Traxxas 4x15mm Countersunk Screws (6)Part #: 3167 Don’t let the small stuff slow you down! These Traxxas 4x15mm Countersunk Screws are a must-have for your toolbox. Designed to sit flush and secure, they’re perfect for keeping your rig dialed in and clean. Whether you're replacing worn hardware or building something new, this 6-pack has your back. Includes: (6) 4x15mm Countersunk Screws Built for durability. Backed by Traxxas. Ready for action.  

Read more less

🔧⚙️ Keep Your Drivetrain Performing at Its Best The Traxxas 4x4 Heavy Duty Slipper Clutch Rebuild Kit is a genuine replacement kit designed to restore the performance of your Traxxas slipper clutch assembly. Whether you're performing routine maintenance or replacing worn clutch components after countless runs, this rebuild kit helps maintain smooth power transfer and protects your drivetrain from sudden shock loads. Built to Traxxas factory specifications, it provides the fit and reliability you expect from genuine replacement parts. 🏁 About the Slipper Clutch Rebuild Kit ⚙️ Restore Smooth Clutch Operation Replace worn slipper clutch components to keep your drivetrain operating smoothly and consistently under acceleration. 💪 Genuine Traxxas Replacement Manufactured for an exact fit on compatible Traxxas 1/10 4WD vehicles, ensuring dependable performance and easy installation. 🔧 Routine Maintenance Made Easy An excellent replacement kit for servicing a worn or slipping clutch assembly and keeping your vehicle ready for the next bash. 🔧 Features ✔ Genuine Traxxas replacement part✔ Restores slipper clutch performance✔ Helps maintain smooth power delivery✔ Protects drivetrain components from shock loads✔ Direct-fit replacement for compatible Traxxas 4WD models✔ Ideal for routine maintenance and repairs 📦 Includes (1) Traxxas Slipper Clutch Rebuild Kit 🚗 Compatibility Compatible with many Traxxas 1/10 4WD vehicles, including: Traxxas Slash® 4X4 Traxxas Rustler® 4X4 Traxxas Stampede® 4X4 ⚠️ Notes Genuine Traxxas replacement part. Designed for compatible Traxxas 1/10 4WD slipper clutch assemblies. Verify compatibility with your specific vehicle before installation.

Read more less

  🔧⚙️ Restore Smooth, Consistent Slipper Clutch Performance The Traxxas 4x4 Heavy-Duty Slipper Clutch Rebuild Kit is a genuine replacement kit designed to restore the performance of your Traxxas 1/10 4WD drivetrain. Whether your slipper clutch has worn from countless launches or hard bashing sessions, this rebuild kit provides the components needed to bring it back to proper operation. Designed specifically for Traxxas 4x4 platforms, it's an easy way to maintain consistent power delivery and drivetrain protection. 🏁 About the Heavy-Duty Slipper Clutch Rebuild Kit ⚙️ Restore Factory Performance Replace worn slipper clutch components to help maintain smooth engagement and protect your drivetrain from excessive shock loads. 💪 Genuine Traxxas Quality Manufactured to Traxxas specifications for proper fit, dependable durability, and reliable performance. 🔧 Simple Maintenance Ideal for routine maintenance or repairing a worn slipper clutch after extended use. 🔧 Features ✔ Genuine Traxxas replacement part✔ Restores slipper clutch performance✔ Heavy-duty replacement components✔ Helps maintain smooth power transfer✔ Protects drivetrain components from shock loads✔ Direct-fit replacement for compatible Traxxas 4WD models 📦 Includes (1) Traxxas Heavy-Duty Slipper Clutch Rebuild Kit 🚗 Compatibility Compatible with many Traxxas 1/10 4WD vehicles, including: Traxxas Slash® 4X4 Traxxas Rustler® 4X4 Traxxas Stampede® 4X4 ⚠️ Notes Genuine Traxxas replacement part. Designed for compatible Traxxas 1/10 4WD platforms equipped with the heavy-duty slipper clutch. Verify compatibility with your specific vehicle before installation.

