Traxxas Heavy Duty Front Driveshaft AssemblyPart #: 6851X Upgrade or replace with confidence using this Heavy Duty Front Driveshaft Assembly from Traxxas. Designed for the Stampede 4x4, this driveshaft is a direct-fit replacement that comes fully assembled and ready to install. Built for durability and performance, it’s compatible with both the left and right sides of the chassis. Features: Heavy-duty construction for increased durability Pre-assembled for quick, hassle-free installation Fits left or right front of the Stampede 4x4 Genuine Traxxas part for factory reliability Vehicle Compatibility: Traxxas Stampede 4x4 Includes: (1) Heavy Duty Front Driveshaft Assembly  

Read more less

Traxxas Heavy Duty Steel CV Rear Driveshafts (2) Part #: 1951R Upgrade your drivetrain with these Heavy Duty Steel Constant Velocity (CV) Rear Driveshafts from Traxxas. Built for extreme performance, these shafts provide superior strength and durability, perfect for high-torque setups and aggressive off-road action. ✅ Features: Heavy-duty steel construction for max durability Nickel-plated finish for corrosion resistance and a premium look Black silicone boots offer protection and custom styling Sealed and lubricated outer U-joints for extended life Captured U-joint pins to prevent loss under heavy use 📦 Includes: (2) Steel CV Rear Driveshafts Pre-installed rubber boots and hardware 🔧 Boost your drivetrain’s strength and reliability with Traxxas steel CV shafts — built for serious bashers and racers alike!

Read more less

Traxxas Suspension Arms (Left & Right) – 3655Replacement Arms for Bigfoot®, 2WD Rustler®, and 2WD Stampede® Keep your suspension performing at its best with these genuine Traxxas replacement suspension arms. Designed as direct replacements for the Bigfoot®, Rustler® 2WD, and Stampede® 2WD, this set includes both the left and right arms for a quick and reliable fix. Features:• Direct replacement suspension arms• Fits Bigfoot®, Rustler® 2WD, and Stampede® 2WD• Durable molded construction built for off-road abuse• Includes both left and right arms Includes:• (1) Left Suspension Arm• (1) Right Suspension ArmPart Number: 3655 Get back on the track or trail with OEM strength and fit—built Traxxas tough.

Read more less

Upgrade your drivetrain with the Traxxas Rear HD Driveshaft Assembly, built tough with a 6mm axle for maximum durability. Designed for use on the Hoss 4x4, Rustler 4x4, and Slash 4x4, this assembly is required when your vehicle is equipped with the Traxxas Extreme Heavy Duty Suspension Upgrade Kit (TRA9080X). ✅ Heavy-Duty Strength – Built to handle extreme torque and off-road abuse✅ Direct Replacement – OEM fit for Hoss 4x4, Rustler 4x4, and Slash 4x4✅ Complete Assembly – Comes pre-assembled with axle and hardware for quick install✅ For HD Suspension Models – Compatible only with vehicles using the TRA9080X Extreme Heavy Duty Suspension Kit Includes: (1) Rear HD Driveshaft Assembly w/ 6mm axle Required hardware Compatibility: Traxxas Hoss 4x4 (with TRA9080X kit) Traxxas Rustler 4x4 (with TRA9080X kit) Traxxas Slash 4x4 (with TRA9080X kit) Take your 4x4’s durability to the next level with the Traxxas 9052 Rear HD Driveshaft Assembly — built for serious bashing and racing.

Read more less

  Traxxas Jato/Slayer Heavy Duty Rod Ends (8) – Part #5525R💪 Built Stronger. Ready for More. Upgrade your rig with the Traxxas 5525R Heavy Duty Rod Ends. Designed specifically for the Jato and Slayer, these rod ends offer increased durability for high-impact conditions and can also be used as a stronger alternative to standard TRA5525 ends in a variety of Traxxas vehicles. ✅ Heavy-duty construction for added strength✅ Compatible with Jato, Slayer, and other models using TRA5525 ends✅ Direct fit with no modifications required✅ Ideal upgrade for high-stress suspension or steering components❌ Note: Pillow balls not included 📦 Includes: (8) Heavy Duty Rod Ends COMPATIBILITY: Traxxas Jato Traxxas Rustler Traxxas Slash Traxxas Stampede

