Smooth, sealed, and ready for anything.Upgrade your Traxxas® Mini Maxx® 2S with the RC Screwz Stainless Steel Rubber Shielded Bearing Kit, engineered for maximum durability and performance. Each kit includes high-quality metal and rubber shielded bearings to keep your drivetrain running smoother, cleaner, and longer — whether you’re racing or bashing in the dirt. Precision Performance. Long-Term Reliability.Rubber-shielded bearings block out dust and grime for top off-road protection, while metal-shielded bearings deliver low rolling resistance and maximum speed. Every kit is organized in a reusable storage case and includes extra bearings for quick replacements when you need them most. 💪 Features: High-quality metal and rubber shielded bearings for all-around performance Includes all standard, flanged, one-way, and thrust bearings (if required) Extra bearings included for on-demand replacements Reusable storage container keeps everything organized Rubber-shielded bearings: best defense against dirt and debris Metal-shielded bearings: lowest friction for high-speed efficiency Rubber bearings pre-greased — short break-in period for peak performance 📦 Includes: Complete bearing set plus one extra of every size: (5) 5x8x2.4mm bearings (5) 5x10x4mm bearings (5) 5x11x4mm bearings (5) 7x14x3.5mm open bearings (5) 7x14x5mm bearings (5) 8x16x5mm bearings (5) 10x15x4mm bearings (5) 12x18x4mm bearings Reusable plastic storage case ✅ Compatibility: Traxxas® Mini Maxx® 2S    

Read more less

Smooth, sealed, and ready to race.Upgrade your Traxxas® Slash® 4×4 BL-2s 1/10 with the RC Screwz Rubber Shielded Bearing Kit, precision-engineered for maximum durability and performance. Each kit includes a complete set of high-quality metal and rubber-shielded bearings that keep your drivetrain rolling free and protected from dirt, dust, and debris. Precision Performance. Ultimate Protection.Metal-shielded bearings deliver minimal rolling resistance for peak efficiency, while rubber-shielded bearings provide unbeatable sealing for off-road use. Every kit comes neatly organized in a reusable storage case and even includes extra bearings for quick swaps or future maintenance—perfect for racers and bashers alike. 💪 Features: Premium metal and rubber-shielded bearings for smooth operation Includes all standard, flanged, one-way, and thrust bearings (if required) Extra bearings included for on-demand replacements Reusable plastic case keeps parts clean and organized Metal shields = less friction → higher speed Rubber shields = maximum dirt defense → longer life Pre-greased bearings require a short break-in for peak performance 📦 Includes:Complete bearing set + (1) extra of each size: 5×8×2.4 mm bearings 5×11×4 mm bearings 6×12×4 mm bearings 8×16×5 mm bearings 10×15×4 mm bearings 12×18×4 mm bearings Reusable storage case ✅ Compatibility: Traxxas® Slash® 4×4 BL-2s 1/10 (#68386-4)      

Read more less

🔩🚙 Complete Upgrade. Rust-Free Hardware. Built for Crawling. Upgrade your Traxxas TRX-4M Defender with this complete RC Screwz Stainless Steel Screw Kit. Designed as a full hardware replacement, this kit delivers improved durability, corrosion resistance, and long-term reliability for your crawler. 🏁 About This Screw Kit 🔄 Full Hardware Conversion This kit is 100% complete, including all major screw types plus extras—everything needed to replace your stock hardware. 🛡️ Stainless Steel Strength Made from premium stainless steel, these screws resist rust, corrosion, and wear—perfect for crawling environments. 🔧 Cleaner Builds & Easier Maintenance Upgrading your hardware helps prevent stripped heads and makes future maintenance smoother and more reliable. 🔧 Key Features ✔ Complete stainless steel screw kit✔ Designed for TRX-4M Defender platform✔ Corrosion and rust resistant✔ Stronger and more durable than stock screws✔ Includes extras for convenience✔ Helps reduce stripped screw heads✔ Includes hex wrenches and storage case✔ Backed by RC Screwz satisfaction guarantee 📦 Includes Socket Head Screws (+ extras) Button Head Screws (+ extras) Flat Head Screws (+ extras) Set Screws (+ extras) Nuts & Washers (+ extras) Bondhus Short Arm Hex Wrenches (all sizes) Reusable Plastic Pit Case 🚗 Compatibility Traxxas TRX-4M Defender (1/18 Scale) 🧰 Installation Notes Use grease or wax on threads to prevent stripping Some small screws may remain Phillips head for added strength Refer to your vehicle manual for screw locations 💡 Perfect For ✔ Full crawler rebuilds✔ Corrosion-resistant upgrades✔ Long-term durability improvements✔ Clean, professional builds