Read more less

Traxxas 5000mAh 11.1V 3-Cell LiPo Battery w/ iD® Connector (Part #2832X) 🔋High-Capacity 3S Power for Demanding RC Vehicles The Traxxas 5000mAh 3S LiPo battery delivers massive power and extended run times for high-performance vehicles. Whether you’re running a VXL-3s system or pushing your rig to the limit on the track or trail, this pack is built for it. The Traxxas iD® connector ensures safe, simple charging with iD-compatible chargers, making it easy to power up and go. ⚡ Features: 🔋 5000mAh Capacity – Long-lasting power and strong punch 🔌 11.1V 3-Cell (3S) Configuration – Ideal for high-speed brushless setups 🔗 Traxxas iD® Connector – Auto-detects settings for safe, simple charging 🧊 Hard Case Construction – Rugged protection for off-road and racing use 📏 Standard 3S Size – Fits a wide range of Traxxas 1/10 and select 1/8 vehicles 📦 Specifications: Voltage: 11.1V Cell Count: 3S (3-cell LiPo) Capacity: 5000mAh Connector Type: Traxxas High-Current iD® Recommended for vehicles like the Slash VXL 4X4, Rustler VXL, Hoss, and more.Use with a Traxxas iD®-compatible charger for best performance and safety. 🔌✅

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Toe Link Overview:This is a replacement set of 59mm toe link turnbuckles designed for select Traxxas 2WD platforms. Pre-assembled with rod ends and pillow balls, they allow for easy installation and precise rear toe adjustments. 🔧 Key Features ✔ 59mm toe link turnbuckles✔ Pre-assembled with rod ends and pillow balls✔ Allows precise toe adjustment✔ Maintains proper suspension alignment✔ Direct fit replacement 📦 Includes (2) Toe Link Turnbuckles 🚗 Compatibility Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2WD Traxxas Slash 2WD Ideal for replacing worn or bent links, these turnbuckles help keep your rear suspension aligned and performing consistently.  

Read more less

Upgrade or replace your suspension components with the Traxxas 8145 Rear Lower Suspension Links. These durable 5x115mm links provide strength, stability, and consistent handling for your Traxxas vehicle. Whether you're restoring stock performance or reinforcing your setup for harder bashing, these lower links are built to handle intense off-road use. Perfect factory fitment ensures quick installation and dependable performance right out of the bag. Features: Genuine Traxxas replacement suspension links 5x115mm size for accurate fitment Durable construction for reliable off-road strength Restores proper suspension geometry and handling Sleek black finish Includes: (2) Rear Lower Suspension Links (Black)

Read more less

Traxxas 5x11x4mm Ball Bearings (2) – Part 5116Smooth Operation. Built to Last. The Traxxas 5x11x4mm Ball Bearings are a direct replacement for worn-out or damaged bearings in a variety of Traxxas vehicles. Designed for low-friction rotation and long-lasting performance, these bearings are perfect for keeping your drivetrain, hubs, or transmission running like new. ✅ Includes 2 ball bearings✅ Size: 5x11x4mm – fits many Traxxas applications✅ Precision construction – reduces rolling resistance and wear✅ Great for wheels, transmissions, and steering systems✅ OEM replacement quality – trusted fit and durability 📦 Includes: (2) 5x11x4mm Ball Bearings Part #: 5116 💡 Pro Tip: Replace bearings in pairs for balanced performance and reduced vibration.

Read more less

Traxxas 5x8x0.5mm Teflon Washers (20) Part #: 1985 Ensure smoother performance and reduced friction with Traxxas PTFE-Coated Teflon Washers. These 5x8x0.5mm washers are designed to be used with ball bearings, helping to extend bearing life and improve overall drivetrain efficiency. ✅ Features: PTFE (Teflon) coating for low friction and long wear Ideal for use with 5x8mm ball bearings Helps reduce heat and drag in rotating components Precision-manufactured for consistent fit and function 📦 Includes: (20) 5x8x0.5mm PTFE-Coated Teflon Washers 🛠️ Perfect for racers and bashers alike — upgrade your RC performance with these ultra-low friction washers from Traxxas!

