🔋🔌 A Simple Solution for 4S LiPo Balance ConnectionsThe ProTek RC 4S LiPo Charge/Balance Adapter is designed to provide an XH female to XH female connection for compatible 4S LiPo charging and balancing setups. It’s a handy addition to the pit box when you need to adapt between compatible XH balance connections.🔋 About the 4S LiPo Charge/Balance Adapter🔌 XH Female to XH FemaleThis adapter features an XH female connector on each end, allowing compatible 4S balance connections to be joined without modifying your existing wiring.⚙️ Made for 4S LiPo ApplicationsDesigned specifically for compatible 4S LiPo battery balance connections, making it useful for charging setups that require a female-to-female XH adapter.🧰 Great for the Pit BoxSmall charging adapters are easy to need and not have. Keeping the correct adapter on hand can make setting up your charger at home or at the track much easier.✨ Features✔ Designed for 4S LiPo applications✔ XH female connector on both ends✔ Provides a female-to-female balance connection✔ Compact and easy to keep in your charging gear✔ Useful for compatible charging and balancing setups✔ Genuine ProTek RC accessory📦 Includes (1) ProTek RC 4S LiPo Charge/Balance Adapter🔧 Compatibility Compatible 4S LiPo charging and balance setups using XH connections📝 Notes Verify your battery and charger balance connector type before use. This adapter is intended for the balance connection and does not replace the battery’s main charge lead.

Read more less

  ProTek RC 48P Lightweight Aluminum Pinion Gear (13T–38T)⚙️ Hard Anodized | Lightweight | 3.17mm Bore The ProTek RC 48 Pitch Lightweight Aluminum Pinion Gear is engineered for serious racers looking to reduce rotating mass and increase throttle response. These precision-cut gears are CNC-machined from high-quality 7075-T6 aluminum and hard anodized for exceptional durability and performance. Ideal for off-road and on-road applications using 48 pitch gears, they feature laser-etched tooth counts for quick identification and a lightweight design that promotes quicker motor spool-up and improved acceleration. 🔧 Features: 48 pitch Available in 13T–38T sizes CNC-machined 7075-T6 aluminum Hard anodized for strength and wear resistance Lightweight design with additional machining on 18T and larger Tooth count laser-etched for easy ID Includes set screw for secure mounting 3.17mm (1/8") motor shaft bore 🚀 Optimize your drivetrain with reduced rotational mass and faster response out of corners! 🧩 Includes: (1) Pinion Gear (select size from dropdown) (1) Set Screw

Read more less

Keep ESC and motor temperatures under control with the 30x30x10mm Aluminum High-Speed HV Cooling Fan from ProTek RC. Designed for high-performance RC applications, this compact fan delivers strong airflow while handling true 2S high-voltage power with confidence. The machined aluminum housing helps dissipate heat more efficiently than plastic fans and adds extra protection to the fan blades in the event of a crash. Dual ball bearings ensure smooth, reliable operation at high RPMs, making this fan a durable choice for racing and bashing alike. Pre-wired with a 2-pin JST connector and including a long adapter lead, installation is simple whether you’re powering it from a receiver or another voltage source. ⚠️ Installation Note:Install the fan at least 5mm away from the motor to allow proper airflow and prevent magnetic interference. Features: 30x30x10mm aluminum high-speed cooling fan Ideal for ESC and motor cooling applications Machined aluminum case improves heat dissipation Dual ball bearings for durability and longevity True 2S HV rated (up to 8.75V) Anodized black finish with silver chamfered edges Compact size fits 1/12, 1/10, and 1/8 scale platforms Includes: (1) 30mm Aluminum HV Cooling Fan Pre-installed 2-pin JST connector (1) 200mm adapter lead for easy power connection

Read more less

ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double side tape that has become a must have for RC use. This tape is 1mil thick and is perfect for securing receivers, ESC's or transponders to your RC car. The adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component. Protek RC offers two types of double sided tape, clear and grey. Clear is recommend for warm weather and is superior on carbon fiber surfaces. Features: Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more! Strong adhesion and durability Water proof and heat resistant Reduces vibration Soft and flexible Suitable for curved surfaces Strong tensile strength

