generation Drivetrain & Power Delivery: New 5-gear laydown transmission moves the motor’s weight closer to the center, improving stability and weight distribution. High-volume gear differential enhances long-term consistency for extended runs. Easy access anti-roll bars allow for quick adjustments based on track conditions. 🚀 Factory-Optimized for High-Grip Surfaces: New low-profile body design reduces drag and improves aerodynamic efficiency. 7-inch rear wing & 2.5-inch front wing increase downforce for improved traction and control. 7075-T6 aluminum chassis ensures strength, rigidity, and precise handling characteristics. In the Box: (1) Team Associated RC10B7 1/10 2WD Buggy Kit (1) Clear Low-Profile Body & Wings (1) Manual Needed to Complete: Electronic Speed Control (ESC) 1/10 Scale Electric Motor Steering Servo 2-Channel Transmitter & Receiver System 7.4V-7.6V 2S LiPo Battery Compatible Battery Charger 1/10 Scale Off-Road Buggy Wheels & Tires Lexan-Spray Paint for Body Assembly Tools (Body Scissors, Reamer, Hobby Knife, Pliers, Wire Cutters, Soldering Iron, Calipers) Specifications: Scale: 1/10 Drive: 2WD Chassis: 7075-T6 Aluminum Wheelbase: Adjustable Weight: Varies with electronics Internal Gear Ratio: TBD Power Source: Electric Input Voltage: 7.4V-7.6V (2S LiPo) Assembly Level: Kit 🚨 Note: This is an unassembled RC kit requiring assembly, electronics, and other racer-provided components. Photos of the assembled kit are for illustrative purposes only. 40 Years of Champions – The Ultimate Racing Evolution! 🏆 Team Associated has led the 1/10 2WD racing scene for over four decades, and the RC10B7 continues that legacy. With enhanced grip, superior tunability, and race-ready durability, this buggy is designed to push the limits of competitive racing. 🔥 Get your RC10B7 today and experience next-generation championship performance! 🏁💨

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

Refined torque. Tuned traction. Proven performance.The Team Associated RC10B7 3-Gear Gearbox Conversion Kit delivers a race-focused drivetrain upgrade that lets you fine-tune your buggy’s handling and power delivery. Designed for the RC10B7 and RC10B7D, and also compatible with T7 and SC7 platforms, this 3-gear layout alters torque transfer for a smoother, more balanced launch and enhanced rear-end stability. Perfect for racers chasing the edge on high-traction surfaces or looking to dial in rotation on tight tracks, the 3-gear conversion gives you the flexibility to tailor your drivetrain to your driving style. ⚙️ Features Performance-oriented 3-gear gearbox design Optimized torque response for improved traction and balance Includes notched differential height inserts for precise tuning Durable 54T idler gear with hardened idler shaft Factory-fit bearings and hardware for smooth installation CNC-machined aluminum arm mount (C) included Comprehensive kit with all mounting hardware and manual Designed for consistent durability and easy maintenance 📦 Includes (2) 3-Gear Gearbox Halves (4) Notched Differential Height Inserts (1) 54T Idler Gear (1) Idler Shaft (2) 10×15×4 mm Bearings (1) Aluminum Arm Mount (C) Full Hardware Set 3-Gear Conversion Manual ✅ Compatibility Team Associated RC10B7 / RC10B7D Team Associated T7 / SC7  

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Team Associated RC10B7 Factory Team Carbon Front Suspension Arms (2) – Lightweight & Tuned for Performance! 🏁 Upgrade your RC10B7 with Factory Team Carbon Front Suspension Arms – precision-crafted from Team Associated’s legendary carbon composite material. These arms reduce weight, improve stiffness, and eliminate unwanted flex, making them ideal for high-traction surfaces where consistency and response are key. 🔧 Key Features: ✅ Made from AE’s carbon composite for maximum strength and minimal weight✅ Reduces flex for more consistent handling on high-bite tracks✅ Lightweight design improves agility and acceleration✅ Includes front arm spacers for easy installation and tuning✅ Factory Team performance and durability 📦 Includes: (2) Carbon Front Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 For racers chasing podium performance, carbon arms deliver unmatched precision.Dial in your front-end with Factory Team Carbon Suspension Arms! 🔧🏆

Read more less