Read more less

Bushing Overview:This is a replacement set of plastic bellcrank bushings designed for select Traxxas vehicles. They help support smooth steering movement and reduce wear in the bellcrank assembly. 🔧 Key Features ✔ 5x8x2.5mm plastic bushings✔ Designed for bellcrank assemblies✔ Helps maintain smooth steering operation✔ Reduces wear on components✔ Direct replacement 📦 Includes (4) Bellcrank Bushings 🚗 Compatibility Fits various Traxxas models (including Revo and other platforms using 5x8x2.5mm bushings) Ideal for replacing worn bushings, this set helps keep your steering system operating smoothly and reliably.    

Read more less

Keep your Traxxas vehicle running smooth with this pack of 6x12x4mm ball bearings. Designed as a direct replacement, these bearings reduce friction, improve efficiency, and help extend the life of your drivetrain. ✅ Direct Replacement – OEM Traxxas quality and fit✅ Smooth Performance – Reduces friction for improved speed and efficiency✅ Durable Design – Built to handle the demands of RC bashing and racing Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117 Simple, effective, and essential — the Traxxas 5117 Ball Bearings are a must-have for keeping your RC vehicle running at peak performance.

Read more less

The Traxxas 5117A Ball Bearings are a direct replacement set designed to keep your vehicle running smooth and efficient. These high-quality bearings reduce friction, improve drivetrain performance, and extend component life. ✅ OEM Replacement – Perfect fit and finish for Traxxas vehicles✅ Improves Efficiency – Reduces rolling resistance for smoother operation✅ Durable & Reliable – Built to withstand the demands of RC use Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117A Keep your Traxxas vehicle race-ready with the 5117A Ball Bearings — simple, effective, and essential.

Read more less

Keep your RC running smooth and efficient with this pair of Traxxas 6x13x5mm Ball Bearings. Designed as direct replacements, these high-quality bearings reduce friction and improve performance wherever they’re used. 🛠️ Features: Genuine Traxxas replacement part Precision 6x13x5mm ball bearings Helps maintain smooth and reliable drivetrain operation Perfect for maintenance or upgrades Includes:(2) 6x13x5mm Ball Bearings A simple upgrade that makes a big difference in durability and speed—don’t hit the track without them!

Read more less

🔧 Essential Metric Tools for Traxxas Maintenance & Repairs The Traxxas 7-Piece Metric Hex & Nut Driver Essentials Set combines the most commonly used hex and nut driver sizes for maintaining Traxxas RC vehicles. Featuring precision-ground hardened-steel hex drivers, machined hardened-steel nut drivers, and a comfortable rubber over-molded handle, this compact kit provides the tools needed for everyday repairs, adjustments, and maintenance. Each bit uses a standard 1/4-inch hex shank for compatibility with the included magnetic handle or a compatible power driver. The included heavy-duty carrying pouch keeps everything organized and ready for the workbench, track, or field. 🔧 Precision Hex & Nut Drivers The set includes three commonly used metric hex drivers and four metric nut drivers. Precision-machined tips provide a secure fit with compatible hardware, helping reduce slipping, rounded screws, and damaged fasteners. ✋ Comfortable Magnetic Handle The rubber over-molded driver handle provides a comfortable, secure grip with plenty of leverage for stubborn hardware. A powerful magnetic insert securely holds each bit while allowing quick changes between sizes. ⚡ Power Driver Compatible Every driver features a standard 1/4-inch hex shank, allowing the bits to be used with the included hand driver or compatible drill/drivers for faster maintenance and disassembly. 🔧 Features Seven essential metric hex and nut driver sizes Precision-ground hardened-steel hex drivers Machined hardened-steel nut drivers Rubber over-molded handle for improved comfort and grip Magnetic bit retention for fast driver changes Standard 1/4-inch hex shanks Compatible with power drill/drivers Laser-etched sizes for easy identification Heavy-duty carrying pouch included Custom embroidered Traxxas logo Ideal for workbench and trackside maintenance 📦 Includes Straight Hex Drivers: (1) 1.5mm Hex Driver (1) 2.0mm Hex Driver (1) 2.5mm Hex Driver Nut Drivers: (1) 5.0mm Nut Driver (1) 5.5mm Nut Driver (1) 7.0mm Nut Driver (1) 8.0mm Nut Driver Also Includes: (1) Rubber Over-Molded Magnetic Driver Handle (1) Heavy-Duty Traxxas Carrying Pouch 📊 Specifications Specification Details Part Number 8712 Product Type Metric Hex & Nut Driver Essentials Set Hex Driver Sizes 1.5mm, 2.0mm, 2.5mm Nut Driver Sizes 5.0mm, 5.5mm, 7.0mm, 8.0mm Number of Driver Bits 7 Bit Material Hardened Steel Shank Size 1/4in Hex Handle Rubber Over-Molded Bit Retention Magnetic Carrying Case Included 🚗 Application Designed for building, repairing, and maintaining Traxxas RC vehicles using compatible metric hex and nut hardware. ⚠️ Notes Driver sizes are clearly laser etched for quick identification. The 1/4-inch hex shanks can be used with compatible power drivers. Use care when using power tools on small RC hardware to avoid overtightening or stripping fasteners.  

