Upgrade or refresh your RC10B7’s steering and suspension with this genuine Team Associated rod end set. Designed specifically for the Team Associated RC10B7 1/10 buggy, these rod ends deliver the precision fit, smooth articulation, and durability you need to keep your buggy performing at its best. 📦 Includes: (16) Rod Ends 🔧 Compatibility: Team Associated RC10B7 1/10 Buggy 💡 Perfect for replacing worn or damaged rod ends to restore crisp steering response and suspension performance.

Read more less

Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm) – Precision Rear Geometry Upgrade 🔧 Fine-tune your rear suspension geometry with the Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm). These mounts offer a +1mm vertical adjustment to the hub link position, helping you dial in rear traction and handling response. Built from lightweight aluminum for durability and performance, they’re a great replacement or upgrade for your RC10B7 or RC10B7D. 🔧 Key Features: ✅ CNC-machined aluminum construction for strength and precision✅ +1mm hub link height adjustment for fine-tuned handling✅ Direct replacement for stock hub link mounts✅ Easy installation for race-day tuning 📦 Includes: (2) Aluminum Hub Link Mounts (+1mm) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Enhance your rear suspension setup with lightweight adjustability.Upgrade to these +1mm aluminum hub link mounts and take control of your rear-end feel! 🏁

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your B7’s steering and camber system with the JConcepts Fin Titanium Turnbuckle Set. Crafted from lightweight yet strong titanium, these turnbuckles are built for serious performance. Featuring the signature “Fin” styling and a sleek anodized finish in burnt blue or black, they reduce weight, improve durability, and add a premium touch. Left-hand threads are conveniently marked for easy tuning. Features:• The ultimate performance upgrade for RC10B7 platforms• Signature JConcepts “Fin” design with sleek tapered profile• Machined from high-grade titanium• 3.5mm thread base for compatibility with ASC92308 ball cups• Clearly marked left- and right-hand threads• Anodized finish available in burnt blue or black Includes:(6) Titanium Turnbuckles – fits RC10B7 and B7D platforms

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 13mm Shock Spring Cup Set [91966] 🌀 Fine-Tune Your Ride Height in Seconds! Dial in your suspension setup with this 13mm Shock Spring Cup Set from Team Associated. Whether you're going low or keeping it high, this kit includes 0mm, 5mm, and 9mm cups—giving you full control over ride height and spring preload. 🛠️ ✅ Fits 13mm shocks✅ Includes 0mm, 5mm, and 9mm cups✅ Perfect for on-the-fly tuning✅ Durable and precision-molded Includes:(4) 0mm Spring Cups(4) 5mm Spring Cups(4) 9mm Spring Cups 📦 Part Number: 91966🚗 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B7 Top Plate & Ballstud Mount Set. This replacement set is intended for the Team Associated RC10B7 1/10 buggy. Package includes one top plate and one ballstud mount. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

1up Racing Red CV Joint Oil – Smoother, Faster, Cleaner ⚙️ Looking for max performance and zero compromise? 1up Red CV Joint Oil is the top choice for racers demanding ultra-smooth suspension and long-lasting protection. Trusted worldwide, this ultra-slick formula keeps your drivetrain buttery-smooth while repelling dirt and debris like a champ. 💡 Whether you're rebuilding for race day or tuning your rig for fun, Red is the upgrade your CV joints and universals deserve. ✨ Key Features: 🧴 Leakproof 8ml Bottle – Take it anywhere, worry-free🧲 Stainless Needle Tip – Pinpoint accuracy with every drop🔐 Childproof Cap – Safety-first, pit-friendly packaging🔴 Engineered for CV Joints & Universals – Extreme performance and longevity🧼 Slick, Clean Finish – Repels dirt and dust for clean, efficient operation🌍 Proven Worldwide – Trusted by top racers across the globe 💡 Join the movement – experience the power of Red today!  

