JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are engineered for carpet and turf racing, offering exceptional traction, stability, and durability. Designed with radius-positioned pins and a low-profile carcass, these tires provide quick transitions, minimal side-wall deflection, and maximum grip on high-traction surfaces. Pre-mounted on JCO3348 Mono wheels and featuring plush open-cell inserts, they are race-ready straight out of the package. Features: ✔️ Pre-mounted for quick and hassle-free installation✔️ Low-profile carcass for reduced side-wall flex and quicker response✔️ Reverse “water tower” pin shape for enhanced grip and control✔️ Radius-positioned pin arrangement for maximum surface contact✔️ Directional sidewall lugging for precise cornering and acceleration✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Plush open-cell inserts included for added control and stability✔️ Mounted on JCO3348 Mono wheels in white or fluorescent yellow In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Tires (Pink Compound)📦 (2) JCO3348 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" Rear Buggy Wheels✅ Standard 12mm Hex Fitment

Read more less

JConcepts Mono 2.2" Rear Wheels (4) – White – Fits B7, B74.2, YZ2, YZ4, XB2, XB4, LD3, L1R Overview:The JConcepts Mono 2.2" Rear Wheels are a proven favorite in 1/10 off-road racing, known for their durability, performance, and fitment across a wide range of modern race buggies. These wheels feature a concave dish design, outer glue bead catch, and precision-molded 12mm hex to ensure proper fitment and performance on high-traction tracks. Built with durability and weight savings in mind, the Mono wheel includes tall radial outer ribs, short inner beads, and 10 internal supporting ribs for a balanced combination of strength and low rotating mass. Packaged as a set of 4 wheels, they offer excellent value for racers who go through multiple sets during testing or events. Features: Durable Mono-style design with concave face Includes 4 wheels per pack Outer glue bead catch for clean tire installs Tall outer radial ribs and shorter inner bead ribs for weight savings 10 internal support ribs for stability Two vent holes per wheel Molded in bright white or fluorescent yellow ROAR National & IFMAR World Championship approved Compatibility: ✅ Team Associated B7 / B74.2✅ Yokomo YZ2 / YZ4✅ Xray XB2 / XB4✅ Schumacher LD3 / L1R

Read more less

JConcepts Mono 2.2" "Slim" Front Wheels (Yellow, 4pcs) – 12mm Hex Overview:The JConcepts Mono 2.2" Slim Front Wheels are precision-designed for narrow front tires commonly used in carpet and Astroturf racing. Molded from durable high-impact material, these lightweight wheels offer a clean dish-style design with functional features that racers demand. The shallow 12mm hex design ensures quick, clean installs across a wide variety of 2WD buggy platforms. Whether you're mounting up on a Team Associated B6, Yokomo YZ-2, or Kyosho RB6, these wheels offer an ideal fit for tight indoor racing conditions. Each pack includes four wheels, available in fluorescent yellow for high visibility and style. Features: Slim width for narrow tire applications (carpet/Astro) Lightweight, one-piece construction Popular dish styling with vent holes Outer glue catch for cleaner tire mounting Polished face with embossed JC logo Pack of 4 wheels Available in bright white or fluorescent yellow Compatibility Includes (but not limited to): ✅ Team Associated: B7, B7D, B6, B6.1, B6.1D, B6.2, B6.2D, B5, B5M, B4 series✅ Kyosho: RB5, RB6, RB7✅ Schumacher: Cougar KF2, KF2 SE, KD, KC, LD3✅ Yokomo: YZ-2 CAL, CAL2, CAL3, DTM, DTM WC, DTM2, DTM3✅ Serpent: SRX-2 MM, RM✅ XRAY: XB2 (2017–2019 Carpet/Dirt editions)

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

Team Associated RC10B6 Factory Team Carbon Front Suspension "Gullwing" Arms [91872] 🦅 Fly through corners with precision! Upgrade your front end with Factory Team Carbon Gullwing Arms for your RC10B6! Designed with carbon fiber construction, these arms are lighter, stiffer, and stronger—giving you the edge when the track gets tough and traction is high. ✅ 12% lighter than "hard" material✅ Better cornering in high-grip conditions✅ More consistent handling and stability✅ Extreme strength and durability Includes:(2) Carbon Front Suspension Gullwing Arms 📦 Part Number: 91872🏁 Brand: Team Associated