Read more less

Overview:Keep your 1/10 buggy clean, protected, and easy to carry with the ProTek RC 1/10 Buggy Carrier Bag — a practical, travel-friendly storage solution designed by racers, for racers. About the Buggy Carrier Bag Clean. Convenient. Compact.Whether you’re heading to the track or packing for a flight, the ProTek RC 1/10 Buggy Carrying Bag makes transport effortless. Designed to hold one complete 1/10 buggy with the body and tires attached, this durable bag keeps dirt and grime contained while protecting your car during travel. It’s compact enough to stack on top of your hauler bag, store neatly in your vehicle, or roll up when not in use. Durable Three-Ply ConstructionBuilt from a premium three-ply material, the bag combines an easy-to-clean outer and inner layer with a thin foam-padded core for extra protection. Two heavy-duty zippers secure the lid while leaving space for your buggy’s rear wing to remain exposed for easy handling. Grab the integrated side handle, the wing, or attach your own shoulder strap (not included) for versatile carrying options. Features: Fits 1/10 buggies with body and tires installed Keeps dirt, dust, and debris contained Foam-padded for added protection during transport Carry-on sized — ideal for flights and compact storage Rolls up for easy packing when not in use Durable three-ply construction for long life Convenient side handle and optional shoulder strap compatibility Specifications: Fits: 1/10 buggy w/body and tires Dimensions (W x L x H): 11.02 x 16.14 x 4.35 in (28 x 41 x 11 cm) Wing Compatibility: Yes (exposed) Shoulder Strap: Compatible (not included)

Read more less

  ProTek RC 2S High Power 30C Micro LiPo Battery (7.4V/240mAh) w/ JST Connector – PTK-5185Power up your micro aircraft or Orlandoo Hunter micro truck with the ProTek RC 2S 240mAh LiPo battery! This lightweight pack delivers big performance in a compact form factor, perfect for indoor flyers, micro helicopters, and tight-fitting RC applications. ⚡ Specs: Voltage: 7.4V (2S) Capacity: 240mAh Discharge Rate: 30C continuous (6A), 50C burst (12A) Size: 22 x 39 x 12mm Weight: 18g Connector: JST 🔋 Perfect For: Small indoor RC aircraft and helicopters Orlandoo Hunter micro trucks ✅ Features: True 30C high-discharge performance Lightweight design for optimized flight time and agility Great fit for models requiring compact 2S LiPo power ⚠️ Important Usage Tips: Always balance charge using a LiPo-compatible charger Never overcharge, over-discharge, or leave unattended while charging Store in a cool, dry place and avoid high-temperature environments Do not charge until fully cooled after use Give your micro models serious juice with this punchy and dependable ProTek 2S LiPo!  

Read more less

Loctite Super Glue Professional Liquid 20g

Read more less

Dial in your tire gluing with ProTek RC’s Precision Stainless Steel Glue Tips—crafted for accuracy, speed, and control. Designed for use with most CA glue bottles, these 0.4mm tips offer a fine, consistent flow ideal for tire beads and other small adhesive tasks. 🛠 Features: Precision 0.4mm tip perfect for tire gluing and detailed adhesive work Reusable stainless steel construction—built to last the life of your glue bottle Works with thin to medium viscosity CA glues Universal fit – compatible with most CA glue bottles Easy to clean and maintain for repeated use 📦 Includes: (10) Precision Stainless Steel Glue Tips Stop the mess and get precise—ProTek RC glue tips are the pro’s choice for clean, controlled applications every time.