Read more less

Pro-Motion Viper 2.2" Slim 2WD Front Pre-Mount LP Carpet Buggy Tires (2) — C3 Green (Medium Compound, White Wheels)Part #: 3070-C3-W Race-Ready Precision. Built-In Speed. The Pro-Motion Viper Slim Pre-Mounts are made for the front of 2WD 1/10 buggies, combining speed, control, and convenience. Featuring a low-profile carcass and advanced directional tread pattern, these C3 Green medium compound tires offer balanced front-end grip and stability—ideal for clean, high-traction carpet or turf tracks. Pre-mounted on white wheels so you can hit the track faster and focus on winning. ✅ Pre-mounted on durable white wheels✅ C3 Green medium compound for consistent front traction✅ Slim profile for 2WD front buggy setups✅ Low-profile sidewall for sharper steering and reduced flex✅ Directional tapered pin tread for tuning potential 📦 Includes:(2) Viper 2.2" Slim 2WD Front Pre-Mount Tires (White Wheels) 💡 Pro Tip: Pair with matching C3 rears for optimal balance and predictable cornering.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Pro-Motion 2.2" 2WD Front Slim Carpet Buggy Wheels (4)Available in Yellow (3080-Y) or White (3070-W) Precision on the Carpet. Built for Grip. Dial in your buggy for high-traction carpet tracks with Pro-Motion’s 2.2" Slim Front Wheels. These lightweight wheels are engineered with a reinforced inner rib design to reduce flex without adding unnecessary weight. The tough plastic construction holds up under pressure, while integrated vent holes keep performance sharp through long mains. ✅ Perfect fit for 2WD front carpet setups✅ Slim profile design tailored for high-grip surfaces✅ Ultra-lightweight ribbed structure for strength without bulk✅ Built-in vent holes reduce tire ballooning✅ Available in bright Fluorescent Yellow or Clean White✅ Includes 12mm hex mounting 📦 Includes:(4) 2.2" Slim Front Carpet Buggy Wheels (choose Yellow or White) 💡 Pro Tip: Pair with low-profile carpet tires for the ultimate precision and responsiveness on tight indoor layouts.

Read more less

Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁  

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision! 🔥  

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

⚡ Hobbywing XR10 Pro G3X Stock Spec 160A Sensored ESC – Titanium Grey 🏁 Premium Stock-Class ESC for Competitive 1/10 Racing! 🔥 Engineered for top-level stock racing, the Hobbywing XR10 Pro G3X Stock Spec ESC delivers ultra-efficient power, rock-solid reliability, and elite tuning control. Designed with Hobbywing's proprietary trade secret technology, this ESC handles extreme current loads with minimal heat, ensuring consistent, winning performance lap after lap. ✨ Key Features: ⚡ 160A Continuous Current – High-output ESC built for 1/10 Stock-Class domination🧊 Trade Secret Technology – Reduces heat generation and boosts electrical efficiency🎛️ 3 Customizable Racing Profiles – Fine-tune settings for track-specific control🔁 Variable Frequency PWM & Brake Control – Refined throttle and braking precision📊 Built-In Data Logging – Monitor key performance metrics via OTA or LCD box🚗 Disc Brake Mode – For tighter, more aggressive braking response🧠 Softening Function – Smoother throttle ramping and enhanced control🔐 Full Suite of Protections – Low-voltage, ESC temp, motor temp, fail-safe signal loss📦 Includes Internal & External Switch Options for flexible installs 📦 What’s in the Box? ✔️ (1) Hobbywing XR10 Pro G3X Stock Spec 160A ESC✔️ (1) Cooling Fan✔️ Factory Decals & Accessories✔️ Product Manual 📊 Specifications: Application: 1/10 Stock Racing (Off-Road, On-Road, F1, Drift, Rally) Motor Type: Sensored & Sensorless Brushless Input Voltage: 2S LiPo Only Continuous Current: 160A Peak Current: 1200A Dimensions: 35 x 33.6 x 30.3mm Weight: 101.5g BEC Voltage: 5V–7.4V Adjustable BEC Current: 5A Continuous Motor Limit: 540-Size (3650) Motor Programmable: Yes (via optional OTA Module or LCD Program Box Pro) Connectors: Solder Tabs (Motor & Battery) ⚠️ Important Tech Notes: 🔧 Programmer Required for data logging:Use Hobbywing OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) 🛑 No Reverse Polarity Protection: Reversing battery connections will damage the ESC. Double-check wiring before powering on. 🏆 Trusted by Champions — Built for Winners Whether you're racing 1/10 buggy, touring, drift, or F1, the XR10 Pro G3X Stock Spec gives you the smooth throttle feel, braking confidence, and tuning options needed to take the top step of the podium. 💨 Unlock your potential. Run the ESC the pros trust.  