Read more less

JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tires (2) (Pink) 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" 2WD Front Buggy Tires are high-performance pin tires built for carpet and turf racing. With a low-profile carcass, precision pin design, and optimized radius layout, these tires deliver fast transitions, increased side-bite, and excellent forward traction on high-grip surfaces. Features: ✔️ Low-profile carcass for reduced roll and quicker steering response✔️ Reverse “water tower” pin design for enhanced grip and precision✔️ Radius-positioned pin layout for maximum surface contact✔️ Alternating pin rows for optimal side-bite and traction✔️ Radial rib & angular cross tread for consistent cornering and mid-corner launch✔️ Ultra-lightweight scalloped tire beads for reduced rotating mass In The Box: 📦 (2) Fuzz Bite LP 2.2" 2WD Front Buggy Tires (Pink Compound) Compatibility: ✅ Fits 2.2" 2WD Front Buggy Wheels

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

Precision Bonding for High-Performance Tires The Team Losi Racing Thin Tire Glue is the go-to choice for RC racers and hobbyists who demand strong, reliable tire bonds. Designed with a thin viscosity for quick penetration, this CA glue creates a secure, long-lasting hold — ensuring your tires stay locked in place even under high-speed runs and intense bashing sessions. Perfect for on-road, off-road, and crawler tires, this 1oz bottle offers plenty of glue for multiple applications, making it an essential tool for your RC kit. ⚡ Key Features: ✅ Thin Viscosity CA Glue — fast-setting for deep penetration and strong bonds.✅ Ideal for Tire Gluing — perfect for foam, rubber, and RC wheel materials.✅ 1oz Bottle — enough for multiple tire sets.✅ Quick-Drying Formula — reduces wait time so you can hit the track faster.✅ Reliable Hold — designed to handle high speeds, jumps, and hard turns. 📏 Specifications: 🔹 Type: Thin Viscosity CA Glue🔹 Size: 1oz (28.3g)🔹 Use: Tire Gluing Applications 💡 Pro Tip: For best results, clean tire beads and rims before applying glue, and use a tire gluing jig for added precision.

Read more less

JConcepts Pin Swag 2WD Front – Pink Compound – Pre-Mounted on 3376 Wheels (White or Yellow)Precision Steering Meets Turf Domination! 💥 The JConcepts Pin Swag Front Tires bring aggressive traction and pinpoint control to 2WD buggies on high-grip carpet and turf. Pre-mounted on 3376 wheels and glued for out-of-the-box performance, these tires combine the proven Swagger outer lug design with a dense pin layout for unmatched front-end steering. ✨ Key Features: ✅ Pre-Mounted for Convenience – Glued and ready to race! 🔧 Pink Compound – Soft, high-traction rubber optimized for carpet & turf 🛞 Pin x Swag Hybrid Tread – Swagger-style outer lugs + crisp center pins for bite and balance 💡 Ultra-Light Scalloped Bead Design – Reduces rotating mass for faster response 🌀 Low-Profile Carcass – Faster cornering, better transition through chicanes and jumps 🎨 Available in Bright White or Fluorescent Yellow wheels 🧩 Compatibility: Fits 2WD front buggies using JConcepts 3376 wheels 📦 Includes: (2) Pre-mounted JConcepts Pin Swag Front Tires – Pink Compound (2) JConcepts 3376 Wheels (choose white or yellow) ⚠️ Note: Sold as a pair. Please verify fitment with your buggy’s wheel requirements. 🏁 Take control of the corners and push the pace with the aggressive precision of JConcepts Pin Swags!

