Refresh your drivetrain with the Factory Team DCV (Dual CVA) Rebuild Kit. Designed to restore smooth power delivery, this kit includes all the small but critical parts needed to service and maintain your dual CVA driveshafts for long-lasting, race-ready performance. 🔥 Key Features: Complete rebuild kit for Factory Team Dual CVA driveshafts Restores smooth, efficient drivetrain operation Precision parts built to Team Associated factory standards Extends the life of your DCV driveshaft assemblies Essential maintenance item for serious racers ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series RC10B6D / B6.1D / B6.2D / B6.3D SC6.1 / SC6.2 T6.1 / T6.2 Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws (2) O-Rings ⚠️ Tip:Inspect DCV components regularly—replace worn barrels and pins early to prevent axle or bone damage.

Read more less

Keep your suspension smooth and precise with the Team Associated Hinge Pin Set. Designed to replace worn or bent pins, this complete set provides the exact lengths and diameters needed for secure suspension arm mounting and consistent handling. 🔥 Key Features: Factory-spec hinge pins for suspension arm pivots Hardened steel construction for strength and durability Direct replacement for stock pins Maintains correct suspension geometry Essential maintenance item for serious racers ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series RC10B6D / B6.1D / B6.2D / B6.3D SC6.1 / SC6.2 T6.1 / T6.2 Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) 📦 Includes: Complete set of front and rear hinge pins (various lengths) ⚠️ Tip:Always check hinge pins after crashes—bent pins can cause binding and poor handling. Replace as needed to keep suspension moving freely.

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 13mm Rear Shock Spring (Green/2.20lbs) (72mm) [71163]🌿 Smooth rides, soft landings!Upgrade your T6.2 or SC6.2 with the 13mm Rear Shock Springs in Green (2.20 lbs/in). These 72mm springs are tuned for plush low-speed movement and firm high-speed impact absorption — ideal for maintaining grip while taming big jumps.💥 Features:✅ Green rate: 2.20 lbs/in✅ Length: 72mm✅ Engineered for 13mm shocks✅ Perfect balance of cushion and control✅ Includes 2 springs📦 Part Number: 71163🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring (White/4.40lbs) (54mm) [71160]🛠️ Tuned for precision. Built for performance.Upgrade your T6.2 or SC6.2 with these 13mm Front Shock Springs and feel the difference! Rated at 4.40 lbs/in and measuring 54mm, these white springs deliver buttery-smooth handling with serious jump support. Soft in the corners, firm on impact—just how you want it.💥 Features:✅ White rate: 4.40 lbs/in✅ Length: 54mm✅ Designed for 13mm shocks✅ Optimized for balance between grip and control✅ Includes 2 springs📦 Part Number: 71160🏁 Brand: Team Associated

Read more less

Team Associated T6.1/SC6.1 Front Anti-Roll Bar Set [71128] 🌀 Dial in your handling with confidence! This Front Anti-Roll Bar Set is designed for the Team Associated T6.1 and SC6.1, helping reduce chassis roll and boost stability when the grip is high and the corners are tight. Whether you're fine-tuning for race day or upgrading for performance, this set has your front-end covered. ✅ Reduces chassis roll on high-traction tracks✅ Improves cornering response and overall stability✅ Works with Roll Bar Hardware Set ASC71134 (sold separately) Includes:• (1) 1.2mm White Front Anti-Roll Bar• (1) 1.3mm Gray Front Anti-Roll Bar• (1) 1.4mm Blue Front Anti-Roll Bar 📦 Part Number: 71128🏁 Brand: Team Associated

