Reedy Flat Sensor Wire (150mm) – ASC980Keep your electronics tidy and your setup dialed with this Reedy Flat Sensor Wire. Originally included with Reedy Sonic motors, these high-quality flat wires are now available separately to fit your custom build needs. The flat design not only looks sleek but also makes routing easier and cleaner in tight spaces. Ideal for both 1/10 and 1/8 scale applications. 📏 Length: 150mm💡 Available in sizes from 70mm to 270mm ✅ Perfect for: Cleaner wiring layout Reedy Sonic motors and other ROAR-approved ESC/motor combos OEM Part #: ASC96980

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

Upgrade your drivetrain with Team Associated Factory Team Bearings — precision 10x15x4mm bearings designed to reduce friction, smooth out rotation, and improve overall performance. Featuring the signature blue shield for easy identification, these premium bearings deliver tighter tolerances and longer-lasting durability compared to stock components. Perfect for restoring worn-out bearing sets or boosting efficiency in your B5M, Apex, Prolite 4x4, ProRally, MGT 3.0, and many more platforms using 10x15x4mm bearings. Features: Premium Factory Team–grade precision bearings Blue-shielded on one side for quick identification Reduces friction and slop for smoother drivetrain operation Ideal upgrade or replacement for worn bearings Compatible with multiple Team Associated platforms Includes: (4) 10x15x4mm Factory Team Bearings

Read more less

Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.

Read more less

The Team Associated RC10B74 Front Suspension Arm Set is a genuine OEM replacement designed to restore the handling and durability of your buggy. Precision-molded from high-quality composite, these arms are built to withstand the demands of competitive racing. ✅ Durable Composite Construction – Strong and lightweight for racing performance✅ Direct OEM Replacement – Genuine Team Associated parts for perfect fit✅ Precision Fitment – Maintains proper suspension geometry and handling Includes: (1) Front Suspension Arm Set (left & right) Compatibility: Team Associated RC10B74 series buggies (RC10B74, B74.1, B74.1D, B74.2, B74.2D) Check your manual for exact fitment Part #: 92128

Read more less

Reedy Blackbox 610R 2S Competition ESC – ASC27016Unleash precision, power, and full control with the Reedy Blackbox 610R — Reedy’s most advanced 1/10 scale ESC yet. Built on the trusted legacy of the 510R, the 610R pushes the limits with updated 32-bit hardware, lightning-fast throttle response, and unmatched tuning capability. Whether you're running stock or modified 1/10 scale setups, this ESC delivers championship-winning performance in both on-road and off-road racing. Pair it with the optional Blackbox PROgrammer2 (not included) to unlock full customization and data logging. 🔧 Key Features: CNC-machined black aluminum case with integrated heat sink Fully adjustable brake, throttle, power, and safety functions Blinky mode with ROAR-approved software 32-bit MCU for ultra-fast response Precision throttle & brake control Ultra-low resistance FET board On-board power button Optional external fan ready Pro external capacitor board Firmware updateable (with PROgrammer2) 🧠 Advanced Tuning (with Blackbox PROgrammer2 – ASC27027): Brake Settings: Strength, frequency, drag brake, punch, dynamic drag Throttle Control: Drive frequency, current limit, punch, deadband Power Delivery: Boost and top speed timing, standard & expert modes Misc. Settings: BEC voltage, temp cutoff, rotation direction, mode switching Note: Requires firmware version EE460139 on the Programmer. Already installed if purchased as the 610R/Programmer combo (ASC27017). 📦 Specs: Voltage Input: 2S LiPo Suggested Use: 1/10 Off-Road & On-Road Resistance: 0.00043 ohms Continuous Current: 160A Motor Limit: 4.5T Dimensions: 38.5 x 36.9 x 19.5mm Weight (no wires/fan): 45g BEC Output: 6.0–7.4V / 5A Power Wires: 13-gauge silicone Fan: Optional (not included)

