Fine-tune your chassis balance with the Team Associated RC10B6.4 Factory Team Steel ESC Weight. Designed as a factory tuning option, this 33-gram steel weight mounts at the ESC location to help lower the center of gravity and improve on-power stability and overall traction. Originally intended for the RC10B6.4 platform, this weight is also compatible with multiple Team Associated vehicles, making it a versatile tuning upgrade for racers looking to dial in handling on different track conditions. Features Genuine Factory Team tuning component 33g steel construction for precise weight placement Improves balance, stability, and traction Ideal for fine chassis tuning on carpet, dirt, or clay Simple bolt-on installation Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B6.4 Team Associated RC10 B6.4D Includes (1) Factory Team Steel ESC Weight (33g)

Read more less

The Team Losi Racing TLR-1193 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Odds front sway bar set allows drivers to fine-tune front roll stiffness, improving steering feel, corner entry balance, and overall responsiveness based on track conditions. An effective tuning option for dialing in front-end behavior without altering springs or shock package. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Odds sway bar configuration Allows precise adjustment of front chassis roll and steering response Ideal for adapting to changing grip levels and track layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The Team Losi Racing TLR-1211 Rear Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This set allows drivers to fine-tune rear roll stiffness, helping dial in cornering balance, steering response, and overall handling for varying track conditions. Ideal for racers looking to adjust chassis roll and responsiveness without changing springs or shock setup. 🔧 Features Genuine Team Losi Racing tuning option Rear sway bar set for 22X 2WD buggy platforms Allows precise tuning of chassis roll and cornering behavior Ideal for adapting to different grip levels and track layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Rear Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The Team Losi Racing TLR234132 V2 Adjustable Pivot Insert Set is a replacement and tuning solution for select 22-series and TEN platforms. This updated V2 insert set allows precise adjustment of suspension pivot geometry, giving racers greater control over handling characteristics across a wide range of track conditions. Ideal for maintenance, rebuilds, or expanding setup options on compatible Elite platforms. 🔧 Features Genuine Team Losi Racing replacement and tuning parts V2 adjustable pivot inserts for advanced suspension tuning Enables precise adjustment of pivot geometry Ideal for setup changes, rebuilds, or race-day tuning Direct fit for compatible Losi platforms 📦 Includes (28) Individual Pivot Inserts ✅ Compatibility Losi 22 5.0 Elite Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

The Yeah Racing 60-Core High Current Servo Extension Wire is built for RC enthusiasts who demand reliable power delivery and signal integrity over longer distances. Perfect for rock crawlers, touring cars, or scale builds with extended chassis layouts, this heavy-duty extension lead ensures stable performance even under high-load conditions. ⚙️ Features: Designed for RC vehicles with remote servo placement 60-core wire construction supports high current servos Compatible with JR and Futaba-style connectors Provides a clean, secure wiring solution for custom builds Durable, flexible insulation resists wear and heat 📏 Specifications: Length: 150mm Connector Type: JR/Futaba Plug Wire Type: 60-core high-current cable 📦 Includes: (1) Yeah Racing 150mm 60-Core High Current Servo Extension Wire    

Read more less

Precision. Strength. Performance.Keep your Team Associated short course or stadium truck performing at its best with these Rear Suspension Arms (71105). Designed for precise geometry and rugged durability, they deliver consistent handling and reliability on the track or in the dirt. Factory Fit. Race Proven.These genuine Team Associated replacement arms fit both left and right sides and are molded from high-strength composite for balanced flex and long-lasting performance. Ideal for racers and bashers alike looking to restore factory handling and suspension response. 💪 Features: Genuine Team Associated replacement parts High-strength composite material for durability and consistent flex Factory geometry for precise suspension movement Direct fit for multiple RC10 platforms Includes left and right arms 📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ✅ Compatibility: Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Team Associated RC10 T6.1  

