Limitless Carpet: 2WD MOD Buggy
-
Team Losi Racing 22X Pre-Cut Chassis Protective Sheet (Black) – TLR-1260
Protect your chassis and keep it looking factory fresh with the Team Losi Racing 22X Pre-Cut Chassis Protective Sheet. Designed specifically for the 22X platform, this peel-and-stick protector helps guard against scratches, scuffs, and wear from racing and practice—especially on abrasive track surfaces. Features & Benefits: Precision cut for a perfect fit on the TLR 22X chassis Durable surface protection against scrapes and wear Helps preserve chassis appearance and long-term performance Clean, professional look with official TLR branding Easy application that stays securely in place Includes: (1) 22X Pre-Cut Chassis Protective Sheet (Black) A simple upgrade that keeps your 22X protected and looking sharp race after race.
$15.99
-
Team Losi Racing 22X Top Bridge Plate & Bulkhead Set – TLR-1079
Restore strength and precision to your 22X with the Team Losi Racing Top Bridge Plate & Bulkhead Set. This genuine replacement set is designed specifically for the 22X 2WD buggy platform and is ideal for repairs, rebuilds, or keeping spares on hand. Features & Benefits: Genuine Team Losi Racing replacement components Maintains proper front-end alignment and chassis rigidity Precision-molded for correct fit and reliable performance Includes: (1) Top bridge plate (1) Bulkhead (1) Bulkhead brace Perfect for keeping your 22X dialed in and race-ready after hard racing or trackside impacts. ✅ Compatibility Losi 22X Losi 22X-T
$19.99
-
Team Associated Turnbuckles, M3x48mm / 1.89in (Part #91723)
Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.
$8.99
-
Team Associated RC10B6.3 FT Steering Block Arms, HT +1, Carbon Fiber (Part #91902)
Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.
$9.99
-
Team Associated FT 13mm Shock Pistons, 2.5mm Thick – 2x1.7mm Holes (Part #91933)
Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.
$9.99
-
XRAY Composite 3-Pad Slipper Clutch Spur Gear – 72T / 75T / 78T / 81T / 84T (48P) Product Codes: 365872 -365884
Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)
$10.35
-
XRAY XB2 Suspension Arm Front – Low Shock Mounting – Left – Short – Graphite 322127-G
Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite
$16.90
-
Team Associated RC10B6 Factory Team Laydown Gearbox & Chassis Braces (Carbon Composite) Part #: 91952
Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!
$22.94
-
TLR 22X Aluminum Gear Differential Cover – Part #: TLR-1121
Boost your 22X’s performance and durability with this CNC-machined Aluminum Gear Differential Cover from Team Losi Racing. Designed for racers who push their cars to the limit, this cover eliminates flex, protects your diff, and helps manage heat during hard off-road runs. 🔧 Features: CNC-machined aluminum for precision fit Improves heat dissipation during high-load conditions Rigid construction reduces flex and enhances handling Long-lasting protection for your gear differential Lightweight and race-tested 📦 Includes: (1) Aluminum Gear Differential Cover (1) Gasket (1) Spacer ✅ Compatibility:• Losi 22X• Losi 22X-T
$20.99
-
Team Losi Racing 22X-4 68mm CVA Driveshaft Bones (2) – TLR232103
Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!
