Team Associated 13mm Rear Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Upgrade your shocks with Team Associated's high-quality black aluminum 13mm shock caps. Designed for strength, consistency, and race-ready reliability, these caps provide enhanced durability over the stock plastic units while offering a sleek, factory look. ✅ Key Features Precision-machined aluminum construction for increased durability Anodized black for a factory team finish Lightweight design helps reduce unsprung mass Direct fit for Team Associated vehicles using 13mm shocks 🔧 Compatibility Fits the following Team Associated vehicles equipped with 13mm shocks: RC10B6.4 / RC10B6.4D RC10B6.3 / RC10B6.3D RC10B74.2 / RC10B74.2D RC10T6.4 RC10SC6.4(And any other models that use the 13mm V2 shock platform) 📦 Includes • • (2) Aluminum 13mm Shock Caps(Note: Shock bladders and O-rings sold separately)

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Dial in your carpet setup with JConcepts Swaggers 2.2" Front Buggy Tires. These tires feature a low-profile carcass and angular ribs in multiple heights for maximum corner speed, razor-sharp tracking, and consistency on high-grip carpet or astro tracks. Designed for slim 2WD front wheels (JCO3376W or JCO3376Y), the Swagger’s pink medium-soft compound offers excellent wear while staying fast and easy to drive. 🏁 No insert required. Features:• Precision fit and finish from JConcepts• Offset angular rib design for enhanced cornering• Low-profile carcass for sharp response• Pink compound optimized for carpet and astro• No insert required

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

This is a replacement G3 Shock End Set for Team Losi Racing vehicles equipped with G3 shocks. Designed for durability and smooth suspension operation, this set includes four high-quality shock ends compatible with a variety of TLR models. ✅ Includes:• (4) G3 Shock Ends Perfect for routine maintenance or as a direct replacement to keep your suspension performing at its best.

Read more less

  The Team Associated Factory Team 5x10x4mm Bearings are high-quality replacement bearings designed to restore smooth operation and reduce drag in critical areas of your vehicle. Built for performance and reliability, these bearings help eliminate play caused by worn components while improving overall drivetrain and suspension efficiency. Distinguished by a blue shield on one side and a metal shield on the other, these Factory Team bearings provide smooth rotation and dependable performance for racing or regular maintenance. Features Genuine Team Associated Factory Team bearings 5x10x4mm size Reduces drag for improved efficiency Helps eliminate play in worn areas Blue shield on one side, metal shield on the other Ideal for maintenance or performance rebuilds Includes (4) 5x10x4mm Bearings A reliable upgrade or replacement choice to keep your vehicle running smooth and race-ready. 🏁  

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Team Associated RC10B7 Factory Team Carbon Front Suspension Arms (2) – Lightweight & Tuned for Performance! 🏁 Upgrade your RC10B7 with Factory Team Carbon Front Suspension Arms – precision-crafted from Team Associated’s legendary carbon composite material. These arms reduce weight, improve stiffness, and eliminate unwanted flex, making them ideal for high-traction surfaces where consistency and response are key. 🔧 Key Features: ✅ Made from AE’s carbon composite for maximum strength and minimal weight✅ Reduces flex for more consistent handling on high-bite tracks✅ Lightweight design improves agility and acceleration✅ Includes front arm spacers for easy installation and tuning✅ Factory Team performance and durability 📦 Includes: (2) Carbon Front Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 For racers chasing podium performance, carbon arms deliver unmatched precision.Dial in your front-end with Factory Team Carbon Suspension Arms! 🔧🏆

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Reedy Flat Sensor Wire (150mm) – ASC980Keep your electronics tidy and your setup dialed with this Reedy Flat Sensor Wire. Originally included with Reedy Sonic motors, these high-quality flat wires are now available separately to fit your custom build needs. The flat design not only looks sleek but also makes routing easier and cleaner in tight spaces. Ideal for both 1/10 and 1/8 scale applications. 📏 Length: 150mm💡 Available in sizes from 70mm to 270mm ✅ Perfect for: Cleaner wiring layout Reedy Sonic motors and other ROAR-approved ESC/motor combos OEM Part #: ASC96980

