The EcoPower 827 "Mighty Micro" Servo is a high-voltage, metal gear upgrade designed for small-scale vehicles and aircraft. With true HV capability, it eliminates the need for step-down wiring when paired with high-voltage steering servos. Perfect as a Dig/Shift servo in the Axial SCX10 III and Capra, or as a steering servo upgrade for the SCX24 (with optional mount). Lightweight, powerful, and reliable — all at an unbeatable price point. 🔥 Key Features: High Voltage (6.0V–8.4V) digital micro servo 15% more torque than typical SCX24 upgrades Direct replacement for Axial SX107 in SCX10 III Dig/Shift Perfect Dig servo for Axial Capra Steering servo upgrade for Axial SCX24 (requires Samix or Hot Racing mount) Durable metal gear train for long life Includes aluminum clamping servo horn & servo saver adapter Only 12g for lightweight performance 📐 Specifications: Voltage Range: 6.0V – 8.4V Speed: 0.12 sec/60° @ 6.0V 0.10 sec/60° @ 8.4V Torque: 29.1 oz-in (2.1 kg-cm) @ 6.0V 37.5 oz-in (2.7 kg-cm) @ 8.4V Weight: 12g Gears: Metal Spline: 20T Motor Type: Cored DC Lead Length: 275mm ✅ Compatibility: Axial 1/18 Yeti Jr Axial AX24 Axial Capra Axial SCX10 III Axial SCX24 FMS FCX24 / FCX24M / Smasher Furitek Cayman, FX118, Gold Digger, Hiroyama Losi Mini-B Losi Mini-T 2.0 Many other small-scale surface & aircraft applications 📦 Includes: EcoPower 827 Micro Servo Aluminum Clamping Servo Horn Molded Adapter for Axial Servo Saver w/12mm screw Molded Servo Horns w/M2.5 screw ⚠️ Note:Servo horn ships in white; black finish shown in some photos is paintable (e.g. with Tamiya TS-6 Matte Black).

Read more less

Expand your micro RC’s potential.The EcoPower Servo Wire Splitter is a simple but powerful upgrade for your Losi® Micro-B™ or Micro-T™. This compact plug-and-play adapter lets you connect extra electronics—like LED lights, lap transponders, or other powered add-ons—without losing a receiver port or rewiring your system. It’s the cleanest way to boost capability in tight 1/24-scale builds. Plug in. Power up. Keep it clean.Designed to maintain full power and signal integrity, the EcoPower Splitter delivers dependable connections for small-scale racers and hobbyists alike. Its lightweight, flexible design tucks neatly into cramped chassis spaces, keeping your wiring tidy while opening new possibilities for customization. ⚙️ Features Expands one receiver port into two Perfect for lights, transponders, or other accessories Maintains signal integrity and clean power delivery Compact, lightweight, and flexible wiring Plug-and-play installation—no soldering required Built for Losi® Micro-B™ & Micro-T™ vehicles 📦 Includes (1) EcoPower Servo Wire Splitter      

Read more less

  Upgrade your small-scale rig with serious performance using the EcoPower 640T 13g Waterproof Metal Gear Digital Sub Micro Servo. Designed as a high-torque, high-speed drop-in replacement for the Traxxas 2065, this servo is a powerful solution for TRX-4 Dig/Shift functions and works with the TRX-4M (when paired with the Samix Brass Mount — sold separately). Features: Direct replacement for Traxxas 2065 (TRX-4 Dig/Shift) Compatible with TRX-4M when used with Samix Mount (SAMTRX4M-4068) Waterproof up to 1 meter Metal gears for durability Digital circuitry with cored motor .09 sec transit speed and 64 oz-in torque at 6.0V Includes servo horns (4-way, dual, single) and mounting hardware 1-Year Manufacturer Warranty* Specifications: Voltage: 4.8V–6.0V Speed: 0.09 sec @ 6.0V Torque: 64 oz-in (4.6kg-cm) @ 6.0V Weight: 13g Output Shaft: 25T spline Lead Length: 315mm Dimensions: 23.5 x 12.5 x 25mm (30mm tall at output) Compatibility Notes: Fits TRX-4 directly Fits TRX-4M only with Samix Brass Mount (SAMTRX4M-4068) Slightly taller than the Traxxas 2065 – check clearance in other applications Take your mini rig to the next level with the EcoPower 640T — compact size, big performance! *Warranty does not cover stripped gears or damage from abuse.

