Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated 5.5x0.5mm Aluminum Ball Stud Washers – Blue (10) – Part 31381Precise Tuning. Clean Looks. Universal Fit. The Team Associated 5.5x0.5mm Aluminum Ball Stud Washers (31381) are a must-have for fine-tuning suspension geometry and roll center adjustments. With a small outside diameter and anodized blue finish, these lightweight washers are ideal for 1/10 scale vehicles, especially touring and on-road setups. ✅ Pack of 10 precision-machined washers✅ 5.5mm outer diameter / 0.5mm thickness✅ Made from lightweight aluminum – won't add unwanted weight✅ Blue anodized finish – clean, pro-level look✅ Perfect for ball stud spacing and suspension tuning✅ Fits all 1/10 scale vehicles – off-road or on-road 📦 Includes: (10) 5.5x0.5mm Blue Aluminum Ball Stud Washers Part #: 31381 💡 Pro Tip: Use multiple washers to stack for exact suspension height or link angle adjustments.

Read more less

🏁 Smooth Power. Race-Ready Control. Built for Stock Class. The Cayote Crest Stocki 13.5T motor is designed for racers who need consistent, controllable power within stock class limits. With a sensored design and competition-focused tuning, it delivers the smooth throttle response and reliability needed for tight, technical racing. 🏁 About the Crest Stocki Motor 🎯 Stock Class Performance Built specifically for stock racing, this motor delivers balanced power and control while meeting major racing regulations, making it a dependable option for competitive environments. ⚡ Smooth, Precise Control The sensored system provides clean throttle response and consistent acceleration, helping maintain control through corners and technical sections. 🏎️ Race-Ready Compliance Fully compliant with ROAR, EFRA, and BRCA standards, making it suitable for organized racing at multiple levels. 🔧 Key Features ✔ Sensored brushless motor design✔ Smooth and consistent throttle response✔ Optimized for stock class racing✔ ROAR compliant✔ EFRA approved✔ BRCA approved✔ Competition-tuned performance✔ Adjustable timing 📦 Includes (1) Crest Stocki 13.5T Brushless Motor (1) Sensor Cable 📊 Specifications Application: 1/10 Turns: 13.5T Type: Brushless – Sensored Voltage: 2S LiPo (7.4V) Adjustable Timing: Yes Poles: 2 Connector: Solder Tab Dimensions: 2.04 x 1.41in (51.9 x 35.8mm) Shaft Diameter: 1/8in (3.175mm) Weight: 5.27oz (149.5g) 🏁 Dialed for control. Built for racing. Ready for tech.

Read more less

The Team Associated Factory Team 8.5mm Aluminum Clamping Wheel Hexes are an optional upgrade designed to provide a secure, slip-resistant wheel mounting solution. Featuring a clamping design, these hexes help prevent wheel wobble and maintain consistent wheel alignment under high-load racing conditions. Machined from durable aluminum, they offer lightweight strength while improving reliability over standard hex designs. Ideal for racers looking for a more secure and precise wheel fit. Features Factory Team optional upgrade 8.5mm clamping wheel hex design CNC-machined aluminum construction Helps reduce wheel slop and movement Improves wheel mounting security Lightweight and durable Includes (2) 8.5mm Aluminum Clamping Wheel Hexes (2) Axle Pins (2) Hex Screws A race-ready wheel mounting upgrade built for strength, precision, and consistent performance. 🏁  

Read more less

Commemorate Team Losi Racing’s IFMAR World Championship with the official TLR World Champion Trucker Hat. Built on the iconic Richardson 112 platform, this cap combines premium comfort, durability, and classic trucker styling that has made it one of the most popular hats in the USA. Known for its quality construction and timeless fit, the Richardson 112 features a structured front panel and breathable mesh back, making it perfect for race days, shop time, or everyday wear. With championship-inspired TLR branding, this hat lets you represent winning heritage wherever you go. Features Official TLR World Championship commemorative design Richardson 112 premium trucker cap Structured front with breathable mesh back Classic mid-profile fit Adjustable snapback closure Durable, high-quality construction A clean, race-inspired look that celebrates TLR’s championship legacy while delivering everyday comfort and style. 🏁  