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

Nitro Pro KS1-PRO LP Servo – High-Speed, High-Torque LCG Performance! 🔥 The Most Powerful & Fastest Low-Profile Servo Yet! 🚗💨 The Nitro Pro KS1-PRO LP Servo is designed for elite racers and high-performance RC builds, offering unmatched torque, ultra-fast response times, and exceptional durability in a low-profile, lightweight design. Featuring a patented stainless gear set, a custom CNC billet aluminum case, and a lifetime gear replacement warranty, this servo is built to handle the most demanding RC applications. 🏆 Whether you're racing on-road, off-road, or in high-speed competition events, the KS1-PRO LP Servo provides lightning-fast speed, extreme precision, and rock-solid durability. ✨ Key Features: 🔥 458 oz-in Torque & 0.068s Transit Speed – Incredible power & ultra-responsive control 🛠️ Custom CNC Billet Aluminum Case – Enhanced durability & heat dissipation ⚙️ Patented Stainless Steel Gear Set – Engineered for maximum strength & longevity 🏆 Lifetime Gear Replacement Warranty – Guaranteed durability & long-term reliability 💨 Low-Profile LCG Design – Optimized for weight balance & compact installations 📊 Specifications: Torque: 458 oz-in Speed (Transit Time): 0.068 sec Gear Set: Patented Stainless Steel Case Material: Custom CNC Billet Aluminum Warranty: Lifetime Gear Replacement 🏁 Extreme Power & Precision for High-Performance RC! 🔥 Whether you're pushing your RC car to the limits on the track or demanding top-tier performance for bashing, the Nitro Pro KS1-PRO LP Servo is the ultimate choice for high-speed, high-torque applications. 💨 Upgrade today and dominate with pro-level speed & control! 🏆🏁  

Read more less

Nitro Pro JTP RT2 LP Servo – High-Speed, High-Torque LCG Performance! 🔥 The Most Powerful & Fastest LCG Servo Yet! The Nitro Pro JTP RT2 LP Servo sets a new standard for low-profile, high-performance servos, delivering incredible torque and lightning-fast response times. Engineered with a custom CNC billet case, patented stainless gear set, and ultra-fast processing, this servo is built for durability and precision in high-speed RC racing applications. 🏆 Whether you're competing in off-road, on-road, or high-speed bashers, the JTP RT2 LP Servo provides unmatched strength, reliability, and performance. ✨ Key Features: 🔥 458 oz-in Torque & 0.068s Transit Speed – Unrivaled power & lightning-fast response 🛠️ Custom CNC Billet Aluminum Case – Provides maximum durability & heat dissipation ⚙️ Patented Stainless Gear Set – Extreme strength & precision for heavy-duty performance 🔩 Lifetime Gear Replacement Warranty – Unmatched durability & reliability 💨 Low-Profile LCG Design – Optimized for balance & fitment in tight spaces 📊 Specifications: Torque: 458 oz-in Speed (Transit Time): 0.068 sec Gear Set: Patented Stainless Steel Case: Custom CNC Billet Aluminum Warranty: Lifetime Gear Replacement 🏁 Extreme Power & Precision for High-Performance RC! 🔥 Whether you're racing at top speeds or tackling extreme terrain, the Nitro Pro JTP RT2 LP Servo delivers unparalleled torque, durability, and precision control. 💨 Upgrade today and experience pro-level performance! 🏆🏁  

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

  Nitro Pro FK-N500PRO2 – Gen 2 Speed Meets Strength 🚀 Meet the Nitro Pro FK-N500PRO2 — the next-gen 500-class servo built to dominate the track with blistering speed and unmatched reliability. Whether you're fine-tuning your steering response or demanding more from your throttle control, this servo delivers precision under pressure. 🔥 Packing ~500oz of torque at an insane 0.07 transit speed, it's a top-tier choice for racers and hardcore bashers who want nothing but the best. Wrapped in billet aluminum and loaded with upgraded internals, this servo is a compact powerhouse that performs lap after lap. ✨ Key Features: ⚡ ~500oz @ 0.07 Transit Speed – Lightning-fast response with serious pulling power🛠️ Upgraded Gear Sets & Electronics – Precision-tuned for durability and speed🏗️ Aluminum Billet Construction – Lightweight, rigid, and race-proven🧠 Brushless Motor – High-performance core for long-lasting performance💧 IP67 Waterproof – Rain? Mud? No problem. Built to survive extreme conditions🛡️ Stainless Steel Gears (316/304) – Ultra-tough, corrosion-resistant drivetrain✅ 100% Satisfaction Guarantee + 12-Month No-Hassle Warranty 📦 What’s in the Box? ✔️ (1) Nitro Pro FK-N500PRO2 Gen 2 Brushless Servo✔️ Peace of mind with industry-leading warranty and support 🚗 Built to Win – Trusted by Racers Speed, strength, and confidence — the FK-N500PRO2 gives you the edge when it matters most. Whether it’s fine control or full-send action, this servo’s got you covered. 💡 Upgrade Your Setup – Add the Nitro Pro FK-N500PRO2 to Your Build Today!