Read more less

Traxxas Jato® 4X4 1/8 Brushless RTR 4WD Electric Racing Buggy (Black) w/ TQ™ 2.4GHz Radio 🏁Legendary Speed. Built Traxxas Tough. The Jato® 4X4 BL-2s is a race-bred 1/8 scale buggy engineered for speed, control, and durability. With a low-CG chassis, track-tuned suspension, and Extreme Heavy Duty drivetrain, the Jato blasts through terrain with precise handling and brutal brushless power. Powered by the BL-2s™ brushless system, it delivers up to 60% more speed than brushed models, while a clipless body system makes battery swaps quick and simple. 💥 Features: ⚡ BL-2s™ Brushless Power System – High-efficiency 3300kV motor + waterproof ESC 🧊 ESC with 3 Drive Modes – Sport, Race, and Training Mode™ for all skill levels 💪 Extreme Heavy Duty Upgrades – Maxx-Duty® driveshafts, reinforced shock towers & drivetrain 🔧 Modular Low-CG Chassis – Designed for sharp cornering and easy maintenance 🛞 Sledgehammer® Tires – High-grip tread on 3" black dished wheels 🧲 Clipless Body Mounting – Fast, tool-free access with high-downforce wing for stability 🛠️ GTR Oil-Filled Shocks – Plush, consistent suspension on any surface 🎮 TQ™ 2.4GHz Radio System – Proven long-range precision 📦 Includes: (1) Traxxas Jato® 4X4 1/8 Brushless RTR Buggy (Black) (1) BL-2s™ 3300kV Sensorless Brushless Motor (1) BL-2s™ Electronic Speed Control (ESC) (1) TQ™ 2.4GHz 2-Channel Transmitter Miscellaneous Maintenance Tools Product Manual 🔋 Needed to Complete: (1) 2S LiPo Battery w/ Traxxas iD® Connector (1) Compatible Charger (TRA2920 recommended) (4) AA Batteries for Transmitter 📐 Specs: Scale: 1/8 Drive: 4WD Length: 20.4 in (517 mm) Width: 12.0 in (305 mm) Height: 7.0 in (179 mm) Wheelbase: 12.6 in (320 mm) Weight: 83.2 oz (2358.6 g) Motor: 3300kV Brushless (Sensorless) ESC: BL-2s™ Waterproof Servo: High-Torque Wheels: 3.0 in (Front & Rear) Tires: Sledgehammer® (Front & Rear) Hex Size: 17mm Battery Tray: Compatible with 2S LiPo (7.4V) Hit the throttle and hang on — the Jato 4X4 is ready to launch.Precision handling. Extreme power. Pure Traxxas performance. 💨

Read more less

Traxxas Link Wireless Module – Smart Control, Real-Time Data Unleash the full power of your Traxxas TQi radio with the Traxxas Link Wireless Module. Instantly connect your transmitter to the Traxxas Link™ app via Bluetooth and dial in your vehicle like never before. Whether you're chasing lap times or just want to geek out on data—this module turns your RC experience into something next level. Highlights:🔹 Real-time telemetry (speed, RPM, temps, voltage – with optional sensors)🔹 Live tuning on the fly – make changes while you're driving🔹 Intuitive, HD interface through the free Traxxas Link app🔹 Bluetooth wireless connection to iOS & Android🔹 Share data, log runs, or let your buddy co-drive remotely What’s In The Box: (1) Traxxas Link Wireless Module Compatible With: All Traxxas TQi Transmitters iOS 4.3+ & Android 4.4+ Optional Traxxas telemetry sensors  

Read more less

Traxxas Long & Short Rod and Ball EndsPart #: 1942 Tighten Up Your Linkages. Improve Your Control.Upgrade or refresh your ride with this versatile pack of long and short rod and ball ends from Traxxas. Whether you're replacing worn parts or customizing your camber and steering setup, these rod ends provide a durable, secure fit that enhances performance and steering precision. Perfect for Traxxas vehicles, these also work great on a variety of platforms, including the Team Associated RC10GT (rear camber link) and Thunder Tiger EB4 S3 (steering rods), helping eliminate rub and bump steer. Features: Genuine Traxxas quality and fit Includes both long and short rod ends Ideal for camber links and steering rods Compatible with multiple RC brands and platforms Includes: A variety of long and short rod ends Ball ends for a complete install When every millimeter of movement counts, this Traxxas rod and ball end set gives your RC vehicle the precision and durability it needs.