Read more less

Refresh your suspension performance with the Team Associated B6.1/B6.1D Shock Caps & Spring Cups Set — the exact replacement parts included with the original B6.1 and B6.1D kits. This kit restores smooth, consistent shock action and leak-free performance with all-new caps, spring cups, o-rings, and bleeder screws. Perfect for maintenance, rebuilds, or keeping spares ready in your pit bag. Features Genuine Team Associated replacement parts Includes shock caps, spring cups, o-rings, and bleeder screws Restores smooth shock operation Direct fit with no modifications required Compatible Models RC10B6.1 RC10B6.1 Factory Lite RC10B6.1D RC10B6.2 RC10B6.2D RC10B6.3 RC10B6.3D RC10 B74 RC10 B74.1 RC10 B74.1D RC10 SC6.1 RC10 SC6.2 RC10 T6.2 Includes (4) Shock Caps (4) Spring Cups (4) O-Rings (4) Shock Cap Bleeder Screws

Read more less

Overview:Dial in your carpet racing performance with the JConcepts Fuzz Bite LP Carpet Front Tires. Designed specifically for 1/10 scale 4WD buggies, these low-profile (LP) tires feature a finely spaced pin pattern optimized for today’s high-traction carpet tracks. The Pink compound provides maximum grip and consistency, making these tires the go-to choice for competitive indoor racing. Features: 2.2” low-profile front tires for 1/10 4WD buggies Optimized pin-style tread for high-grip carpet surfaces Molded in Pink (medium) compound for balanced grip and wear Designed for precision steering response and forward bite Genuine JConcepts racing product Compatibility: Fits all standard 2.2” 1/10 scale 4WD buggy front wheels Perfect for modern carpet racing applications Includes: (2) Fuzz Bite LP Carpet 2.2" 1/10 4WD Buggy Front Tires (Pink Compound) Part Number: 3108-010 ⚡ Pro Tip: Pair these with JConcepts LP rear tires for a perfectly balanced setup on carpet tracks, and always break them in lightly for maximum consistency on race day.  

Read more less

Lightweight. Grippy. Colorful. Affordable. Upgrade your wheels without draining your wallet! BOOF RC M4 Flange Lock Nuts deliver rock-solid wheel security with a lightweight, race-ready design — perfect for high-grip tracks, brutal bashing sessions, and everything in between. Precision machined from high-quality aluminum and finished in bold anodized colors, these nuts keep your wheels locked down tight while adding a clean, custom look to your ride. Engineered for strong bite and consistent performance, so you stay focused on driving — not chasing wheels across the track. Key Features: ✅ Lightweight Aluminum Construction – Reduce rotating mass, increase performance.✅ Serrated Flange Design – Bites into the wheel for improved grip and security.✅ Low-Profile, Race-Ready Shape – Clean look that stays clear of obstacles.✅ 7mm Hex & M4 Thread – Fits most 1/10 scale vehicles (buggy, truck, touring, drift, etc.).✅ Vibrant Anodized Colors – Customize your setup with bold, high-contrast hardware.✅ Engineered for Everyday Abuse – Strong bite without stripping or backing off. Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) Includes: (4) BOOF RC Aluminum M4 Flange Lock Nuts Perfect For: 1/10 Off-Road Racing Drift builds Street bashers Scale and comp crawlers Touring cars Track cars Whether you're racing, drifting, or crawling — these nuts keep your wheels firmly planted and looking sharp. BOOF RC: Premium Parts. Not Premium Prices. We don’t pretend our hardware is magic — just solid, race-worthy gear at a price that makes sense.Spend less on nuts, more on tires and track time. 🏁 🔥 Lock it down. Stand out. Go race. Grab a set of BOOF M4 Lock Nuts today and give your ride some BOOF-grade hardware swagger!