Read more less

  Take your carpet and turf racing to the next level with the JConcepts Pin Swag 2.2" 2WD Slim Front Tires, engineered for razor-sharp steering and consistent forward bite. These innovative tires combine the proven outer lugs of the Swagger with a dense array of precision pins to deliver unmatched control, stability, and wear balance on today’s high-traction tracks. The unique “Pin + Swag” hybrid tread pattern features a split-center design for flexible surface adaptation and a staggered section that transitions power smoothly through corners. With a low-profile carcass for responsive handling and scalloped tire beads to cut weight, these front tires are the go-to choice for serious 1/10 racers seeking precision steering on high-grip carpet or turf. ⚙️ Features: JConcepts original Pin + Swag hybrid tread design for optimal front-end grip and balance Low-profile carcass layout improves stability and cornering precision Split-center pattern enhances surface conformity and steering smoothness Hefty base pins with sharp edges maximize bite and minimize wear Dense tread layout for even contact and consistent performance Ultra-light scalloped tire beads reduce rotating mass Ideal for EOS-style carpet and astro/turf tracks Pink compound optimized for high-traction racing 📏 Specifications: Part Number: 3181-010 Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet/Turf) Wheel Diameter: 2.2" Quantity: 2 Tires 📦 Includes: (2) JConcepts Pin Swag 2.2" 2WD Slim Front Tires  

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

Give your 1/10 off-road buggy maximum rotation, rear tire clearance, and pro-level stability with the JConcepts 7" High Clearance Pre-Cut Wing. Designed for carpet, turf, and dirt setups, this wing arrives pre-trimmed and ready to mount—no scissors, no hassle. Engineered with optimized rake, height, and side-dam shaping, the 0504 wing helps your buggy stay planted on power while freeing up rotation in tight corners. Its universal fit works with most 1/10 2WD and 4WD buggies, making it a must-have tuning item for modern high-grip and high-speed tracks. ⭐ Features Pre-cut design — mount it right out of the package 7" wide High Clearance profile for improved rotation and tire room Short-chord design for quicker steering response Flat-base layout for maximum rear tire expansion clearance Chopped rear corners reduce breakage and increase durability Dual stability fangs for added rigidity and consistent aero feel High rear angle provides excellent high-speed stability ROAR National Champion–proven design Works on most modern 1/10 buggies (2WD & 4WD)

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

JConcepts Swaggers 2WD Front 2.2" Carpet Tires (Pink) – Pre-Mounted on 3376 Wheels (12mm Hex)Track-Tuned Precision for High-Grip Carpet Racing! 💥 The JConcepts Swaggers are the go-to front tires for elite-level carpet and astro racing. Featuring offset angular ribs and a low-profile design, these pre-mounted tires are engineered for high-speed consistency, sharp cornering, and superior straight-line tracking. Factory-glued to slim 3376 wheels, these are ready to race right out of the package. ✨ Key Features: ✅ Pre-Mounted on JCO3376 Wheels – Plug and play with no gluing hassle! 🔧 12mm Hex Slim-Profile Front Wheels – Choose white or yellow options (JCO3376W or JCO3376Y) 🌀 Low-Profile Carcass – Enhances stability and control on high-traction tracks 🛞 Angular Rib Design – Offers superior corner speed and straight-line accuracy 🟣 Pink Compound – Medium-soft compound with great balance of grip and longevity 🧩 No Insert Required – Lightweight and ready to dominate on carpet or turf 📦 Includes: (2) Pre-mounted JConcepts Swaggers 2.2" Front Buggy Tires – Pink Compound (2) JConcepts Slim Front Wheels (White or Yellow, 12mm Hex) 🧩 Compatibility: Fits most 2WD 1/10 scale buggies with 12mm front hex and slim wheels 🏁 Turn tighter. Track straighter. Drive faster. Dominate carpet with JConcepts Swaggers!