Read more less

The Traxxas 7430R Long Chassis Front Bulkhead is a direct replacement part designed for Rustler 4X4 and Rustler 4X4 VXL models equipped with the optional extended chassis (TRA6723R). Built for durability and precision fit, it’s a must-have when upgrading or repairing your long wheelbase setup. Features:• Replacement front bulkhead for long chassis setups• Compatible with Rustler 4X4 and 4X4 VXL• Designed for use with optional TRA6723R extended chassis Includes:• (1) Long Chassis Front BulkheadPart Number: 7430R Keep your extended Rustler 4X4 performing at its best with genuine Traxxas parts.

Read more less

Traxxas Long Shock Shafts (2) Part #: 1664 | Replacement Steel Shafts Keep your suspension running smooth with the Traxxas 1664 Long Shock Shafts. These hardened steel shafts are direct replacements for a variety of Traxxas models and ensure your shocks maintain consistent damping and performance after hard landings or heavy use. 📦 Includes: (2) Long Shock Shafts ✅ Features: Precision-machined steel construction for durability Direct replacement for stock long shock shafts Restores proper shock performance Compatible with multiple Traxxas vehicles 🚗 Compatibility: Traxxas Slash Bandit Stampede / Nitro Stampede Rustler Nitro Sport Always refer to your vehicle’s manual for exact fitment and installation instructions.

Read more less

Upgrade your drivetrain with precision and strength. The Traxxas 20T Machined Mod 1.0 Pinion Gear is built for serious performance, featuring a 5mm bore and high-quality machined steel construction. Designed for the Traxxas E-Revo 2.0 and Maxx, this gear is ideal for high-torque brushless setups when paired with a steel spur gear. Features:• 20-tooth Mod 1.0 pitch• 5mm bore fits 1/8-scale motor shafts• Precision-machined steel construction• For use with steel spur gears only• Perfect for E-Revo 2.0 and Maxx Includes:• (1) 20T Machined Steel Pinion GearPart Number: 6494R

Read more less

Conquer any terrain with confidence! These ultra-rugged Sledgehammer® tires deliver unstoppable traction and aggressive performance on loose, muddy, or uneven ground. Pre-mounted on 2.8" dual-profile black Maxx® wheels with a beadlock-style ring, they’re ready to take your Maxx to the next level. 🛠 Features: Open block tread for extreme off-road traction Increased diameter for more ground clearance TSM®-rated for high-speed stability Pre-glued with foam inserts on black Maxx wheels Fits 17mm splined hex hubs, front or rear 📦 Includes: (2) Sledgehammer Tires pre-mounted on 2.8" Black Maxx Wheels Built to bash. Designed to dominate. Perfect for serious Maxx® off-road action.

Read more less

  Unlock the full performance potential of your Traxxas vehicle with this 4-cell 14.8V 5000mAh 25C LiPo battery, engineered to deliver serious punch, blazing speed, and extended run times. Designed exclusively for Traxxas vehicles, this iD-equipped Power Cell LiPo ensures perfect compatibility and easy, safe charging when paired with Traxxas iD chargers. ⚡ Key Features: Official Traxxas iD-equipped LiPo battery Designed specifically for Maxx 4S and other Traxxas 4-cell compatible models Delivers maximum power, performance, and runtime Rugged and reliable for high-performance driving 🔧 Specs: Type: LiPo Voltage: 14.8V (4S) Capacity: 5000mAh Discharge Rate: 25C Length: 155mm Width: 45mm Height: 34mm Weight: 16.8oz 🔌 Connector: Traxxas iD High-Current Connector ⚠️ Charging Note:This battery must be charged using a Traxxas iD Battery Charger. Never use a non-iD charger—doing so can cause fire, injury, or property damage.

Read more less

Traxxas Maxx Battery Hold-Down w/ Mounts – Part 8919Keep It Locked Down. Factory Fit for the Standard Maxx. The Traxxas Battery Hold-Down Set (8919) is a direct replacement for the standard wheelbase Traxxas Maxx. Designed to keep your battery secure through rough terrain, big air, and high-speed runs, this complete kit includes all the mounting hardware and foam padding you need for a snug fit. ✅ Fits standard Traxxas Maxx chassis✅ OEM replacement hold-down system – direct bolt-on✅ Durable composite construction – made to last✅ Foam pads included – protects battery and reduces movement✅ Front and rear mounts with spacers – complete install solution 📦 Includes: (1) Battery Hold-Down (1) Front Mount (1) Rear Mount (2) Battery Compartment Spacers (2) Foam Pads Part #: 8919 💡 Pro Tip: Keep a second hold-down kit on hand when running different-sized packs — swap and go based on your setup.