Read more less

Smart. Safe. Simple. Keep your batteries powered and protected with the EcoPower 4-Slot USB NiMH/NiCD Charger — an intelligent, microcomputer-controlled charger designed for AA and AAA rechargeable batteries. Whether you're charging for transmitters, receivers, radios, or everyday devices, this compact charger delivers reliable performance with modern safety features. About the Charger Advanced Charging Control Engineered with intelligent microcomputer supervision, this charger monitors each battery in real time. The constant-current pulse charging profile is optimized specifically for NiMH and NiCD chemistries, ensuring accurate, efficient, and safe charging every time. Three independent stop-charging safeguards prevent overcharging and extend battery life — perfect for hobbyists who rely on consistent power. Versatile & User-Friendly Charge 1 to 4 AA or AAA batteries at the same time.Each slot charges independently, so mixed batteries aren’t an issue. A micro-USB input makes it easy to use wall adapters, power banks, computer ports — anything you’ve got.Every slot features its own red/green LED indicator, giving you instant status at a glance. Safety First Built-in protective circuits ensure peace of mind: Reverse-polarity protection Short-circuit protection Intelligent voltage monitoring Maximum-voltage auto-shutoff This means your batteries and charger stay safe — even if something is inserted backward or plugged into a questionable USB port. Features Charges AA & AAA NiMH/NiCD batteries (1–4 at a time) Independent charging control per slot Red/Green LED charge indicators Intelligent microcomputer voltage monitoring Reverse-battery and short-circuit protection Constant current pulse charging Micro USB input Compact, travel-friendly design Includes (1) EcoPower 4-Slot USB Battery Charger (1) USB Cable Product Manual Needed to Complete USB wall adapter or USB power bank Specifications Input Voltage 5V USB Output Voltage 1.53V Battery Types AA/AAA NiMH or NiCD Indicators Red/Green LED  

Read more less

High torque. Waterproof confidence. Proven reliability.The EcoPower WP110T is the ultimate affordable upgrade for 1/10-scale surface vehicles. Delivering 280 oz-in of torque at 6.0 V, this servo adds serious steering muscle and durability to any 2WD or 4WD buggy, monster truck, short-course truck, or even boat. Whether you’re bashing in the rain, ripping through mud, or racing on high-traction tracks, the WP110T’s waterproof aluminum-center case and full metal geartrain are built to take it. Tough, precise, and backed by EcoPower.Rated waterproof up to 1 meter, the WP110T handles snow, puddles, and wet-track abuse without missing a beat. Dual ball bearings, digital circuitry, and a cored DC motor deliver smooth, responsive steering that works perfectly with modern gyro and traction-control systems. Plus, EcoPower backs it with a 1-year warranty so you can send it with confidence. 💪 Features 280 oz-in torque @ 6.0 V with 0.16 sec transit speed Waterproof to 1 meter (IP67 rated) Full-metal geartrain & 25-tooth output spline Cored DC motor with digital circuitry Aluminum center case for cool operation Dual ball bearings for smooth rotation 220 mm servo lead Includes aluminum clamping horn plus plastic star, 4-way, dual, single & round horns with hardware Backed by EcoPower 1-year limited warranty (gears & abuse excluded) ⚙️ Specifications Spec Value Model WP110T Recommended Application 1/10 Scale Surface Waterproof Yes (1 m rated) Operating Voltage 4.8 – 7.4 V Speed @ 4.8 V 0.18 sec / 60° Speed @ 6.0 V 0.16 sec / 60° Speed @ 7.4 V 0.14 sec / 60° Torque @ 4.8 V 175 oz-in (12.6 kg-cm) Torque @ 6.0 V 280 oz-in (20.1 kg-cm) Torque @ 7.4 V 334 oz-in (23.9 kg-cm) Gears Full Metal Output Spline 25 Tooth Motor Type Cored DC Weight 1.87 oz (53 g) Pulse/Frequency 1520 µs / 333 Hz Operating Temp 14°–140 °F (-10 – +60 °C) ✅ Compatibility Arrma Granite 4×2 Boost / Original Arrma Senton 4×2 Boost Arrma Vorteks Original Losi 22S Drag / 22S SCT Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD  

