Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated Rear CVA Axle – 66mm (RC10B74) Restore or upgrade your B74 drivetrain. The ASC92207 66mm Rear CVA Axle is a precision-engineered replacement part designed specifically for the Team Associated RC10B74. Whether you're maintaining performance or rebuilding after wear, this axle ensures smooth power delivery and durability for competitive 1/10 4WD off-road racing. ⚙️ Features: 🛞 66mm length optimized for rear CVA driveshaft assemblies 🧰 Direct replacement for factory parts 💪 Hardened for strength and longevity under racing conditions 📦 Includes: (1) 66mm Rear CVA Axle ✅ Compatibility: Team Associated RC10 B74 Keep your B74 running smooth and race-ready with genuine Team Associated drivetrain components.

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Keep your RC10T6.2 drivetrain running smooth with these 92.5mm Rear CVA Bones. Built to handle the demands of competitive racing, these precision components deliver efficient power transfer and long-lasting durability on high-performance stadium trucks. 🔥 Key Features: Designed specifically for the RC10T6.2 rear CVA drivetrain 92.5mm length for proper fit and rear suspension geometry Durable steel construction for high-strength performance Factory Team-grade reliability and consistency Ideal for replacing worn or damaged CVA bones ✅ Compatibility: RC10T6.2 May fit other Team Associated vehicles using 92.5mm CVA bone setups—check manual for fitment 📦 Includes: (2) Rear CVA Bones (92.5mm) ⚠️ Tip:Lubricate pivot points and inspect CVA components regularly for wear to extend drivetrain life.

Read more less

🏁 Smooth Power. Race-Ready Control. Built for Stock Class. The Cayote Crest Stocki 13.5T motor is designed for racers who need consistent, controllable power within stock class limits. With a sensored design and competition-focused tuning, it delivers the smooth throttle response and reliability needed for tight, technical racing. 🏁 About the Crest Stocki Motor 🎯 Stock Class Performance Built specifically for stock racing, this motor delivers balanced power and control while meeting major racing regulations, making it a dependable option for competitive environments. ⚡ Smooth, Precise Control The sensored system provides clean throttle response and consistent acceleration, helping maintain control through corners and technical sections. 🏎️ Race-Ready Compliance Fully compliant with ROAR, EFRA, and BRCA standards, making it suitable for organized racing at multiple levels. 🔧 Key Features ✔ Sensored brushless motor design✔ Smooth and consistent throttle response✔ Optimized for stock class racing✔ ROAR compliant✔ EFRA approved✔ BRCA approved✔ Competition-tuned performance✔ Adjustable timing 📦 Includes (1) Crest Stocki 13.5T Brushless Motor (1) Sensor Cable 📊 Specifications Application: 1/10 Turns: 13.5T Type: Brushless – Sensored Voltage: 2S LiPo (7.4V) Adjustable Timing: Yes Poles: 2 Connector: Solder Tab Dimensions: 2.04 x 1.41in (51.9 x 35.8mm) Shaft Diameter: 1/8in (3.175mm) Weight: 5.27oz (149.5g) 🏁 Dialed for control. Built for racing. Ready for tech.

Read more less

The Team Associated RC10T7 and RC10SC7 Rear Suspension Arms are genuine replacement components designed to restore proper suspension performance and durability. Manufactured to factory specifications, these rear arms ensure correct geometry, strength, and consistent handling for your T7 or SC7 platform. Perfect for routine maintenance, race-day repairs, or keeping a spare set in your pit box. Features Genuine Team Associated replacement parts Factory-fit rear suspension arms Maintains proper suspension geometry Durable construction for racing conditions Includes (2) RC10T7 / RC10SC7 Rear Suspension Arms Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 A dependable replacement set to keep your suspension tight, consistent, and race-ready. 🏁  

Read more less

Upgrade your factory steering with the R1WURKS Aluminum Steering Rack, a precision-machined replacement designed to dramatically improve durability, steering precision, and on-track feel. Replacing the stock plastic component with 7075-T6 aluminum delivers tighter response and long-term reliability—without adding weight. At just 2.80 grams, this rack offers race-ready strength in a lightweight package, finished in sleek black anodizing with R1WURKS branding. Key Features Increased durability and precision over stock plastic Sharper steering response and improved feel Ultra-lightweight design: 2.80g CNC-machined from 7075-T6 aluminum Black anodized finish with R1WURKS branding Includes (1) Aluminum Steering Rack (2) 4×6×0.2mm shims Fitment B7 B7.1 B7D T7 SC7 B6.4 B6.4D SC6.4 T6.4 Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. A simple, effective steering upgrade for racers who want precision you can feel—lap after lap. 🏁  