Read more less

  Give your brushless system the reliability and protection it deserves with the ProTek RC Braided Sensor Cable. Designed for high-performance RC setups, this premium cable ensures smooth, accurate communication between your ESC and motor — even in the most demanding conditions. Overview The ProTek RC braided sensor cable features flexible silicone-insulated internal wires protected by a rugged black nylon braided sheath. Heat-shrink reinforcement on both ends secures the braid, prevents wear, and keeps the harness stable through constant chassis flex and vibration. The result is a durable, smooth-bending sensor cable that maintains consistent signal integrity for peak motor performance. Compatible with any sensor-based brushless motor system that uses a standard replaceable 6-wire sensor harness. Features Tough nylon braided outer sheath for maximum protection Silicone-shielded internal wires Heat-shrink reinforced ends Flexible, shock-absorbing design Maintains clean and stable ESC–motor data transfer Compatible with all standard 6-wire brushless systems Ideal for racing or high-performance applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 200mm  

Read more less

Built for serious stock-class racers, the ProTek RC 2S 150C Stock Spec 4800mAh Shorty LiPo delivers explosive punch, ultra-low internal resistance, and consistent voltage from tone to tone. Featuring advanced Si-G cell technology and a low-profile LCG shorty design, this pack keeps your car balanced, planted, and fast all the way to the last lap. If you're chasing consistency and clean power delivery in 2WD or 4WD stock racing — this is the pack. ⚡ Stock-Class Performance You Can Trust With 150C discharge capability and extremely low internal resistance, this battery provides: Strong acceleration Stable voltage under load Lower operating temperatures Improved efficiency Extended cycle life The shorty LCG form factor helps optimize chassis balance and weight placement for modern race platforms. 🏁 Designed for Stock Racing This pack is engineered specifically for stock-class competition where smooth, consistent voltage is critical. The improved efficiency and reduced heat build-up keep performance predictable and reliable throughout your main. Features 4800mAh capacity 150C high-discharge rating Low IR Si-G cell technology LCG shorty hardcase design Lighter and thinner profile Strong runtime with aggressive punch 10C maximum charge rate (1C recommended for longest life) ROAR approved Includes (1) ProTek RC 2S 4800mAh Battery (2) 5mm Bullet Connectors Specifications Nominal Voltage: 7.4V (2S) Capacity: 4800mAh Max Charge Rate: 10C (40A) Peak Discharge: 150C Cell Configuration: 2S1P Watt Hours: 35.5Wh ROAR Approved: Yes Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions: 95.3 x 46.9 x 21.2mm Weight: 190g ⚠️ Important LiPo Safety Always balance charge Use a LiPo-specific charger Never leave charging batteries unattended Do not over-discharge (minimum 3.2V per cell) Use a LiPo safe charging bag Allow pack to cool before recharging Reliable voltage. Strong punch. Championship consistency. 🏆  

Read more less

Dial in your car’s balance with precision—anywhere on the chassis.The ProTek RC Self Stick Chassis Weight Strips give racers a compact, customizable way to fine-tune weight bias, improve stability, and optimize handling on any track surface. About the Chassis Weights Each strip includes twelve 5g weights (24 total), backed with strong pre-applied adhesive.Their compact 20×9.4×4.4mm size makes them perfect for tight mounting locations—lay them flat, stack them, or tuck them into hard-to-reach spots to get your setup dialed exactly how you want. Great for: Balancing left/right weight Adding traction on slick tracks Fine-tuning front/rear bias Stabilizing high-powered builds Whether you're prepping for carpet, dirt, oval, or on-road, these weights give you total control over your setup. Features Compact 20×9.4×4.4mm design fits tight spaces Strong pre-applied sticky tape Perfect for fine-tuning chassis weight bias 120g total weight per package Stackable for precise tuning Includes (24) 5g Self-Stick Chassis Weights (12 per strip)

