Keep your suspension tight and responsive with the Team Associated B6 Ballcups. These molded plastic ballcups are designed for smooth operation and long-lasting performance, making them a must-have maintenance item or upgrade for your buggy. Features: Durable molded composite construction Provides a secure and smooth fit on ball studs Helps maintain precise suspension and steering geometry Replacement or spare set for your pit bag Includes:(12) Ballcups Compatibility: RC10B6 RC10B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D  

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

The Team Associated B6 Front Hinge Pin Brace is a genuine replacement part designed to restore strength and alignment to the front suspension of your RC10 platform. Precision-molded for a direct factory fit, this brace securely holds the front hinge pins in place, helping maintain consistent suspension geometry and reliable handling. Ideal for maintenance, rebuilds, or replacing damaged components after hard racing or bashing, this hinge pin brace installs easily and keeps your front end tight and predictable. Features: Genuine Team Associated replacement part Maintains proper front suspension alignment Durable construction for racing and off-road use Direct drop-in fit with no modifications required Includes: (1) Front Hinge Pin Brace Compatibility: Team Associated RC10B6 Team Associated RC10B6D Team Associated RC10B6.1 Team Associated RC10B6.1 Factory Lite Team Associated RC10B6.1D Team Associated RC10B6.2 Team Associated RC10B6.2D Team Associated RC10B6.3 Team Associated RC10B6.3D Team Associated RC10B6.4 Team Associated RC10B6.4D Team Associated RC10 SC6.1 Team Associated RC10 T6.1

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

Team Associated B6.1/B6.1D Caster & Steering Block Set (91776)Keep your front end tight and precise with this replacement caster and steering block set from Team Associated. Originally designed for the B6.1 and B6.1D buggies, this set also works great for compatible short course and stadium trucks like the SC6.1 and T6.1. ✅ Direct Replacement – For B6.1/B6.1D buggies✅ Multi-Platform Compatibility – Also fits SC6.1 and T6.1✅ Durable Construction – Built for precision and performance✅ OEM Fit – Ensures smooth steering and proper caster geometry 📦 Includes:– (1) Left Caster Block– (1) Right Caster Block– (1) Left Steering Block– (1) Right Steering Block Perfect for rebuilds, spares, or freshening up your front-end setup before the next race.

Read more less

Eliminate the slip. Gain the edge. Upgrade your B6-series buggy with the Factory Team Direct Drive Slipper Eliminator Kit — the precision solution for racers who demand instant throttle response and maximum efficiency. This setup removes the traditional slipper assembly and mounts the spur gear directly to the top shaft, reducing rotating mass by 30% for quicker acceleration and sharper control. Perfect for Stock or Spec class racing (17.5T / 21.5T motors), this kit delivers smoother power transfer and improved consistency on high-traction surfaces like clay or dirt. Key Features: Direct-drive top shaft eliminates the traditional slipper clutch 30% lighter than the stock slipper assembly Faster acceleration from reduced rotating mass Improved drivetrain efficiency may extend run times Ideal for Stock or Spec racing (17.5T / 21.5T) Precision-machined Factory Team quality ⚠️ Note: Not recommended for use on carpet — high-grip surfaces may overstress idler gears. Includes: (1) Top Shaft (Direct Drive) (1) Direct Drive Hub (3) M3x0.5x5mm BHCS Screws (1) M4 Locknut w/Flange Compatible With: RC10 B6.1 / B6.1 Factory Lite / B6.1D RC10 B6.2 / B6.2D RC10 B6.3 / B6.3D RC10 B6.4 / B6.4D RC10 SC6.1 / SC6.2 RC10 T6.2 Team Associated Factory Team – precision, performance, perfection.  

Read more less

Upgrade or replace your buggy’s diff with the Team Associated B6.1/B6.1D Gear Differential Kit — engineered for smooth, consistent power delivery and long-lasting performance. Features: Complete kit with all parts needed to build one high-quality gear differential Designed for precision fit and smooth operation in B6.1 and B6.1D models Durable materials built to withstand competitive racing demands Includes: All gears, seals, outdrives, and hardware for one complete gear diff Perfect for racers looking for reliable performance and tunability on any surface. Team Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6D

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

Refresh your suspension performance with the Team Associated B6.1/B6.1D Shock Caps & Spring Cups Set — the exact replacement parts included with the original B6.1 and B6.1D kits. This kit restores smooth, consistent shock action and leak-free performance with all-new caps, spring cups, o-rings, and bleeder screws. Perfect for maintenance, rebuilds, or keeping spares ready in your pit bag. Features Genuine Team Associated replacement parts Includes shock caps, spring cups, o-rings, and bleeder screws Restores smooth shock operation Direct fit with no modifications required Compatible Models RC10B6.1 RC10B6.1 Factory Lite RC10B6.1D RC10B6.2 RC10B6.2D RC10B6.3 RC10B6.3D RC10 B74 RC10 B74.1 RC10 B74.1D RC10 SC6.1 RC10 SC6.2 RC10 T6.2 Includes (4) Shock Caps (4) Spring Cups (4) O-Rings (4) Shock Cap Bleeder Screws

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

Keep your differential sealed and performing smoothly with the Team Associated B64 Differential Gasket & O-Ring Set. This genuine replacement set is designed to restore proper sealing and reliability in your drivetrain during maintenance or rebuilds. Features & Benefits: Genuine Team Associated replacement parts Ensures proper differential sealing and consistent performance Ideal for routine maintenance or diff rebuilds Compatibility: Team Associated RC10 B64D Team Associated B64 4WD Buggy Platform Includes: Differential gasket O-rings A must-have service item to keep your B64 drivetrain smooth, consistent, and race-ready.  