Read more less

🔧 Premium Traxxas Tool Set for Building, Maintenance & Trackside Repairs The Traxxas 7-Piece Metric Hex Bit Master Set is a premium tool kit designed to make building, maintenance, and repairs easier on Traxxas RC vehicles. Featuring precision-ground hardened-steel tips, a comfortable rubber over-molded handle, and standard 1/4-inch hex shanks, this set provides the fit and control needed to help prevent stripped screws and rounded hardware. Everything stores neatly inside the included heavy-duty carrying pouch, making this set equally useful at the workbench, track, or bash spot. 🔧 Precision-Ground Hex Bits Each speed bit features a precision-ground, hardened-steel tip engineered for an accurate fit in metric hex hardware. The precise fit helps reduce slipping, premature tool wear, and damage to screw heads during maintenance. ✋ Comfortable Magnetic Handle The included driver handle features an ergonomic rubber over-molded grip for added comfort and leverage. A powerful magnetic insert securely holds the selected bit while allowing fast bit changes when moving between different hardware sizes. ⚡ Power Driver Compatible The bits feature a standard 1/4-inch hex shank, allowing them to be used with the included hand driver or compatible power drill/drivers for faster wrenching. 🔧 Features Precision-ground hardened-steel metric hex bits Designed specifically for servicing Traxxas models Rubber over-molded driver handle for comfort and grip Magnetic insert securely holds bits in the handle Standard 1/4-inch hex shanks Compatible with power drill/drivers Laser-etched sizing for quick identification Heavy-duty carrying pouch for storage and transportation Custom embroidered Traxxas logo Compact design ideal for trackside and field use 📦 Includes (1) Rubber Over-Molded Magnetic Driver Handle Metric Hex Speed Bits (1) Heavy-Duty Traxxas Carrying Pouch Hex sizes include: 1.5mm 2.0mm 2.5mm 3.0mm 📊 Specifications Specification Details Part Number 8711 Product Type Metric Hex Bit Master Set Hex Sizes 1.5mm, 2.0mm, 2.5mm & 3.0mm Bit Material Hardened Steel Shank Size Standard 1/4in Hex Handle Rubber Over-Molded Bit Retention Magnetic Carrying Case Included 🚗 Application Ideal for building, repairing, and maintaining Traxxas RC cars, trucks, and other models using compatible metric hex hardware. ⚠️ Notes The manufacturer's description identifies this as a 7-piece set, but the supplied information only specifically identifies the four hex sizes, handle, and carrying pouch.

