Built for Power. Made to Last. Upgrade your drivetrain with the Traxxas 32P Steel Spur Gear (47T) — the ultimate strength upgrade for your Mini Maxx® or Mini Slash®. Designed to handle the extreme torque and high-RPM abuse these trucks are known for, this precision-machined steel spur gear replaces the stock composite version for superior durability and smoother power transfer. Stronger Power Transfer When big power meets lightweight plastic, something has to give — and it won’t be this gear. Crafted from high-grade steel, this spur gear keeps your drivetrain tight and efficient under heavy acceleration, hard landings, and high-speed runs. The direct-fit design maintains the original gearing setup, ensuring seamless compatibility while delivering maximum reliability for demanding bashers and racers. Features: Made from premium steel for maximum durability Handles extreme torque and power loads Same tooth count (47T) as stock for direct fit Smooth, efficient power transfer under stress Drop-in replacement for the factory composite gear Perfect for high-performance Mini Maxx® and Mini Slash® builds Includes: (1) 32P Steel Spur Gear (47T) Compatibility: Traxxas Mini Maxx® Traxxas Mini Slash® Traxxas Tough — Steel Strength for Real Power.

Read more less

Tuned Traction. Tougher Drivetrain. Upgrade your Mini Maxx® or XRT™ for smoother handling and superior control with the Traxxas Assembled Center Differential Set. Designed for drivers who demand precision and durability, this fluid-filled, fully sealed differential replaces the stock direct-drive system to deliver better traction, improved cornering, and enhanced drivetrain protection — even under extreme power. Precision-Tuned Power Transfer Built with a steel output gear, heavy-duty steel shaft, and a sealed differential housing, this upgrade allows you to fine-tune your setup by adjusting the diff fluid to match your surface and driving style. Whether you’re racing or bashing, it keeps your truck planted, predictable, and running smoother than ever. Features: Boosts drivetrain durability under extreme power Enhances handling for smoother, more controlled performance Tunable design — adjust fluid for custom traction balance Strong steel output gear and reinforced steel shaft Sealed housing keeps fluid clean and maintenance low Fully assembled and ready to install Includes: (1) Complete Assembled Center Differential Set Note: Requires Center Driveshaft (TRA10757) Requires Pinion Gear (TRA10762) Compatibility: Traxxas Mini Maxx® Traxxas Mini XRT™ Traxxas Tough — Precision Power You Can Tune.  

Read more less

Smooth Power. Lightweight Strength. Upgrade your drivetrain with the Traxxas Composite Center Driveshaft, engineered for Mini Maxx® and XRT™ platforms equipped with the optional slipper clutch (TRA10760) or center differential (TRA10758). This precision-molded composite shaft delivers efficient, reliable power transfer while keeping overall weight low for improved acceleration and handling. Durable & Efficient Design Made from high-strength composite material, this center driveshaft provides long-lasting durability and smooth drivetrain performance. It’s designed for easy installation and precise fitment, making it the ideal upgrade or replacement when adding a slipper or center differential to your Mini Maxx or XRT. Features: High-strength composite construction for lightweight durability Optimized for slipper clutch or center diff setups (sold separately) Ensures smooth and efficient power transfer Direct-fit design for easy installation Genuine Traxxas factory precision Includes: (1) Composite Center Driveshaft Compatibility: Traxxas Mini Maxx® (with slipper clutch or center differential) Traxxas XRT™ (with slipper clutch or center differential) Traxxas Tough — Engineered for Smooth Power.  

Read more less

Launch hard. Land smooth.Keep your Mini Maxx® or XRT™ under control with the Traxxas Wheelie Bar, built from the toughest composite material Traxxas offers. Designed to handle brutal acceleration and big-air landings, this wheelie bar keeps your truck planted while absorbing impacts like a pro. Its flexible design prevents backflips under full-throttle launches and cushions harsh touchdowns. Plus, the integrated carry handle makes it easy to grab and go when it’s time for the next bash session. 💪 Features: Prevents backflips during full-throttle acceleration Durable composite construction for extreme impact resistance Flexible design absorbs hard landings Convenient built-in handle for easy transport Available in multiple color options 📦 Includes: (1) Traxxas Mini Maxx® / XRT™ Wheelie Bar (Black)    

Read more less

Traxxas 10743 Aluminum Bellcrank Assembly – Precision Steering. Aluminum Tough.Choose Your Color: Gray, Red, Orange, Blue, or Green Dial in your steering with the Traxxas Aluminum Bellcrank Assembly. CNC-machined from 6061-T6 aluminum and anodized in bold color options, this upgrade gives your steering system pro-level precision, strength, and smooth response under pressure. ✅ CNC 6061-T6 aluminum construction – ultra-rigid, zero-flex feel✅ Anodized in five high-impact colors – Gray, Red, Orange, Blue, Green✅ Includes drag link + full stainless & bearing hardware✅ Pre-threadlocked fasteners – ready to install✅ Dual ball bearing support – buttery-smooth motion 📦 Complete Kit Includes: Aluminum steering bellcranks & drag link (dark titanium finish) (2) 3x13mm SS screws (with threadlock) (2) 3x12mm button-head cap screws (with threadlock) (1) 3x15mm button-head cap screw (with threadlock) (2) 5x8x2.5mm ball bearings (2) 5x10x4mm ball bearings 💡 Pro Tip: Pair with aluminum servo horns and tie rods for a fully upgraded front-end feel.  