Read more less

  Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears

Read more less

Maintain smooth, efficient power transfer with the Team Associated RC10B6.2 69mm CVA Bones. Built from high-quality materials, these precision-machined components are designed to withstand the rigors of competitive racing while ensuring consistent drivetrain performance. Features: 69mm length for proper fitment and geometry Precision-machined for smooth, efficient power delivery Durable construction for long-lasting performance Direct replacement for worn or damaged CVA bones Includes: (2) 69mm CVA Bones Compatibility: Team Associated RC10B6.2 Perfect for keeping your buggy’s drivetrain strong, smooth, and race-ready.

Read more less

🏆 Flysky Noble NB4+ AFHDS3 8-Channel 2.4GHz Radio System w/ FGr4B Receiver The FlySky Noble NB4+ is a world-class, 8-channel transmitter system built for elite RC racers and hobbyists. With its advanced AFHDS3 protocol, ultra-low latency performance, and striking full-color touchscreen interface, this radio sets a new benchmark in comfort, style, and control precision. 🧠 Smart Features: 3.5” full-color IPS touchscreen with 320x480 resolution Updated customizable UI with themes and wallpapers Adjustable & detachable steering wheel for left or right-handed use 8 fully customizable channels for complex setups USB-C port with coach mode and head-tracking support Telemetry-ready: monitor real-time voltage, temp, signal strength Ergonomic grip for comfortable long sessions 🔋 Battery & Connectivity: 3450mAh high-capacity battery (18650 cell, included) Quick-release battery system for fast swaps Includes FGr4B 4-channel AFHDS3 receiver with failsafe function 2.4GHz operation with >300m range 📦 Includes: (1) FlySky Noble NB4+ 8-Channel Transmitter (1) FGr4B AFHDS3 Receiver (1) 3450mAh 18650 Battery Product Manual 🔧 Needed to Complete: Nothing! Ready to use out of the box.

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.

Read more less

Dominate the carpet with JConcepts' Fuzz Bite Wide front tires—built for precision, steering response, and longevity. The wide-body, low-profile design delivers quick transitions and reduced roll, while the reverse “water tower” pin layout grips tight in high-traction conditions. Engineered for elite-level performance on tight-knit turf or CRC-style carpeting. Features:• Low-profile, wide-body carcass for improved stability• Reverse “water tower” pins for precision grip• Radius-positioned pins deliver consistent traction• Directional sidewall lugs for steering response• Lightweight scalloped tire beads reduce unsprung weight• Includes two scalloped foam inserts  

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

Team Associated Arm Mount Inserts – ASC92014🔧 Fine-Tune Your Geometry with Precision Inserts Dial in your suspension setup with these official Team Associated Arm Mount Inserts. Designed as direct replacements for the RC10 B6 and B6D platforms, this set gives you a range of tuning options to adjust toe and anti-squat settings—so you can hit your marks on any track. ✅ Factory fit for B6 & B6D vehicles✅ Adjust toe and squat for maximum cornering control✅ Durable and lightweight composite construction 📦 Includes:• (4) Inserts – 0, 0• (4) Inserts – 0, 0.35• (4) Inserts – 0, 0.7• (4) Inserts – 0.35, 0.35 🔢 Part Number: ASC92014🏁 Brand: Team Associated

Read more less

Team Losi Racing 22 5.0 Aluminum Clamping Servo Horn (Black) (25T)PART: TLR331033 Upgrade your steering precision with the Team Losi Racing 25T Aluminum Clamping Servo Horn, designed specifically for the 22 5.0 Electric Buggy Kits. This optional servo horn is CNC-machined from lightweight aluminum for strength and reliability under high stress. Finished in black anodizing with chamfered edges, it adds a touch of style while delivering top-tier performance. The clamping design ensures a secure, tight fit to your servo. Features: Precision-machined from lightweight aluminum Durable black anodized finish with chamfered accents Clamping style for secure fitment Compatible with 25T spline servos Designed for 22 5.0 Electric Buggy Kits