Read more less

Reedy Zappers SG6 4800mAh 135C 7.6V 2S Shorty HV-LiPo – Maximum Power & Consistency! Upgrade your racing setup with the Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo, engineered with state-of-the-art LiPo chemistry to deliver unmatched power, reliability, and cycle life. Designed for elite on-road and off-road competition, the SG6 series enhances power output, lowers internal resistance, and increases durability, ensuring consistent voltage and high performance from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Delivers higher voltage, lower IR, and improved power output.✅ Updated Formulation & Construction – Increases efficiency, reliability, and durability.✅ Heavy-Duty Internal Structure – Designed for high-discharge applications in intense racing conditions.✅ High Capacity (4800mAh) with 135C Discharge Rate – Provides maximum power output and runtime.✅ Inherently Flat Discharge Curve – Maintains higher voltage deeper into the race for consistent power delivery.✅ Durable Hard Case with Low-Resistance Connectors – Prevents damage while minimizing power loss.✅ ROAR & BRCA Approved – Legal for competition use in sanctioned events. Next-Level Performance for Serious Racers! 🏁 Why Choose the Reedy Zappers SG6? 7.6V (HV-LiPo) design allows charging up to 4.35V/cell for maximum performance. Higher voltage retention throughout the race results in stronger acceleration and top-end speed. Ideal for both on-road & off-road applications, including 1/8 eBuggy and 1/10 racing. Proven reliability & extended cycle life for long-lasting, race-winning performance. 🔥 Power your RC car with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4800mAh Voltage: 7.6V (2S) Max Charge Rate: 9.6A Discharge Rate: 135C Dimensions: 96mm x 47mm x 25.1mm Weight: 207g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4800mAh 135C 7.6V Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4800mAh 135C Shorty is the go-to choice for serious racers, offering high voltage, low resistance, and superior durability. Whether you need explosive acceleration, extended run time, or consistent power delivery, this battery is engineered to give you the winning edge. 🔥 Upgrade your setup today and experience next-level performance with Reedy Zappers SG6! 🏁💨

Read more less

Team Associated Gear Differential Rebuild [91463]🛠 Freshen Up Your Diff!Keep your ride dialed with the Team Associated Gear Differential Rebuild Kit, designed specifically for the optional ASC91461 gear diff. Whether you're doing routine maintenance or bringing a worn-out diff back to life, this kit has what you need to keep your buggy smooth, responsive, and race-ready. 🧰 Features:✅ Designed for the optional ASC91461 gear differential✅ Genuine Team Associated parts for perfect fit and function✅ Ideal for performance rebuilds and regular maintenance 📦 Includes:All necessary components to rebuild one gear differential 🔥 Part Number: 91463

Read more less

Team Associated 23mm Carbon Fiber Front Shock Tower – RC10B74.1 Lightweight. Strong. Race-Ready. The RC10B74.1 23mm Carbon Fiber Front Shock Tower is a precision-cut replacement part designed specifically for Team Associated B74.1 and B74.1D 1/10 scale 4WD buggies. Crafted from high-quality carbon fiber, it offers strength without the weight—essential for competitive performance. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛡️ Durable and race-proven material 📏 23mm shock mounting geometry for consistent front-end handling 📦 Includes: (1) 23mm Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Upgrade your buggy’s performance with official Team Associated components.

Read more less

1up Racing 7075 LowPro Wing Washers – Lock It Down with Low-Profile Precision 💥 Keep your wing tight and your style tighter with the 1up Racing 7075 LowPro Wing Washers – the go-to choice for elite racers and style-focused builders. Whether you're launching off-road or speeding down the straight, these precision-machined aluminum washers are built to perform and look incredible doing it. 💪 Designed with no cutouts to trap dirt and an oversized 14mm diameter to reduce wing flex, these washers boost rear-end stability and give your ride that unmistakable 1up edge. ✨ Key Features: 🔩 7075 High-Strength Aluminum – Lightweight and tough enough for brutal landings📏 Low-Profile Design – No cutouts = no dirt buildup🌀 14mm Outer Diameter – Minimizes wing flex for consistent aero performance🎨 Available in 10 Anodized Colors – With mirror-like chamfered edges for that clean, pro look💡 Drag Car Ready – Clean body mount solution with aerodynamic benefit 📦 What’s Included? ✔️ (2) 7075 LowPro Wing Washers in your chosen color Note: Use with standard M3 flat head screws (not included). Slight screw head protrusion helps preserve the anodized finish. 🏁 Stay Locked. Stay Clean. Stay Fast. Whether you're racing, bashing, or building to win, the 1up Racing LowPro Wing Washers deliver race-ready function and next-level style. 💡 Finish Your Build Right – Add 1up Wing Washers to Your Setup Today!