Read more less

Charge Clean. Charge Confident. Upgrade your charging setup with the Team Exalt ProCharge 2S Specialized Charging Cable, designed for precision, durability, and a professional look at your pit station. Built for Junsi iCharger 456/458 Duo chargers, this premium cable ensures a clean, secure, and efficient charge for your 2S LiPo batteries. Professional-Grade Construction Each ProCharge cable is meticulously assembled with 12AWG charge leads and 18AWG balance leads, paired with high-quality XT90 and 5mm bullet connectors for consistent, low-resistance power delivery. A custom braided PET sleeve and self-sealing shrink tubing keep everything neat, organized, and protected from wear. Features: Custom-built 2S ProCharge cable for Junsi iCharger 456/458 Duo XT90 charger connector with 5mm battery bullets 12AWG main leads and 18AWG balance leads for reliable current flow 2mm balance plug to 3-pin XH connector Braided PET sleeve for a clean, professional finish Self-sealing shrink tube ensures durability and neat cable management Reduces pit clutter and promotes safe, organized charging Specifications: Spec Detail Charger Connector XT90 Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt ProCharge 2S Specialized Charging Cable Team Exalt — Professional Power. Cleaner Charging.

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Overview:Introducing the 1up Racing 7075 Aluminum Locknuts (M3) – the ultimate combination of strength, style, and lightweight performance. Precision-crafted from high-quality 7075 aluminum, these locknuts deliver the durability you need while saving weight where it counts. Each nut features a tight-fitting nylon insert that locks in place to keep everything secure, even under extreme R/C racing conditions. Choose from 10 bold anodized colors to match your build’s style and make your ride stand out! Features: Includes 8 locknuts per package Premium 7075 aluminum construction for strength and lightweight performance 5.5mm outer hex for easy installation M3 x 0.5mm threads (fits standard M3 hardware) Nylon lock inserts prevent loosening over time Available in 10 stunning anodized finishes for maximum style Compatibility: Fits most 1/10 and 1/8 scale R/C applications requiring M3 locknuts Perfect for off-road buggies, stadium trucks, touring cars, crawlers, drones, and more

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) [71162] 🚀 Soak up the bumps. Stick the landing. These 13mm Front Shock Springs are built for serious performance on your T6.2 or SC6.2 when upgraded to 13mm shocks. With a 4.80 lb/in rate and 54mm length, they strike the perfect balance—soft enough for buttery-smooth cornering, firm enough to eat up big landings. Upgrade your front-end feel and dial in that confidence. 🔥 Features:✅ Blue rate: 4.80 lbs/in✅ Length: 54mm✅ Perfect for 13mm shocks✅ Great low-speed feel + high-speed support✅ Includes 2 springs 📦 Part Number: 71162🏁 Brand: Team Associated

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Team Associated 10mm Blue Aluminum Shock Bushings (4) – Part 91815Lightweight. Durable. Precision-Tuned. The Team Associated 10mm Blue Aluminum Shock Bushings (91815) are precision-machined replacements designed to improve durability and reduce slop in your shock mounting setup. These aluminum bushings offer a secure, high-performance fit and are a direct upgrade over stock plastic bushings. ✅ Fits 10mm shock mounts on various Team Associated vehicles✅ Machined from lightweight, high-strength aluminum✅ Anodized blue for a clean factory look✅ Improves durability and shock alignment✅ Direct replacement for worn or damaged bushings 📦 Includes: (4) 10mm Blue Aluminum Shock Bushings Part #: 91815 💡 Pro Tip: Swap out plastic bushings with these for a tighter, more responsive suspension feel—especially under race conditions.  