Read more less

🏁⚡ Limited-Edition Team-Tuned SPEC Racing Motor The Hobbywing SPEC Brushless Motor Team Tuned [TT] Limited Edition is a specially prepared 21.5T competition motor built for racers looking for professionally tuned stock-class performance. Based on Hobbywing's proven G4R platform, each Team Tuned motor is individually inspected and assembled using the same techniques applied to Hobbywing team race motors used in World and National Championship competition. This limited-edition version features a non-epoxy stator designed to comply with updated ROAR rules regarding epoxy usage and comes equipped with a high-torque tuning rotor. 🏎️ About the Team Tuned [TT] Motor 🔧 Team Tuned Preparation Each TT motor is inspected and assembled by Hobbywing's Matthew Gonzales using the same preparation techniques applied to Hobbywing team race motors. This additional attention to assembly and setup is intended to provide racers with a competition-focused motor straight out of the package. 💪 High-Torque Rotor A high-torque tuning rotor comes pre-installed, giving the motor a torque-focused configuration without requiring racers to purchase and install the rotor separately. 🏁 ROAR-Oriented G4R Platform The TT Limited Edition is based on the Hobbywing G4R motor but uses a non-epoxy stator to meet updated ROAR regulations regarding stator epoxy usage. 🔧 Features Limited-edition Team Tuned [TT] competition motor 21.5T SPEC racing configuration Based on the Hobbywing G4R platform Individually inspected and assembled Prepared using Hobbywing team motor techniques Non-epoxy stator Designed around updated ROAR epoxy regulations High-torque tuning rotor pre-installed Competition-focused stock/spec racing motor 📦 Includes (1) Hobbywing SPEC Team Tuned [TT] Limited Edition Brushless Motor – 21.5T 📊 Specifications Specification Details Part Number 30401747 Series Team Tuned [TT] Limited Edition Motor Platform Hobbywing G4R Turns 21.5T Motor Type Brushless Configuration Team Tuned Stator Non-Epoxy Rotor High-Torque Tuning Rotor Application SPEC / Stock Racing ⚠️ Notes This is a limited-edition Team Tuned G4R-based motor, not the newer G5 platform. The supplied product information specifically identifies this version as 21.5T TT. The non-epoxy stator was incorporated to address updated ROAR rules regarding epoxy usage. Availability may be limited due to the special Team Tuned production run.    

Read more less

🏁⚡ High-RPM Competition Performance for 13.5T Stock Racing The Hobbywing XeRun V10 G5 Competition Stock 13.5T Speed Brushless Motor is engineered for racers looking for maximum speed and efficiency from their stock-class power system. The fifth-generation V10 platform delivers increased output power, improved thermal performance, optimized weight distribution, and extensive tuning capability for serious competition use. This Speed configuration is designed to favor higher-RPM performance and top-end power, making it particularly well suited to larger, faster layouts where carrying speed and maximizing straightaway performance are critical. 🏎️ About the XeRun V10 G5 🚀 13.5T Speed Performance Rated at 4000Kv, the Speed version of the 13.5T G5 is designed to emphasize RPM and top-end performance. Compared with the Torque configuration, it's an excellent choice for racers competing on faster layouts where maintaining momentum and maximizing speed are priorities. 🎯 Advanced Tunability Adjustable Hall timing and Hall sensing distance allow racers to fine-tune the motor's throttle response and power characteristics. This additional adjustability makes it possible to optimize performance around gearing, ESC settings, track conditions, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 motor structure improves heat dissipation and overall efficiency compared with the previous generation. Its lightweight construction and optimized center of gravity also help reduce unnecessary weight while maintaining consistent performance throughout demanding race conditions. 🔧 Modular Construction A modular design makes servicing and maintenance easier, helping racers keep the motor operating at peak performance throughout the racing season. 🔧 Features Competition-spec 13.5T sensored brushless motor Speed configuration for high-RPM performance 4000Kv rating Increased output power over the previous generation Improved efficiency and thermal performance Lightweight design with optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Advanced cooling design with improved heat dissipation Modular construction for easier maintenance 2-pole competition motor design Designed for 2S operation 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 13.5T Speed (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401762 Motor Series XeRun V10 G5 Version Speed Motor Type Sensored Brushless Turns 13.5T Kv Rating 4000Kv Input Voltage 2S Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 13.5T stock-class 1/10-scale racing, particularly on medium-to-large layouts where higher RPM and top-end speed are preferred. ⚠️ Notes This is the Speed version of the 13.5T XeRun V10 G5. The Speed version is rated at 4000Kv, compared with 3900Kv for the 13.5T Torque version (30401763). For tighter, more technical layouts where acceleration is the priority, consider the Torque version. Always verify your racing organization's motor regulations before competition use.    