Read more less

Keep your Maxx steering sharp and reliable with this Traxxas Caster Block Set, designed specifically for the Traxxas Maxx 1/10 Monster Truck. This replacement set includes both left and right C-hubs, ensuring precise fitment and rugged durability to handle even the roughest terrain. 🔧 Features: Genuine Traxxas replacement part Includes left and right caster blocks (C-hubs) Durable molded composite construction Direct fit for the Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Left Caster Block (1) Right Caster Block Essential for suspension performance and cornering stability—swap in a fresh set and keep your Maxx running at its best.

Read more less

Traxxas Maxx Duty Driveshaft Assembly – Part 8950Tough Enough for Maxx Power. Ready for Action. The Traxxas Maxx Driveshaft Assembly (8950) is a direct replacement for the Maxx 1/10 Brushless 4WD Monster Truck, designed to handle brutal brushless torque and aggressive off-road abuse. Use it in the front or rear to restore performance or keep it on hand as a critical spare. ✅ Maxx-duty design – stronger than stock driveshafts✅ Fully assembled and ready to install✅ Fits front or rear position✅ Perfect for brushless setups and hard-driving conditions✅ Includes screw pin for secure mounting 📦 Includes: (1) Maxx Duty Driveshaft Assembly (Front or Rear) (1) Screw Pin Part #: 8950 💡 Pro Tip: Keep one in your pit box — a snapped driveshaft can end a bash session early.

Read more less

Keep your Maxx monster truck tough and trail-ready with this genuine Traxxas replacement front bulkhead. Designed for the 1/10-scale Traxxas Maxx Brushless Monster Truck, this set includes both the upper and lower front bulkhead components for a precise factory fit. Features:• Direct replacement for the Traxxas Maxx (1/10 Brushless)• Includes both upper and lower front bulkhead pieces• Durable molded construction for extreme bash resistance• OEM fit and finish for easy installation Includes:• (1) Upper Front Bulkhead• (1) Lower Front BulkheadPart Number: 8920 Stay strong on every jump, bash, and crash—repair with genuine Traxxas parts.  

Read more less

Keep your Maxx tough where it counts! The Traxxas 8926 Front Bulkhead Tie Bar is a direct replacement part designed to reinforce the front end of your Maxx 1/10 Brushless Monster Truck. Made from strong steel, this set includes one upper and two lower tie bars to help maintain chassis strength during heavy-duty action. 🔩 Features: Genuine Traxxas replacement part Durable steel construction for added strength Helps prevent bulkhead flex and damage under hard impacts Precision fit for the Traxxas Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Built for bashing? Keep your Maxx together with this must-have front-end reinforcement!

Read more less

Restore the strength and precision of your Maxx’s front suspension with this genuine Traxxas Front Shock Tower set. Includes both left and right halves of the front shock tower, made from durable composite material to withstand big jumps and hard landings. 🔧 Features: Direct replacement for the Traxxas Maxx 1/10 Brushless Monster Truck Includes left and right front shock tower halves Molded from tough composite for impact resistance Provides secure mounting points for shocks and upper suspension arms 📦 Includes: (1) Left Front Shock Tower Half (1) Right Front Shock Tower Half Built for bashers. Trusted by racers. Get your Maxx back on track with Traxxas original parts.

Read more less

Keep your Maxx performing at its peak with this genuine Traxxas hardened steel suspension pin set, designed for the front left or right side of the truck. Perfect for repairs or upgrades, these pins provide the strength needed to handle extreme terrain and hard impacts. 🔩 Features: Hardened steel construction for maximum durability Direct OEM replacement for the Traxxas Maxx Fits either the front left or right suspension Engineered for a precise fit and long-lasting performance 📦 Includes: (1) 4x64mm Suspension Pin (2) 4x22mm Suspension Pins (1) 4x38mm Suspension Pin (1) 4x33mm Suspension Pin (1) 4x47mm Suspension Pin Whether you’re rebuilding after a rough landing or upgrading for toughness, this suspension pin set has you covered.