Read more less

🔌⚡ Power Multiple Components with One Reliable Connection The Yeah Racing 60-Core Y-Harness High Current Servo Extension Lead is a durable, high-quality splitter cable designed to power or control two compatible components from a single receiver port. Featuring one male and two female JR/Futaba-style connectors, this 150mm Y-harness is ideal for servos, LEDs, gyros, and other RC electronics. Built with high-strand-count 60-core wire and an injection-molded Y-split protector, it delivers dependable performance while keeping your wiring neat and organized. 🔌 About the High Current Y-Harness ⚡ Built for High Current Applications Constructed with premium 60-core wire, this extension lead supports reliable power delivery and stable signal transmission for demanding RC electronics. 🔧 Split One Connection into Two The Y-harness allows two compatible devices to share a single receiver output, making it ideal for dual servos, lighting systems, gyros, and other accessories. 💪 Durable Molded Construction An injection-molded Y-split protector strengthens the cable at its most vulnerable point while providing a clean, professional appearance. 🧹 Clean & Organized Wiring The 150mm cable length offers flexibility while helping keep wiring tidy inside your RC vehicle, boat, or aircraft. 🔧 Features ✔ One male to two female JR/Futaba-style connectors✔ Premium 60-core wire for high current capability✔ Stable power and signal distribution✔ Injection-molded Y-split protector for added durability✔ Ideal for servos, LEDs, gyros, and other RC electronics✔ Helps maintain clean, organized wiring✔ 150mm cable length✔ Black finish 📦 Includes (1) Yeah Racing 60-Core Y-Harness High Current Servo Extension Lead (150mm) 📊 Specifications Specification Details Connector Type JR/Futaba Style Configuration 1 Male to 2 Female Cable Length 150mm Wire Type 60-Core High Current Wire Color Black 🚗 Compatibility Compatible with RC electronics using JR/Futaba-style servo connectors, including: Servos LED lighting systems Gyros Other compatible receiver-powered accessories Always verify connector type and current requirements before installation. ⚠️ Notes Designed for use with JR/Futaba-style connectors. Ideal for splitting a single receiver output between two compatible devices. Verify that your receiver and power system can safely support the combined current draw of connected accessories before use.

Read more less

  Tape Set Overview:This is a replacement hook & loop tape set designed for securing bodies on Team Losi Racing platforms. It provides a simple and reliable way to mount and hold your body in place. 🔧 Key Features ✔ Hook & loop mounting system✔ Helps secure body panels✔ Easy to apply and replace✔ Direct replacement set 📦 Includes (8) Hook Side Tabs (10x20mm) (8) Loop Side Tabs (10x20mm)

Read more less

A simple, essential pit tool for fast and precise adjustments. The Factory Team Aluminum Turnbuckle Wrench is lightweight, durable, and designed to fit 1/8" turnbuckles, making it perfect for quick setup changes at the track or on the bench. Features & Benefits: Precision aluminum construction Lightweight and durable Fits standard 1/8" turnbuckles Compact size—easy to keep in any pit box A must-have wrench for clean, accurate turnbuckle adjustments when it matters most.  

Read more less

Speed up turnbuckle assembly with the FT Ball Cup Wrench—a must-have tool for racers and builders running the 6-series platform. Designed to grip ball cups securely, this wrench makes assembly quick, easy, and consistent. Features & Benefits: Makes assembling turnbuckles fast and effortless Precision fit for 6-series platform ball cups Hard-anodized finish for durability Laser-etched identification Knurled outer diameter for a comfortable, secure grip Lightweight and compact—perfect for the pit box Compatibility: RC10B6 RC10B6D RC10B64 RC10B64D RC10B6 Club Racer RC10B64 Club Racer Pro Tip: Pair it with the #1114 FT Dual Turnbuckle Wrench for the fastest turnbuckle builds possible.  

Read more less

The JConcepts Metal Car Stand is a premium pit accessory designed for racers who demand stability, durability, and a professional workspace. Built from high-quality aluminum, this stand provides a solid platform for both 1/10 and 1/8 scale vehicles while keeping tires off the ground for maintenance, setup, and storage. Its distinctive JConcepts shape features integrated handle cut-outs for easy transport and laser-etched logos for a clean, race-ready look. Whether you’re wrenching at the track or setting up in the shop, this stand delivers the strength and stability serious racers expect. Features All-aluminum construction for strength and durability Suitable for 1/10 and 1/8 scale RC vehicles Elevated height keeps wheels off the ground Integrated handle cut-outs for easy carrying Laser-etched JConcepts logos Stable, wide-base design for pit or bench use Color Options Gray – Part #2903-8 Yellow – Part #2903-9 Includes (1) JConcepts Metal Car Stand Foam stickies for added grip and protection A must-have pit accessory for racers who want a clean, stable, and professional setup—on race day or in the workshop.    