Read more less

🏁⚡ Competition Stock Power with Torque-Focused Performance The Hobbywing XeRun V10 G5 Competition Stock 13.5T Torque Brushless Motor delivers the latest generation of Hobbywing stock racing performance. Developed to the same demanding standards as Hobbywing's team competition motors, the G5 offers increased output power, improved efficiency, better thermal performance, and optimized weight distribution compared to the previous generation. The Torque configuration emphasizes strong acceleration and responsive power delivery, making it an excellent choice for racers who need punch coming out of corners and consistent performance on technical layouts. 🏎️ About the XeRun V10 G5 💪 13.5T Torque Performance Rated at 3900Kv, this 13.5T Torque version provides a strong combination of speed and acceleration for competitive stock racing. Hobbywing offers the G5 in both Speed and Torque configurations, allowing racers to choose a motor better suited to their track layout, available grip, and preferred power delivery. 🎯 Advanced Tunability Adjustable Hall timing and Hall sensing distance give racers greater control over the motor's characteristics. These adjustments allow the motor to be fine-tuned for throttle response and power delivery based on gearing, ESC settings, track conditions, and driving style. ❄️ Improved Cooling & Efficiency The redesigned G5 structure provides improved heat dissipation and efficiency to help maintain consistent performance throughout a race. Its lightweight construction and optimized center of gravity also help reduce unnecessary weight while keeping mass properly positioned in the chassis. 🔧 Modular Construction A modular design makes routine maintenance and servicing easier, allowing racers to keep the motor in peak condition throughout the racing season. 🔧 Features Competition-spec 13.5T sensored brushless motor Torque configuration for strong acceleration and punch 3900Kv rating Increased output power over the previous generation Improved efficiency and thermal performance Lightweight design with optimized center of gravity Adjustable Hall timing system Adjustable Hall sensing distance Available in Speed and Torque configurations Advanced cooling design for improved heat dissipation Modular construction for easier maintenance 2-pole competition motor design 📦 Includes (1) Hobbywing XeRun V10 G5 Competition Stock Brushless Motor – 13.5T Torque (1) Sensor Cable 📊 Specifications Specification Details Part Number 30401763 Motor Series XeRun V10 G5 Version Torque Motor Type Sensored Brushless Turns 13.5T Kv Rating 3900Kv Input Voltage 1–3S Pole/Slot 2 Motor Length 2.04in (51.9mm) Motor Diameter 1.41in (35.8mm) Shaft Diameter 1/8in (3.175mm) Weight 4.87oz (138g) 🏁 Application Ideal for 13.5T stock-class racing where strong acceleration and responsive torque delivery are desired, including compatible 1/10-scale off-road racing applications. ⚠️ Notes This is the Torque version of the 13.5T XeRun V10 G5. Hobbywing also offers a Speed version for racers looking for different power characteristics based on track size and grip level. Verify your racing organization's motor and ESC regulations before competition use.    

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

🏁⚡ Reliable High-Current Electrical Connections The ProTek RC 4mm Serrated Male Bullet Connectors are high-quality connectors designed to provide secure, low-resistance electrical connections for a variety of RC applications. Ideal for batteries, motors, and electronic speed controllers, these serrated bullet connectors ensure excellent contact and dependable power transfer. Whether you're building custom battery packs or replacing worn connectors, these ProTek bullets offer the performance and reliability serious RC enthusiasts demand. 🏁 About the 4mm Serrated Bullet Connectors ⚡ Efficient Power Transfer Precision-machined 4mm bullet connectors provide a secure fit and low-resistance connection to maximize electrical efficiency. 🔒 Serrated Design The serrated surface improves contact pressure for a reliable connection that resists vibration and helps maintain consistent power delivery. 🔧 Versatile Applications Perfect for a wide range of RC wiring projects, including: Battery connectors Motor-to-ESC connections Custom wiring setups High-current electrical applications 🔧 Features ✔ High-quality 4mm male bullet connectors✔ Serrated design for improved electrical contact✔ Low-resistance power transfer✔ Ideal for high-current RC applications✔ Great for battery and motor wiring✔ Includes heat shrink tubing for a clean installation 📦 Includes (3) 4mm Serrated Male Bullet Connectors Heat Shrink Tubing 📊 Specifications Specification Details Connector Size 4mm Connector Type Male Design Serrated ⚠️ Notes Suitable for a variety of RC electrical applications. Professional soldering is recommended for the best connection and performance. Package contents include three (3) male bullet connectors, despite some product titles listing two.