Read more less

1up Racing 7075 Aluminum Flanged Locknuts – M3 Upgrade your RC build with 1up Racing 7075 Aluminum Flanged Locknuts, engineered for maximum durability, lightweight performance, and striking aesthetics. Inspired by the smooth lines of the SoCal Hot Rod scene, these locknuts feature mirror-like chamfer details, a floating hex for optimal wrench engagement, and an oversized 11mm serrated flange for unbeatable security. Precision CNC-machined from premium 7075 aluminum, these locknuts deliver exceptional strength and longevity while keeping weight to a minimum. Available in 10 bold anodized colors, they add the perfect finishing touch to any setup. Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Superior bite and maximum security for worry-free racing.✅ Oversized 11mm O.D. Flange – Enhances grip and stability, preventing wheel slippage.✅ Low-Profile Design – Keeps weight low and ensures a clean, streamlined look.✅ Floating Hex Design – Optimal wrench engagement for easy, secure installation.✅ 7mm Outer Hex & M4x0.7mm Threads – Standard fitment for hassle-free compatibility.✅ Mirror-Like Chamfered Edges – Glistens under light, giving your ride an unmistakable premium touch.✅ Available in 10 Bold Anodized Colors – Customize your RC with a style that stands out. In the Box: (4) 1up Racing 7075 Aluminum Flanged Locknuts – M3 Precision, Performance & Style! Don’t settle for ordinary—elevate your RC with 1up Racing’s lightest and most colorful flanged locknuts. With race-proven performance, premium materials, and unmatched style, these locknuts are the perfect finishing touch for any build. 🔥 Order today and 1up your ride! 🏁💨

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

  Push your racing to the limit with the ProTek RC 2S 130C Shorty LiPo—engineered with Si-Graphene+ HV technology for insane power delivery and ultra-low internal resistance. Perfect for stock and mod classes, this 7.6V 5000mAh shorty pack offers lightning-fast response and consistency lap after lap. 🔋 Features: 2S HV LiPo rated at 7.6V for higher voltage punch Massive 130C burst and low internal resistance for peak performance Silicon-Graphene+ chemistry for superior cycle life and thermal stability Lightweight shorty case for optimal weight distribution 5mm bullet connectors for high-current flow ROAR Approved for sanctioned competition 📦 Includes: (1) 5000mAh 2S 7.6V HV LiPo Shorty Battery (1) 5mm to 4mm bullet adapter set Specs: Capacity: 5000mAh Voltage: 7.6V (2S HV) C-Rate: 130C Dimensions: 96x47x25mm Weight: Approx. 219g Connector Type: 5mm bullet Whether you're racing onroad or offroad, stock or modified—this ProTek pack delivers the edge you need to win.

Read more less

Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.

Read more less

  Precision and reliability come standard with the RC10B74 Steering Blocks from Team Associated. Designed for durability and consistent performance, these blocks are a direct fit for your RC10B74 front-end steering assembly. 🔧 Key Features: OEM replacement for stock steering blocks Molded composite construction for long-lasting strength Maintains factory geometry and performance Lightweight yet rugged design 📦 Includes: (2) Steering Blocks (left and right) ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74 variants (consult manual for fitment) Restore your steering performance or keep a spare set in your pit bag—these steering blocks are an essential component for smooth, responsive control on the track.