Read more less

Fine-tune your chassis balance with the Team Associated RC10B6.4 Factory Team Steel ESC Weight. Designed as a factory tuning option, this 33-gram steel weight mounts at the ESC location to help lower the center of gravity and improve on-power stability and overall traction. Originally intended for the RC10B6.4 platform, this weight is also compatible with multiple Team Associated vehicles, making it a versatile tuning upgrade for racers looking to dial in handling on different track conditions. Features Genuine Factory Team tuning component 33g steel construction for precise weight placement Improves balance, stability, and traction Ideal for fine chassis tuning on carpet, dirt, or clay Simple bolt-on installation Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B6.4 Team Associated RC10 B6.4D Includes (1) Factory Team Steel ESC Weight (33g)

Read more less

The Team Losi Racing TLR234132 V2 Adjustable Pivot Insert Set is a replacement and tuning solution for select 22-series and TEN platforms. This updated V2 insert set allows precise adjustment of suspension pivot geometry, giving racers greater control over handling characteristics across a wide range of track conditions. Ideal for maintenance, rebuilds, or expanding setup options on compatible Elite platforms. 🔧 Features Genuine Team Losi Racing replacement and tuning parts V2 adjustable pivot inserts for advanced suspension tuning Enables precise adjustment of pivot geometry Ideal for setup changes, rebuilds, or race-day tuning Direct fit for compatible Losi platforms 📦 Includes (28) Individual Pivot Inserts ✅ Compatibility Losi 22 5.0 Elite Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Upgrade your short course tires with the legendary Dirt-Tech inserts—developed with tire tuning master Brian “Dirt” Kinwald for ultimate consistency, control, and durability on the track. These medium/firm closed-cell inserts use a precision-sculpted profile with strategic outer cuts and 360° inner channels to deliver a cushioned feel, improved impact absorption, and enhanced forward bite. Lightweight, durable, and perfectly contoured, they are the go-to insert for medium to extremely high-traction surfaces. Features: ✔️ Medium/Firm density for stability and high-traction performance✔️ Lightweight closed-cell design✔️ Deep outer cuts for improved tire contact feel✔️ 360° internal channels absorb impacts & boost acceleration✔️ Fits the vast majority of short course tires✔️ Durable material—can be reused✔️ Gray color for easy identification Includes: (2) Dirt-Tech Short Course Closed Cell Inserts  

Read more less

The Yeah Racing 60-Core High Current Servo Extension Wire is built for RC enthusiasts who demand reliable power delivery and signal integrity over longer distances. Perfect for rock crawlers, touring cars, or scale builds with extended chassis layouts, this heavy-duty extension lead ensures stable performance even under high-load conditions. ⚙️ Features: Designed for RC vehicles with remote servo placement 60-core wire construction supports high current servos Compatible with JR and Futaba-style connectors Provides a clean, secure wiring solution for custom builds Durable, flexible insulation resists wear and heat 📏 Specifications: Length: 150mm Connector Type: JR/Futaba Plug Wire Type: 60-core high-current cable 📦 Includes: (1) Yeah Racing 150mm 60-Core High Current Servo Extension Wire    

Read more less

Precision. Strength. Performance.Keep your Team Associated short course or stadium truck performing at its best with these Rear Suspension Arms (71105). Designed for precise geometry and rugged durability, they deliver consistent handling and reliability on the track or in the dirt. Factory Fit. Race Proven.These genuine Team Associated replacement arms fit both left and right sides and are molded from high-strength composite for balanced flex and long-lasting performance. Ideal for racers and bashers alike looking to restore factory handling and suspension response. 💪 Features: Genuine Team Associated replacement parts High-strength composite material for durability and consistent flex Factory geometry for precise suspension movement Direct fit for multiple RC10 platforms Includes left and right arms 📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ✅ Compatibility: Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Team Associated RC10 T6.1  