Read more less

Hinge Pin Brace Overview:This is a replacement front hinge pin brace designed for Team Associated RC10 platforms. It helps secure the hinge pins and maintain proper suspension alignment. 🔧 Key Features ✔ Replacement front hinge pin brace✔ Helps maintain suspension alignment✔ Supports chassis rigidity✔ Direct fit design 📦 Includes (1) Front Hinge Pin Brace 🚗 Compatibility Team Associated RC10 B7.1 Team Associated RC10 B7.1D Team Associated RC10 SC7 Team Associated RC10 T7 Ideal for replacing worn or damaged components, this brace helps keep your suspension secure and performing consistently.  

Read more less

Protect the rear of your truck with the Team Associated RC10SC7 Rear Bumper Set, designed as a direct replacement for the RC10SC7 platform. This durable bumper helps absorb impacts and protects the chassis and body during aggressive racing and bashing. Built for proper fit and easy installation, this rear bumper restores protection and keeps your truck race-ready. 🔧 Features:• Direct replacement for RC10SC7• Helps protect chassis and body from rear impacts• Durable composite construction• Easy installation with factory fit• Ideal replacement for worn or damaged bumpers 📦 Includes:• (1) Rear Bumper Set ⚙️ Specifications:• Position: Rear• Vehicle Type: Short Course Truck ✅ Compatibility:• Team Associated RC10SC7      

Read more less

Protect your chassis and the track surface with the 1up Racing Reusable CF Look Chassis Skin. Designed with a trick carbon fiber appearance and bold 1up Racing logos, this skin delivers both protection and unmistakable style. Made from heavy-duty vinyl with an extremely tacky adhesive, this chassis skin is built for long life and real-world racing. The adhesive is so effective that the skin can be peeled off and re-applied up to 7–8 times without losing hold. Features & Benefits Protects chassis from wear and damage Helps protect track surfaces Carbon fiber look with bold 1up Racing branding Heavy-duty vinyl construction Reusable adhesive—remove and reapply multiple times Long-lasting, race-proven durability Sizing 14 × 34cm Covers most 1/10 scale vehicles Installation Apply directly to chassis Trim excess material with a hobby knife for a perfect fit For best results, use 1up Racing X-Life #11 Knife Blades A simple, effective way to keep your chassis looking fresh and performing season after season. 🏁  

Read more less

Rolling freely is critical for race-day performance, and the JConcepts Radial NMB Bearing Set is built to meet the demands of elite competition. This complete kit uses NMB stainless steel bearings manufactured to exacting tolerances, delivering smooth rotation, durability, and long service life under hard racing conditions. Designed as a direct-fit replacement, this set restores efficiency, reduces drivetrain drag, and helps keep lap times consistent from the first heat to the mains. Features & Benefits: High-quality NMB stainless steel bearings Precision tolerances for smooth, efficient rotation Durable construction for long-lasting performance Reduces friction and improves drivetrain efficiency Designed for the rigors of competitive racing Compatibility (Direct Fit): Team Associated B6.4 Team Associated B6.4D Team Associated T6.4 Team Associated SC6.4 Includes: Complete radial bearing set for supported models A must-have upgrade or refresh for racers looking to keep their Associated platform rolling smooth and fast.

Read more less

Upgrade your Team Associated RC10B7/B7D with the ultimate lightweight hardware package! The JConcepts Titanium Lower Screw Set is engineered for racers who want maximum strength, precision, and performance. With high-grade titanium construction and brilliant anodized finishes in Blue or Black, this set delivers both style and serious on-track advantages. Each screw is machined to exact tolerances, offering exceptional durability and smoother wrench feel. The low-head FHCS profile keeps weight low and sleek, while the titanium build cuts unnecessary mass from the lower portion of the chassis—improving handling, balance, and acceleration. Every screw is packed in a labeled bag identifying its location on the vehicle, making installation simple and organized. ⭐ Features Premium high-grade titanium construction Reduces overall vehicle weight for improved performance Low-head FHCS design for a clean fit Available in Blue or Black anodized finishes 3mm thread base compatible with RC10B7/B7D platforms Labeled bags for each area of the vehicle for easy installation Increased strength, durability, and long-term reliability 📦 Includes (28) Titanium screws in various sizes Individually labeled bags for chassis locations ⚙️ Compatibility Team Associated RC10B7 Team Associated RC10B7D