Read more less

Upgrade or replace with confidence using these genuine Traxxas Maxx Lower Suspension Arms. Designed for use with the optional WideMaxx® kit, these arms fit either the front or rear of your Maxx and deliver rugged durability with precise fitment. Features:• Fits front or rear of Traxxas Maxx with WideMaxx kit• Includes left and right lower suspension arms• Heavy-duty molded construction for extreme durability• Direct OEM replacement—no modifications needed Includes:• (2) Lower Suspension Arms (Left & Right)Part Number: 8999 Built for wide stance performance and ready for tough terrain—run wider, bash harder.

Read more less

Keep your steering sharp and responsive with this genuine Traxxas replacement servo horn and linkage set for the Maxx 1/10 Brushless Monster Truck. Whether you're upgrading or replacing worn components, this factory-assembled set ensures a precise fit and reliable performance. 🔧 Features: Direct replacement for stock Maxx components Factory-assembled 46mm linkage rod for hassle-free installation Designed to maintain smooth, accurate steering response 📦 Includes: (1) Servo Horn (1) 46mm Linkage Rod (pre-assembled) A must-have spare for every Maxx owner—stay ready for action with dependable OEM parts from Traxxas.

Read more less

Traxxas Maxx Steel CV Driveshaft (Single) – Part 8950AOne-Piece Strength. Smooth, Reliable Power. The Traxxas 8950A Steel Constant-Velocity Driveshaft is a heavy-duty replacement designed for the Maxx 1/10 Brushless Monster Truck. Built to handle high torque and intense off-road conditions, this shaft delivers smoother performance and longer life compared to stock components. ✅ Heavy-duty steel construction – built for extreme brushless power✅ Constant-velocity design – maintains smooth output through full suspension travel✅ Compatible with front or rear positions✅ Requires TRA8951 drive cup for installation✅ Ideal for replacing a single damaged shaft or keeping as a spare 📦 Includes: (1) Assembled Steel CV Driveshaft Part #: 8950A Note: Use only with Traxxas Drive Cup Part #8951 💡 Pro Tip: Always check your drive cups for wear when replacing a CV shaft to maintain peak drivetrain performance.

Read more less

  Traxxas Maxx Steel CV Driveshaft Set (4) – Part 8950XFull-Metal Strength. Smooth Power Transfer. The Traxxas 8950X Steel Constant-Velocity Driveshaft Set is a premium upgrade for your Maxx, delivering superior strength and silky-smooth power delivery. These fully assembled steel CV driveshafts are perfect for high-torque brushless setups, big jumps, and aggressive off-road terrain. ✅ Includes 4 heavy-duty steel CV driveshafts – run front or rear✅ Fully assembled and ready to install✅ Improved durability over stock plastic shafts✅ Smooth, consistent power transfer through full suspension travel✅ Ideal for high-performance brushless builds and extended runtime stability 📦 Includes: (4) Steel Constant-Velocity Driveshafts (Assembled – Front or Rear) Part #: 8950X 💡 Pro Tip: Upgrade all four corners at once to eliminate drivetrain weak points and reduce maintenance.  

Read more less

Upgrade your Maxx® with the strength and control of the Traxxas Steel Steering Servo Horn. Built tough for extreme bashing and high-power servos, this steel horn replaces the stock part for maximum durability and precise steering performance. 💪 Features: CNC-machined steel construction for superior strength Eliminates flex for consistent steering response Ideal for high-torque servo upgrades Direct fit for the Traxxas Maxx® 📦 Includes: (1) Steel Steering Servo Horn Take command of your Maxx with confidence—this heavy-duty horn is ready for serious action.

Read more less

Restore precision steering to your Maxx with this genuine Traxxas replacement bellcrank set. Designed specifically for the Maxx 1/10 4WD Brushless Monster Truck, this set includes all the essential components needed for a complete steering assembly refresh. 🛠️ Features: Direct OEM replacement for the Maxx Maintains crisp, responsive steering performance Built from high-strength materials for durability under heavy loads 📦 Includes: (2) Steering Bellcranks (1) Bellcrank Support (1) Servo Saver (1) Servo Saver Spring (1) Draglink (2) 3x20mm Shoulder Screws Keep your Maxx sharp and responsive—perfect for high-speed runs and rugged off-road terrain.