Read more less

Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty – High-Performance, Low-Profile Power! Maximize your racing potential with the Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo, engineered with cutting-edge advancements in LiPo cell manufacturing and battery construction. Designed for elite on-road and off-road competition, this battery delivers higher power output, lower internal resistance, and increased durability, ensuring consistent voltage from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Improves efficiency, reliability, and power output.✅ High-Voltage (HV) 7.6V Design – Safely charges to 4.35V/cell for maximum performance.✅ Flat Discharge Curve – Sustains higher voltage deeper into the race for consistent power delivery.✅ High Capacity & 135C Discharge Rate – Delivers explosive acceleration and extended runtime.✅ Durable Hard Case – Protects against damage in high-impact racing environments.✅ Low-Resistance Embedded Connectors – Minimizes power loss for peak efficiency.✅ ROAR & BRCA Approved – Legal for competitive racing.✅ Male ESC Connectors Included – Ensures plug-and-play compatibility. Precision Power for Competitive Racing! 🏁 Why Choose the Reedy Zappers SG6 4000mAh? Low-profile (LP) design for better weight distribution and improved handling. Higher voltage retention throughout the race ensures stronger acceleration and consistent performance. Ideal for both on-road & off-road racing, including 1/8 eBuggy and 1/10 scale competition. Proven durability and extended cycle life for long-lasting, race-winning performance. 🔥 Race with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4000mAh Voltage: 7.6V (2S) Max Charge Rate: 8.0A Discharge Rate: 135C Dimensions: 95.8mm x 46.8mm x 18.5mm Weight: 162g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4000mAh 135C LP Shorty is designed for racers demanding high-voltage, low-profile performance. Whether you're competing in tight indoor tracks or wide outdoor circuits, this power-dense battery delivers the speed, consistency, and durability needed to win. 🔥 Upgrade your setup today and experience next-level power with Reedy Zappers SG6! 🏁💨

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated RC10B6.4 Factory Team Angled Top Plate & Ballstud Mount (Carbon) [71183]🔧 Lighter. Stiffer. Tuned for Victory.Upgrade your RC10SC6.4 or RC10T6.4 with this Factory Team Angled Top Plate & Ballstud Mount made from ultra-rigid carbon composite. Designed for racers who demand precision and tuning flexibility, this lightweight mount gives your rig an edge on varying track surfaces. 💥 Features:✅ Lightweight carbon composite for reduced flex and added durability✅ Angled design offers enhanced tuning options✅ Factory Team quality – built for performance✅ Ideal for RC10SC6.4 and RC10T6.4 platforms✅ Includes: (1) Top Plate & Ballstud Mount📦 Part Number: 71183🏁 Brand: Team Associated

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated Rear Hubs Set – RC10B74.1 OEM Replacement for Precision Rear-End Handling The ASC92267 Rear Hubs are a direct replacement for the Team Associated RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built to factory specs, these hubs restore precise suspension geometry and consistent rear-end performance. ⚙️ Features: 🏁 Genuine Team Associated replacement part 🛠️ Maintains proper rear toe and camber link geometry 💪 Durable molded construction for reliable wear resistance 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Stay dialed and race-ready—replace worn or damaged hubs with confidence.  

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

Protect the rear of your truck with the Team Associated RC10SC7 Rear Bumper Set, designed as a direct replacement for the RC10SC7 platform. This durable bumper helps absorb impacts and protects the chassis and body during aggressive racing and bashing. Built for proper fit and easy installation, this rear bumper restores protection and keeps your truck race-ready. 🔧 Features:• Direct replacement for RC10SC7• Helps protect chassis and body from rear impacts• Durable composite construction• Easy installation with factory fit• Ideal replacement for worn or damaged bumpers 📦 Includes:• (1) Rear Bumper Set ⚙️ Specifications:• Position: Rear• Vehicle Type: Short Course Truck ✅ Compatibility:• Team Associated RC10SC7      

Read more less