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas 90T Spur Gear – 48 Pitch – Part 4690Optional Gearing. Maximum Torque. Smooth Power Delivery. The Traxxas 90-Tooth Spur Gear (Part 4690) is a high-tooth-count option for drivers looking to increase low-end torque and improve throttle control. Designed for 1/10 scale Traxxas vehicles using 48-pitch gears, this spur is perfect for tight tracks, crawling setups, or slower-speed applications where control matters most. ✅ Tooth Count: 90T – increases torque and low-end response✅ Pitch: 48P – fine-pitch for smooth and quiet operation✅ Optional upgrade for fine-tuning gear ratio✅ Durable molded construction – built to handle real-world use✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 90-Tooth 48P Spur Gear Part #: 4690  

Read more less

Battery, Power Cell AA Alkaline (4)

Read more less

Upgrade your Traxxas with style and strength! The Traxxas Aluminum 30° Caster Blocks deliver precision steering, improved durability, and bold anodized colors that make your vehicle stand out on and off the track. CNC-machined from billet 6061-T6 aluminum and laser-etched with the TRX® logo, these caster blocks are built to perform and made to last. Features: Machined from high-strength 6061-T6 aluminum Precision-fit design improves steering performance and control Available in multiple anodized colors — Blue, Green, Pink, Orange, or Red Laser-etched TRX® logo for a premium look Direct bolt-on installation — no modifications needed Includes hardware and ready for easy installation Includes: (1) Left Front 30° Aluminum Caster Block (1) Right Front 30° Aluminum Caster Block (2) Suspension Screw Pins Compatibility: Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD

Read more less

Upgrade strength, durability, and style with the Traxxas Aluminum Bulkhead Front & Rear Tie Bar Set. Designed as a direct replacement for the stock components, these aluminum tie bars add rigidity to the chassis while reducing flex under hard acceleration, landings, and aggressive driving. Machined from high-quality aluminum and anodized in multiple color options, this set not only improves performance but also adds a clean, factory-upgrade look to your Traxxas 4x4 platform. Features Precision-machined aluminum construction Increased chassis rigidity and durability Reduces flex under high loads and impacts Factory-fit replacement for easy installation Available in multiple anodized colors for custom styling Compatibility Traxxas Hoss Traxxas Rally Traxxas Rustler 4x4 Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4 Includes (1) Front Aluminum Bulkhead Tie Bar (1) Rear Aluminum Bulkhead Tie Bar

Read more less

 🔷 Strengthen Your Suspension. Add Style. Genuine Traxxas Performance. Upgrade the durability and appearance of your Traxxas Revo platform with the Traxxas Aluminum Bulkhead Tie Bars. Precision-machined from high-quality aluminum and finished in brilliant blue anodizing, these tie bars provide increased strength over the stock components while adding a custom factory look. Designed to securely retain the front and rear suspension hinge pins, these aluminum tie bars help maintain suspension alignment under demanding driving conditions, making them an excellent upgrade for high-performance bashing and off-road adventures. ⚡ Features: 🔷 Genuine Traxxas aluminum upgrade part💪 Precision-machined aluminum construction for increased strength🏁 Securely retains front and rear suspension hinge pins⚙️ Helps maintain suspension alignment under heavy loads🛠️ Direct replacement for factory tie bars✨ Blue anodized finish adds a custom appearance and corrosion resistance🚀 Ideal for high-performance driving and durability upgrades 📦 Includes: (1) Front Aluminum Bulkhead Tie Bar(1) Rear Aluminum Bulkhead Tie Bar 📏 Specifications: Part Number: TRA5323 Material: CNC-Machined Aluminum Color: Blue Anodized 🔧 Compatibility: ✅ Traxxas E-Revo VXL 2.0✅ Traxxas Revo Nitro✅ Traxxas Summit 1/10 💡 Pro Tip: Aluminum bulkhead tie bars are a great upgrade for high-powered trucks that see frequent jumps or rough terrain. They help keep the suspension assembly securely aligned while adding both strength and a custom factory appearance to your chassis. Pair them with other Traxxas aluminum upgrades for enhanced durability and a matching look. 🏁🔷💪