Read more less

Precision Performance. Lab-Calibrated Consistency. Keep your shocks performing at their peak with HUDY Ultimate Silicone Oil 400 cSt, the trusted choice of top racers worldwide. Manufactured in Europe by HUDY’s premium silicone specialists, this oil is laboratory tested and calibrated to deliver unmatched consistency, batch after batch. Whether you’re tuning for off-road stability or on-road precision, HUDY’s 400 cSt oil provides the perfect balance of damping and responsiveness for smooth, predictable handling. Race-Ready Quality HUDY oils use the industry-standard cSt rating for easy identification and setup changes. The 400 cSt blend sits in the light-to-medium viscosity range, making it ideal for shock applications where precise damping is key. Each oil type is color-coded for instant recognition and faster pit work. Features: Premium-grade silicone oil manufactured in Europe Lab-tested for precision and batch consistency 400 cSt viscosity — perfect for shock tuning cSt-rated for easy setup adjustments Color-coded labeling for quick identification Trusted by professional racers worldwide Specifications: Viscosity: 400 cSt Volume: 100 ml bottle Product Code: 106341 HUDY Ultimate Oils — Consistency You Can Feel.    

Read more less

Heavy-duty charge lead for Junsi iCharger 456DUO and other XT90-input chargers Overview:The ProTek RC 2S High Current Charge/Balance Adapter is built for racers who demand maximum efficiency and reliability when charging at high amperage. Designed specifically for Junsi iCharger 456DUO users—and ideal for any charger using XT90 inputs—this cable delivers ultra-low resistance and premium performance for modern high-power LiPo packs. About the High Current Charge/Balance Adapter Built for Serious Power HandlingThis adapter features gold-plated 5 mm bullets for secure, low-loss battery connection and a female XT90 connector for the charger side, ensuring stable current transfer even during extreme charge or discharge cycles. The 10 AWG high-strand wire provides the heavy-duty conductivity needed for charging at higher-than-average amp rates without voltage drop or excess heat. Clean, Tangle-Free DesignThe 24-inch coiled jacket keeps your pit area organized and the cable flexible, while reducing tangling during setup or transport. A 7-pin XH balance connector provides easy balancing for 2S and higher cell count packs—making this a truly versatile, professional-grade charging lead. Features: Designed for Junsi iCharger 456DUO and other XT90-input chargers 5 mm gold-plated bullets for secure battery connection 10 AWG high-strand wire handles extreme current demands Female XT90 connector ensures solid charger connection 7-pin XH balance plug supports up to 6S balancing 24" (61 cm) coiled jacket for flexibility and a tangle-free workspace Low resistance design for maximum charge performance Specifications: Specification Details Wire Gauge 10 AWG Length 24" (61 cm) Charger Connector Female XT90 Battery Connector 5 mm Gold-Plated Bullets Balance Connector 7-Pin XH (Up to 6S) Compatibility Junsi iCharger 456DUO / 458DUO, XT90-input chargers Includes: (1) 2S High Current Charge/Balance Adapter Cable

Read more less

Compatible with iCharger 456DUO, 458DUO, and iSDT Chargers Overview:The TQ Wire XT90 2S Charge Cable is built to handle high-power charging applications with maximum efficiency and reliability. Designed specifically for use with Junsi iCharger 456DUO and 458DUO, this premium cable provides a secure connection between your charger and LiPo batteries equipped with 4mm or 5mm bullet connectors. About the XT90 2S Charge Cable Heavy-Duty Design for High Power ChargingFeaturing an XT90 connector for the charger side and stepped 4mm/5mm bullets for the battery side, this cable is ideal for high-current setups where performance and safety are critical. The stepped bullet design ensures wide compatibility with various LiPo battery packs while maintaining a tight, low-resistance connection. Built from 12-gauge high-strand wire, the cable provides excellent current flow and flexibility. The length of 2 feet (610mm) offers convenience for bench setups without cluttering your workspace. Wrapped in durable black nylon mesh, it’s both tough and clean-looking—ready for the pits or workshop. Features: XT90 connector for secure charger connection 4mm & 5mm stepped bullets for wide battery compatibility Designed for Junsi iCharger 456DUO and 458DUO 12 AWG high-strand wire for maximum current efficiency 2-foot length for optimal reach and organization Durable black nylon mesh wrap for protection and aesthetics Plug-and-play reliability for professional or hobby use Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT90 Battery Connectors 4mm & 5mm Stepped Bullets Compatibility iCharger 456DUO, 458DUO, iSDT, and XT90-equipped chargers Includes: (1) XT90 2S Charge Cable with 4mm & 5mm Bullet Connectors