Read more less

Fine-tune your front-end geometry with the Vision Racing (VR) Minus One C-Block, designed for racers who want maximum adjustability and precision from their TLR 22X and 22X-T platforms. This C-block removes 1 degree of toe-out per side, allowing setups all the way down to 0° total toe. It’s an ideal option for high-grip tracks or drivers looking to calm initial steering while maintaining consistency and control. Features & Benefits: Removes 1° of toe-out per side Allows setup down to 0° total front toe Expands front-end tuning range Precision-machined for accurate geometry Race-focused design for consistent handling Compatibility: TLR 22X AC TLR 22X DC TLR 22X-T Includes: (1) Vision Racing Minus One C-Block A must-have tuning option for drivers looking to dial in front-end feel and unlock additional setup flexibility on the 22X platform.   Includes: (1) Vision Racing Carbon Front Pivot Brace A smart performance upgrade for racers looking to tighten up front suspension action and maintain precise geometry throughout a race.        

Read more less

Keep your front suspension tight and precise with the Team Losi Racing 22X AC Narrow Caster Blocks. These genuine replacement parts are designed specifically for the 22X AC 2WD buggy platform and are ideal for repairs, rebuilds, or keeping spares in your pit box. Features & Benefits: Genuine Team Losi Racing replacement components Narrow caster block design for proper 22X AC front-end geometry Precision molded for consistent fit and smooth steering action Compatibility: Team Losi Racing 22X AC 2WD Buggy Includes: (2) Narrow caster blocks Perfect for maintaining factory handling and reliability on your 22X AC.  

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Unlock instant throttle response and maximum efficiency with the Team Losi Racing 22X Slipper Eliminator Plates Set — the ultimate upgrade for stock class racers aiming to shave weight and dominate on high-traction tracks. 🔧 Features: Designed specifically for stock racing applications Lightweight CNC-machined aluminum construction Hard anodized for extra strength and sleek looks Eliminates slipper assembly for direct power transfer Reduces rotating mass for quicker acceleration Rigid design ensures consistent drivetrain performance 📦 Includes: (1) Aluminum Slipper Eliminator Plates Set ⚠️ Tech Note: Not recommended for modified racing due to increased drivetrain stress. ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

1up Racing Pro-RX FH4 2.4GHz Receiver – Sanwa-Compatible, High-Performance & Affordable! Upgrade your RC setup with the 1up Racing Pro-RX FH4 2.4GHz Receiver—a high-performance yet cost-effective alternative to Sanwa FH4 receivers. Endorsed by 1up Racing Factory Drivers, this receiver has been rigorously tested to deliver the same level of reliability and responsiveness as its premium counterparts, making it the go-to choice for serious racers. Key Features: ✅ Supports Normal, SSR, and SHR Channel Response Modes – Ensures smooth and ultra-responsive performance.✅ 4-Channel Receiver – Provides versatile control for advanced RC setups.✅ Ultra-Lightweight Design (7g) – Compact and minimal weight impact for race-ready performance.✅ Small Footprint (28x20.5x18.5mm) – Fits easily in tight spaces without compromising functionality.✅ Wide Voltage Input (3.5V-8.4V) – Compatible with a range of power sources.✅ Includes Protective Foam-Lined Case & Bind Plug – Keeps the receiver safe and secure when not in use. Compatible With: The 1up Racing Pro-RX FH4 Receiver works flawlessly with the following Sanwa transmitters:✔ Sanwa EXCES Z / EXCES ZZ✔ Sanwa M11X / M12 / M12-RS / M12-S✔ Sanwa M17✔ Sanwa MT-4 / MT-4S / MT-44 / MT-S ⚠️ Note: Antenna-free receivers sacrifice extended range. If you require maximum range, consider a receiver with an external antenna. In the Box: (1) 1up Racing Pro-RX FH4 2.4GHz Receiver (1) Protective Foam-Lined Case (1) Bind Plug (1) Instruction Manual Reliable. Responsive. Race-Ready. The 1up Racing Pro-RX FH4 is built for competitors who demand precision control, reliability, and affordability. Whether you're replacing an existing receiver or upgrading your setup, this Sanwa-compatible receiver delivers elite performance without the premium price tag. 🔥 Upgrade today and take your racing experience to the next level! 🏁💨

