JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are engineered for carpet and turf racing, offering exceptional traction, stability, and durability. Designed with radius-positioned pins and a low-profile carcass, these tires provide quick transitions, minimal side-wall deflection, and maximum grip on high-traction surfaces. Pre-mounted on JCO3348 Mono wheels and featuring plush open-cell inserts, they are race-ready straight out of the package. Features: ✔️ Pre-mounted for quick and hassle-free installation✔️ Low-profile carcass for reduced side-wall flex and quicker response✔️ Reverse “water tower” pin shape for enhanced grip and control✔️ Radius-positioned pin arrangement for maximum surface contact✔️ Directional sidewall lugging for precise cornering and acceleration✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Plush open-cell inserts included for added control and stability✔️ Mounted on JCO3348 Mono wheels in white or fluorescent yellow In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Tires (Pink Compound)📦 (2) JCO3348 Mono Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" Rear Buggy Wheels✅ Standard 12mm Hex Fitment

Read more less

1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

JConcepts Mono 2.2" Rear Wheels (4) – White – Fits B7, B74.2, YZ2, YZ4, XB2, XB4, LD3, L1R Overview:The JConcepts Mono 2.2" Rear Wheels are a proven favorite in 1/10 off-road racing, known for their durability, performance, and fitment across a wide range of modern race buggies. These wheels feature a concave dish design, outer glue bead catch, and precision-molded 12mm hex to ensure proper fitment and performance on high-traction tracks. Built with durability and weight savings in mind, the Mono wheel includes tall radial outer ribs, short inner beads, and 10 internal supporting ribs for a balanced combination of strength and low rotating mass. Packaged as a set of 4 wheels, they offer excellent value for racers who go through multiple sets during testing or events. Features: Durable Mono-style design with concave face Includes 4 wheels per pack Outer glue bead catch for clean tire installs Tall outer radial ribs and shorter inner bead ribs for weight savings 10 internal support ribs for stability Two vent holes per wheel Molded in bright white or fluorescent yellow ROAR National & IFMAR World Championship approved Compatibility: ✅ Team Associated B7 / B74.2✅ Yokomo YZ2 / YZ4✅ Xray XB2 / XB4✅ Schumacher LD3 / L1R

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

  Engineered for high-grip carpet and turf tracks, the JConcepts Fuzz Bite LP rear tires bring next-level precision and traction. With a low-profile carcass and reverse "water tower" pin design, these tires offer lightning-quick transitions and maximum grip without sacrificing longevity. Radius-positioned pins and directional lugging create consistent cornering and explosive forward bite. 💥 Open cell inserts included. Features:• Low-profile carcass for reduced sidewall roll• Reverse "water tower" pin shape for precision grip• Radius-positioned pin layout for optimized bite• Lightweight scalloped tire beads reduce rotational mass• Plush open cell inserts included

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

  Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks – ASC91901🛞 Precision Steering Just Got an Upgrade Fine-tune your front-end handling with the Team Associated -1mm Scrub Caster & Steering Block set for the RC10B6.4 and B6.4D! Whether you're chasing max steering feel or dialing in a tighter line through corners, this kit delivers the flexibility you need. The included caster inserts let you tweak your setup in seconds, giving you full control over how your buggy handles on any track. ✅ Designed specifically for B6.4 and B6.4D✅ Adjustable camber with multiple caster insert options✅ Lightweight and durable AE factory-grade components✅ Great for high-traction tuning or steering sensitivity adjustments 📦 Includes:• (2) Caster Blocks• (4) Steering Blocks• (2) +/- 0° Caster Inserts• (2) +/- 2.5° Caster Inserts• (2) +/- 5° Caster Inserts• (2) Shims 🔢 Part Number: ASC91901🏁 Brand: Team Associated

Read more less

JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tire is a top-tier pin tire option for carpet and turf racing. Designed for maximum traction and precise handling, this low-profile tire delivers quick transitions, minimal side-wall deflection, and superior cornering stability. The pre-mounted design ensures convenience and consistency, making it a go-to choice for competitive racers. Features: ✔️ Pre-mounted for hassle-free installation✔️ Low-profile carcass for fast transitions and stability✔️ Reverse “water tower” pin shape for maximum grip✔️ Radius-positioned pin arrangement for consistent traction✔️ Directional sidewall lugging for precise cornering control✔️ Ultra-lightweight scalloped tire beads to reduce rotational weight✔️ Mounted on JCO3353 wheels for durability and performance In The Box: 📦 (2) JConcepts Fuzz Bite LP 2.2" Pre-Mounted 4WD Front Buggy Tires (Pink Compound)📦 (2) JCO3353 Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ Standard 12mm Hex Fitment  