Read more less

🚙🎨 Fresh Look. Factory Fit. Choose Your Style. Upgrade or replace your Mini Maxx® body with genuine Traxxas options. Whether you want a ready-to-run pre-painted finish or a customizable ProGraphix® design, this listing gives you the flexibility to choose the perfect look for your build. 🏁 About These Bodies 🎨 Two Style Options Pre-Painted BodiesReady to install right out of the box with factory-applied color and graphics—perfect for quick upgrades or replacements. ProGraphix® BodyFeatures pre-printed graphics with a clear base, allowing you to add your own paint color for a fully custom finish. 🔧 Key Features ✔ Genuine Traxxas replacement bodies✔ Direct fit for Mini Maxx® platform✔ Available in pre-painted or ProGraphix® styles✔ Factory-trimmed for easy installation✔ Durable polycarbonate construction✔ Clipless mounting compatibility 📦 Includes (1) Traxxas Mini Maxx® Body (style selected) 🎨 Available Options (Variants) 🟢 Pre-Painted [Insert Color Options Here – Blue, Red, etc.] 🎨 ProGraphix® Clear body with printed graphics (requires paint) 📊 Compatibility Traxxas Mini Maxx® 🧰 Notes ProGraphix® body requires paint for final color Pre-painted bodies are ready to install Vehicle shown in photos is not included 💡 Perfect For ✔ Replacing damaged bodies✔ Custom builds and paint projects✔ Quick visual upgrades  

Read more less

Traxxas Mini Maxx® Brushless 1/16 4WD RTR Monster Truck (Black, Blue, Green OR Orange) w/TQ™ 2.4GHz Radio, Battery & ChargerCompact Size. Maxx Power. All-Out Fun. Truck Overview:Don’t let the 1/16 scale fool you — the Traxxas Mini Maxx® is a pint-sized powerhouse built with real 1/10 scale performance and durability. Featuring the BL-2s™ Brushless System, 4WD drivetrain, and massive Sledgehammer® tires, this truck delivers the same attitude as the full-size Maxx, just in a compact, go-anywhere package. Whether you're new to the hobby or a seasoned basher, the Mini Maxx offers extreme speed, rugged durability, and smart electronics — all in one Ready-to-Race package. It even includes a 3500mAh LiPo battery and USB-C charger to get you ripping right out of the box! Why You’ll Love It:✅ BL-2s™ Brushless Power System – Fast, efficient, and built for hardcore bashing✅ Water-resistant electronics – All-weather ready✅ Modular chassis & Ultra Shocks™ – Tough, tunable, and easy to maintain✅ TQ™ 2.4GHz Radio System – Long-range precision with a comfortable grip✅ Four massive Sledgehammer® tires – Unstoppable traction, anywhere you go✅ Includes Battery + Charger – No extra guessing, just grab and drive! What’s In The Box: (1) Traxxas Mini Maxx® Brushless 1/16 4WD Monster Truck (1) TQ™ 2.4GHz Radio System (1) BL-2s™ Brushless Motor (3300kV) (1) BL-2s™ ESC (1) 2S 3500mAh LiPo Battery w/Traxxas iD® Connector (1) 2-Amp USB-C Battery Charger Maintenance Tools & Manual Needed to Complete: (4) AA Batteries for Transmitter (1) USB-C AC Power Adapter (TRA2912 Recommended) (1) USB-C Cable (TRA2916 Recommended) Tech Specs: Scale: 1/16 Drive: 4WD Length: 13.58in (344.93mm) Width: 9.94in (252.48mm) Height: 5.39in (136.91mm) Wheelbase: 8.66in (219.96mm) Weight: 57.92oz (1642g) Power Source: 2S LiPo (7.4V)

Read more less

Keep your Traxxas Mini Maxx® running strong with these genuine replacement caster blocks. Built to factory specifications, these components restore proper suspension geometry and steering performance after wear or impact damage. Features• Genuine Traxxas replacement part• Durable molded construction for long-lasting performance• Maintains correct front suspension alignment• Direct bolt-on replacement — no modifications required• Finished in black for a clean factory look Vehicle Compatibility• Traxxas Mini Maxx® Includes• (2) Mini Maxx® Caster Blocks Perfect for routine maintenance or getting your Mini Maxx back on the track after a hard bash session.