Read more less

  ⚡ Simple. Versatile. LiHV Ready. Looking for a no-fuss charger that gets the job done without breaking the bank? The EcoPower Electron 44 AC delivers reliable charging performance for a variety of LiPo, LiFe, and LiHV batteries in a compact and affordable package. It’s perfect for hobbyists who want quality and consistency—without all the extra frills. ✅ 2S–4S LiPo, LiFe, and LiHV Compatible✅ Selectable charge rates: 1A / 2A / 3A / 4A (50W max)✅ Built-in balancer + Hi-Voltage (LiHV) mode✅ Compact, lightweight, and ultra-portable✅ Includes T-style charge lead 🔧 Specifications:• Input: AC 100–240V• Supported chemistries: LiPo / LiFe / LiHV• Cell Count: 2S–4S• Charge Power: 50W max• End Voltages: LiPo 4.2V / LiFe 3.6V / LiHV 4.35V• Balancer: 300mA drain• Weight: 220g• Dimensions: 69.4 x 110.7 x 40.5mm 📦 Includes:• (1) Electron 44 AC Charger• (1) T-Style Charge Lead• (1) Instruction Sheet ⚠️ Note: Not recommended for Traxxas ID or Spektrum Smart batteries with IC connectors. 💡 Reliable charging. Lightweight build. Affordable price. The Electron 44 AC is the smart choice for everyday RC charging needs.

Read more less

Meet the EcoPower WP173 — a high-voltage, high-torque, high-speed aluminum micro servo built to dominate the 1/16 & 1/18 scale world. Waterproof, fully metal-geared, and engineered for precision, this servo is the ultimate upgrade for Traxxas®, Axial®, Losi®, Arrma® Grom™, TRX-4M™ (with mount), and more. Designed for brutal performance and long-term durability, the WP173 packs a coreless motor, an aluminum case, and torque numbers that punch way above its size. High-Performance Speed & Torque Whether you're racing, crawling, or bashing, the WP173 delivers lightning-fast response and incredible power: Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Smooth, crisp control — even under heavy load. Built for Abuse This servo is ready for the rough stuff: Full metal gear train Waterproof aluminum case Ball-bearing supported output Includes aluminum servo horn Long-lasting durability for harsh environments Wide Compatibility A true drop-in powerhouse for most micro platforms: Arrma® Grom Series:Gorgon • Granite • Mojave • Quake • Typhon Axial:1/18 Yeti Jr FMS:FCX18 • FCX24 • FCX24M Furitek:Cayman • Cayman Pro • FX118 • Gold Digger • Hiroyama • TerraX Losi:Mini Drag • Mini-B • Mini-T 2.0 • NASCAR Redcat:Ascent-18 Traxxas:TRX-4M™ & TRX-4MT™ (Requires EcoPower CNC Aluminum Servo Mount ECP-3072) Features: High torque + high speed performance Waterproof aluminum case Digital coreless motor Full metal gear construction Aluminum servo horn included 25-tooth output shaft (standard micro) Operates from 6V–8.4V Compact size for 1/16 & 1/18 models Built for racers, crawlers, and bashers Includes: (1) EcoPower WP173 Aluminum Digital Micro Servo (1) Aluminum Servo Horn (2) Composite Servo Horns Mounting Hardware Specifications: Application: 1/24, 1/16, 1/18 Input Voltage: 6V–8.4V Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Motor: Digital Coreless Output Shaft: 25T • 5mm Gear Material: Metal Dimensions: 23 × 12 × 31.75mm Weight: 23g Tech Notes: Do not exceed 8.4V. Waterproof, but prolonged submersion may weaken seals. TRX-4M platforms require the EcoPower ECP-3072 Aluminum Servo Mount.

Read more less

EcoPower XT60 to EC2 Charge Lead (Female XT60 to Male EC2) (4.5") (18AWG) – ECP-1530 Charge with confidence using the EcoPower XT60 to EC2 Charge Lead. Built for durability and performance, this 4.5" lead features gold-plated bullet connectors and 18AWG wiring for reliable charging of low to mid current batteries. The XT60 end includes a removable wire cover, making it easy to service or resolder if needed. Features: Female XT60 to Male EC2 configuration Gold-plated bullet connectors for optimal conductivity Durable 18AWG wire for low to mid current charging XT60 wire cover for easy resoldering access 4.5" total length Includes: (1) XT60 to EC2 Charge Lead (4.5", 18AWG)    

Read more less

Charge your LiPo batteries with confidence using the EcoPower Large Flame Resistant Charging Bag. Designed to help contain a fire in the event of a LiPo failure, this 23x30cm (9x11.8") safety bag is a must-have for RC enthusiasts who prioritize safety and compliance. Features: Fire-resistant material rated up to 30 watt-hours Industrial-grade Velcro seal for secure closure Reduces severity and helps contain LiPo fires Ideal for charging, storage, and transport Required by many tracks and clubs, including ROAR-sanctioned events Convenient charge lead access via side vents Instructions for Use: Set charger to correct rate and confirm polarity Connect leads and place battery at the bottom of the bag Route wires through vent and close the top flap securely Place bag on a non-flammable surface Charge your battery safely with added peace of mind Specifications: Dimensions: 230 x 300mm (9 x 11.8 in) Capacity: Up to 30 watt-hours Important Safety Notes:⚠️ Never leave a charging battery unattended⚠️ Always charge on a non-flammable surface⚠️ Not recommended for batteries over 30Wh Protect your workspace and your equipment — the EcoPower LiPo Safe Charging Bag is a simple, affordable way to add an essential layer of safety to your RC charging routine.