Read more less

  Traxxas Aluminum RC Work Stand (8796) – 360° Rotating Maintenance Platform The Traxxas Aluminum RC Stand is the ultimate tool for maintaining, displaying, or storing your RC vehicles. Designed to fit nearly all 1/10 and 1/8 scale models, this durable, anodized blue stand brings pro-level convenience to your workbench. With 360° rotation on dual ball bearings and a locking lever offering 16 secure positions, you'll get smooth, stable access to every angle of your vehicle. Whether you're wrenching, cleaning, or showcasing your build, this stand is built for it all. 🔧 Features: Compatible with most 1/10 to 1/8 scale vehicles Use with TRX-4M Foam Stand (9794) for 1/18 scale models (sold separately) Use with Foam Inserts (8794) for LaTrax 1/18 and Traxxas 1/16 scale vehicles (sold separately) Tough aluminum construction with brilliant blue anodized finish 360° smooth rotation via dual ball bearings Locking lever with 16-position adjustment for stable positioning Non-slip foam pads on top and base for added protection Prevents flat-spotting tires during storage Excellent for both maintenance and display ✅ Compatible Add-Ons: TRX-4M Foam Stand (9794): Secure fit for 1/18 scale TRX-4M models Foam Insert Set (8794): Perfect for LaTrax 1/18 and Traxxas 1/16 models Built for performance. Designed for precision. Maintain your RC fleet like a pro with the Traxxas Aluminum RC Stand.

Read more less

Upgrade strength, durability, and style with the Traxxas Aluminum Rear Stub Axle Carriers. Designed as a direct upgrade for popular Traxxas models, these CNC-machined 6061-T6 aluminum carriers provide increased rear suspension rigidity while adding a clean, professional appearance to your truck. Perfect for racers and bashers alike, these aluminum carriers help reduce flex under load, improving suspension consistency and durability during hard acceleration, rough landings, and aggressive driving. The anodized blue finish delivers that factory performance look while standing up to demanding conditions on and off the track. Features: CNC-machined 6061-T6 aluminum construction Increased strength compared to stock composite carriers Improved rear suspension stability and durability Anodized blue finish for a pro-level appearance Direct replacement upgrade for stock components Vehicle Compatibility: Traxxas Slash 4x4 Traxxas Nitro Rustler Traxxas Nitro Stampede Traxxas Nitro Sport Includes: (2) Aluminum Rear Stub Axle Carriers (2) 3x3mm Set Screws (2) 3x12mm Flat Head Phillips Screws (2) 3x31.5mm Pins (6) 6mm E-Clips Upgrade your rear suspension with strength you can feel and the look to match — built Traxxas tough and ready for serious performance.  

Read more less

  Upgrade your drivetrain with the Traxxas 5556 Aluminum Slipper Pressure Plate & Hub Set. Designed as a direct replacement, this high-quality aluminum set provides enhanced strength, precision, and heat dissipation over stock components — keeping your slipper clutch operating smoothly under pressure. ✅ Features: Precision-machined aluminum construction Helps reduce heat buildup and wear in the slipper clutch Ideal for high-performance applications Genuine Traxxas replacement part for optimal fit and function 📦 Includes: (1) Aluminum Slipper Pressure Plate (1) Aluminum Slipper Hub Whether you're rebuilding or upgrading, this slipper plate and hub combo is built to handle serious power!

Read more less

Traxxas Aluminum Spacer Set – 3x6mm (Part 2539)Fine-Tune Your Fitment. Lightweight. Precise. The Traxxas 3x6mm Aluminum Spacer Set includes a variety of thicknesses, perfect for dialing in suspension geometry, adjusting link positions, or spacing out components during custom builds. ✅ Made from lightweight aluminum – strong and corrosion-resistant✅ Precise inner/outer diameter: 3x6mm – perfect for suspension screws and link hardware✅ Multiple thicknesses included – adjust stack height exactly✅ Great for suspension tuning, link spacing, and custom mods 📦 Includes: (2) 3x6x1.5mm aluminum spacers (1) 3x6x2.5mm aluminum spacer (2) 3x6x3.8mm aluminum spacers Part #: 2539 💡 Pro Tip: Keep a few sets in your pit box — they’re essential for fine-tuning ride height, camber link angles, and shock position.