Read more less

Smooth, Consistent Power Delivery. Keep your Mini Maxx® running at peak performance with the Traxxas 32P Center Differential Composite Spur Gear (47T) — a precision-engineered replacement designed specifically for models equipped with the optional center differential (TRA10760). Crafted from durable composite material, this spur gear ensures smooth, efficient power transfer and reliable operation during intense RC action. Engineered for Performance Built to Traxxas’ exacting standards, this 47T composite spur gear maintains proper gear mesh, reduces drivetrain noise, and provides consistent traction across all surfaces. Ideal for high-speed setups or heavy bashing, it delivers the balance of durability and precision your Mini Maxx deserves. Features: High-strength composite construction for long-lasting durability 47T, 32-pitch gearing for smooth, efficient performance Direct replacement for center differential–equipped models Maintains perfect gear mesh and drivetrain balance Genuine Traxxas factory fit and quality Includes: (1) 32P Composite Spur Gear (47T) Note: Does not fit standard center driveshaft setups Requires optional Center Differential (TRA10760) Compatibility: Traxxas Mini Maxx® (with optional center differential) Traxxas Tough — Smooth Power. Maximum Performance.

Read more less

Traxxas Mini Maxx® Clear Body Kit (10711) – Frame, Fit & Finish! Customize Your Mini Maxx Like a Pro.This clear, clipless-mount body kit is the perfect canvas to personalize your Traxxas Mini Maxx. Everything you need is included for a clean install and pro-level style: ✅ Crystal-clear polycarbonate shell – ready for your custom paint job✅ Pre-cut window masks – get sharp, precise lines every time✅ Full decal sheet – add authentic Traxxas flair✅ Front & rear body latches + mounting hardware – plug-and-play convenience✅ Clipless mounting design – modern, sleek fit without traditional body clips Designed specifically for the Mini Maxx platform, this body kit (part 10711) ensures a perfect match and factory-level performance. Whether you’re racing or customizing your ride, this shell delivers both function and flair. 🛠️ What You’re Getting: Clear polycarbonate body Window masks Decal sheet Front/rear latches + hardware 🎨 What You’ll Do: Paint to match your style Install decals & masks Snap it onto your chassis with no clips Customize. Race. Repeat. Let me know if you'd like me to tailor it for a specific channel (like Facebook or Google), or drop your next product when you're ready!

Read more less

Restore quick, secure body mounting on your Mini Maxx with the Traxxas Clipless Body Mount Latches Set. This genuine replacement set keeps your body locked in place while allowing fast, tool-free removal for battery changes and maintenance. Features & Benefits: Genuine Traxxas replacement parts Maintains secure clipless body mounting Allows quick, tool-free body removal Durable construction for repeated use Compatibility: Traxxas Mini Maxx® Includes: (2) Clipless body mount latches Perfect for repairs or spares to keep your Mini Maxx body fitting tight and functioning like new.  

Read more less

Keep your drivetrain running smooth and reliable with the Traxxas Mini Maxx® Composite Center Driveshaft. This genuine replacement part is designed specifically for the Mini Maxx platform, providing durable power transfer from the motor to the driveline. Built from tough composite material, this center driveshaft helps absorb impacts and reduce drivetrain shock while maintaining efficient performance during hard driving and bashing. Features & Benefits: Genuine Traxxas replacement part Durable composite construction for strength and resilience Maintains smooth, reliable drivetrain operation Direct replacement for kit-supplied center driveshaft Compatibility: Traxxas Mini Maxx® Includes: (1) Composite center driveshaft Ideal for repairs, rebuilds, or keeping a spare on hand to keep your Mini Maxx ripping without interruption.    

Read more less

⚙️🔧 Restore Performance. Reliable Replacement. Built for Durability. Keep your drivetrain running smooth with the Traxxas Mini Maxx® Differential Gear Set. Designed as a direct replacement, this gear set restores proper differential function and helps maintain consistent power delivery. 🏁 About This Gear Set 🔄 Direct Replacement Fit Engineered specifically for Mini Maxx®-based platforms, this set installs easily to replace worn or damaged differential gears. ⚙️ Smooth & Reliable Operation Helps maintain balanced power distribution and consistent drivetrain performance across a variety of terrain conditions. 🛠️ Essential Maintenance Part Perfect for rebuilding your differential and extending the life of your vehicle. 🔧 Key Features ✔ Genuine Traxxas replacement part✔ Designed for Mini Maxx® platform✔ Restores smooth differential operation✔ Durable construction for long-lasting use✔ Ideal for maintenance and repairs 📦 Includes (1) Differential Gear Set 🚗 Compatibility Traxxas Mini Maxx® Traxxas Mini Rally VXL Traxxas Mini Slash Traxxas Mini XRT  