Read more less

Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/4400mAh) – 140C Burst Ultra-Lightweight. High Voltage. Race-Ready. The Gens Ace Redline 2.0 4400mAh Shorty LiHV delivers elite-level performance in a compact, lightweight design. Perfect for modified and stock class racing, this pack uses Silicon Graphene technology for ultra-efficient discharge, reduced heat, and excellent cycle life — all in a low-profile shorty layout for ideal chassis balance. ⚙️ Features: ⚡ 140C Continuous Discharge – smooth, consistent power when it matters most 🔋 7.6V LiHV / 4400mAh Capacity – lightweight performance for serious racers 🔌 5mm Bullet Connectors – high-amp, secure, and reliable power transfer 🪶 Ultra Low-Profile Shorty Pack – minimal weight, maximum agility 🧪 Matched cells and advanced stacking for stable output and long life 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4400mAh Continuous Discharge: 140C Configuration: 2S1P Watt Hours: 33.44Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 18mm Weight: 163.1g (5.75oz) 🏁 For racers demanding every ounce of power in a nimble format, the Redline 2.0 4400mAh Shorty delivers blazing-fast response and unbeatable efficiency on the track.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

JConcepts Pin Swag 2.2" 4WD Buggy Front Tires (2) (Carpet) 🏁 Overview:The JConcepts Pin Swag 2.2" 4WD Buggy Front Tires are engineered to blend the best features of two proven designs—combining the outer lugs of the Swagger front tire with a dense pin arrangement for ultimate grip on carpet and turf surfaces. The Swag section is split down the center, allowing independent movement to conform to various track conditions, while the angular stagger section and vertical rib enhance precision handling. Features: ✔️ JConcepts original design with a fusion of pin and lug technology✔️ Low-profile carcass for stability and quick response✔️ Pin and Swag hybrid tread for increased surface contact and control✔️ Dense pin layout to improve wear resistance and longevity✔️ Hefty base pin with crisp edges for consistent bite✔️ Ultra-lightweight scalloped tire beads for reduced rotating mass In The Box: 📦 (2) JConcepts Pin Swag 2.2" 4WD Buggy Front Tires Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ Ideal for carpet and turf racing

Read more less

Protect your chassis and keep your B84 looking race-ready. This pre-cut chassis protective sheet is precision designed, offering durable protection against scrapes, wear, and track abuse. Manufactured by Legue Graphics, these chassis protectors deliver a clean, professional look while helping preserve long-term chassis condition. Available in multiple fun color options to match your build or team style. Features Precision cut specifically for each  Durable surface protection against scrapes and wear Includes extra removable tailpiece Clean, professional appearance Easy application after cleaning chassis with alcohol-based cleaner Manufactured by Legue Graphics Helps preserve chassis resale value Designed for competitive RC use  

Read more less

  Achieve pro-level setup accuracy with the JConcepts Aluminum Ride Height Gauge. Machined from billet aluminum, this high-spec tool provides precise measurements from 10–40mm, making it a must-have for competitive off-road racers. With laser-etched markings, smooth pivoting action, and a secure thumbscrew lock, this gauge ensures your ride height adjustments are consistent and repeatable. 🔥 Key Features: Precision-machined from billet aluminum Available in Blue (JCO2282-1) or Black (JCO2282-2) anodizing Laser-etched graduated scale from 10mm–40mm Rounded boss touch point for accurate chassis contact Chamfered silver edging highlights the design Pre-assembled with 4mm pivot hardware & 3mm thumbscrew Includes a latched storage box with foam insert for protection ✅ Compatibility: Works with a wide variety of 1/10 and 1/8 scale on-road and off-road vehicles Ideal for buggies, trucks, and touring cars (TC6/TC7 series) Suitable for any chassis requiring precise ride height adjustments within 10–40mm 📦 Includes: (1) JConcepts Ride Height Gauge (choose Blue or Black) (1) Latched Storage Box with Foam Cushion ⚠️ Tip:Most racers prefer to set ride height with a slight gap (~0.5mm) between the chassis and gauge for best performance.