Read more less

JConcepts Pin Swag 2.2" Pre-Mounted 4WD Front Buggy Carpet Tires (White OR Yellow) (2) (Pink) w/12mm Hex 🏁 Overview:The JConcepts Pin Swag 2.2" Pre-Mounted 4WD Front Buggy Carpet Tires are built for precision control and long-lasting performance on carpet and turf racing surfaces. These tires combine the outer lugs from the Swagger with a dense pin arrangement, creating a versatile and high-traction option for serious racers. Mounted on JCO3353 wheels in white or fluorescent yellow, they offer a hassle-free, race-ready solution right out of the package. Features: ✔️ Pre-mounted on durable JCO3353 wheels (White or Yellow)✔️ Pin and Swag hybrid tread design for versatile traction and control✔️ Low-profile carcass for improved stability and responsiveness✔️ Hefty base pin with crisp ends to maximize bite✔️ Tight pin spacing for even wear and longevity✔️ Scalloped tire beads for reduced rotating mass In The Box: 📦 (2) Pre-Mounted JConcepts Pin Swag 2.2" 4WD Front Buggy Tires (Pink Compound)📦 (2) JCO3353 Wheels (White or Yellow) Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ 12mm Hex✅ Ideal for carpet and turf surfaces

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts – Ultra-Light, Ultra-Secure! Upgrade your RC wheels with the 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts, our lightest and most vibrant wheel nuts yet! Inspired by the smooth lines of the legendary SoCal Hot Rod scene, these precision-machined aluminum nuts bring a sleek, high-performance look to your ride. Designed with race-proven technology, they feature mirror-like chamfer details, a floating hex for perfect wrench engagement, and an oversized 11mm serrated flange for maximum bite and security. Built from premium 7075 aluminum, these wheel nuts deliver durability, style, and lightweight efficiency—all in one package! Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Maximum bite and wheel security, even in the toughest conditions.✅ Oversized 11mm O.D. Flange – Enhances grip and prevents wheel slippage under extreme loads.✅ Low-Profile, Floating Hex Design – Perfect wrench engagement and streamlined aesthetics.✅ 7mm Outer Hex & M4x0.7mm Threads – Universal fit for a wide range of RC vehicles.✅ Mirror-Like Chamfered Edges – Shines under light for an unmistakable high-end finish.✅ Available in 10 Bold Anodized Colors – Customize your RC with stunning color options. In the Box: (4) 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts Secure. Lightweight. Race-Ready. Don’t let inferior wheel nuts slow you down—lock in your wheels with the best in the game! The 1up Racing 7075 Aluminum Lockdown Wheel Nuts deliver unrivaled performance, security, and style, making them a must-have upgrade for any serious racer or enthusiast. 🔥 Order now and give your ride the 1up it deserves! 🏁💨

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Avid 7" Precut High-Clearance Wing (Standard or Lightweight) [AV10129-P-S] Product Overview: After months of development, the Avid 7" Precut High-Clearance Wing is engineered for optimal airflow, durability, and adjustability. Designed to fit all 1/10 scale buggies, this wing offers high clearance wheel cutouts and a low-drag profile, making it a top-tier choice for racers aiming to reduce turbulence while maintaining strength. Features: Precut 7” wing with standard thickness for maximum durability High and large radiused wheel cutouts for superior tire clearance 18.5° rear angle for reduced pressure and low drag without sacrificing strength Small centerline mark for easy centering during installation 8 structural ribs to maintain wing shape during crashes Dual gurney flap options to fine-tune rear traction Embossed AVID logo on the center panel Includes: (1) Avid 7" Precut High-Clearance Wing  Part Number: AV10129-P-S (Standard)/AV10129-P-LW (Lightweight)  

Read more less

Lock in your tires with the strongest, fastest-drying RC tire glue on the market. Pro-Line Pro-Bond CA Tire Glue delivers a 3,200 PSI bond strength, giving racers absolute confidence that tires stay glued lap after lap — no lifting, no peeling, no failures. This premium formula dries crystal clear, with zero yellowing or whitening, and uses a revolutionary bottle + tip design that makes application easier, cleaner, and more consistent than any other glue you’ve used. If you mount tires, this is the glue. Features 3,200 PSI holding strength — highest in its class Super-fast curing with crystal-clear finish Custom CA formula delivers maximum rubber bond Ultra-soft round bottle for perfect squeeze control Round design stays stable on the pit table Reusable translucent yellow applicator tips Perfect applicator hole size for tire gluing Cleaner, easier, more consistent than standard CA bottles Includes (1) Pro-Line Pro-Bond Tire Glue (0.7oz / 20g) (2) Reusable Yellow Pro-Bond Applicator Tips