Read more less

Expand your RC electronics setup with the EcoPower Heavy Duty Universal Servo Y Extension Lead. Designed for reliable signal splitting and dependable power delivery, this heavy-duty harness allows you to run two servos from a single receiver channel while maintaining consistent performance in demanding applications. Featuring thick 22AWG wiring and universal connector compatibility, the ECP-1542 is an excellent choice for crawlers, boats, airplanes, dual-servo steering setups, and custom RC builds. ⚡ Features: 🔌 Splits one receiver channel into two servo outputs💪 Heavy-duty 22AWG wire construction for increased current capacity📏 Convenient 15cm (6-inch) length⚙️ JR-style male connector for broad compatibility🔧 Dual female servo connectors🚀 Handles high-current applications with ease🛡️ Durable insulation for long-lasting reliability🌎 Compatible with most major servo brands and radio systems 📦 Includes: (1) EcoPower Heavy Duty 15cm Universal Servo Y Extension Lead(1 Male Connector / 2 Female Connectors) 📏 Specifications: Part Number: ECP-1542Length: 15cm (6in)Wire Gauge: 22AWGConnector Type: JR Style Male to Dual Female Servo Connectors 🔧 Compatibility: Compatible with: Futaba Servos JR Servos Airtronics Servos HiTec Servos Most standard RC receiver and servo systems Perfect for: Dual steering servo setups Dual elevator servos Scale accessories Winch systems Lighting controllers Custom RC projects 💡 Pro Tip: Servo Y-harnesses are commonly used in crawlers and monster trucks running dual steering servos. For high-torque servo applications, make sure your BEC or receiver power system is capable of supplying enough current for both servos operating simultaneously. 🔥🔌🏁

Read more less

The Revolution of Powerful Budget Mini Servos The EcoPower WP827-X24 Digital High-Voltage Micro Servo is a purpose-built performance upgrade for Axial™ SCX24 crawlers. Featuring an innovative direct axle-mount design, this servo eliminates the need for a separate servo mount, providing a rigid, low-profile installation with increased chassis clearance. With high torque, fast speed, metal gears, and waterproof construction, the WP827-X24 delivers outstanding steering performance at an unbeatable value. Key Features Direct axle-mount design – no servo mount required Ultimate budget upgrade for Axial™ SCX24 platforms High-voltage capable (6.0–8.4V) 62.5 oz-in torque @ 8.4V Fast steering response All-metal heavy-duty gears & output shaft Waterproof for trail and wet conditions Coreless motor for smooth, precise control Includes CNC-machined aluminum 25T servo horn Backed by a 1-year warranty Specifications Application: 1/24 & 1/18 Voltage: 6.0V – 8.4V Speed: @6.0V: 0.10 sec/60° @8.4V: 0.08 sec/60° Torque: @6.0V: 48.6 oz-in (3.5 kg-cm) @8.4V: 62.5 oz-in (4.5 kg-cm) Motor: Digital Coreless Output Shaft: Mini 25T Gear Material: Metal Dimensions: 0.9 × 0.47 × 1.25 in (23 × 12 × 31.75 mm) Weight: 16g Includes (1) WP827-X24 Digital Micro Servo (1) CNC Aluminum Servo Horn (2) Composite Servo Horns Compatibility Axial™ SCX24 platforms⚠️ Not compatible with the SCX24 Deadbolt version Tech Notes Do not exceed 8.4V — higher voltage may damage the servo Waterproof design, but prolonged submersion is not recommended  