Read more less

🏆 Fine-Tune Your Handling – Dial in your RC10B84 with the Factory Team Anti-Roll Bar Set. Designed to reduce chassis roll and increase stability, this kit gives racers the precision needed to handle high-speed corners with confidence. ⚙️ Features:✅ Multiple bar options for customizable roll stiffness✅ Improves cornering consistency and reduces body roll✅ Factory Team precision parts for smooth, efficient operation✅ Direct fit upgrade for the RC10B84 platform 📦 Includes: Complete Anti-Roll Bar Set with multiple stiffness options Hardware for installation 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use a stiffer bar on high-grip tracks to control traction rolling, and a softer bar on looser surfaces to maximize rear grip.  

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

This is a pack of two replacement Team Associated RC10B74 Rear Hub Hinge Pins.  COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.8–2.0mm) – 92291🎯 Rear-End Mastery, Dialed to Perfection Step up your tuning game with this optional 1.8–2.0mm rear anti-roll bar set for your RC10B74.1 or B74.1D. Designed for racers who crave consistency and performance, this set lets you tweak rear-end roll stiffness to match track conditions with precision. 💡 Adjustment Effects:🔄 Softer = More rear roll, more rear grip, less front grip, less on-power steering🚀 Stiffer = Less rear roll, less rear grip, more on-power steering, quicker response in chicanes 💪 Key Features:✅ Includes 1.8mm, 1.9mm, and 2.0mm sway bars✅ Increases tuning flexibility for race-day perfection✅ Precision fit for RC10B74.1 and B74.1D buggies 🔧 Includes:• (1) 1.8mm Sway Bar• (1) 1.9mm Sway Bar• (1) 2.0mm Sway Bar 📦 Part Number: 92291🏁 Brand: Team Associated

Read more less

Team Associated RC10B74.2 FT Chassis Protective Sheet. This is an optional chassis protective sheet intended to fit the Team Associated RC10B74.2 buggy. Using high quality adhesive backed vinyl, Team Associated has created a durable protective surface that not only is functional but looks great! Printed on the sheet is an accurate depiction of the B74.2 drivetrain layout, providing an "X-Ray" style look to the bottom of your vehicle. Package includes one main chassis protection sheet and three tail pieces giving you two extras.   COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 20mm Aluminum Clamping Servo Horn – 25T (Futaba/Savox/ProTek) – Part 1368Smooth Response. Secure Fit. Built to Perform. The Team Associated 20mm Aluminum Clamping Servo Horn (1368) is crafted from 7075 T6 aluminum for strength and precision. Designed for 25T spline servos (Futaba, Savox, ProTek, and others), this horn features a secure clamping design and a 20mm length that delivers smoother, more controlled steering input—ideal for 1/10 scale touring cars and competition setups. ✅ 7075 T6 aluminum construction – lightweight and incredibly strong✅ 20mm length – delivers smoother, more progressive steering feel✅ Clamping design – prevents spline slop and servo damage✅ Laser-etched spline size – easy, accurate identification✅ Compatible with Futaba, Savox, ProTek (25T spline)✅ Includes large M2.5 screw for secure clamp fit 📦 Includes: (1) 20mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1368 💡 Pro Tip: Always torque the clamp screw securely to lock in performance and reduce servo spline wear.

Read more less

When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less

Upgrade your brushless setup with the ProTek RC Braided Sensor Cable — built for durability, flexibility, and ultra-reliable data transfer between your ESC and motor. Whether you're racing or bashing, this premium sensor cable ensures clean communication and long-lasting performance. Overview The ProTek RC braided sensor cable uses flexible silicone-shielded internal wires wrapped in a tough nylon braided outer sheath for maximum protection. Heat-shrink ends secure the braid and reinforce the connection points, preventing damage or fraying. This creates a smooth-bending, shock-absorbing cable that maintains consistent sensor accuracy under extreme chassis movement. Perfect for any sensor-based brushless system that uses standard replaceable sensor harnesses. Features Durable black braided nylon outer sheath Silicone-shielded internal sensor wires Heat-shrink reinforced ends for long life Flexible, shock-absorbing design Ensures clean and consistent ESC–motor data transfer Compatible with all standard brushless systems using 6-wire sensor leads Great upgrade for racing applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 150mm

Read more less