Read more less

Factory Team Aluminum Servo Horn – 25T / 18.5mm – Part 1363Stronger Steering. Smoother Control. The Factory Team 25T Aluminum Servo Horn (1363) is a premium upgrade for RC8B3, RC8B3e, RC8T3, and RC8T3e platforms. Machined from 7075 T6 aluminum, this horn is built to handle the demands of competitive racing. Its shorter 18.5mm length offers a smoother steering feel while reducing stress on the servo. ✅ 7075 T6 aluminum construction – lightweight and ultra-strong✅ 18.5mm length – optimized for smoother steering and less servo strain✅ Clamping design with large M2.5 screw – secure fit with reduced slop✅ Laser-etched 25T spline size – easy identification✅ Compatible with XP Digital, Reedy, Futaba, Savox, and newer Hitec servos✅ Perfect fit for RC8B3, B3e, T3, and T3e platforms 📦 Includes: (1) 25T Aluminum Clamping Servo Horn (18.5mm) (1) M2.5 Clamp Screw Part #: 1363 💡 Pro Tip: Shorter servo horns like this one help protect your servo during high-impact landings and tight cornering.

Read more less

This is a replacement G3 Shock End Set for Team Losi Racing vehicles equipped with G3 shocks. Designed for durability and smooth suspension operation, this set includes four high-quality shock ends compatible with a variety of TLR models. ✅ Includes:• (4) G3 Shock Ends Perfect for routine maintenance or as a direct replacement to keep your suspension performing at its best.

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

This is a Team Associated Rear Hub Link Mount set of two, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied link mounts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D  

Read more less

🏁 Lightweight Strength for Elite PerformanceUpgrade your RC10B74.2 or B74.2D with this Carbon Front Shock Tower, built specifically for Gullwing arms. Crafted from high-quality carbon fiber, this tower offers the perfect blend of lightweight performance and rigid durability to keep your suspension responsive and race-ready. 🔧 Key Features: Designed for RC10B74.2 and B74.2D platforms Compatible with Gullwing front suspension arms Constructed from rigid, lightweight carbon fiber Improves handling precision and durability 📦 Includes: (1) Carbon Front Shock Tower (Gullwing Arm) 🔥 A must-have for racers who want consistent performance on demanding tracks!

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

JConcepts Mono 2.2" 4WD Front Buggy Wheels (4) – 12mm Hex – White or Yellow Overview:These JConcepts Mono 2.2" 4WD Front Buggy Wheels are engineered for precision fitment and performance, making them a top-tier choice for racers running the TLR 22X-4, Team Associated B74.1/B74.1D, or XRAY XB4 platforms. Designed with ROAR-legal dimensions, they feature a slight convex dish design, outer glue catch, and vent holes for smoother tire installation and consistent performance. Manufactured with advanced molding techniques and durable materials, these wheels offer a perfect balance of strength, weight, and style, while the signature JC logo ensures authenticity and quality. Features: Popular Mono-style dish design 4 wheels included per pack Available in bright white or fluorescent yellow Outer glue catch to prevent glue overflow Built-in vent holes for optimal tire mounting Durable material and advanced manufacturing process Direct fit for popular 4WD buggy platforms Compatibility: ✅ TLR 22X-4✅ Team Associated RC10 B74.1 / B74.1D✅ XRAY XB4 2021 Carpet / Dirt Editions

Read more less

Give your 1/10 off-road buggy maximum rotation, rear tire clearance, and pro-level stability with the JConcepts 7" High Clearance Pre-Cut Wing. Designed for carpet, turf, and dirt setups, this wing arrives pre-trimmed and ready to mount—no scissors, no hassle. Engineered with optimized rake, height, and side-dam shaping, the 0504 wing helps your buggy stay planted on power while freeing up rotation in tight corners. Its universal fit works with most 1/10 2WD and 4WD buggies, making it a must-have tuning item for modern high-grip and high-speed tracks. ⭐ Features Pre-cut design — mount it right out of the package 7" wide High Clearance profile for improved rotation and tire room Short-chord design for quicker steering response Flat-base layout for maximum rear tire expansion clearance Chopped rear corners reduce breakage and increase durability Dual stability fangs for added rigidity and consistent aero feel High rear angle provides excellent high-speed stability ROAR National Champion–proven design Works on most modern 1/10 buggies (2WD & 4WD)

Read more less

Upgrade your hardware with these Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Designed for a secure grip, the built-in serrations bite into the wheel surface to prevent loosening during high-impact runs or long race days. ✅ Features:• Low-profile design for improved clearance• Serrated face for extra locking power• Strong steel construction for durability• Standard M4 thread size 📦 Includes:• (10) M4 Serrated Steel Wheel Nuts🔧 Part Number: 91150💡 Ideal for 1/10 scale RC vehicles requiring M4 hardware.