Read more less

Traxxas Aluminum Steering Bellcrank Set w/ Bearings – Part 3743Sharper Steering. Smoother Feel. Built to Last. Upgrade your steering with the Traxxas Aluminum Bellcrank Set, designed for the Rustler, Bandit, Nitro Slash, and Slash platforms. Precision-machined from aluminum and pre-assembled with high-quality ball bearings, this set delivers enhanced steering precision, long-lasting durability, and sleek custom looks. ✅ CNC-machined aluminum – eliminates flex for ultra-responsive steering✅ Ball bearings included – smooth operation, reduced wear✅ Pre-assembled for quick installation✅ Available in 4 anodized colors: Blue, Green, Pink, and Red✅ Laser-etched Traxxas logo – adds a premium finish✅ Includes step-by-step installation instructions 📦 Fits: Traxxas Rustler Traxxas Bandit Traxxas Nitro Slash Traxxas Slash 📦 Includes: (1) Aluminum Steering Bellcrank Set (Pre-Assembled w/ Bearings) Part #: 3743 Color Options: Blue, Green, Pink, Red 💡 Pro Tip: Match with colored camber links, shock caps, or wheel nuts for a full custom look.

Read more less

Also available in Gray, Orange, Red, Green, or Blue 💪 Unmatched Durability. Precision Handling.Upgrade your steering game with Traxxas 6061-T6 aluminum steering blocks. Designed for ultimate strength and crisp responsiveness, these factory-fit hop-ups deliver enhanced control and killer style. 🚗 Features: CNC-machined from 6061-T6 aluminum Anodized finish for corrosion resistance and high-end looks Includes mounting hardware: (4) 3x12mm screws & (2) 3x15mm screws Perfect factory fit – no mods required Fits left & right – full front-end upgrade in one kit ✅ Compatible with Traxxas Mini Maxx and Mini XRT Built by Traxxas, for Traxxas – because performance and reliability come standard.

Read more less

Traxxas Aluminum Stub Axle Carriers (2) — 3652 Upgrade your rear end with premium strength and precision! These optional aluminum stub axle carriers replace stock plastic units, delivering bullet‑proof durability and a pop of color. ✨ Key Features: Machined 6061‑T6 Aluminum: Lightweight yet incredibly strong Oversized 5×11 mm Sealed Bearings: Smooth, low‑friction performance with maintenance‑free rubber seals Bolt‑On Installation: Direct swap for stock carriers—no mods required Available Anodizing: Choose Red, Blue, or Green to match your style 📦 Includes:2 × Aluminum stub axle carriers with pre‑installed bearings 🔧 Compatibility:Fits any Traxxas model using part #3652 (Slash 4×4, Stampede, Rustler, Maxx, XRT, etc.) Give your truck the strength and style it deserves—order your Traxxas Aluminum Stub Axle Carriers today!

Read more less

Fits Mini Maxx & Mini XRTAvailable in: Gray, Orange, Red, Blue, and Green 💥 Boost Strength & StyleUpgrade your suspension with these 6061-T6 aluminum stub axle carriers from Traxxas. Designed for the left and right rear corners, they offer serious durability and a sharp anodized finish that looks as good as it performs. 🔧 Features: Machined from high-grade 6061-T6 aluminum Brilliant anodized finish in your choice of Gray, Orange, Red, Blue, or Green Provides added strength and precision ✅ Factory fit for Traxxas Mini Maxx & Mini XRT Includes 3x12mm screws (4) & 3x15mm screws (2) Whether you're after performance or style—this upgrade delivers both. 💪🔥