Read more less

Team Associated B64 Plastic Gear Differential Gear Set – ASC92076🔧 Smooth Power Transfer, Race-Ready Performance Keep your B64 running smooth with this genuine Team Associated Plastic Gear Differential Set. Whether you're rebuilding or replacing worn-out gears, this set includes everything needed for one full diff—ensuring reliable, consistent drivetrain performance on the track. ✅ Factory replacement for the RC10B64 series✅ Durable plastic gears for lightweight performance✅ Includes all internals needed for one differential rebuild 📦 Includes:• Complete internal gear set for one differential 🔢 Part Number: ASC92076🏁 Brand: Team Associated  

Read more less

Team Associated B74.1 3 Pad Slipper Conversion (Part #92282)Upgrade your ride with the Team Associated 3 Pad Slipper Conversion – perfect for drivers seeking smoother, more forgiving throttle control. This conversion replaces the stock 2-pad setup with a 3-pad system using a larger 19mm I.D. pad and a softer spring, ideal for dirt and low-traction tracks. ✅ Smoother engagement✅ Better throttle feel✅ Includes instructions for easy install Compatibility: B74.1 B74.1D (requires ASC92275 slipper shaft outdrive set) B74.2 B74.2D B74.2 CE Swap it in and feel the difference where it counts – on the track!  

Read more less

Fine-tune your steering geometry with the 4° Caster Blocks from Team Associated. These precision-molded components set the front suspension caster angle, helping you balance steering response, stability, and cornering performance to match track conditions. 🔥 Key Features: 4° caster angle for balanced steering and stability Molded composite construction for durability and precision fit Direct replacement part for worn or damaged caster blocks Designed for race-proven suspension geometry Easy installation with factory hardware ✅ Compatibility: Team Associated TC7 OriginalTeam Associated TC7.1Team Associated TC7.2 📦 Includes: (1) Left Caster Block (4°) (1) Right Caster Block (4°) ⚠️ Tip:Changing caster affects corner entry and straight-line stability—less caster = more steering response, more caster = better stability.

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

🏁🔧 Genuine Team Associated Replacement CVA Bones The Team Associated CVA Bone Set is a replacement drivetrain component designed to restore smooth and reliable power transfer in compatible Team Associated vehicles. Manufactured to Team Associated specifications, these CVA bones provide dependable performance and precise fitment for your drivetrain assembly. Ideal for routine maintenance, repairs, or keeping spares in your pit box. 🔧 Features ✔ Genuine Team Associated replacement part✔ Precision-manufactured for proper fit and function✔ Durable drivetrain component✔ Helps maintain smooth power transfer✔ Direct replacement for worn or damaged CVA bones✔ Sold as a pair 📦 Includes (2) CVA Bones 💡 Recommended Maintenance Team Associated recommends replacing the: CVA Barrel CVA Pin (ASC91438) when installing new CVA bones to ensure optimal drivetrain performance and longevity. 💡 Perfect For ✔ Routine maintenance✔ Drivetrain rebuilds✔ Race-day spare parts✔ Replacing worn CVA components✔ Maintaining smooth drivetrain operation ⚠️ Notes Verify compatibility with your vehicle before installation CVA barrel and pin sold separately (ASC91438)  

Read more less

Team Associated CVA Bone, 66mm: RC10B74 – ASC92212🔩 Smooth Power. Built to Last. Keep your drivetrain locked in and reliable with the Team Associated 66mm CVA Bones for the RC10B74! These factory replacements are built to handle serious racing loads while delivering ultra-smooth power transfer through your suspension. A must-have part for anyone looking to keep their 4WD buggy running at peak performance. 🛠️ Features:✅ Genuine Team Associated quality✅ 66mm length – perfect factory fit✅ Built tough for high-performance racing✅ Ideal for spares or replacing worn components 📦 Includes:• (2) CVA Bones (66mm) 💡 Compatibility:✔️ Team Associated RC10B74 🔢 Part Number: ASC92212🏁 Brand: Team Associated