Read more less

🔋⚡ An Easier, Safer, and Smarter Way to Power Your RC Vehicle The EcoPower Electron Intelligent LiPo Battery takes the guesswork out of battery charging and maintenance. Designed to work seamlessly with the EcoPower Electron Mini Intelligent Charger (ECP-1007), this innovative battery automatically communicates charging parameters to the charger for a safer, more convenient experience. Whether you're new to RC or a seasoned hobbyist, the Electron system makes powering your vehicle simpler than ever. 🔋 About the Electron Intelligent Battery ⚡ Intelligent Charging Technology When paired with the EcoPower Electron Mini Charger, the battery automatically identifies itself and communicates critical charging information, allowing the charger to: Detect battery type automatically Adjust charging settings appropriately Simplify operation with one-touch charging modes Reduce charging errors The Electron Mini Charger's simple Charge and Storage buttons make battery care quick and easy. 🛡️ Enhanced Charging Safety The intelligent charging system helps prevent common mistakes that can damage LiPo batteries, making it especially beneficial for beginners. Features include: Automatic parameter recognition Built-in safety safeguards Intelligent balance technology Enhanced battery protection 🔥 Longer Battery Life Advanced monitoring and charging controls help maximize battery performance while extending overall battery lifespan. 🔧 Features ✔ Intelligent charging technology when used with the Electron Mini Charger✔ Automatic identification of battery parameters✔ Records and tracks battery information✔ Automatically adjusts charging settings for improved safety✔ Integrated intelligent balance plug design✔ High-quality lithium polymer cells✔ Customizable charging settings for enhanced protection✔ Helps prolong battery lifespan✔ XT60 connector for broad compatibility 📦 Includes (1) EcoPower Electron 2S 50C Intelligent LiPo Battery (ECP-3155) 👍 Recommended To Complete EcoPower Electron Mini Intelligent Charger (ECP-1007) EcoPower Essential Tool Kit with Pouch EcoPower Flame Resistant LiPo Charging Bag 📊 Specifications Specification Details Nominal Voltage 7.4V (2S) Capacity 3500mAh Continuous Discharge 50C Peak Discharge N/A Maximum Charge Rate 1C Cell Configuration 2S1P Watt Hours 25.9Wh Battery Connector XT60 Balance Connector Intelligent Dimensions 4.33 x 1.40 x 0.87in (110 x 35 x 22mm) Weight 6oz (170g) ROAR Approved No 🚗 Compatibility Designed for: Traxxas® Mini Maxx® (requires SAMXT60M-TRXF adapter, sold separately) Traxxas® Mini XRT® (requires SAMXT60M-TRXF adapter, sold separately) Other RC vehicles utilizing XT60 battery connectors and compatible dimensions 💡 Perfect For ✔ Traxxas Mini Maxx owners✔ Traxxas Mini XRT owners✔ New RC hobbyists✔ Drivers wanting simplified charging✔ Bashers and backyard enthusiasts✔ Anyone looking for a safer LiPo charging experience ⚠️ Important LiPo Safety Information NEVER leave a battery inside your model while charging. NEVER leave lithium batteries unattended while charging. ALWAYS balance charge LiPo batteries. ALWAYS use a LiPo-safe charging bag or charging box. ONLY use chargers designed specifically for LiPo batteries. NEVER over-discharge LiPo batteries. Carefully read and understand all instructions before use. Battery Care Recommendations Fully charge the battery before its first use. For the first 5 cycles, discharge only up to approximately 50% capacity. Do not discharge below 3.2V per cell. Do not charge a hot battery—allow approximately 20 minutes to cool before recharging. Avoid exposing batteries to direct sunlight, temperatures above 95°F (35°C), or leaving them inside hot vehicles. For best lifespan, avoid using more than 80% of total battery capacity during operation. 💡 Pro Tip: Pair the Electron battery with the EcoPower Electron Mini Charger (ECP-1007) to unlock the full intelligent charging experience, including automatic battery recognition and simplified Charge/Storage modes. 🔋⚡🏁

Read more less

Replacement high-strength steel cup style set screws designed for RC applications requiring secure and reliable fastening. Ideal for use in pinion gears, drive components, and general maintenance. ✅ 3mm thread diameter✅ 4mm length✅ Cup style tip for secure grip✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x4mm cup style set screws  