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

Upgrade your drivetrain with Team Associated Factory Team Bearings — precision 10x15x4mm bearings designed to reduce friction, smooth out rotation, and improve overall performance. Featuring the signature blue shield for easy identification, these premium bearings deliver tighter tolerances and longer-lasting durability compared to stock components. Perfect for restoring worn-out bearing sets or boosting efficiency in your B5M, Apex, Prolite 4x4, ProRally, MGT 3.0, and many more platforms using 10x15x4mm bearings. Features: Premium Factory Team–grade precision bearings Blue-shielded on one side for quick identification Reduces friction and slop for smoother drivetrain operation Ideal upgrade or replacement for worn bearings Compatible with multiple Team Associated platforms Includes: (4) 10x15x4mm Factory Team Bearings

Read more less

Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.

Read more less

The Team Associated RC10B74 Front Suspension Arm Set is a genuine OEM replacement designed to restore the handling and durability of your buggy. Precision-molded from high-quality composite, these arms are built to withstand the demands of competitive racing. ✅ Durable Composite Construction – Strong and lightweight for racing performance✅ Direct OEM Replacement – Genuine Team Associated parts for perfect fit✅ Precision Fitment – Maintains proper suspension geometry and handling Includes: (1) Front Suspension Arm Set (left & right) Compatibility: Team Associated RC10B74 series buggies (RC10B74, B74.1, B74.1D, B74.2, B74.2D) Check your manual for exact fitment Part #: 92128

Read more less

Overview:Deliver maximum power with ProTek RC Low Profile 5mm “Super Bullet” Connectors, engineered for clean wiring, low resistance, and uncompromising reliability in high-current RC applications. About the Super Bullet ConnectorsThe ProTek RC Low Profile “Super Bullet” connectors feature a flat, lay-down solder design that makes for a tidy and efficient wiring setup—perfect for compact builds or low-clearance installations. Constructed from solid gold-plated brass, these connectors ensure superior conductivity and minimal voltage loss compared to traditional spring-type or Deans-style plugs. Designed for brushless motors, ESCs, chargers, and high-voltage batteries, these connectors set the new standard for performance RC power delivery. Features: Low-profile solder head for flat, lay-down wire connections Solid gold-plated design for ultra-low resistance and maximum efficiency Ideal for high-current / high-voltage applications Perfect for use between ESCs, batteries, motors, or power meters Improved durability and conductivity over traditional plug styles Simple to solder and install Includes: (2) 5mm Low Profile “Super Bullet” Male Connectors Other 5mm Bullet Options: PTK-5022: Standard (4 Male) PTK-5023: Standard (4 Female) PTK-5024: Standard (2 Male / 2 Female)

Read more less

Reedy Blackbox 610R 2S Competition ESC – ASC27016Unleash precision, power, and full control with the Reedy Blackbox 610R — Reedy’s most advanced 1/10 scale ESC yet. Built on the trusted legacy of the 510R, the 610R pushes the limits with updated 32-bit hardware, lightning-fast throttle response, and unmatched tuning capability. Whether you're running stock or modified 1/10 scale setups, this ESC delivers championship-winning performance in both on-road and off-road racing. Pair it with the optional Blackbox PROgrammer2 (not included) to unlock full customization and data logging. 🔧 Key Features: CNC-machined black aluminum case with integrated heat sink Fully adjustable brake, throttle, power, and safety functions Blinky mode with ROAR-approved software 32-bit MCU for ultra-fast response Precision throttle & brake control Ultra-low resistance FET board On-board power button Optional external fan ready Pro external capacitor board Firmware updateable (with PROgrammer2) 🧠 Advanced Tuning (with Blackbox PROgrammer2 – ASC27027): Brake Settings: Strength, frequency, drag brake, punch, dynamic drag Throttle Control: Drive frequency, current limit, punch, deadband Power Delivery: Boost and top speed timing, standard & expert modes Misc. Settings: BEC voltage, temp cutoff, rotation direction, mode switching Note: Requires firmware version EE460139 on the Programmer. Already installed if purchased as the 610R/Programmer combo (ASC27017). 📦 Specs: Voltage Input: 2S LiPo Suggested Use: 1/10 Off-Road & On-Road Resistance: 0.00043 ohms Continuous Current: 160A Motor Limit: 4.5T Dimensions: 38.5 x 36.9 x 19.5mm Weight (no wires/fan): 45g BEC Output: 6.0–7.4V / 5A Power Wires: 13-gauge silicone Fan: Optional (not included)

Read more less