Read more less

Team Associated 5.5x0.5mm Aluminum Ball Stud Washers – Blue (10) – Part 31381Precise Tuning. Clean Looks. Universal Fit. The Team Associated 5.5x0.5mm Aluminum Ball Stud Washers (31381) are a must-have for fine-tuning suspension geometry and roll center adjustments. With a small outside diameter and anodized blue finish, these lightweight washers are ideal for 1/10 scale vehicles, especially touring and on-road setups. ✅ Pack of 10 precision-machined washers✅ 5.5mm outer diameter / 0.5mm thickness✅ Made from lightweight aluminum – won't add unwanted weight✅ Blue anodized finish – clean, pro-level look✅ Perfect for ball stud spacing and suspension tuning✅ Fits all 1/10 scale vehicles – off-road or on-road 📦 Includes: (10) 5.5x0.5mm Blue Aluminum Ball Stud Washers Part #: 31381 💡 Pro Tip: Use multiple washers to stack for exact suspension height or link angle adjustments.

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

Upgrade your TLR 22X with the Aluminum Narrow Steering Spindles (2°), engineered for racers seeking precise steering response, improved durability, and consistent performance across varying track conditions. The narrow configuration provides refined steering characteristics suited for specific setup needs and tuning preferences. Precision CNC machined from high-strength 7075 aluminum, these spindles deliver exceptional strength and impact resistance while maintaining lightweight performance. The black anodized finish with chamfered edges enhances durability and corrosion resistance while giving your build a clean, factory race appearance. Features 2° narrow steering spindle configuration CNC machined for precise fit and finish Constructed from high-strength 7075 aluminum Black anodized for added durability Chamfered edges for a premium look Improves steering precision and stability Lightweight yet highly durable design Direct upgrade for TLR 22X platforms Includes (2) Aluminum Narrow Steering Spindles (Black, 2°) A race-focused steering upgrade designed to sharpen handling and increase front-end durability on the TLR 22X platform. 🏁    

Read more less

Commemorate Team Losi Racing’s IFMAR World Championship with the official TLR World Champion Trucker Hat. Built on the iconic Richardson 112 platform, this cap combines premium comfort, durability, and classic trucker styling that has made it one of the most popular hats in the USA. Known for its quality construction and timeless fit, the Richardson 112 features a structured front panel and breathable mesh back, making it perfect for race days, shop time, or everyday wear. With championship-inspired TLR branding, this hat lets you represent winning heritage wherever you go. Features Official TLR World Championship commemorative design Richardson 112 premium trucker cap Structured front with breathable mesh back Classic mid-profile fit Adjustable snapback closure Durable, high-quality construction A clean, race-inspired look that celebrates TLR’s championship legacy while delivering everyday comfort and style. 🏁  

Read more less

Fine-tune your track width and lock in wheel reliability with the Team Losi Racing 22X Aluminum 12mm Wheel Hex set. Precision-machined from ultra-lightweight, rigid aluminum, these hexes deliver strength and durability without adding unnecessary rotating weight. The clamp-style design provides a secure, slip-resistant fit on the axle, helping eliminate wheel wobble and improving consistency under acceleration and heavy cornering loads. Finished with a durable anodized coating, these hexes resist corrosion while giving your 22X that clean, pro-level race look. Laser-etched size markings make quick setup changes easy at the track, and the included axle pins ensure straightforward installation. The 7mm thickness option allows precise tuning of track width and handling characteristics to match surface conditions and driving style. Features: Strong, lightweight aluminum construction Clamp-style design for secure axle fit Anodized finish for durability and corrosion resistance Laser-etched size markings for quick identification Includes axle pins for easy installation 7mm thickness for precise track width tuning Includes: (2) Aluminum 12mm Wheel Hex (7mm) Built for serious racers who demand precision, durability, and consistent performance from their TLR 22X platform.

Read more less

Add front-end stability and cooling performance to your race build with the Team Losi Racing 22X Front Low Wing & Fan Mount Set. Designed specifically for the 22X 2WD buggy platform, this set helps improve aerodynamic balance while providing a secure mounting solution for your motor cooling fan. The front low wing increases front downforce, helping improve steering feel and consistency on high-speed sections and high-grip surfaces. Paired with the included fan mount, this setup supports better motor cooling during long mains and hot race days, keeping performance consistent from start to finish. Whether you're refreshing worn components or dialing in your race setup, this is a must-have replacement for competitive 22X racers. Features: Genuine TLR replacement parts Improves front-end stability and steering feel Provides secure motor fan mounting Designed for competitive 22X setups Direct fit for 22X 2WD buggy platforms Includes: (1) Front Low Wing (1) Fan Mount Built for racers who want balanced aero performance and reliable cooling when it matters most.  