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Team Associated 12mm Big Bore V2 Machined Shock Spacers – Part 91494Precision Fit. Smooth Travel. Race-Ready Performance. The Team Associated 12mm Big Bore V2 Machined Shock Spacers (91494) are direct replacements for the RC10 B6 and B6D buggies. These machined components ensure precise shock shaft alignment and optimal sealing, helping your suspension perform consistently under race conditions. ✅ Fits RC10 B6, B6D, and other 12mm Big Bore V2 shocks✅ Machined for accuracy and long-lasting durability✅ Includes shock shaft guides and seal cartridge spacers✅ Supports four full shocks✅ Essential for maintaining smooth and consistent shock performance 📦 Includes: Complete Set of Shock Shaft Guides Seal Cartridge Spacers (for 4 shocks) Part #: 91494 💡 Pro Tip: Replacing shock spacers and guides during a rebuild helps eliminate leaks and restores full suspension responsiveness.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

Factory Team Aluminum Servo Horn – 25T / 18.5mm – Part 1363Stronger Steering. Smoother Control. The Factory Team 25T Aluminum Servo Horn (1363) is a premium upgrade for RC8B3, RC8B3e, RC8T3, and RC8T3e platforms. Machined from 7075 T6 aluminum, this horn is built to handle the demands of competitive racing. Its shorter 18.5mm length offers a smoother steering feel while reducing stress on the servo. ✅ 7075 T6 aluminum construction – lightweight and ultra-strong✅ 18.5mm length – optimized for smoother steering and less servo strain✅ Clamping design with large M2.5 screw – secure fit with reduced slop✅ Laser-etched 25T spline size – easy identification✅ Compatible with XP Digital, Reedy, Futaba, Savox, and newer Hitec servos✅ Perfect fit for RC8B3, B3e, T3, and T3e platforms 📦 Includes: (1) 25T Aluminum Clamping Servo Horn (18.5mm) (1) M2.5 Clamp Screw Part #: 1363 💡 Pro Tip: Shorter servo horns like this one help protect your servo during high-impact landings and tight cornering.

Read more less

Team Losi Racing 22 5.0 Aluminum Clamping Servo Horn (Black) (25T)PART: TLR331033 Upgrade your steering precision with the Team Losi Racing 25T Aluminum Clamping Servo Horn, designed specifically for the 22 5.0 Electric Buggy Kits. This optional servo horn is CNC-machined from lightweight aluminum for strength and reliability under high stress. Finished in black anodizing with chamfered edges, it adds a touch of style while delivering top-tier performance. The clamping design ensures a secure, tight fit to your servo. Features: Precision-machined from lightweight aluminum Durable black anodized finish with chamfered accents Clamping style for secure fitment Compatible with 25T spline servos Designed for 22 5.0 Electric Buggy Kits

Read more less

  JConcepts Swaggers 2WD Front 2.2" Carpet Tires (Pink) – Pre-Mounted on 3376 Wheels (12mm Hex)Track-Tuned Precision for High-Grip Carpet Racing! 💥 The JConcepts Swaggers are the go-to front tires for elite-level carpet and astro racing. Featuring offset angular ribs and a low-profile design, these pre-mounted tires are engineered for high-speed consistency, sharp cornering, and superior straight-line tracking. Factory-glued to slim 3376 wheels, these are ready to race right out of the package. ✨ Key Features: ✅ Pre-Mounted on JCO3376 Wheels – Plug and play with no gluing hassle! 🔧 12mm Hex Slim-Profile Front Wheels – Choose white or yellow options (JCO3376W or JCO3376Y) 🌀 Low-Profile Carcass – Enhances stability and control on high-traction tracks 🛞 Angular Rib Design – Offers superior corner speed and straight-line accuracy 🟣 Pink Compound – Medium-soft compound with great balance of grip and longevity 🧩 No Insert Required – Lightweight and ready to dominate on carpet or turf 📦 Includes: (2) Pre-mounted JConcepts Swaggers 2.2" Front Buggy Tires – Pink Compound (2) JConcepts Slim Front Wheels (White or Yellow, 12mm Hex) 🧩 Compatibility: Fits most 2WD 1/10 scale buggies with 12mm front hex and slim wheels 🏁 Turn tighter. Track straighter. Drive faster. Dominate carpet with JConcepts Swaggers!