Read more less

Perfect for High-Power Drag Racing Builds📦 Part #: Choose 20T–40T Take your drag racing setup to the next level with the ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear. These pinions are specifically engineered for high-RPM 4-pole motors with 5.0mm shafts, making them ideal for no-prep and straight-line drag applications. Precision-cut for smooth 48 pitch mesh, they're built to deliver maximum efficiency and faster acceleration by reducing rotational mass. 🔧 Key Features: Pitch: 48P (Perfect for drag and speed builds) Bore Size: 5.0mm – fits large shaft 4-pole motors Material: Lightweight aluminum for reduced rotating mass Finish: Hard anodized for durability under high stress Etched Tooth Count: Easy size identification Performance: Quick spool-up, consistent gear mesh, and reliable grip under load 🏁 Why It Matters: Less mass = faster response. Whether you're trying to shave tenths off your ET or just want smoother power delivery, these ProTek pinions give your build the edge where it counts. 👉 Choose from 20T to 40T to dial in your exact gearing needs! Note: Compatible with 48 pitch spur gears and motors that use 5mm output shafts. Always double-check mesh and gear clearance during install.

Read more less

  Need a reliable extension for your servo wiring? The ProTek RC Heavy Duty 15cm (6") Servo Extension Lead is built for strength, durability, and high current capacity. Made with thick 22AWG wire, this extension minimizes resistance while providing dependable performance for demanding RC applications. Perfect for larger scale builds, tight chassis layouts, or any setup requiring extra lead length. Features 15cm (6") servo extension Heavy-duty 22AWG wire High current carrying capacity Durable, flexible insulation JR-style male connector Universal female connector design Connector Details Male End: JR style connector Female End: Compatible with Futaba, JR, Airtronics, and HiTec connectors Note: When using JR style connectors in the female end, verify correct polarity before powering on. Built tough for reliable signal and power delivery — a simple upgrade that prevents headaches in your electronics setup. 🔧  

Read more less

  The ProTek RC 1/10 Buggy Tire Bag is a convenient way to haul and preserve your tires, as well as anything else that fits inside one of six included, airtight 6.5" tall, 3.5" diameter screw on lid storage tubes. The bag itself is made from heavy duty nylon material and measures 12.75" wide, 8.25"deep and 7.5" tall. The lid of the bag features a large ProTek RC logo in white, and has a 12x7.5" mesh zippered pocket on the inside providing a place to stash setup sheets, tools or other small accessories that may come in handy at the track. If you are serious about keeping your gear neat and tidy, this bag is a must have accessory. Features:  Perfect for 1/10 Buggy and On Road Six airtight 6.5" tall, 3.5" diameter PET tubes with screw on lid Heavy duty nylon material  Bag measures 12.75" wide, 8.25"deep and 7.5" tall Internal 12x7.5" mesh zippered pocket 

Read more less

This is a replacement ProTek R/C Metal Servo Gear Set, and is intended for use with the ProTek R/C PTK-160T Low Profile "High Torque" Metal Gear Servos. How To Change Your RC Servo Gears: AMain Hobbies' RC Talk Includes: (1) Gear set (1) Long pin (1) Short pin

Read more less

Keep your tires protected, organized, and race-ready with the ProTek RC 1/10 Buggy Tire Tube. This airtight storage tube measures 6.5" tall with a 3.5" diameter, making it ideal for both 1/10 buggy and on-road tires. Molded from lightweight, durable PET, these tubes are perfect for storing mounted or unmounted tires, and they serve as direct replacements for the tubes included with the ProTek 1/10 Buggy Tire Bag. Includes one clear tube and one screw-on airtight cap. ⭐ Features Perfect size for 1/10 Buggy and 1/10 On-Road tires Airtight design with a secure screw-on lid Lightweight and durable PET construction Great for storage, transport, or organizing spares Replacement tube for the ProTek 1/10 Buggy Tire Bag 📦 Includes (1) Tire storage tube (1) Screw-on cap ⚠️ Note Storage bag shown in photos is not included.