$20.99
-
JConcepts XRAY XB2 2025 “S2” 1/10 Buggy Body (Clear) w/Two Wings (Standard or Lightweight) Part # 0685 / 0685L
Overview:The JConcepts XRAY XB2 2025 “S2” 1/10 Buggy Body delivers pro-level performance and aerodynamic precision for the latest XB2 platform. Originally designed for world-champion competition, the S2 design has become a staple for racers running low-profile setups on dirt, carpet, or turf. Precision-molded from high-quality clear polycarbonate, the S2 body features an aggressive low-drag profile with refined airflow management and enhanced downforce for stable, responsive handling.Available in both Standard (0685) and Lightweight (0685L) versions to match your preferred balance of strength and agility. About the S2 Buggy Body Streamlined Style & PerformanceThe S2 body uses computer-aided design to achieve symmetry, precision, and consistent airflow. Its low-profile cab, recessed hood, and dual window design enhance cooling and responsiveness, while the integrated center fin improves high-speed stability. Sidepod scoops can be trimmed to tune downforce or airflow, and the body wraps snugly around the XRAY spur-gear guard for a perfect fit. Each kit includes two 6.5" wings, making it a versatile choice across all surface types. Features Aerodynamic low-profile shape reduces drag and boosts corner speed Dual-window cab and recessed hood for improved airflow and cooling Rear sidepod scoops for customizable downforce or airflow tuning Stabilizing center fin and reinforced side rails for durability Perfect fit around XRAY spur-gear guard Includes two 6.5” wings for multi-surface versatility Available in Standard and Lightweight options Includes (1) XRAY XB2 2025 “S2” 1/10 Buggy Body (choose Standard or Lightweight) (2) Wings (1) Decal Sheet (1) Window Masking Sheet Compatibility XRAY XB2 2025 Tech Note: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
$31.99
-
Team Losi Racing Upper Shock Bushing Set (4) – TLR5092
Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.
$7.99
-
Team Associated 13mm Front Shock Spring (Yellow/3.8lbs) (44mm)
Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes Shock Spring Characteristic Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
$9.99
-
Team Associated Rear Suspension Arms: RC10B74
Team Associated Rear Suspension Arms: RC10B74 ASC92130
$12.99
-
Team Associated RC10B7 Factory Team Carbon Side Rails (2)
Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D
$18.99
-
Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474
Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁
-
Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – 91620
Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!
$16.99
-
Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°)
Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.
$24.99
-
JConcepts P2 RC10B7 Clear Body w/ Wings (Standard Weight) - JCO0616
JConcepts P2 RC10B7 Clear Body w/ Wings (Standard Weight)📦 Includes Two Carpet / Turf / Dirt Wings The JConcepts P2 body delivers high-performance styling and handling to your Team Associated RC10B7. With aggressive cab positioning, precision aero features, and championship-inspired design, the P2 is built for racers who demand speed, stability, and control on any surface—carpet, turf, or dirt. 🔧 Features: 🔹 Designed for Team Associated RC10B7 / B7D 🔹 Original JConcepts P2 low-profile design 🔹 Tight chassis-hugging profile with slim nose fit 🔹 Front deflection shield at windshield base for airflow control 🔹 Aggressive forward cab and full-length center stabilizer fin 🔹 Rear winglets improve forward tracking and cornering stability 🔹 Dual-window cab layout for a heritage look 🔹 Spur gear guard coverage built into the rear section 🔹 Durable clear polycarbonate (standard weight) 🔹 Advanced chamfering and aerodynamic shaping 🔹 Broad rear mounting ledge for a secure fit 🔹 Includes window masks & JConcepts decal sheet 🏁 Includes: (1) P2 Clear Body (Standard Thickness) (2) 6.5" Carpet / Turf / Dirt Wings (1) Window Mask Set (1) JConcepts Decal Sheet 🛠️ Body arrives clear and untrimmed. Compatible with RC10B7 and RC10B7D chassis.