Read more less

Keep your Mini Maxx protected and ready for anything with the Traxxas Front & Rear Bumper Set. Designed as a direct replacement, these bumpers absorb impacts and help protect critical components during hard bashing sessions. 🛡️ Maximum Impact Protection Built to take hits so your truck doesn’t, these bumpers help: Absorb front and rear impactsProtect chassis and suspension componentsReduce damage from crashes and collisions Perfect for aggressive driving and high-speed runs. ⚙️ Factory Fit & DurabilityGenuine Traxxas OEM replacementEngineered specifically for the Mini Maxx platformDurable construction for repeated impactsQuick and easy installation with stock hardware⚡ FeaturesFront and rear bumper protectionHelps prevent damage to key componentsDurable, impact-resistant designClean black finishDirect bolt-on replacement📦 Includes(1) Front Bumper(1) Rear Bumper🔧 CompatibilityTraxxas Mini Maxx  

Read more less

Traxxas Front Shock Tower – Engineered to Toughen Your Ride Stiffen Up Your Front End.This Traxxas Front Shock Tower delivers rugged support and precision protection for your RC rig. Designed to withstand intense landings and off-road abuse, it keeps your front shocks aligned and ready for action. ✅ Exact OEM fit – attaches seamlessly to Traxxas chassis✅ Durable material – high-strength plastic resists flex and shock✅ Optimized geometry – supports stable handling and consistent suspension travel✅ Bolt-on installation – simple replacement with stock hardware✅ Ideal for bashers & racers – durable under pressure Why it matters: Prevents shock misalignment for smoother handling Reinforces chassis structure after crashes or upgrades Maintains proper suspension geometry during rough runs 🔧 Installation note: Use existing front shock hardware and mounting holes—no need for modifications.

Read more less

Bulkhead Overview:This is a replacement front upper and lower bulkhead set designed for Traxxas Mini platform vehicles. It provides structural support for the front suspension and drivetrain components. 🔧 Key Features ✔ Replacement front bulkhead set✔ Includes upper and lower sections✔ Supports suspension and drivetrain components✔ Maintains proper front-end alignment✔ Direct fit design 📦 Includes (1) Front Upper & Lower Bulkhead Set 🚗 Compatibility Traxxas Mini Maxx Traxxas Mini Rally VXL Traxxas Mini Slash Traxxas Mini XRT Ideal for replacing damaged components, this bulkhead set helps restore strength, alignment, and durability to your front end.    

Read more less

Smooth. Strong. Stunning.Upgrade your Traxxas Mini Maxx® with precision-engineered GTR PTFE Aluminum Long Shocks — delivering race-level performance, silky-smooth damping, and a bold anodized finish that looks as good as it performs. Engineered for Ultimate ControlEach shock features a hard-anodized aluminum body with a PTFE coating to minimize friction and deliver consistent damping. Oversized bores hold more oil for stable performance on rough terrain, while Titanium Nitride (TiN)-coated shafts ensure ultra-smooth movement and long-term durability. With threaded bodies and adjustable collars, tuning ride height and spring preload is effortless. X-ring seals keep dirt out, and clamping-style retainers keep the springs locked in place, even during extreme bashing. 💪 Features: Hard-anodized aluminum shock bodies PTFE coating for ultra-low friction damping TiN-coated shafts for smooth, wear-resistant performance Large-bore design holds more shock oil Threaded bodies for easy ride-height adjustment X-ring seals keep dirt and debris out Clamping retainers prevent spring pop-off Pre-assembled with oil and springs included Available in Gray, Orange, Blue, Green, or Red 📦 Includes: (4) Mini Maxx® GTR PTFE Aluminum Long Shocks      

Read more less

Traxxas Hardened Steel Outer Suspension Pins (8-Pack) – Stay Straight. Stay Strong. Precision Toughness Where It Counts.Upgrade your suspension game with Traxxas Outer Suspension Pins, crafted from hardened steel to handle brutal impacts, hard landings, and aggressive driving — without bending. ✅ Includes 8 pins total – (4) 3x34mm + (4) 3x37mm✅ Hardened steel construction – built to resist bending and wear✅ Exact fit for outer suspension points – easy, direct replacement✅ Ideal for high-impact racing & bashing✅ OEM-grade performance & reliability These pins are perfect for replacing bent stock pins or just beefing up your rig before things get wild. 📦 Includes: (4) 3x34mm hardened steel suspension pins (4) 3x37mm hardened steel suspension pins 💥 Stronger pins = straighter suspension = smoother control.Essential upgrade for high-performance RC setups.