Read more less

Upgrade the strength, adjustability, and style of your Traxxas truck with the Traxxas Aluminum Turnbuckle Camber Link Set (3741X). Designed for models like the Rustler, Stampede, and Slash 2WD, these aluminum turnbuckles provide improved durability and easier suspension adjustments. Manufactured from high-grade 7075-T6 aluminum, these camber links deliver excellent bending stiffness while remaining lightweight. In fact, they are lighter than stock steel turnbuckles and approximately 35% lighter than titanium, helping reduce overall vehicle weight without sacrificing strength. Finished in a brilliant red anodized coating, these links also add a clean performance look to your build. The set includes a matching 5mm aluminum wrench that allows quick camber adjustments while preventing damage to the anodized finish. Each turnbuckle comes fully assembled with rod ends and hollow balls, making installation quick and simple. Features• 7075-T6 aluminum construction for strength and stiffness• Lighter than stock steel turnbuckles and 35% lighter than titanium• Red anodized finish for durability and style• Easy camber adjustments with included 5mm aluminum wrench• Pre-assembled with rod ends and hollow balls for quick installation Compatibility• Traxxas Rustler 2WD• Traxxas Slash 2WD• Traxxas Stampede 2WD• Traxxas Nitro Slash Includes• (4) Aluminum Camber Turnbuckles (Red)• (1) 5mm Aluminum Wrench

Read more less

Traxxas Antenna Tube Kit (Blue) – Part #1726📡 Stay Tuned. Stay Connected. The Traxxas Antenna Tube Kit is a direct replacement for many Traxxas vehicles, including the legendary Revo. Designed to protect and organize your receiver antenna, this kit helps maintain strong, consistent radio signal during high-speed runs and rough terrain. Whether you're rebuilding or just refreshing your rig, this simple upgrade keeps things clean and dialed in. ✅ Compatible with Traxxas Revo and more✅ Helps prevent antenna wire damage and tangles✅ Blue tube with black end cap and secure tubing sleeve✅ Easy to install, race-ready durability 📦 Includes: (1) Blue Antenna Tube (1) Black Antenna Cap (1) Black Tubing Sleeve for wire management

Read more less

Traxxas Ball Bearings 5x10x4mm (2) – Part 4609Smooth Performance. Long-Lasting Precision. The Traxxas 5x10x4mm Ball Bearings are ideal replacements or upgrades for high-wear areas in your RC drivetrain or suspension. Designed for smooth, low-friction rotation and sealed for durability, these bearings are a must-have for any serious builder or racer. ✅ Includes 2 high-quality ball bearings✅ Size: 5x10x4mm – fits a wide range of Traxxas vehicles✅ Sealed design – keeps out dirt and debris✅ Reduces rolling resistance and friction✅ Perfect for hubs, transmissions, steering systems & more 📦 Includes: (2) 5x10x4mm Ball Bearings Part #: 4609 💡 Pro Tip: Always keep extra bearings in your pit box — a quick swap keeps your rig rolling like new.

Read more less

Chassis Brace Overview:This is a replacement upper chassis brace designed for the Traxxas Bandit and Rustler 2WD platforms. It helps reinforce the chassis and maintain structural integrity during use. 🔧 Key Features ✔ Replacement upper chassis brace✔ Reinforces chassis structure✔ Helps maintain alignment✔ Durable construction✔ Direct fit design 📦 Includes (1) Upper Chassis Brace 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Ideal for replacing worn or damaged components, this brace helps keep your chassis strong and performing as intended.      

Read more less

Chassis Brace Overview:This is a replacement upper chassis brace designed for the Traxxas Bandit and Rustler 2WD platforms. It helps reinforce the chassis and maintain structural integrity during use. 🔧 Key Features ✔ Replacement upper chassis brace✔ Reinforces chassis structure✔ Helps maintain alignment✔ Durable construction✔ Direct fit design 📦 Includes (1) Upper Chassis Brace 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Ideal for replacing worn or damaged components, this brace helps keep your chassis strong and performing as intended.      

Read more less

Chassis Plate Overview:This is a replacement lower chassis plate designed for the Traxxas Bandit and Rustler 2WD platforms. It provides the main structural foundation of the vehicle, maintaining proper alignment and durability. 🔧 Key Features ✔ Replacement lower chassis plate✔ Durable construction✔ Maintains proper vehicle alignment✔ Direct fit design 📦 Includes (1) Lower Chassis Plate 📊 Specifications Battery Compartment Length: 166mm 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Ideal for replacing a damaged chassis, this plate helps restore strength, alignment, and overall performance.    

Read more less