Read more less

  Keep your workspace clean and organized with the ProTek RC Aluminum 1/10 Pinion Gear Caddy — the ultimate pit accessory for racers who like their tools as dialed as their setups. Precision-machined from high-grade aluminum, this caddy securely stores up to 11 pinions, protecting them from damage while keeping them easily accessible for quick gearing changes. ✅ Holds Up to 11 Pinions – Fits standard 1/8" bore pinions✅ CNC-Machined Aluminum – Durable, professional-grade construction✅ Black Anodized Finish – Sleek look with chamfered edges and laser-etched logo✅ Steel Mounting Posts – Prevent pinions from slipping or scratching✅ Perfect for Trackside Adjustments – Keeps your gearing options ready for any setup Includes: (1) ProTek RC Aluminum 1/10 Pinion Gear Caddy ⚡ Stay organized, stay fast — the ProTek Pinion Caddy keeps your gearing game strong and your pit setup pro-level.

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

ProTek RC 1/10 On-Road, Off-Road & Crawler Carrying Backpack The ProTek RC 1/10 Multi-Function Backpack is the perfect option for those looking to get out and enjoy their RCs, without having to balance everything or tote around a hauler bag. Made from high-quality materials, this bag is specifically designed to carry the most common 1/10 RTR Rock Crawlers such as the Traxxas TRX-4 Trail Crawler Truck on 2.2" wheels. The large size also allows you to carry one 1/10 buggy, truck or even a 1/8 buggy! Hook and loop straps allow keep your RC vehicle in place and secure. A convenient side pocket located on the right-hand side is designed to fit the ProTek Tool Bag (PTK-8102 - sold separately) but will also fit the most common RTR-sized transmitters. Load this backpack up and get out to the trails, track or anywhere the spirit of RC takes you!The large internal size makes a great place to mix and match a wide variety of items and even other containers. The bottom of the backpack easily fits the ProTek RC Plastic Storage Container (PTK-8011 - sold separately) and allows you to store small bolts, nuts and other accessories. One front pocket and one side pocket make for great storage of your mobile device and other misc. items. One mesh pocket is designed to fit water bottles and other items. NOTE: The Protek Tool Bag (PTK-8102) and vehicles shown in the photos are for illustrative purposes only and are not included. Features: Designed to fit the most common 1/10 RTR crawlers, touring cars, buggies, trucks and even a 1/8 off-road buggy Internal hook and loop straps allow you to secure your RC model in place Side pockets allow you to store mobile devices, transmitters, batteries tool bags and more Large enough to store other containers in the bottom of the backpack Specifications: Dimensions: Outside: Width: 11.81in (300mm) Depth: 11.81in (300mm) Height: 22.83in (580mm) Inside: Width: 10.23in (260mm) Depth: 11.41in (290mm) Height: 22.04in (560mm)

Read more less

🔋⚡ High-Current Charging with Maximum Efficiency The ProTek RC 2S High Current Charge/Balance Adapter is designed for hobbyists who demand reliable, low-resistance charging performance. Built with heavy-duty 10AWG wire and gold-plated 4mm bullet connectors, this premium adapter is ideal for safely charging or discharging 2S LiPo batteries at higher current levels. The 24-inch coiled cable provides excellent reach while helping keep your charging station organized and free from tangled wires. 🔋 About the 2S High Current Charge Adapter ⚡ Built for High-Current Charging Heavy-duty 10AWG wire minimizes resistance and voltage loss, allowing efficient power transfer during high-current charging and discharging applications. 🔌 Premium Low-Resistance Connections Gold-plated 4mm solid bullet connectors provide a secure, reliable connection while reducing electrical resistance for improved charging efficiency. 🎯 Accurate Balance Charging An integrated 2S XH balance connector ensures proper cell balancing for safer charging and improved battery performance. 🛠️ Organized & Flexible Design The flexible coiled cable helps prevent tangles while providing approximately 24 inches of reach, making it easy to position your batteries during charging. 🔧 Features ✔ Heavy-duty 10AWG wire for high-current charging✔ Gold-plated 4mm solid bullet connectors✔ 2S XH balance connector for accurate balance charging✔ Compatible with chargers using 4mm bullet outputs✔ Low-resistance design for efficient power transfer✔ Flexible coiled cable helps prevent tangles✔ 24-inch cable length for added convenience✔ Ideal for charging or discharging 2S LiPo batteries 📦 Includes (1) ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) 📊 Specifications Specification Details Battery Compatibility 2S LiPo Charge Connector 4mm Solid Bullet Balance Connector 2S XH Wire Gauge 10 AWG Cable Length 24in Version V1 🚗 Compatibility Compatible with: Chargers equipped with 4mm bullet charging outputs 2S LiPo batteries using an XH balance connector ⚠️ Notes Designed for charging and discharging 2S LiPo batteries. Verify connector compatibility with your charger and battery before use. Always follow proper LiPo charging safety procedures and never leave batteries unattended while charging.