$31.99
-
JConcepts Pin Downs Carpet 2.2" Rear Buggy Tires (2) (Pink) JCO3136-010
JConcepts Pin Downs Carpet 2.2" Rear Buggy Tires feature a pin spiked tread, which is directional for added performance and stability. The directional nature of the pins were positioned to allow broken-in type pins to grip the surface in one direction, while the pins are more upright when oriented in the opposite direction. The tire carcass is marked with a special texture which helps the driver with orientation during mounting. The bottoms of the pins have heavy radiuses which allow the pins to wear more consistently and not tear or rip off the carcass prematurely.The tire carcass itself has been refined to reduce weight while maintaining strong sidewall support. The pink compound marked with 2 pink dots on the tire represents a new compound for JConcepts, a medium soft material with good wear characteristics. The rear tires include gray, open cell inserts making them a complete set ready to mount, straight out of the package. The Pin Downs work best on Carpet and Astroturf tracks where typically a small pin tire is working. Mounting Tip: The JConcepts team drivers have been running the rear Pin Downs with the larger band mounted on the outside.Features: JConcepts fit, finish and design Multi-position, directional sharp pins Hefty pin to carcass radius for increased response Textured tire carcass indicates direction Carefully shaped profiled carcass for rolling speed Includes gray, open cell inserts Pink Medium Soft compound, developed for carpet and astro tracks
$10.00
-
ProTek RC Flat Sensor Wire (150mm) (PTK-2119)
🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups
$5.99
-
Team Associated RC10B7.1 Front Suspension Arms (2) – 92574
The Team Associated RC10B7.1 Front Suspension Arms (92574) are precision replacement components designed to maintain accurate steering response and predictable handling on the track. These arms play a critical role in supporting consistent front-end geometry, helping drivers maintain control through technical sections and high-speed corners. Engineered specifically for the RC10B7.1 platform, these suspension arms integrate seamlessly with the chassis to deliver reliable performance under competitive racing conditions. Their purpose-built design ensures dependable durability and precise fitment, making them essential for keeping your buggy performing at its best. Features• Optimized steering geometry for improved front-end response• Race-tuned handling balance for consistent performance• Platform-specific design for RC10B7.1• Precision manufacturing for a perfect fit and reliable operation Includes• (1) Left RC10B7.1 Front Suspension Arm• (1) Right RC10B7.1 Front Suspension Arm
$11.99
-
Team Losi Racing Shock Tower Guards, Upper Wing Mount & Spur Shield 22X TLR-1104
Protect critical components on your buggy with the Team Losi Racing Shock Tower Guards, Upper Wing Mount, and Spur Shield Set. Designed specifically for the TLR 22X platform, this set helps shield the shock tower, wing mount area, and spur gear from debris and impact damage during racing. Ideal for maintaining durability and reliability over long race days, these guards help extend component life while keeping your drivetrain and suspension protected in demanding track conditions. Features: Protects shock tower and upper wing mount Integrated spur gear shielding Helps prevent damage from debris and impacts Designed for race-level durability Compatibility: Team Losi Racing 22X Includes: Shock Tower Guards Upper Wing Mount Protection Spur Shield Part Number: TLR-1104
$8.99
-
Team Losi Racing 22X AC Narrow Caster Blocks (2) – TLR-1098
Keep your front suspension tight and precise with the Team Losi Racing 22X AC Narrow Caster Blocks. These genuine replacement parts are designed specifically for the 22X AC 2WD buggy platform and are ideal for repairs, rebuilds, or keeping spares in your pit box. Features & Benefits: Genuine Team Losi Racing replacement components Narrow caster block design for proper 22X AC front-end geometry Precision molded for consistent fit and smooth steering action Compatibility: Team Losi Racing 22X AC 2WD Buggy Includes: (2) Narrow caster blocks Perfect for maintaining factory handling and reliability on your 22X AC.
$8.99
-
JConcepts TLR 22X “F2” 1/10 Buggy Body w/Aero Wing (Clear) 0707 (Standard) | 0707L (Lightweight)
The F2 body from JConcepts brings IFMAR World Championship–winning design to the Losi 22X platform. Precision-engineered for a tight, clean fit, the F2 slides perfectly over the top deck and under the front shock tower, delivering race-proven aerodynamics and durability across dirt, carpet, and turf. About the F2 Buggy Body Proven Design & Advanced FeaturesThe aggressive, forward-biased cab improves steering response and adaptability on changing surfaces. A louvered roof with the Finnisher “V” profile enhances airflow and stability, while chamfered side-pods blend seamlessly into the cab for reduced drag. Extra rear windows add style, and reinforced spur-gear guard coverage with added clearance helps absorb impacts. Choose Standard or Lightweight thickness to match track conditions and durability needs. Features Proven F2 design from IFMAR World Championship lineage Forward-positioned cab with steep windshield for multi-surface control Tight chassis-outline fit for secure, clean mounting Louvered roof & Finnisher “V” for improved airflow and stability Double-step side-pods and roof for standout styling Reinforced spur-gear guard coverage with added clearance Includes (1) TLR 22X “F2” 1/10 Buggy Body (Clear) — Standard (0707) or Lightweight (0707L) (2) 6.5" Wings (carpet/turf/dirt) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.