Read more less

🔧 Keep your Maxx steering strong and precise. These replacement Traxxas Maxx Steering Blocks are a direct factory fit for the Maxx 1/10 Monster Truck. Built to OEM specs, they restore smooth steering performance and ensure proper front-end alignment—perfect for repairs or routine maintenance. ✅ Genuine Traxxas replacement parts✅ Direct fit for quick installation✅ Restores factory steering performance✅ Vehicle Compatibility: • Traxxas Maxx 📦 Includes:• (1) Left Steering Block• (1) Right Steering Block

Read more less

Keep your Maxx® running strong with these genuine Traxxas replacement stub axle carriers. Designed for durability and precise fit, this left and right set restores smooth performance to your rear suspension system. 🔧 Features: Direct replacement parts for Traxxas Maxx Includes both left and right stub axle carriers Molded for strength and reliability Helps maintain proper alignment and smooth operation 📦 Includes: (1) Left Stub Axle Carrier (1) Right Stub Axle Carrier A must-have spare for racers and bashers—ensure your Maxx stays race-ready and trail-tough!

Read more less

  Keep those front wheels in check with the Traxxas Maxx Wheelie Bar! Designed as an optional upgrade for the Traxxas Maxx, this durable wheelie bar helps control wild launches and hard acceleration. It comes pre-assembled with wheels and is available in multiple color options to match your ride. Note: Mounting hardware is not included. Features:• Optional wheelie bar for Traxxas Maxx• Pre-assembled with wheels for easy setup• Helps control wheelies and improves stability• Available in multiple color options (sold separately)• Mounting hardware required (not included) Includes:• (1) Pre-Assembled Wheelie BarPart Number: 8976 Control the power and ride the wheelies in style—Traxxas tough, Maxx ready.

Read more less

Traxxas Maxx 1/10 Brushless 4WD Monster Truck w/WideMaxx Kit (RTR) Built Wider. Built Stronger. Built for More. Take your bashing to the next level with the Traxxas Maxx® featuring the factory-installed WideMaxx® Suspension Kit. With a longer chassis, bigger tires, and increased width, this beast is engineered for extreme performance, insane durability, and relentless fun. ✅ Factory-Installed WideMaxx Suspension – 1.5” Wider Stance✅ Pre-Mounted Sledgehammer® Tires – Maximum Grip & Self-Cleaning✅ Clipless Body System – Easy One-Hand Removal & Install✅ GT-Maxx™ Aluminum Shocks – Tuned for Big Air✅ 540XL Brushless Motor – 60+ MPH Capable (w/Optional Gearing)✅ Waterproof Electronics – Bash Anywhere, Any Weather Built to Bash Harder This version of the Maxx® comes with a longer wheelbase for added stability and battery space, steel-gear differentials, aluminum splined driveshaft, and full-contact sealed bearings. Whether you're sending it off ramps or tearing through mud, the Maxx is ready. Specifications: Length: 22.50" (572mm) Width: 15.95" (405mm) Wheelbase: 13.85" (352mm) Weight: 10.4 lbs (4.7kg) Motor: Traxxas 540XL (2400kV) ESC: Velineon® VXL-4s Waterproof Max Speed: 60+ MPH (with optional gearing & 4S battery) Drivetrain: 4WD Tires: Sledgehammer® (5.64") Shocks: GT-Maxx™ Aluminum In The Box: ✔️ (1) Traxxas Maxx® 4WD Monster Truck with WideMaxx Kit✔️ (1) TQi™ 2.4GHz Radio System✔️ (1) Traxxas 540XL Brushless Motor✔️ (1) Velineon® VXL-4s ESC✔️ Quick Start Guide & High-Quality Maintenance Tools Needed to Complete: 🔋 (1) 3S or 4S LiPo Battery with Traxxas iD® Connector⚡ (1) Compatible Traxxas iD® Battery Charger🔋 (4) AA Batteries for the Transmitter

Read more less

Traxxas Medium Rubber Pit Mat – 24x16in with Magnetic Compartments The Traxxas Medium Pit Mat is the ideal upgrade for your RC workbench. Constructed from chemical-resistant, heavy-gauge rubber, this mat protects your surface from damage during repairs, cleaning, or builds. At 24" x 16", it's sized just right for most 1/10 scale or smaller vehicles. Two magnetic compartments keep screws from rolling away, while custom-molded sections help organize your tools and parts for maximum efficiency. 🔧 Features: 24″ x 16″ (61 x 40.5 cm) size – fits most 1/10 scale or smaller RCs Chemical-resistant, heavy-gauge rubber construction Dual magnetic compartments to secure screws and small metal parts Specialized recessed areas for organizing tools and components Non-slip surface with molded Traxxas branding Built for wrenching. Designed for durability. A must-have for serious hobbyists.