Read more less

Built for spec racing and stick pack applications, the ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack delivers lightweight performance, strong voltage, and consistent power from start to finish. Designed to match standard NiMH stick pack dimensions, this battery is ideal for Tamiya TCS racing classes, including Euro Truck, GT, M-Chassis, and Formula One. Utilizing advanced Si-Graphene + HV technology, this pack provides lower internal resistance, improved efficiency, and a flatter discharge curve—meaning more punch and consistent voltage throughout the entire run. The result is longer runtime, cooler operation, and reliable performance when it matters most. 🔧 Features:• 100C discharge rating for strong power and punch• Advanced Si-Graphene + HV technology for low IR and efficiency• Stick pack design fits standard NiMH battery trays• Lighter weight for improved power-to-weight ratio and lower CG• Flatter discharge curve for consistent voltage throughout the run• Increased runtime, cycle life, and durability• Factory-installed T-style (Deans) connector• ROAR Approved for competition use 📦 Includes:• (1) ProTek RC 2S LiPo Stick Pack Battery ⚙️ Specifications:• Voltage: 7.6V (2S LiHV)• Capacity: 5000mAh (5400mAh @ 7.6V)• Discharge Rate: 100C• Max Charge Rate: 10C (50A)• Watt Hours: 38Wh• Connector: T-Style (Deans)• Balance Plug: 3-Pin XH• Dimensions: 137.5 x 46.7 x 24.2mm• Weight: 235g ⚠️ Battery Notes:• Can be charged on a standard LiPo charger or LiHV settings• Balance charge only and never leave unattended while charging• Do not over-discharge (minimum 3.2V per cell)• Allow battery to cool before recharging Perfect for spec racing and stick pack applications, the ProTek RC Si-Graphene HV Stick Pack delivers the lightweight performance, consistent voltage, and reliability serious racers demand.  