Read more less

Traxxas Inner Hardened Steel Upper Suspension Pins (4) – Part 10741XReinforce Your Rig from the Inside Out. These 3x45mm hardened steel inner upper suspension pins are a must-have upgrade for drivers who demand durability under pressure. Designed to hold your suspension geometry tight through punishing landings, hard hits, and high-speed cornering. ✅ Includes 4 hardened steel pins – 3x45mm each✅ Upgrades inner upper suspension link locations✅ Precision-machined for direct fit✅ Won’t bend or flex like stock pins✅ Perfect for high-stress off-road setups 📦 What’s Included: (4) 3x45mm Inner Upper Suspension Pins Part #: 10741X 🔧 Stronger hardware = tighter handling = less downtime.Pair with Traxxas outer pins for a full suspension pin upgrade.  

Read more less

Protect your Mini Maxx where it takes the most abuse with the Traxxas Roof Skid Plate & Tailgate Protector Set. Designed as a direct replacement, this set helps shield your truck’s body from damage during rollovers, flips, and hard landings. 🛡️ Built for Real-World BashingThe roof and tailgate are two of the most common impact points—this set helps: Reduce body wear from rollovers Protect paint and decals Extend the life of your body Perfect for drivers who run their Mini Maxx hard. ⚙️ Factory Fit & Easy Install Genuine Traxxas replacement part Designed specifically for the Mini Maxx platform Installs easily with factory mounting points No modifications needed—just bolt it on and go. ⚡ Features Protects roof and tailgate areas Helps prevent scratches and body damage Durable construction for repeated impacts Clean black finish Direct OEM replacement   📦 Includes (1) Roof Skid Plate (1) Tailgate Protector   🔧 Compatibility Traxxas Mini Maxx      

Read more less

Traxxas Mini Maxx® Servo Saver AssemblyPart #: 10745 Protect Your Steering, Preserve Your Servo.Upgrade or replace with confidence using the Traxxas Mini Maxx Servo Saver Assembly. This OEM replacement includes everything you need to restore smooth, responsive steering while protecting your servo from damaging impacts. Whether you're bashing hard or racing tight, the servo saver and spring work together to absorb stress and keep your setup running strong. Features: Genuine Traxxas quality and fitment Helps prevent internal servo damage Includes spring and horn for complete installation Precision-molded components designed for rugged terrain Includes: (1) Servo Saver (1) Servo Saver Spring (1) Steering Servo Horn Keep your Mini Maxx® steering system strong and responsive with this essential replacement part.

Read more less

Smooth Power. Secure Grip. Keep your Mini Maxx® running strong with the Traxxas 32P Slipper Clutch Composite Spur Gear (47T) — a genuine replacement designed for Mini Maxx® models equipped with the optional slipper clutch system (TRA10758). Engineered for precise fitment and reliable performance, this gear delivers smooth, consistent power transfer under heavy loads. Reliable Performance Upgrade Manufactured from high-quality composite material, this spur gear provides excellent durability while maintaining quiet, efficient drivetrain operation. It’s the perfect solution for drivers running a slipper clutch setup who need dependable performance and long-lasting wear. Features: High-strength composite construction for durability and smooth operation 32-pitch (47T) design for efficient power delivery Direct replacement for slipper clutch–equipped Mini Maxx® models Maintains precise gear mesh and consistent performance Genuine Traxxas factory fit and finish Includes: (1) 32P Composite Spur Gear (47T) Note: Does not fit standard center driveshaft setups Requires optional Slipper Clutch Assembly (TRA10758) Compatibility: Traxxas Mini Maxx® (with slipper clutch system Traxxas Tough — Smooth Power Meets Maximum Control.

Read more less

Traxxas Mini Maxx® Steel CV Driveshaft Assembly (53.5mm)Part #: 10748X Strong. Smooth. Unstoppable.Upgrade your Mini Maxx with Traxxas’ steel constant-velocity (CV) driveshaft for next-level durability and performance. Whether you're bashing, jumping, or racing, this 53.5mm shaft is built to handle the extreme torque and punishment your RC delivers. Perfect as a rugged replacement or a serious performance boost, this CV shaft provides smoother power delivery, reduced binding, and less wear under stress. Engineered by Traxxas for a factory-perfect fit, this is a no-compromise solution for serious RC drivers. Features: Heavy-duty steel construction for maximum strength Precision-machined 53.5mm CV shaft Ideal for high-power setups and extreme terrain Direct fit for Traxxas Mini Maxx® Includes: (1) 53.5mm Steel CV Driveshaft (Shaft Only) When only the toughest will do—bolt in the strength of steel with Traxxas Part #10748X.  