Read more less

Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty – High-Performance, Low-Profile Power! Maximize your racing potential with the Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo, engineered with cutting-edge advancements in LiPo cell manufacturing and battery construction. Designed for elite on-road and off-road competition, this battery delivers higher power output, lower internal resistance, and increased durability, ensuring consistent voltage from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Improves efficiency, reliability, and power output.✅ High-Voltage (HV) 7.6V Design – Safely charges to 4.35V/cell for maximum performance.✅ Flat Discharge Curve – Sustains higher voltage deeper into the race for consistent power delivery.✅ High Capacity & 135C Discharge Rate – Delivers explosive acceleration and extended runtime.✅ Durable Hard Case – Protects against damage in high-impact racing environments.✅ Low-Resistance Embedded Connectors – Minimizes power loss for peak efficiency.✅ ROAR & BRCA Approved – Legal for competitive racing.✅ Male ESC Connectors Included – Ensures plug-and-play compatibility. Precision Power for Competitive Racing! 🏁 Why Choose the Reedy Zappers SG6 4000mAh? Low-profile (LP) design for better weight distribution and improved handling. Higher voltage retention throughout the race ensures stronger acceleration and consistent performance. Ideal for both on-road & off-road racing, including 1/8 eBuggy and 1/10 scale competition. Proven durability and extended cycle life for long-lasting, race-winning performance. 🔥 Race with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4000mAh Voltage: 7.6V (2S) Max Charge Rate: 8.0A Discharge Rate: 135C Dimensions: 95.8mm x 46.8mm x 18.5mm Weight: 162g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4000mAh 135C LP Shorty is designed for racers demanding high-voltage, low-profile performance. Whether you're competing in tight indoor tracks or wide outdoor circuits, this power-dense battery delivers the speed, consistency, and durability needed to win. 🔥 Upgrade your setup today and experience next-level power with Reedy Zappers SG6! 🏁💨

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated RC10B6.4 Factory Team Angled Top Plate & Ballstud Mount (Carbon) [71183]🔧 Lighter. Stiffer. Tuned for Victory.Upgrade your RC10SC6.4 or RC10T6.4 with this Factory Team Angled Top Plate & Ballstud Mount made from ultra-rigid carbon composite. Designed for racers who demand precision and tuning flexibility, this lightweight mount gives your rig an edge on varying track surfaces. 💥 Features:✅ Lightweight carbon composite for reduced flex and added durability✅ Angled design offers enhanced tuning options✅ Factory Team quality – built for performance✅ Ideal for RC10SC6.4 and RC10T6.4 platforms✅ Includes: (1) Top Plate & Ballstud Mount📦 Part Number: 71183🏁 Brand: Team Associated

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated Rear Hubs Set – RC10B74.1 OEM Replacement for Precision Rear-End Handling The ASC92267 Rear Hubs are a direct replacement for the Team Associated RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built to factory specs, these hubs restore precise suspension geometry and consistent rear-end performance. ⚙️ Features: 🏁 Genuine Team Associated replacement part 🛠️ Maintains proper rear toe and camber link geometry 💪 Durable molded construction for reliable wear resistance 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Stay dialed and race-ready—replace worn or damaged hubs with confidence.  

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less

Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Gain a competitive edge with the R1WURKS Ultra-Lightweight Titanium HD CVA Bones, engineered to dramatically reduce drivetrain rotating mass for faster acceleration and improved responsiveness. Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium, these CVA bones are designed specifically for high-performance stock racing applications. Optimized for 17.5T and 21.5T classes, they help deliver sharper throttle response, smoother braking, and improved cornering agility. ⚡ Ultra-Lightweight Racing Advantage Weighing only 6.0g for the pair, these CVA bones are 38.78% lighter than standard bones, significantly reducing rotational inertia in the drivetrain. Less rotating mass allows the drivetrain to spin up and slow down faster, giving racers improved throttle control and braking response. This results in a car that feels more agile, responsive, and efficient on the track. 🏁 Improved Efficiency & Performance The reduction in drivetrain mass also improves overall efficiency, helping reduce motor load and lower motor temperatures during long runs. Combined with improved power transfer, this helps racers maintain consistent performance throughout heats and mains. ⚙️ Features Ultra-lightweight design at 6.0g per pair 38.78% lighter than standard CVA bones Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium Reduces drivetrain rotational inertia Improves acceleration and braking response Enhances cornering agility and vehicle responsiveness Improves drivetrain efficiency and power transfer Helps reduce motor temperatures Laser-etched logos and identification markings 📦 Includes (2) Titanium CVA Bones 🔧 Compatibility TLR 22X TLR 22 5.0 Replaces: TLR232138 A premium performance upgrade for competitive racers looking to reduce drivetrain weight, improve responsiveness, and maximize efficiency on the track.  