Read more less

  ⚙️💪 High-Torque, Waterproof Performance for 1/10 RC Vehicles The EcoPower WP125T Waterproof High Torque Metal Gear Digital Servo is a dependable high-voltage steering upgrade for a wide variety of 1/10-scale RC vehicles. Featuring a powerful coreless motor, full metal geartrain, waterproof construction, and up to 400 oz-in of torque, the WP125T delivers the strength, speed, and durability needed for crawling, bashing, trail driving, and high-performance off-road applications. Backed by EcoPower's Lifetime Gear Warranty through AMain Hobbies, it's built to perform with confidence. ⚙️ About the WP125T Servo 💪 Powerful High-Torque Performance Operating on 6.0–8.4V, the WP125T delivers up to 400 oz-in (28.8 kg-cm) of torque with fast transit speeds, providing strong steering authority for demanding terrain and larger tires. 🔩 Full Metal Gear Construction The durable all-metal geartrain resists wear and damage under heavy loads while dual ball bearings and a coreless motor provide smooth, precise steering response. 💧 Waterproof Reliability Sealed waterproof construction protects the servo from rain, mud, snow, and wet conditions, making it an excellent choice for year-round outdoor driving. 🔧 Features ✔ High-voltage digital servo (6.0–8.4V)✔ Up to 400 oz-in of torque✔ Full metal geartrain✔ Coreless motor for smooth, responsive performance✔ Dual ball bearings✔ Waterproof up to one meter✔ Enhanced waterproof sealing✔ 25T output spline✔ Includes aluminum 25T clamping servo horn✔ Lifetime Gear Warranty through AMain Hobbies 📦 Includes (1) EcoPower WP125T Waterproof High Torque Digital Servo (1) Aluminum 25T Clamping Servo Horn Servo Hardware & Grommets 📊 Specifications Specification Details Part Number ECP-125T Application 1/10 Surface Operating Voltage 6.0–8.4V Motor Type Coreless Gear Material Metal Output Spline 25T Bearings Dual Ball Bearings Waterproof Yes Speed @ 6.0V 0.11 sec/60° Speed @ 7.4V 0.09 sec/60° Torque @ 6.0V 337 oz-in (24.4 kg-cm) Torque @ 7.4V 400 oz-in (28.8 kg-cm) Pulse/Frequency 1520µs / 333Hz Dimensions 39.5 x 20 x 38.9mm Weight 2.5oz (70.9g) 🚗 Compatibility Compatible with many 1/10-scale RC vehicles, including: ARRMA Big Rock 3S BLX ARRMA Granite ARRMA Infraction MEGA ARRMA Infraction 3S BLX ARRMA Senton ARRMA Vorteks Axial Capra Axial SCX10 II Axial SCX10 III Losi 22S Drag Losi 22S SCT Losi Tenacity DB Losi Tenacity TT Pro Traxxas Bandit Traxxas Hoss Traxxas Rustler 2WD & 4X4 Traxxas Slash 2WD & 4X4 Traxxas Stampede 2WD & 4X4 Traxxas TRX-4 ⚠️ Notes Includes a 25T aluminum clamping servo horn and installation hardware. Covered by the EcoPower Lifetime Gear Warranty through AMain Hobbies. • • Verify servo dimensions, spline count, and mounting requirements before installation.

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

⚙️ Massive Torque. Direct Fit. Built for Serious Crawlers. Take your Axial SCX24 to the next level with the EcoPower WP173-X24, the ultimate high-performance steering servo designed specifically for SCX24 platforms. Featuring an innovative direct axle mounting system, this servo eliminates the need for a separate servo mount, providing a cleaner installation, improved rigidity, and additional chassis clearance. With an incredible 173 oz-in of torque, blazing-fast response, a full aluminum case, metal gears, and a waterproof design, the WP173-X24 is built to tackle everything from backyard trails to the toughest competition crawling courses. Best of all, it's backed by a Lifetime Gear Warranty through AMain Hobbies, giving you confidence every time you hit the rocks. ⚡ Features: ⚙️ Direct-fit upgrade for Axial™ SCX24 platforms🔩 Innovative direct axle mount eliminates the need for a separate servo mount💪 Incredible 173 oz-in (12.5kg-cm) of torque at 8.4V⚡ Lightning-fast 0.07 sec/60° response at 8.4V🛡️ CNC-machined aluminum case with cooling fins for superior durability🔧 Heavy-duty all-metal gear train with Lifetime Gear Warranty🎯 Coreless digital motor delivers smooth, precise steering control💧 Waterproof design for mud, water, and trail adventures🔋 High-voltage compatible (6.0V–8.4V)🔥 Includes aluminum 25T servo horn for maximum strength 📦 Includes: (1) EcoPower WP173-X24 Aluminum Digital Micro Servo(1) CNC Aluminum 25T Servo Horn(2) Composite Servo HornsLifetime Gear Warranty through AMain Hobbies 📏 Specifications: Part Number: ECP-173-X24 Application: 1/24 & 1/18 Scale Crawlers Operating Voltage: 6.0V–8.4V HV Speed: 6.0V: 0.09 sec/60° 8.4V: 0.07 sec/60° Torque: 6.0V: 123 oz-in (8.9 kg-cm) 8.4V: 173 oz-in (12.5 kg-cm) Motor Type: Digital Coreless Gear Material: Full Metal Output Spline: Mini 25T Dimensions:23 x 12 x 31.75mm(0.90 x 0.47 x 1.25 in) Weight: 16g 🔧 Compatibility: ✅ Axial SCX24 C10✅ Axial SCX24 Jeep Wrangler✅ Axial SCX24 Bronco✅ Axial SCX24 Gladiator✅ Axial SCX24 Power Wagon✅ Most SCX24 wheelbases Not Compatible With:❌ Axial SCX24 Deadbolt ⚠️ Important Notes: Maximum operating voltage is 8.4V. Exceeding this may damage the servo. Waterproof construction is designed for wet conditions, but prolonged submersion may reduce the effectiveness of the seals over time. 💡 Pro Tip: If you've added brass upgrades, weighted wheels, or larger tires to your SCX24, upgrading the steering servo should be one of your first modifications. The WP173-X24's direct-mount design, massive torque, and precision control make it one of the best upgrades for improving steering performance and crawling confidence on technical terrain. 🪨🚙🔥