Read more less

Traxxas Mini Maxx® Steel Drive Cup with Screw PinPart #: 10747X Toughen Up Your Driveline.The Traxxas Steel Drive Cup is a must-have upgrade for Mini Maxx owners pushing the limits. Designed for high-strength performance, this heavy-duty steel cup replaces the stock component to better handle extreme torque and rugged terrain. Whether you're running bigger power or just want long-term reliability, this upgrade is built to last. Precision-engineered for a perfect fit and easy installation, it includes a secure screw pin to keep things locked in and running smooth. Features: CNC-machined steel construction for extreme durability Ideal upgrade for high-power builds Direct replacement for Mini Maxx® Includes screw pin for secure installation Includes: (1) Steel Drive Cup (1) Screw Pin Don’t let your drivetrain be the weak link—upgrade with Part #10747X and stay ahead of the pack.  

Read more less

Add strength and style to your Traxxas Mini Maxx® with genuine Traxxas replacement steering knuckles (steering blocks). Whether you're replacing worn parts or upgrading your look, these blocks restore precise steering geometry and keep your Mini Maxx handling like it should. Features• Genuine Traxxas replacement part• Direct bolt-on fit — no modifications required• Durable molded construction for long-lasting performance• Maintains proper steering alignment and suspension geometry• Available in multiple color options: Red Black Blue Green Gray Orange Vehicle Compatibility• Traxxas Mini Maxx® Includes• (2) Mini Maxx® Steering Blocks (color of your choice) Perfect for repairs, rebuilds, or adding a custom touch to your Mini Maxx build.  

Read more less

Light it up. Run it loud.Add serious style and visibility to your Traxxas Mini Maxx® with the Underbody LED Light Kit. This factory-engineered upgrade delivers a vibrant underglow that turns heads day or night—perfect for show setups, night runs, or adding that extra touch of flair to your ride. Factory Fit. Show Ready.Each kit includes pre-wired LED strips, mounting hardware, and plug-and-play connectors designed specifically for the Mini Maxx® chassis. Installation is clean and simple, with no guesswork. Just connect it through your Traxxas lighting system for an instant, professional-grade glow. 💡 Features: Vibrant underbody illumination for a bold, custom look Clean, factory-style fit — minimal modification required Complete kit with pre-wired LEDs, mounts, and connectors Integrates seamlessly with standard Traxxas lighting power Perfect for night driving or show-style presentation Available in Blue, White, Red, or Green ⚙️ Tech Note:Requires either the #6588X Power Supply or the #10795 LED Light Kit (sold separately) for operation. 📦 Includes: (1) Mini Maxx® Underbody LED Light Kit      

Read more less

Widen your stance. Own every turn.Transform your Traxxas Mini Maxx® into a corner-carving beast with the WideMaxx Suspension Arms Set. This factory-engineered upgrade increases your truck’s track width for dramatically better cornering grip, high-speed stability, and control on any surface. Built Tough for Every SeasonMolded from Traxxas’ extreme-duty cold-weather compound, these arms flex without breaking—even in freezing temps—so you can bash year-round without limits. 💪 Features: Widens Mini Maxx track width for maximum stability Boosts cornering performance & high-speed confidence Cold-weather compound stays durable in all conditions Direct fit for the Mini Maxx® Available in Black, Blue, Red, Orange, or Green 📦 Includes: (1) Set – Front Upper & Lower WideMaxx Suspension Arms 🔧 Tech Note:Requires extended toe links and extended drive shafts (sold separately).  

Read more less

Go wide. Stay planted.Take your Traxxas Mini Maxx® to the next level with the WideMaxx Rear Suspension Arms Set. Designed to increase your truck’s track width, this upgrade unlocks sharper cornering, greater stability, and improved balance at high speeds. Built to Bash — Rain, Snow, or ShineConstructed from Traxxas’ extreme-duty cold-weather compound, these arms are engineered for maximum strength and flexibility in any climate. From frozen trails to summer sessions, your Mini Maxx stays tough and ready to rip. 💪 Features: Widens Mini Maxx track width for greater stability Improves traction and cornering precision Maintains strength and flexibility in cold weather Direct factory fit Available in Black, Blue, Red, Orange, or Green 📦 Includes: (1) Set – Rear Upper & Lower WideMaxx Suspension Arms 🔧 Tech Note:Requires extended toe links and extended drive shafts (sold separately).    