Read more less

Dial in rear grip and balance with the JConcepts “Finnisher” Gurney Spoiler. Designed as a high-performance replacement, this gurney spoiler enhances rear traction and refines handling on aggressively styled Finnisher truck bodies. Engineered to complement the JConcepts Finnisher T5M and Finnisher TLR 22-T 2.0 MM bodies, this spoiler helps stabilize the rear end, improve corner exit, and maintain overall balance on high-traction and demanding track conditions. Features & Benefits: Increases rear grip and stability Helps balance handling on aggressive truck bodies Precision molded for consistent fit and performance Genuine JConcepts replacement part Compatibility: Losi 22T 2.0 Team Associated RC10 T5M Team Associated RC10 T6.1 Team Associated RC10 T6.2 A simple, effective upgrade for racers looking to fine-tune rear traction and handling performance.

Read more less

Bellcrank Set Overview:The Team Losi Racing 22X Composite Steering Bellcrank Set is a direct replacement steering component designed to restore smooth, precise steering performance on your 22X buggy. Molded from durable composite material, this bellcrank set delivers reliable steering response while maintaining the lightweight characteristics racers expect from the 22X platform. 🔧 Key Features Direct replacement composite steering bellcrank set Durable composite construction for consistent performance Restores smooth and precise steering feel Designed specifically for the 22X platform 📦 Includes (1) Steering Bellcrank Set 🚗 Compatibility Team Losi Racing 22X platforms Perfect for routine maintenance or race-day repairs, this composite bellcrank set keeps your 22X steering system operating at peak performance.  

Read more less

Charge Clean. Charge Confident. Upgrade your charging setup with the Team Exalt ProCharge 2S Specialized Charging Cable, designed for precision, durability, and a professional look at your pit station. Built for Junsi iCharger 456/458 Duo chargers, this premium cable ensures a clean, secure, and efficient charge for your 2S LiPo batteries. Professional-Grade Construction Each ProCharge cable is meticulously assembled with 12AWG charge leads and 18AWG balance leads, paired with high-quality XT90 and 5mm bullet connectors for consistent, low-resistance power delivery. A custom braided PET sleeve and self-sealing shrink tubing keep everything neat, organized, and protected from wear. Features: Custom-built 2S ProCharge cable for Junsi iCharger 456/458 Duo XT90 charger connector with 5mm battery bullets 12AWG main leads and 18AWG balance leads for reliable current flow 2mm balance plug to 3-pin XH connector Braided PET sleeve for a clean, professional finish Self-sealing shrink tube ensures durability and neat cable management Reduces pit clutter and promotes safe, organized charging Specifications: Spec Detail Charger Connector XT90 Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt ProCharge 2S Specialized Charging Cable Team Exalt — Professional Power. Cleaner Charging.

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

Overview:Introducing the 1up Racing 7075 Aluminum Locknuts (M3) – the ultimate combination of strength, style, and lightweight performance. Precision-crafted from high-quality 7075 aluminum, these locknuts deliver the durability you need while saving weight where it counts. Each nut features a tight-fitting nylon insert that locks in place to keep everything secure, even under extreme R/C racing conditions. Choose from 10 bold anodized colors to match your build’s style and make your ride stand out! Features: Includes 8 locknuts per package Premium 7075 aluminum construction for strength and lightweight performance 5.5mm outer hex for easy installation M3 x 0.5mm threads (fits standard M3 hardware) Nylon lock inserts prevent loosening over time Available in 10 stunning anodized finishes for maximum style Compatibility: Fits most 1/10 and 1/8 scale R/C applications requiring M3 locknuts Perfect for off-road buggies, stadium trucks, touring cars, crawlers, drones, and more

Read more less

Keep your suspension tight and precise with the XRAY Suspension Pivot Pins. Manufactured from premium hardened steel, these pins are designed for maximum strength and long life while maintaining smooth suspension movement. Features: Precision-ground hardened steel construction Ensures smooth, slop-free suspension arm movement Designed to withstand the demands of racing Easy drop-in replacement part Includes: (2) Suspension Pivot Pins Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY vehicles using this pivot pin size (check manual for exact fit)

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less

Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less