Read more less

 ⚡ Simple. Reliable. Plug-And-Charge Convenience. The EcoPower Electron Li32 AC Charger is the perfect hassle-free charging solution for hobbyists who want safe, reliable LiPo charging without complicated menus or programming. Designed specifically for 2S and 3S LiPo batteries, this compact balance charger automatically detects battery voltage and begins charging through the XH balance port—making it an excellent choice for beginners and experienced RC users alike. Compatible with popular platforms like the Losi Mini-B and Mini-T, the Electron Li32 AC delivers dependable charging performance in an ultra-portable package. ⚡ Features: 🔋 Designed specifically for LiPo battery charging⚙️ Compatible with 2S 7.4V and 3S 11.1V LiPo batteries🔌 Simple plug-and-charge operation—no programming required🧠 Automatically detects battery voltage and starts charging📡 Charges directly through XH balance plug connections💡 LED charging status indicators for easy monitoring🏁 Perfect for Losi Mini-B and Mini-T platforms👜 Compact lightweight design for easy transport and storage 📏 Specifications: Part Number: ECP-1004Input Voltage: 100–240V AC 50/60HzBattery Chemistry: LiPo OnlyCharge Current: 2.0A (25W Max)Balance Port Drain: 300mA per cellSupported Cell Count: 2S–3S LiPoDimensions: 110x65x38mmWeight: 150g 📦 Includes: (1) EcoPower Electron Li32 AC Charger(1) Instruction Sheet 🔧 Compatibility: Axial SCX24Losi Mini-BLosi Mini-T 2.02S & 3S LiPo Batteries with XH Balance Plugs ⚠️ Important Battery & Charging Warnings: ⚡ LiPo batteries should NEVER be left unattended while charging.🔥 ALWAYS use a LiPo-safe charging bag or container.🔋 ALWAYS balance charge LiPo batteries.🚫 DO NOT use this charger with NiMH or NiCd batteries.⚠️ Not recommended for Traxxas ID batteries or Spektrum Smart IC batteries without proper adapters and procedures. 💡 Pro Tip: This charger is an awesome low-cost solution for mini RC vehicles—especially if you want something simple and dependable without dealing with complicated charger menus or settings.

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 8mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x8mm button head screws  

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 12mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x12mm button head screws  

Read more less

Replacement high-strength steel cup style set screws designed for RC applications requiring secure and reliable fastening. Ideal for use in pinion gears, drive components, and general maintenance. ✅ 3mm thread diameter✅ 3mm length✅ Cup style tip for secure grip✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x3mm cup style set screws  