$31.99
-
Limitless RC Shock Tower Protectors Rear ONLY- 1 PC
Limitless RC rear shock tower protector, supplied as one piece. Rear only; select the vehicle-specific option that matches your model.
$7.99
-
Team Losi Racing 22X Bulkhead & Kick Shims Set TLR-1075
The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T
$10.99
-
Team Exalt 2S Specialized Bullet ProCharge Cable (4mm to 5mm) – EXAS4000
Clean Power. Pro-Level Charging. Simplify your pit setup and maximize efficiency with the Team Exalt 2S Specialized Bullet ProCharge Cable. Built for serious racers and hobbyists alike, this precision-crafted cable delivers a neat, reliable, and safe connection for 2S LiPo battery charging — combining high-quality materials with professional-grade durability. Pro-Grade Construction Each ProCharge cable is hand-assembled with 12AWG main charge leads and 18AWG balance leads, paired with 4mm bullet charger connectors and 5mm battery bullet plugs for low-resistance, high-efficiency power delivery. The braided PET sleeve and self-sealing shrink tubing keep your setup organized and protected, ensuring performance that looks as good as it runs. Features: Custom 2S ProCharge cable designed for 4mm charger to 5mm battery bullets 12AWG charge leads and 18AWG balance leads for consistent current flow 2mm balance plug to 3-pin XH connector for standard 2S LiPo compatibility Braided PET sleeve for a clean, organized look Self-sealing shrink tube for a secure, durable finish Reduces pit clutter while maintaining professional-grade reliability Safe, efficient, and visually clean charging solution Specifications: Spec Detail Charger Connector 4mm Bullet Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt 2S Specialized Bullet ProCharge Cable Team Exalt — Sleek Design. Solid Power. Perfect Connection.
$38.49
-
Team Associated RC10B7 Aluminum Arm Mount "D Block" (92433)
Overview:Upgrade your suspension durability and precision with the Team Associated RC10B7 Aluminum Arm Mount "D Block". Machined from high-quality aluminum, this mount improves rigidity in the rear suspension assembly, keeping your hinge pins firmly aligned under heavy loads. It’s a race-proven upgrade that enhances consistency, handling, and longevity compared to the stock composite part. Features: CNC-machined aluminum construction for superior strength Maintains precise hinge pin alignment for consistent handling Blue anodized finish for durability and Factory Team looks Direct replacement upgrade for the stock “D Block” Genuine Team Associated Factory Team component Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (check manual for details) Includes: (1) Aluminum Arm Mount "D Block" Part Number: 92433 ⚡ Pro Tip: Combine the Aluminum Arm Mount "D Block" with the B7 Factory Team Arm Mount Inserts (92434) to unlock fine-tuned rear suspension geometry options.
$17.99
-
Reedy Flat Sensor Wire (110mm) 979
This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.
$9.99
-
Team Associated 13mm Rear Shock Spring (Grey/2.01lbs) (61mm)
Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes Shock Spring Characteristic Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
$9.99
-
Team Associated RC10B7 Anti-Roll Sway Bar Aluminum Ball Joints (4) [92457]
Team Associated RC10B7 Anti-Roll Sway Bar Aluminum Ball Joints (4) [92457] 🔩 Lock In Precision. Race with Confidence.Dial in your sway bar setup like a pro with the Team Associated RC10B7 Aluminum Ball Joints! These high-quality replacements offer tighter tolerances and stronger durability than stock plastic—keeping your sway bar action smooth and consistent under load. Whether you're rebuilding or upgrading, these are a must-have for your B7 or B7D buggy. 💪 Why You Need These:✅ CNC aluminum construction for added strength🎯 Perfect fit for RC10B7 and RC10B7D sway bar systems🔧 Includes set screws for secure installation🏁 Keeps sway bar action tight and responsive 📦 Includes:(4) Aluminum Ball Joints(4) Set Screws 🔩 Part Number: 92457🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D
$13.75
-
Team Associated RC10B7.1 Caster & Steering Blocks Set – 92576