Read more less

Overview:Experience pure rally excitement with the Traxxas Mini Rally VXL Ford RS200 — a powerful, scale-realistic rally car that blends breathtaking speed, rugged durability, and authentic Ford styling. Powered by the Velineon® 3500 brushless motor and VXL-3s ESC, this compact powerhouse hits 40+ mph on 2-cell LiPo and 55+ mph on 3-cell power. From dirt tracks to pavement, the RS200 delivers big performance in a compact, ready-to-run package. Authentic Ford RS200 Style Clipless replica Ford RS200 body with molded details, front splitter, air intakes, and mirrors High-output LED light pods for realistic night driving Reinforced side skirts and a durable front splitter Available in multiple color schemes including Fox 1 Black, Fox 2 Orange, and FOXSE Gold Brushless Power System Velineon® 3500 brushless motor with precision-balanced rotor and sintered neodymium magnets VXL-3s ESC with three programmable modes: Sport Mode: Forward / Brake / Reverse Race Mode: Forward / Brake Training Mode™: 50% Forward / 50% Reverse Waterproof design with heat sink and cooling fan Capable of 55+ mph with 3-cell LiPo (sold separately) Advanced Chassis & Driveline Full-time shaft-driven 4WD for consistent traction on all surfaces Direct-drive center differential with steel planetary gears Heavy-duty 32-pitch gearing and sealed differentials Modular long-wheelbase chassis (262 mm) for stability and scale proportions Easy battery access with pivoting hold-down system Suspension & Handling Full-size oil-filled Ultra Shocks™ with large oil capacity Heavy-duty suspension arms and dual-wishbone design 2075X metal-gear servo with double-shear bellcranks Traxxas Stability Management® (TSM®) for improved traction and control on slippery surfaces Wheels, Tires & Hardware White rally wheels with high-traction rally tires Aggressive tread pattern for grip on dirt, gravel, and asphalt Softer rear compound for balanced handling Rust-resistant black oxide-coated hardware and sealed ball bearings Includes: (1) Mini Rally VXL Ford RS200 Ready-To-Race® Rally Car (1) Pre-painted clipless Ford RS200 body (1) Velineon® VXL-3s brushless power system (1) 3500 mAh 2-cell LiPo battery (1) 2-amp USB-C charger with Traxxas iD® technology (1) TQi™ 2.4 GHz radio system with TSM® Optional pinion gear Maintenance tools and Quick Start Guide Specifications: Feature Details Scale 1/10 Mini Drive System Full-time 4WD Top Speed 40+ mph (2S) / 55+ mph (3S optional) Length 16.38 in (416 mm) Width 8.78 in (223 mm) Height 5.71 in (145 mm) Weight 4.04 lb (1.83 kg) Wheelbase 10.32 in (262 mm) Ground Clearance 0.83 in (21 mm) Radio System Traxxas TQi 2.4 GHz 2-Channel Steering Servo 2075X Metal-Gear Motor Velineon® 3500 Brushless ESC VXL-3s Waterproof ESC Battery Compartment 113 × 41 × 22 mm What You’ll Need: (4) AA alkaline batteries for transmitter (Optional) 3S LiPo battery for maximum speed (Optional) Power adapter #2912 and cable #2916 for faster charging

Read more less

Big short course action in a compact 1/16 scale! The Traxxas Mini Slash® Brushless delivers huge 4X4 performance with speeds over 30+ mph, advanced brushless power, and legendary Traxxas durability. Whether you’re tearing up dirt, pavement, or concrete, the Mini Slash brings full short course fun to any setting. ✅ BL-2s Brushless Power System – 3300Kv motor with integrated cooling fan, programmable ESC, and 30+ mph top speed right out of the box✅ Ready to Run – Includes 3500mAh 2S LiPo battery and 2-amp USB-C fast charger with iD® technology✅ Heavy-Duty 4X4 Driveline – Oversized 1/10-scale components, sealed steel-gear differentials, and telescoping driveshafts for extreme durability✅ Extended 235mm Chassis – Improves stability and handling at high speeds✅ Clipless Short Course Body – Realistic interior details, driver figure, and quick-release design for fast battery swaps✅ Licensed BFGoodrich® Tires – Mud-Terrain™ KM3 tires for scale looks and all-terrain grip Specifications: Scale: 1/16 Drive: 4WD Power Source: 2S LiPo Length: 16.06 in (408mm) Wheelbase: 9.25 in (235mm) Width: 8.46 in (215mm) Height: 5.63 in (143mm) Weight: 3.62 lb (1.65kg) Motor: BL-2s 3300Kv ESC: BL-2s Top Speed: 30+ mph Includes: (1) Traxxas Mini Slash® Brushless 1/16 4WD RTR Truck (pre-assembled) (1) BL-2s Brushless Motor & ESC (installed) (1) TQ™ 2.4GHz 2-Channel Transmitter (1) 3500mAh 2S 7.4V LiPo Battery w/ iD® Technology (1) 2-Amp USB-C Fast Charger (1) Clipless Short Course Body (pre-painted & trimmed, available in Yellow, Pink, Green, or Orange) (1) Officially Licensed BFGoodrich® Mud-Terrain™ KM3 Tires (pre-glued) User Manual Needed To Complete: (4) AA batteries for the transmitter Take racing anywhere with the Traxxas Mini Slash® Brushless 4X4 — compact size, big performance, and everything you need to hit the track right out of the box.