Read more less

Traxxas Metal Gear Set for 2065R Servo – Part 2064RRestore Precision. Reinforce Performance. The Traxxas 2064R Metal Gear Set is a direct replacement for the 2065R waterproof sub-micro servo. Whether you’ve stripped a gear or want to upgrade before failure, this set provides the toughness and precision your servo needs to perform under pressure. ✅ Fits Traxxas 2065R waterproof sub-micro servo✅ Hardened metal construction – durable and wear-resistant✅ Exact OEM replacements – restores like-new performance✅ Ideal for high-stress applications and harsh conditions✅ Great spare to keep in your toolbox 📦 Includes: (1) Complete Metal Gear Set for 2065R Servo Part #: 2064R 💡 Pro Tip: Replacing worn servo gears early helps prevent servo failure and protects your steering or shifting systems.

Read more less

Traxxas Mini Maxx Assembled Slipper Clutch – Pre-Built & Track-ReadyControlled Power. Built-In Protection. Dial in reliable traction and drivetrain protection with the Traxxas Assembled Slipper Clutch for the Mini Maxx®. This factory-assembled clutch delivers smooth power transfer and guards against drivetrain shock under heavy throttle or hard landings. ✅ Fully pre-assembled – no guesswork, just drop it in✅ Protects drivetrain from shock loads – especially off jumps✅ Improves traction under acceleration✅ Perfect for high-power brushless setups✅ Direct fit for Mini Maxx® 📌 Important Compatibility Notes:Requires additional components to complete install: #10757 – Slipper Shaft #10762 – Spur Gear Assembly 📦 Includes: (1) Complete Assembled Slipper Clutch Fits Mini Maxx® platform 💡 Pro Tip: Pair with hardened driveshafts and upgraded bearings for a bulletproof drivetrain build.  

Read more less

Traxxas Mini Maxx Driveshaft AssemblyPart #: 10750 Factory Tough. Ready to Rip.The Traxxas 10750 Driveshaft Assembly is a direct replacement designed specifically for the Mini Maxx. Built to withstand brutal bashing, big air, and serious brushless power, this heavy-duty driveshaft ensures your drivetrain stays strong under pressure. Pre-assembled for quick and easy installation, it gets you back on the track or trail with less downtime and more fun. Features: Precision-built for Traxxas Mini Maxx Handles high-performance, high-torque demands Durable construction for long-lasting reliability Fully assembled and ready to drop in Includes: (1) Complete Driveshaft Assembly Keep your Mini Maxx running strong—grab a replacement that’s built Traxxas Tough.

Read more less

Traxxas Mini Maxx Rear Shock Tower (Part 10744) – Stronger. Straighter. Smarter. Give your Mini Maxx the support it needs with the Traxxas Rear Shock Tower (10744). Designed to withstand heavy landings and brutal bashing, this direct-replacement part restores the backbone of your rear suspension setup. ✅ Exact fit for Traxxas Mini Maxx✅ OEM durability – molded to handle impacts and flex✅ Pre-drilled for perfect shock alignment✅ Bolt-on design – installs with factory hardware✅ Restores factory geometry & stability 📦 What’s Included: (1) Rear Shock Tower Part #: 10744 💡 Pro Tip: Replace front and rear towers together for balanced suspension performance and long-term reliability.  

Read more less

Traxxas Mini Maxx Steel CV Driveshaft Set (4) – Part 10750XUpgrade Your Driveline. Dominate Every Hit. Get race-ready strength and consistent power delivery with the Traxxas Mini Maxx Steel CV Driveshaft Assemblies. Whether you're running front or rear, these heavy-duty constant-velocity shafts are designed to handle brutal torque, big air, and hard landings — without breaking a sweat. ✅ Full set of (4) steel CV driveshafts – for front or rear✅ Pre-assembled for quick install✅ Includes (4) hardened steel drive cups – built to last✅ Also includes (4) screw pins – everything you need✅ Perfect upgrade from stock plastic shafts 📦 Includes: (4) Steel CV Driveshafts (assembled) (4) Steel Drive Cups (4) Screw Pins Part #: 10750X 💡 Pro Tip: Run CVs front and rear for smoother power transfer, tighter steering, and less drivetrain slop.  

Read more less