Read more less

⚡🏁 Brushless Power Upgrade for ARRMA Grom & Small-Scale RC Platforms The EcoPower 35A Brushless ESC & 4600kV Motor Combo is a performance-focused upgrade designed for small-scale RC vehicles, including the ARRMA Grom series. Pairing a programmable 35A sensorless ESC with a high-torque 4600kV brushless motor, this system delivers smooth throttle response, strong acceleration, and dependable power in a compact package. Designed for 1/14, 1/16, and 1/18 scale vehicles, the combo supports 2S-3S LiPo power and comes equipped with an IC2 battery connector. About the EcoPower Brushless Combo ⚡ 35A Programmable ESC The included sensorless ESC delivers 35A continuous and 120A burst current with built-in low-voltage cutoff, overheat, signal-loss, and overload protection. Its waterproof and dustproof construction helps provide dependable performance in demanding conditions. 🏎️ 4600kV Brushless Power The included 4-pole, 12-slot 4600kV motor features a CNC-machined aluminum can, precision-balanced rotor, high-purity copper windings, and ABEC5 bearings. It's designed to provide an efficient combination of torque, acceleration, and top-end performance for small-scale bashers. 🔧 Programmable Performance The ESC can be tuned using the optional EcoPower ESC Program Card ECP-8021 (sold separately), allowing drivers to adjust settings including low-voltage cutoff, braking, reverse force, and throttle response. Features ✔ 35A sensorless brushless ESC✔ 120A burst current✔ 4600kV 4-pole brushless motor✔ Designed for 1/14, 1/16, and 1/18 scale RC vehicles✔ Supports 2S-3S LiPo and 4-9 cell NiMH batteries✔ IC2 battery connector✔ 3.5mm motor bullet connectors✔ Waterproof and dustproof ESC construction✔ CNC-machined aluminum motor can✔ Precision-balanced motor rotor✔ ABEC5 motor bearings✔ 5.0V/2A BEC✔ Multiple built-in electronic protections✔ Programmable with optional ECP-8021 Program Card✔ Excellent brushless upgrade option for ARRMA Grom platforms Includes (1) EcoPower 35A Brushless ESC w/IC2 Connector (1) EcoPower 4600kV 4-Pole Sensorless Brushless Motor (1) Instruction Manual Needed to Complete Compatible receiver ESC/servo mount Compatible battery Compatible battery charger Optional EcoPower ESC Program Card ECP-8021 for programming Specifications Specification Details ESC Application 1/18, 1/16 & 1/14 Bashing Motor Type Brushless – Sensorless Input Voltage 2-3S LiPo / 4-9 Cell NiMH Continuous Current 35A Burst Current 120A Dimensions 40 x 32 x 20mm Weight 37g (1.31oz) BEC 5.0V / 2A Battery Connector IC2 Motor Connectors 3.5mm Bullet Programmable Yes Motor Type Brushless – Sensorless kV Rating 4600kV Poles 4 Input Voltage 2-3S LiPo Power 400W Motor Connectors 3.5mm Bullet Weight 22.6g (0.8oz) Shaft Length 12mm (0.47") Shaft Diameter 2.3mm (0.09") Compatibility Designed for small-scale RC applications including: ARRMA Grom Series LOSI Nascar Series Other compatible 1/14, 1/16, and 1/18 scale RC vehicles Fitment and additional components required may vary by vehicle. Notes This combo replaces the stock 2-in-1 ESC/receiver system on applicable ARRMA Grom vehicles. A separate receiver and ESC/servo mount are required. Remove any cooling fan before operating the ESC in wet conditions. Clean and thoroughly dry the ESC and electrical connections after wet use. Optional EcoPower ECP-8021 Program Card sold separately. Always verify vehicle, battery, gearing, and mounting compatibility before installation.  

Read more less

🔩🛠️ Strong Hardware. Precise Fit. Built to Last. Upgrade or replace your hardware with EcoPower High Strength Steel Button Head Screws. Designed for durability and reliability, these screws are perfect for maintenance, repairs, and custom builds. 🏁 About These Screws 💪 High Strength Steel Construction Built from durable steel, these screws offer improved strength and resistance to stripping compared to standard hardware. 🎯 Precise Fitment Manufactured to exact specifications for a secure and consistent fit in your RC components. 🛠️ Essential Hardware Ideal for replacing worn or lost screws or keeping extras on hand for quick repairs. 🔧 Key Features ✔ High strength steel construction✔ Button head design✔ Durable and reliable hardware✔ Helps resist stripping✔ Ideal for maintenance and repairs 📦 Includes (10) 2.5x4mm Button Head Screws 📊 Specifications Size: M2.5 x 4mm Head Type: Button Head Material: Steel 🧰 Recommended Use General RC repairs Replacing worn or stripped screws Custom builds and upgrades

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 6mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x6mm flat head screws

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 10mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x10mm flat head screws

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 8mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x8mm flat head screws

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 16mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x16mm flat head screws  

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 18mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x18mm flat head screws  

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 12mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x12mm flat head screws  

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 10mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x10mm button head screws

Read more less

Replacement high-strength steel flat head screws designed for RC maintenance and assembly. Ideal for applications requiring a flush-mounted fastener. ✅ 3mm thread diameter✅ 20mm length✅ Flat head design for flush mounting✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x20mm flat head screws  

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 16mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x16mm button head screws

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 20mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x20mm button head screws

Read more less