Read more less

Protect Your Steering. Preserve Your Servo. Keep your steering system precise and protected with the Traxxas Servo Saver Set, designed for the Mini XRT® and 4-Tec® platforms. This genuine Traxxas replacement part absorbs impact and steering stress, preventing damage to your servo during crashes and high-impact bashing. Reliable Steering Protection Engineered for durability and smooth operation, the servo saver ensures consistent steering response while safeguarding critical steering components. Whether you’re racing or bashing, it’s a simple yet essential upgrade to maintain performance and reliability. Features: Absorbs impact to protect the steering servo from damage Maintains precise steering control and smooth response Durable composite construction built for long-lasting performance Genuine Traxxas factory fit and finish Direct replacement for Mini XRT® and 4-Tec® platforms Includes: (1) Servo Saver Set Compatibility: Traxxas Mini XRT® Traxxas 4-Tec® Traxxas Tough — Steering Protection That Lasts.

Read more less

Traxxas Mod 1.0 Spur Gear (46T / 50T / 54T) — Fine Tune Your Gearing! Dial in the performance of your Traxxas vehicle with precision using Mod 1.0 Spur Gears! Available in 46T, 50T, or 54T, these gears let you adjust acceleration, torque, and top speed to perfectly match your terrain or driving style. Whether you're racing for top speed or need explosive off-the-line acceleration, there's a gear for that. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Great for small tracks & tight turns 🔹 Combine with larger pinion for torque Smaller Spur (Lower T) 🔹 Smoother acceleration 🔹 Higher top speed 🔹 Ideal for wide-open tracks ✅ Compatible With: Traxxas XO-1 Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx 📦 Includes: (1) Traxxas Mod 1.0 Spur Gear in your selected tooth count (46T, 50T, or 54T) 🌀 Fine tune your setup for every terrain — whether you're chasing laps or launching jumps, pick the spur that puts you in the lead!

Read more less

🔧 Strong. Reliable. Ready for action. The Traxxas 6860A Motor Mount is a factory replacement part built to keep your drivetrain solid and secure. Made from durable materials and designed for precision fitment, it ensures your motor stays aligned under intense off-road action. ✅ Direct factory replacement for easy install✅ Maintains perfect gear mesh and alignment✅ Durable construction for long-lasting performance✅ Includes all necessary installation hardware✅ Compatible with multiple 4x4 Traxxas models 📦 Includes:• Motor Mount• Mounting Hardware Compatibility: Traxxas Slash 4x4 Traxxas Hoss Traxxas Telluride 4x4 Traxxas Stampede 4x4

Read more less

This is a set of two replacement Traxxas Nerf Bars, and are intended for use with the Traxxas Slash short course race truck. COMPATIBILITY: Traxxas Drag SlashTraxxas Slash 2wd

Read more less

  Traxxas Aluminum X-Truck Stand (8797)Part of the Keep the Fun Going Sale! Built specifically for X-Maxx® and XRT®, the Traxxas Aluminum X-Truck Stand is the heavy-duty bench tool you need for serious maintenance, display, or storage. Engineered from high-quality aluminum and finished with a striking blue anodized coating, this stand is as tough as it is eye-catching. A 360° rotating platform powered by dual ball bearings lets you access every angle with ease, while the locking lever offers 16 secure positions to lock your X-Truck in place. Non-slip foam pads keep your vehicle stable and protected. Say goodbye to flat-spotted tires and awkward repairs—this stand does it all. 🔧 Features: Custom-designed for Traxxas X-Maxx® and XRT® Durable anodized aluminum with brilliant blue finish 360° rotation on smooth dual ball bearings Locking lever with 16-position adjustability Non-slip foam pads on both top and base Perfect for maintenance, display, and long-term storage Helps prevent flat-spotting tires during storage For the biggest trucks, you need the toughest stand. The Aluminum X-Truck Stand delivers pro-grade performance for your X-Maxx® and XRT®.

Read more less

  Traxxas Planetary Differential Gears & Shafts – Part 2382Restore the Heart of Your Diff. Keep your drivetrain smooth and reliable with this replacement set of internal differential gears and shafts from Traxxas. Whether you're rebuilding a worn diff or stocking up for maintenance, Part 2382 gives you everything you need inside the case. ✅ Direct-fit OEM replacement – fits standard Traxxas planetary differentials✅ Includes planet gears + internal shafts – complete internal gear set✅ Smooth power transfer – maintains tight handling and acceleration✅ Great for rebuilds or spares – essential for long-term performance 📦 Includes: (4) Planet Gears (2) Internal Gear Shafts Part #: 2382 🔧 Pro Tip: Pair with fresh diff grease and new output gears for a complete differential refresh.

Read more less