Read more less

The Sticky Kicks RC Five Star Bearing Oil is a premium, race-proven lubricant formulated specifically for high-speed ceramic and stainless steel RC racing bearings. Designed for serious racers, this oil helps keep bearings running smooth, efficient, and consistent under demanding conditions. Its carefully tuned formula reduces drag and lowers operating temperatures, helping maximize drivetrain efficiency and bearing longevity—perfect for competition-level maintenance and rebuilds. Product Details Formulated for hi-speed ceramic and stainless steel bearings Helps lower operating temperatures Reduces drag for improved efficiency Ideal for racing and regular bearing maintenance Precision applicator bottle Includes 10cc / 10ml bottle of Five Star Bearing Oil A must-have pit essential for keeping your bearings smooth, fast, and #superdialed every race day. 🏁  

Read more less

Upgrade your drivetrain with Team Associated Factory Team Bearings — precision 10x15x4mm bearings designed to reduce friction, smooth out rotation, and improve overall performance. Featuring the signature blue shield for easy identification, these premium bearings deliver tighter tolerances and longer-lasting durability compared to stock components. Perfect for restoring worn-out bearing sets or boosting efficiency in your B5M, Apex, Prolite 4x4, ProRally, MGT 3.0, and many more platforms using 10x15x4mm bearings. Features: Premium Factory Team–grade precision bearings Blue-shielded on one side for quick identification Reduces friction and slop for smoother drivetrain operation Ideal upgrade or replacement for worn bearings Compatible with multiple Team Associated platforms Includes: (4) 10x15x4mm Factory Team Bearings

Read more less

  Keep your shocks buttery smooth and leak-free with the TLR X-Ring Shock Seal Set. Designed as a direct replacement for all TLR 22, 22T, and 22SCT vehicles, this kit restores proper damping, reduces stiction, and improves long-term shock consistency. Whether you're rebuilding after a long race weekend or refreshing worn seals, these high-quality X-rings and O-rings provide a precise fit and excellent durability. Features Direct replacement for TLR 22 / 22T / 22SCT platforms X-ring seals deliver reduced friction and longer life Helps maintain smooth, consistent shock performance High-quality material resists swelling and leaking Perfect for routine maintenance or full shock rebuilds Includes (8) X-Ring Lower Cartridge Seals (4) Shock Cap O-Rings (4) Lower Cap O-Rings

Read more less

Overview:Deliver maximum power with ProTek RC Low Profile 5mm “Super Bullet” Connectors, engineered for clean wiring, low resistance, and uncompromising reliability in high-current RC applications. About the Super Bullet ConnectorsThe ProTek RC Low Profile “Super Bullet” connectors feature a flat, lay-down solder design that makes for a tidy and efficient wiring setup—perfect for compact builds or low-clearance installations. Constructed from solid gold-plated brass, these connectors ensure superior conductivity and minimal voltage loss compared to traditional spring-type or Deans-style plugs. Designed for brushless motors, ESCs, chargers, and high-voltage batteries, these connectors set the new standard for performance RC power delivery. Features: Low-profile solder head for flat, lay-down wire connections Solid gold-plated design for ultra-low resistance and maximum efficiency Ideal for high-current / high-voltage applications Perfect for use between ESCs, batteries, motors, or power meters Improved durability and conductivity over traditional plug styles Simple to solder and install Includes: (2) 5mm Low Profile “Super Bullet” Male Connectors Other 5mm Bullet Options: PTK-5022: Standard (4 Male) PTK-5023: Standard (4 Female) PTK-5024: Standard (2 Male / 2 Female)

Read more less

Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less