The Team Associated B7.1 Caster & Steering Blocks Set (92576) is a replacement set designed to restore precise steering performance and front suspension geometry on the RC10B7.1 platform. Perfect for maintenance, rebuilds, or race prep, this set ensures your buggy maintains accurate handling and consistent performance on the track. With multiple steering block options included, racers can fine-tune kingpin inclination (KPI) and steering characteristics to match track conditions and driving preferences. Features• Genuine Team Associated replacement parts• Restores precise steering and suspension performance• Multiple KPI steering block options for tuning• Helps maintain consistent handling and control• Designed specifically for the B7.1 platform Includes• (2) Caster Blocks• (2) 4L/R Steering Blocks (KPI0)• (2) 4L/R Steering Blocks (KPI2)• (2) 3L/R Steering Blocks (KPI0)• (2) 3L/R Steering Blocks (KPI2)
$17.99
-
Sticky Kicks RC Five Star Ceramic Bearing Sets 2WD
Sticky Kicks RC is proud to introduce the Five Star Ceramic Bearing Sets, engineered for racers who want maximum efficiency, speed, and consistency in their 1/10 scale 2WD cars. If keeping your bearing game #superdialed matters, this is the upgrade. Built with Grade 5 ceramic components and designed to minimize resistance, these bearings deliver ultra-smooth rotation, quicker acceleration, and improved overall drivetrain efficiency—exactly what competitive racers demand. Product Details Designed for 1/10 scale 2WD racing cars Fits current Team Associated, Losi, and X-Ray platforms Lowest resistance, fastest rolling bearings available Grade 5 ceramic construction Extremely lightweight for reduced rotating mass Ideal for high-performance racing and rebuilds A premium ceramic bearing upgrade for racers chasing every last bit of speed and smoothness. 🏁
$79.99 - $84.99
-
1up Racing Pro Duty Titanium Turnbuckle Set – AE RC10B7.1 – 1UP-74911B
The 1up Racing Pro Duty Titanium Turnbuckle Set is engineered specifically for the RC10B7.1, delivering maximum strength with massive weight savings. These turnbuckles weigh ~45% less than steel while maintaining exceptional durability for the most demanding racing conditions. Manufactured from precision-ground centerless 6AL4V Titanium bar stock using Swiss-style CNC screw machines with live tooling and thread rolling, these turnbuckles set a new standard in quality and performance. Each piece features the 1up arrow laser-engraved on all four sides of the center lug for unmistakable authenticity. Key Benefits Roughly 45% lighter than steel turnbuckles Increased strength and durability Improves overall vehicle efficiency and response Designed specifically for the B7.1 platform Features Precision 6AL4V Titanium construction Swiss-style CNC machining with rolled threads Laser-engraved 1up arrow on all four sides Pro-level performance and finish Backed by the 1up Racing Pro Duty Guarantee Includes (6) Pro Duty Titanium Turnbuckles Raw Titanium finish (standard) Finish Options (Optional) Raw Titanium Blue (+$10) Bronze (+$10) Gold (+$10) Pink (+$10) Installation Notes Use 1up Racing 3.2mm Pro Double-Ended Turnbuckle Wrench Apply a small amount of 1up Racing Gold AW Grease to threads before installation for smooth adjustment Fitment Team Associated RC10B7.1 A premium upgrade for racers who want lighter weight, maximum strength, and precision you can feel on the track. 🏁
-
Vision Racing (VR) TLR 22X & 22X-T Minus One C-Block – 00486
Fine-tune your front-end geometry with the Vision Racing (VR) Minus One C-Block, designed for racers who want maximum adjustability and precision from their TLR 22X and 22X-T platforms. This C-block removes 1 degree of toe-out per side, allowing setups all the way down to 0° total toe. It’s an ideal option for high-grip tracks or drivers looking to calm initial steering while maintaining consistency and control. Features & Benefits: Removes 1° of toe-out per side Allows setup down to 0° total front toe Expands front-end tuning range Precision-machined for accurate geometry Race-focused design for consistent handling Compatibility: TLR 22X AC TLR 22X DC TLR 22X-T Includes: (1) Vision Racing Minus One C-Block A must-have tuning option for drivers looking to dial in front-end feel and unlock additional setup flexibility on the 22X platform. Includes: (1) Vision Racing Carbon Front Pivot Brace A smart performance upgrade for racers looking to tighten up front suspension action and maintain precise geometry throughout a race.
$18.00