Read more less

The ProTek RC SG3 HV ULCG Shorty LiPo Battery combines a lightweight, ultra-low center of gravity design with low internal resistance and high-voltage Silicon Graphene technology. Designed with competitive 1/10 buggy racing in mind, this 4600mAh 2S pack delivers consistent power, improved efficiency, and cooler operating temperatures throughout the run. About the SG3 HV ULCG Shorty LiPo Battery High-Voltage Performance Featuring ProTek's third-generation Silicon Graphene high-voltage cell technology, this pack provides a 7.6V nominal voltage with a 150C peak discharge rating. Lower internal resistance helps improve efficiency and power delivery while reducing operating temperatures. Ultra-Low Center of Gravity The compact 18.5mm height and 155g weight help lower the vehicle's center of gravity and optimize weight balance for improved handling. The shorty configuration is well suited for both 2WD and 4WD 1/10 buggy racing. Race-Ready Connections The battery features 5mm bullet connections and a 2mm balance connection. Two 5mm-to-4mm bullet reducers are also included for additional setup flexibility. Features ✔ 7.6V 2S high-voltage LiPo configuration✔ 4600mAh capacity✔ 150C peak discharge rating✔ Low internal resistance (Low IR) design✔ SG3 third-generation Silicon Graphene technology✔ Ultra-low center of gravity (ULCG) shorty configuration✔ Designed for consistent power delivery and improved efficiency✔ Compact 18.5mm pack height✔ 5mm bullet battery connections✔ 2mm bullet balance connection✔ 5mm-to-4mm bullet reducers included✔ Ideal for 1/10 2WD and 4WD buggy racing✔ ROAR Approved Includes (1) ProTek RC 2S 150C Low IR SG3 HV ULCG Shorty LiPo Battery – 7.6V/4600mAh (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Needed to Complete LiPo-compatible balance charger capable of charging 2S high-voltage (LiHV) batteries Appropriate charging leads/connections for your charger LiPo-safe charging bag or container Specifications Specification Details Brand ProTek RC Part Number PTK-5124-26 Battery Type Silicon Graphene High-Voltage LiPo Configuration 2S1P Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge Rate 150C Maximum Charge Rate 1.5C Watt Hours 34.9Wh Battery Connector 5mm Bullets Balance Connector 2mm Bullet Dimensions 47 x 96 x 18.5mm Weight 155g (5.4oz) ROAR Approved Yes Notes Always use a LiPo-compatible balance charger and LiPo-safe charging bag or container. Never leave LiPo batteries unattended while charging. Do not charge the battery while installed in the vehicle. Do not overcharge or over-discharge the battery. End voltage should not be allowed to drop below 3.2V per cell. Allow the battery to cool completely before recharging after use. Read and follow all battery and charger safety instructions before use.  

Read more less

🔧🏁 Compact, Versatile RC Tool Set for the Bench or Pit Bag The ProTek RC "TruTorque" 5-Piece Hex & Nut Driver Set is a compact and versatile tool kit that's perfect for RC maintenance, repairs, and trackside adjustments. The set combines three commonly used metric hex tips and two nut driver tips with an ergonomic 1/4" drive handle. The interchangeable steel tips fit securely into the included handle and can also be used with a compatible 1/4" drive power driver, making this a handy set for everything from RTR maintenance to race builds and trail repairs. 🔧 About the TruTorque Tool Set ⚙️ Five Essential RC Driver Tips The set includes 1.5mm, 2.0mm, and 2.5mm hex tips, along with 5.5mm and 7.0mm nut drivers, covering many of the most commonly encountered fasteners on hobby-grade RC vehicles. 🖐️ Comfortable 1/4" Drive Handle The molded composite handle features an ergonomic shape that's comfortable to grip while providing plenty of control for installing and removing RC hardware. ⚡ Power Driver Compatible Need to speed things up at the workbench? Each steel tip uses a standard 1/4" drive, allowing the tips to be used directly with compatible power drivers. 🧰 Compact & Easy to Store The included molded plastic holder keeps all five driver tips securely organized. Its compact size makes the TruTorque set an excellent choice for a pit bag, trail bag, hauler, or secondary tool kit. 🔧 Features Compact RC hex and nut driver set Three metric hex driver tips Two metric nut driver tips Durable steel construction Standard 1/4" drive tips Tips fit the included hand driver Compatible with 1/4" drive power drivers Ergonomic molded composite handle Molded tip holder keeps tools organized Great for RTR maintenance and race chassis Ideal for the workbench, pit bag, or trail bag 📦 Includes (1) 1.5mm Hex Driver Tip (1) 2.0mm Hex Driver Tip (1) 2.5mm Hex Driver Tip (1) 5.5mm Nut Driver Tip (1) 7.0mm Nut Driver Tip (1) 1/4" Drive Handle (1) Molded Plastic Tip Holder 📊 Specifications Specification Details Brand ProTek RC Part Number PTK-8462 Product Line TruTorque Hex Sizes 1.5mm / 2.0mm / 2.5mm Nut Driver Sizes 5.5mm / 7.0mm Drive Size 1/4" Tip Material Steel Handle Molded Composite Power Driver Compatible Yes Application RC Building, Maintenance & Repair  