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

 🏁 Factory Precision. Reliable Suspension Geometry. Race-Ready Performance. Keep your Team Associated DR10M performing at its best with the genuine Team Associated Arm Mount "D". Designed to maintain accurate rear suspension geometry, this factory replacement arm mount ensures consistent handling, durability, and a perfect fit every time. Whether you're replacing a damaged component or freshening up your race car, using genuine Team Associated parts helps keep your DR10M handling exactly as the engineers intended. ⚡ Features: 🏁 Genuine Team Associated replacement part⚙️ Maintains precise rear suspension geometry💪 Durable molded composite construction for long-lasting performance🎯 Factory fit for easy installation🔧 Ideal for routine maintenance, repairs, or race-day spares🚀 Helps restore consistent handling and suspension alignment 📦 Includes: (1) Team Associated Arm Mount "D" 📏 Specifications: Part Number: ASC72079 Type: Rear Arm Mount "D" Material: Composite 🔧 Compatibility: ✅ Team Associated DR10M 💡 Pro Tip: Suspension arm mounts play a critical role in your car's handling by controlling suspension geometry. If an arm mount becomes bent or damaged after a hard impact, replacing it with a genuine Team Associated part helps restore proper alignment and predictable handling on the track. 🏁🔧🚗    

Read more less

Durable. Precise. Ready for the strip.The Team Associated DR10M Suspension Arm Set is a direct replacement designed specifically for your DR10M drag car. Crafted from high-strength composite material, these arms deliver the ideal blend of rigidity and flex for consistent traction, smooth launches, and precise straight-line stability. Whether you're repairing crash damage or refreshing your suspension setup, this factory-original set ensures your DR10M stays race-ready and performing at its best. ⚙️ Features Genuine Team Associated factory replacement parts Durable composite construction for strength and consistency Precision molded for perfect fit and alignment Keeps your DR10M handling smooth and stable on every pass 📦 Includes (1) Complete DR10M Suspension Arm Set ✅ Compatibility Team Associated DR10M    

Read more less

Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm) – Fine-Tune Your Suspension! 📈 Dial in your shock performance with the Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm). These precision-machined pistons are ideal for customizing your shock's rebound and compression characteristics, allowing racers to adapt to various track conditions and driving styles. 🔧 Key Features: ✅ 13mm piston diameter with 2x1.9mm holes✅ 2.5mm thickness for controlled oil flow✅ CNC-machined for consistent performance✅ Ideal for tuning shock response and rebound speed✅ Factory Team quality for precision suspension setups 📦 Includes: (2) 13mm Shock Pistons (2x1.9mm, 2.5mm thick) ✅ Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 B6.4 Team Associated RC10 B6.4D Team Associated RC10 B74.2 Team Associated RC10 B74.2D Team Associated RC10 B74.2 CE 💡 Precision matters.Upgrade your suspension tuning with these Factory Team pistons for the ultimate in control and consistency. 🏆  

Read more less

Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes: (2) 3.5x45mm Titanium Turnbuckles (4) 3.5x42mm Titanium Turnbuckles (1) 3.5x35mm Titanium Turnbuckle COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

  The Team Associated Factory Team 5x12x4mm Bearings are precision replacement bearings designed to restore smooth operation and reliable performance in critical drivetrain and rotating assemblies. Built to Factory Team standards, these bearings help reduce friction, improve efficiency, and maintain consistent performance on the track. Ideal for replacing worn bearings during maintenance or rebuilds to keep your vehicle operating at peak performance. Features Genuine Team Associated Factory Team bearings Precision construction for smooth rotation Helps reduce drag and improve efficiency Ideal for maintenance or performance rebuilds Factory-fit replacement Includes (4) 5x12x4mm Bearings Compatibility Team Associated RC10 B74 Other applications requiring 5x12x4mm bearings A dependable replacement choice for maintaining smooth, consistent performance in your RC vehicle. 🏁

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

A simple, essential pit tool for fast and precise adjustments. The Factory Team Aluminum Turnbuckle Wrench is lightweight, durable, and designed to fit 1/8" turnbuckles, making it perfect for quick setup changes at the track or on the bench. Features & Benefits: Precision aluminum construction Lightweight and durable Fits standard 1/8" turnbuckles Compact size—easy to keep in any pit box A must-have wrench for clean, accurate turnbuckle adjustments when it matters most.  

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Team Associated Factory Team B6.4/B6.4D 3.5x48mm Titanium Turnbuckles. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two 3.5x48mm turnbuckles. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Speed up turnbuckle assembly with the FT Ball Cup Wrench—a must-have tool for racers and builders running the 6-series platform. Designed to grip ball cups securely, this wrench makes assembly quick, easy, and consistent. Features & Benefits: Makes assembling turnbuckles fast and effortless Precision fit for 6-series platform ball cups Hard-anodized finish for durability Laser-etched identification Knurled outer diameter for a comfortable, secure grip Lightweight and compact—perfect for the pit box Compatibility: RC10B6 RC10B6D RC10B64 RC10B64D RC10B6 Club Racer RC10B64 Club Racer Pro Tip: Pair it with the #1114 FT Dual Turnbuckle Wrench for the fastest turnbuckle builds possible.  

Read more less