Read more less

JConcepts P2 RC10B7 Clear Body w/ Wings (Standard Weight)📦 Includes Two Carpet / Turf / Dirt Wings The JConcepts P2 body delivers high-performance styling and handling to your Team Associated RC10B7. With aggressive cab positioning, precision aero features, and championship-inspired design, the P2 is built for racers who demand speed, stability, and control on any surface—carpet, turf, or dirt. 🔧 Features: 🔹 Designed for Team Associated RC10B7 / B7D 🔹 Original JConcepts P2 low-profile design 🔹 Tight chassis-hugging profile with slim nose fit 🔹 Front deflection shield at windshield base for airflow control 🔹 Aggressive forward cab and full-length center stabilizer fin 🔹 Rear winglets improve forward tracking and cornering stability 🔹 Dual-window cab layout for a heritage look 🔹 Spur gear guard coverage built into the rear section 🔹 Durable clear polycarbonate (standard weight) 🔹 Advanced chamfering and aerodynamic shaping 🔹 Broad rear mounting ledge for a secure fit 🔹 Includes window masks & JConcepts decal sheet 🏁 Includes: (1) P2 Clear Body (Standard Thickness) (2) 6.5" Carpet / Turf / Dirt Wings (1) Window Mask Set (1) JConcepts Decal Sheet 🛠️ Body arrives clear and untrimmed. Compatible with RC10B7 and RC10B7D chassis.

Read more less

🛠️ Mugen Seiki MSB1 1/10 2WD Buggy Rear Lower Suspension Arms (2) Factory Replacement Parts – Keep Your Rear End Dialed In Restore the handling, durability, and precision of your Mugen MSB1 with these genuine Mugen Seiki Rear Lower Suspension Arms. Designed as a direct replacement, these arms are engineered for a perfect fit and factory-spec performance on your 1/10 2WD buggy. 🔧 Arm Overview: ✅ Direct Replacement for the rear lower suspension arms ✅ Precision Molded for strength, balance, and flex tuning ✅ Restores Handling & Suspension Geometry ✅ Essential for Repairs, Spares, or Routine Maintenance 📦 Includes: (2) Rear Lower Suspension Arms 🔄 Compatibility: ✅ Mugen Seiki MSB1 1/10 2WD Buggy 🛒 Add to Cart now and stay race-ready with the right spares in your pit box.  

Read more less

🏁 Mugen Seiki MSB1 1/10 2WD Electric Racing Buggy Kit – Gear Differential Engineered for Precision. Built for the Podium. Introducing the MSB1 1/10 2WD Electric Buggy Kit from Mugen Seiki—a long-awaited, high-performance entry into the 1/10 off-road race scene from one of the most iconic names in RC racing. This is not your average 2WD buggy—this is Mugen performance, finally in 1/10 scale. 💡 Innovation Meets Domination: 🔧 Gear or Ball Differential Options – Choose the diff that fits your track and style ⚙️ Supreme Weight Balance & Chassis Layout – For consistent, predictable control 💥 Hard-Coated 13mm Big Bore Shocks – Super smooth landings & bump absorption 🦅 Adjustable Rear Shock Mounts – Gull wing configuration ready ⚖️ Adjustable Differential Height – Dial in traction and squat like a pro 🔩 Machined Carbon Fiber Shock Towers – Lightweight, rigid, and tunable 🧱 Heavy-Duty Molded Suspension Arms – Grip + durability in any condition 🌀 Anti-Roll Sway Bars w/ Aluminum Collars – Keep it flat, fast, and race-ready 🔧 Heavy-Duty Adjustable Turnbuckles – Front and rear, race-tough tested 🪶 CNC-Machined Aluminum Chassis – Featherweight with a curved departure angle 📦 What's in the Box: ✅ (1) Mugen Seiki MSB1 1/10 2WD Electric Buggy Kit (Unassembled)📌 Note: Finished model shown is for reference only. Electronics and accessories sold separately. 🔋 You Will Need to Complete: (1) 1:10 Scale Electric Motor (1) ESC (Electronic Speed Controller) (1) 2-Channel Surface Radio System (Transmitter & Receiver) (1) Low Profile Steering Servo (1) 7.4V–7.6V 2S LiPo Battery (Shorty Pack Dimensions) (1) Compatible LiPo Battery Charger (1) Set of Wheels & Tires (compatible with 1/10 2WD buggies) (1) Set of Polycarbonate Body Paint Tools for assembly 📊 Technical Specs: Scale: 1/10 Drive: 2WD Power Source: Electric Input Voltage: 7.4V–7.6V (2S LiPo) Completion Level: Kit (Unassembled) 🔧 Build the Buggy. Rule the Mains. Whether you're entering the 1/10 scene or upgrading your rig, the Mugen MSB1 is here to raise the bar. Built from the ground up with tunability and durability in mind, this is the platform that lets you build your advantage from the first screw to the final lap. 🛒 Add to Cart now and start building your championship buggy today.  

Read more less