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

 🔧 Professional Precision. Maximum Comfort. Built to Last. The ProTek RC TruTorque SL 2.0mm Ball End Hex Driver is a premium-quality tool designed for racers, builders, and RC enthusiasts who demand precision and durability. Featuring a lightweight CNC-machined aluminum handle, precision HSS steel tip, and rotating end cap, this driver delivers exceptional comfort and control during long wrench sessions. Whether you're making quick setup changes at the track or performing a complete rebuild at the bench, the TruTorque SL series provides the fit and feel professionals trust. ⚡ Features: 🔧 Precision-cut 2.0mm HSS steel ball end tip💪 Durable hardened steel tip resists wear and rounding⚙️ Ball end design allows access to angled fasteners🛠️ CNC-machined aluminum handle with lightweight relief holes✋ Cross-hatch knurling provides exceptional grip and control🔄 Rotating aluminum end cap allows smooth one-handed operation🏁 Laser-etched tip size markings in three locations for quick identification🔩 Replaceable 80mm tip secured with an M3 set screw 📦 Includes: (1) ProTek RC TruTorque SL 2.0mm Ball End Hex Driver 📏 Specifications: Part Number: PTK-8403Tip Size: 2.0mm MetricTip Length: 80mmTip Material: HSS (High Speed Steel)Handle Diameter: 20mmHandle Material: CNC Machined Aluminum 🔧 Perfect For: 🏁 RC Race Vehicles🚗 1/10 Touring Cars🚙 Off-Road Buggies and Trucks🛻 Crawlers and Scale Trucks🚁 Helicopters and Aircraft🛠️ General Hobby Maintenance and Assembly ⚠️ Important Note: ⚠️ Ball end hex drivers are designed for convenience and angled access but are not recommended for high-torque applications such as breaking loose tight fasteners or final tightening. For maximum torque applications, use a standard straight-tip hex driver. 💡 Pro Tip: A quality 2.0mm driver is one of the most-used tools on any RC bench. Investing in premium tools like the TruTorque SL reduces stripped screws, improves fastener engagement, and makes wrenching far more enjoyable over the long haul. 🔧🏁🔥

Read more less

Heavy-duty charge lead for Junsi iCharger 456DUO and other XT90-input chargers Overview:The ProTek RC 2S High Current Charge/Balance Adapter is built for racers who demand maximum efficiency and reliability when charging at high amperage. Designed specifically for Junsi iCharger 456DUO users—and ideal for any charger using XT90 inputs—this cable delivers ultra-low resistance and premium performance for modern high-power LiPo packs. About the High Current Charge/Balance Adapter Built for Serious Power HandlingThis adapter features gold-plated 5 mm bullets for secure, low-loss battery connection and a female XT90 connector for the charger side, ensuring stable current transfer even during extreme charge or discharge cycles. The 10 AWG high-strand wire provides the heavy-duty conductivity needed for charging at higher-than-average amp rates without voltage drop or excess heat. Clean, Tangle-Free DesignThe 24-inch coiled jacket keeps your pit area organized and the cable flexible, while reducing tangling during setup or transport. A 7-pin XH balance connector provides easy balancing for 2S and higher cell count packs—making this a truly versatile, professional-grade charging lead. Features: Designed for Junsi iCharger 456DUO and other XT90-input chargers 5 mm gold-plated bullets for secure battery connection 10 AWG high-strand wire handles extreme current demands Female XT90 connector ensures solid charger connection 7-pin XH balance plug supports up to 6S balancing 24" (61 cm) coiled jacket for flexibility and a tangle-free workspace Low resistance design for maximum charge performance Specifications: Specification Details Wire Gauge 10 AWG Length 24" (61 cm) Charger Connector Female XT90 Battery Connector 5 mm Gold-Plated Bullets Balance Connector 7-Pin XH (Up to 6S) Compatibility Junsi iCharger 456DUO / 458DUO, XT90-input chargers Includes: (1) 2S High Current Charge/Balance Adapter Cable

Read more less