Read more less

Refresh your drivetrain and keep your 22X-T running smooth with the Essentials Bearing Kit. Designed to replace the key high-wear bearings in your truck, this kit reduces friction, improves efficiency, and restores that free-spinning feel every racer wants. Perfect for maintenance rebuilds or race-prep freshening before a big event. Includes (8) 5x10x4mm Revolution Bearings (Greased) (4) 10x15x4mm Rubber Shielded Bearings (Greased) (2) 5x13x4mm Revolution Bearings (Greased) Features Direct fit for TLR 22X-T High-performance Revolution series bearings Pre-greased for durability and longevity Rubber shielded where needed for debris protection Reduces drivetrain drag Improves smoothness and consistency Keep your 22X-T efficient, free, and race-ready with a fresh set of quality bearings. 🏁    

Read more less

The Team Associated 3-Gear Gearbox Set is a genuine replacement assembly designed for the RC10B7, RC10T7, and RC10SC7 platforms. Built to factory specifications, this gearbox set ensures proper drivetrain alignment, durability, and smooth power delivery. Whether you're rebuilding after heavy track use or replacing damaged components, this 3-gear configuration maintains the performance and reliability expected from Team Associated race platforms. Features Genuine Team Associated replacement part 3-gear gearbox configuration Factory-fit for proper alignment and durability Maintains smooth and efficient power transfer Includes (1) 3-Gear Gearbox Set Compatibility Team Associated RC10B7 Team Associated RC10T7 Team Associated RC10SC7 A reliable drivetrain replacement to keep your buggy or truck performing at its best. 🏁    

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Replace or upgrade your rear suspension with this Team Associated carbon fiber rear shock tower, designed specifically for the RC10T7 platform. Made from lightweight, rigid carbon fiber, this shock tower provides precise shock mounting and consistent suspension geometry for racing or bashing. Features: Lightweight carbon fiber construction High rigidity for consistent suspension performance Precision fit for the RC10T7 platform Direct replacement for the stock rear shock tower Includes: (1) RC10T7 Rear Shock Tower Compatibility: Team Associated RC10T7 Team Associated RC10SC7 Part Number: 71208 Ideal for racers looking to maintain factory geometry or replace a damaged rear shock tower with a genuine Team Associated part.  

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

Experience unmatched power and consistency with the NitroPro 2S 7.4V 8500mAh 140C Low-Profile Stick Pack. Built from the highest-grade proprietary cells available, this battery delivers blistering acceleration, rock-solid voltage retention, and the endurance top racers demand. 🔥 Key Features: High-output 140C continuous discharge for extreme performance Constructed from premium proprietary LiPo cells — maximum punch and reliability Low-profile stick pack design for optimal chassis balance Consistent voltage under heavy load for competitive racing conditions Built to exceed the demands of professional-level drivers ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 8500mAh Discharge Rate: 140C Dimensions: 25mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullets Weight: 319g 📦 Includes: (1) NitroPro 2S 7.4V 8500mAh 140C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Balance-charge every cycle and avoid over-discharging (keep cells above 3.2V) for maximum performance and lifespan.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Revolutionary Stadium Truck PerformanceThe Team Losi Racing 22X-T delivers the next evolution in TLR’s winning 22-series legacy. Designed for today’s high-grip tracks, this stadium truck offers unmatched consistency, tunability, and responsiveness. Whether you’re chasing club wins or national podiums, the 22X-T gives you the edge to drive harder and faster. Key Highlights: Updated laydown gearbox with quick-access ball diff 13mm G3 big-bore shocks with updated springs for plush landings 2mm hard-anodized 7075-T6 aluminum chassis for strength and balance Adjustable caster inserts (-5° to +5° in 2.5° steps) Multiple king pin offset and spindle options for steering feel Carbon fiber front and rear shock towers Built-in 30mm motor fan mount Super Heavy Duty Slipper (SHDS) Adjustable rear pivots for toe/anti-squat fine-tuning Compatible with standard 2.2” stadium truck wheels Includes: (1) 22X-T 1/10 Electric 2WD Off Road Stadium Truck Kit (1) Instruction Manual Needed To Complete: 1/10 motor & ESC 7.4V–7.6V 2S LiPo “shorty” battery & charger 2-channel radio system & steering servo Polycarbonate stadium truck body & paint Stadium truck wheels & tires Tools & silicone fluids Specs: Scale: 1/10 Drive: 2WD Power: 2S LiPo shorty Length: 16.5" (419mm) Wheelbase: 11.3" (287mm) Width: 12.8" (326mm) Height: 5.2" (132mm) Assembly: Kit (assembly & electronics required)

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) [71161]🛞 Dial in that perfect front-end feel!Upgrade your T6.2 or SC6.2 with the 13mm Front Shock Springs in Grey (4.60 lbs/in). At 54mm long, these springs are engineered for plush low-speed bump absorption and strong high-speed support. That means more grip, better landings, and next-level consistency lap after lap.💥 Features:✅ Grey rate: 4.60 lbs/in✅ Length: 54mm✅ Designed for 13mm bore shocks✅ Ideal balance of soft feel and responsive support✅ Includes 2 springs📦 Part Number: 71161🏁 Brand: Team Associated

Read more less