Read more less

Protect your workspace and make every cut count with the Excel Self-Healing Cutting Mat. Designed for hobbyists, crafters, and designers, this 18x24" mat features a self-healing surface that absorbs cuts from sharp tools, preserving the mat and extending its life. With a 1" grid pattern for precise alignment and durable flexible PVC construction, it’s a must-have for any serious project bench. 🟢 Key Features: Self-healing surface absorbs cuts and retains smoothness 1" grid pattern ensures accurate cuts and measurements Protects your workspace from blade damage Made from high-quality flexible PVC for long-term use Ideal for hobby, craft, design, and modeling projects 📐 Specifications: Size: 18" x 24" Material: Flexible PVC Color: Green Includes: (1) Cutting Mat 🛠️ A reliable, precision-friendly surface for every sharp project you take on.

Read more less

Team Associated RC10B74.1 Factory Team Aluminum Rear Hubs (Blue or Black) – 92270 / 92271Upgrade your B74.1 with these precision-machined Factory Team aluminum rear hubs! Whether you're after the slick anodized blue or stealthy black finish, these hubs deliver durability, style, and performance. Designed with dual set screws to eliminate play and keep your rear end locked in during intense racing action. Compatible with a wide range of Associated platforms including B74.1, B74.1D, T6.2, and SC6.2. ✔️ Available in Blue (92270) or Black (92271)✔️ CNC aluminum with laser-etched FT logo✔️ Dual set screw design for rock-solid mounting✔️ Direct replacement for ASC92267 hubs✔️ Fits multiple Associated platforms✔️ Weight: 8.5g each Built for racers who demand strength and consistency. 💪  

Read more less

Team Associated 13mm Rear Shock Spring (White/2.35lbs) (72mm) [71164]⚪ Land smoother. Drive sharper.These 13mm Rear Shock Springs in White (2.35 lbs/in) are made to fine-tune your T6.2 or SC6.2 suspension. Designed for 13mm shocks, they offer plush bump absorption with enough support for high-speed landings — exactly what you need for race-ready handling.💥 Features:✅ White rate: 2.35 lbs/in✅ Length: 72mm✅ Optimized for 13mm shock upgrades✅ Soft on bumps, strong on landings✅ Includes 2 springs📦 Part Number: 71164🏁 Brand: Team Associated

Read more less

Team Associated RC10 Factory Team 0.71 Gold Shock Shafts (2)PART: 6418 Team Associated RC10 Factory Team 0.71 Gold Shock Shafts are premium replacements designed specifically for the original RC10. These gold-coated shafts provide smooth performance and enhanced durability, ideal for restoring or upgrading your vintage racer. Includes: (2) 0.71 Gold Shock Shafts Compatibility: Team Associated RC10 (Original)    

Read more less

Team Associated 12mm Heavy Duty Ballstud Set (8) – Part 91050Maximum Strength. Extended Reach. Race Proven. The Team Associated 12mm Heavy Duty Ballstud Set (91050) is a direct replacement for SC10 4x4, B5, B5M, and other compatible platforms. With a longer 12mm thread length, these ballstuds are ideal for use in high-stress suspension and steering locations where extra bite and thread engagement are needed. ✅ Set of 8 heavy-duty 12mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and more✅ Extra length (12mm) – for deeper mounting and improved strength✅ Precision-machined for smooth articulation and ball cup fit✅ Perfect for tuning camber links, steering arms, and shock setups 📦 Includes: (8) 12mm Heavy Duty Ballstuds Part #: 91050 💡 Pro Tip: Use longer ballstuds in plastic mounts or when adding spacers to maintain thread engagement and strength.

Read more less