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Team Associated Arm Mount Inserts – ASC92014🔧 Fine-Tune Your Geometry with Precision Inserts Dial in your suspension setup with these official Team Associated Arm Mount Inserts. Designed as direct replacements for the RC10 B6 and B6D platforms, this set gives you a range of tuning options to adjust toe and anti-squat settings—so you can hit your marks on any track. ✅ Factory fit for B6 & B6D vehicles✅ Adjust toe and squat for maximum cornering control✅ Durable and lightweight composite construction 📦 Includes:• (4) Inserts – 0, 0• (4) Inserts – 0, 0.35• (4) Inserts – 0, 0.7• (4) Inserts – 0.35, 0.35 🔢 Part Number: ASC92014🏁 Brand: Team Associated

Read more less

Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B7 Factory Team Carbon Front Suspension Arms (2) – Lightweight & Tuned for Performance! 🏁 Upgrade your RC10B7 with Factory Team Carbon Front Suspension Arms – precision-crafted from Team Associated’s legendary carbon composite material. These arms reduce weight, improve stiffness, and eliminate unwanted flex, making them ideal for high-traction surfaces where consistency and response are key. 🔧 Key Features: ✅ Made from AE’s carbon composite for maximum strength and minimal weight✅ Reduces flex for more consistent handling on high-bite tracks✅ Lightweight design improves agility and acceleration✅ Includes front arm spacers for easy installation and tuning✅ Factory Team performance and durability 📦 Includes: (2) Carbon Front Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 For racers chasing podium performance, carbon arms deliver unmatched precision.Dial in your front-end with Factory Team Carbon Suspension Arms! 🔧🏆

Read more less

Team Associated Gear Differential Rebuild [91463]🛠 Freshen Up Your Diff!Keep your ride dialed with the Team Associated Gear Differential Rebuild Kit, designed specifically for the optional ASC91461 gear diff. Whether you're doing routine maintenance or bringing a worn-out diff back to life, this kit has what you need to keep your buggy smooth, responsive, and race-ready. 🧰 Features:✅ Designed for the optional ASC91461 gear differential✅ Genuine Team Associated parts for perfect fit and function✅ Ideal for performance rebuilds and regular maintenance 📦 Includes:All necessary components to rebuild one gear differential 🔥 Part Number: 91463

Read more less

Team Associated RC10B6.2 Factory Team Carbon 75mm Rear Suspension Arms [91874] 💪 Lightweight. 💨 Rigid. 🏁 Race-Proven. Upgrade your RC10B6.2 with the Factory Team Carbon 75mm Rear Suspension Arms—built for racers who demand precision, strength, and speed. Crafted from ultra-rigid carbon material, these arms deliver sharper handling, improved durability, and better stability in high-traction conditions. ✅ 12% lighter than standard "hard" arms✅ Stronger and more durable than previous options✅ Improves high-speed stability and cornering control✅ Ideal for high-traction tracks✅ Direct Factory Team fit and finish Includes:(2) Carbon 75mm Rear Suspension ArmsPlastic Shims 📦 Part Number: 91874🔧 Brand: Team Associated🏎️ Compatible with: RC10B6.2

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

  Nitro Pro FK-N500FST – Blazing Speed Meets Precision Control 🏁 Introducing the Nitro Pro FK-N500FST — one of the fastest, strongest, and most advanced servos in the game. Built for racers who need absolute responsiveness without sacrificing power, this servo delivers 500oz of torque at 0.071 transit speed — an elite combo that turns milliseconds into victory. 🔥 With a patented stainless steel gear set, lifetime gear replacement, and a precision-machined billet aluminum case, this servo isn’t just fast — it’s built to outlast the competition. ✨ Key Features: ⚡ 500oz Torque @ 0.071 Transit Speed – Elite-level power and razor-sharp speed🛠️ Patented Stainless Gear Set – Exclusive design for unmatched reliability♾️ Lifetime Gear Replacement Warranty – We've got your back for the long haul🏗️ CNC Billet Aluminum Case – Lightweight, heat-resistant, and race-ready💧 IP67 Water Resistant – Track-tested, weather-approved 📦 What’s in the Box? ✔️ (1) Nitro Pro FK-N500FST High-Speed Servo✔️ Peace of mind with lifetime gear coverage Engineered for Champions – Built to Perform Whether you're chasing podiums or pushing limits, the FK-N500FST delivers the strength and speed your build demands. 💡 Dominate the Track – Make the FK-N500FST Your Next Upgrade!

Read more less