Read more less

This is an optional RCScrewz Stainless Steel screw kit for the Traxxas Maxx. RCScrewz Stainless Screw Kits are 100% complete. Your kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. RCScrewz kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and RCScrewz Guarantee's it. If for any reason you're not 100% satisfied with your kit, return your screw kit to RCScrewz and they will send you a full refund for the price of the kit.All RCScrewz Kits include: All socket screws + Extras Button Screws + Extras Flat Head Screws + Extras Set Screws + Extras Nuts + Extras Washers + Extras Bondhus Short Arm hex Wrenches Quality Reusable plastic pit case General Screw Installation & Notes:  Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the the kits remain phillips heads but are still stainless steel. This has been done for strength, as a result of RC Screwz field testing, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations. Specialty / Patent Pending parts are not included (ex: TRA3967 suspension/hinge pin & TRA3640 barrel/shoulder screw location pin). COMPATIBILITY: Traxxas Maxx

Read more less

Upgrade your rear suspension with genuine Factory Team Carbon Rear Suspension Arms for the RC10T7 and RC10SC7 platforms. Designed for racers who demand precision and consistency, these arms increase rigidity and reduce flex under high-load conditions, giving you a more predictable and controlled feel on the track. Built using AE’s legendary carbon composite material, they offer the perfect balance of strength, durability, and lightweight performance — exactly what competitive racing requires. Features Factory Team performance upgrade Constructed from AE carbon composite material Increased rigidity over stock arms Reduces flex under hard cornering and acceleration Enhances durability and structural integrity Improves overall handling consistency Includes (2) Rear Factory Team Carbon Suspension Arms Designed specifically for: RC10T7 RC10SC7 A race-proven upgrade that delivers stronger, more consistent rear-end performance when it matters most. 🏁  

Read more less

 Take your Losi 1/12 NASCAR beyond the oval! These RCAWD all-terrain tires are built with premium rubber, aggressive tread, and a pre-glued design so you can hit any surface with confidence — from smooth asphalt to rough dirt and even wet conditions. Premium rubber compound for durability and consistent grip Aggressive all-terrain tread pattern for on-road & off-road use Excellent water-draining design for traction in wet conditions Impact-resistant structure stands up to rocks, bumps, and jumps Pre-glued for quick, hassle-free installation — no glue required Compatible with all Losi 1/12 NASCAR RC models Includes: (4) Pre-Glued Wheel Tires Upgrade your Losi NASCAR with the RCAWD All-Terrain Tire Set and enjoy grip, control, and durability on any surface.  

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Reedy RT5012A Digital Hi-Torque 1/8 Competition Brushless Servo (High Voltage) 🔥 Ultimate Power & Precision for 1/8 Buggy & Truggy Racing! 🚗💨 The Reedy RT5012A HV Digital Competition Servo is built for serious racers looking for unmatched torque, precision, and durability in 1/8-scale buggies and truggies. Featuring a powerful brushless motor, ultra-precise metal gears, and a full aluminum case, this high-voltage servo delivers fade-free performance with optimized speed and response. 🏆 Whether you're competing in intense off-road races or bashing at high speeds, the RT5012A ensures reliable steering and throttle control, providing faster, more consistent lap times. ✨ Key Features: 🔥 High-Torque Brushless Motor – Provides maximum power & reliability 🛠️ CNC-Machined Full Aluminum Case – Reduces operating temperatures for fade-free performance 💦 Waterproof Construction – Ensures durability in all weather conditions ⚙️ Ultra-Precise Metal Gears – Designed for exceptional strength & longevity 🔩 Dual Ball Bearings – Enhances smooth operation & efficiency ⚡ High-Voltage Compatible (Up to 8.4V) – Supports LiPo-HV RX batteries for maximum performance 🏁 Optimized Speed & Response – Tuned for steering & throttle applications in 1/8 competition racing 📊 Specifications: Input Voltage: 4.8 - 8.6V Motor Type: Brushless Speed (sec/60°): 6.0V: 0.148 7.4V: 0.133 8.4V: 0.118 Torque (kg-cm/in-oz): 6.0V: 37.2 kg-cm / 517 oz-in 7.4V: 44.2 kg-cm / 614 oz-in 8.4V: 50.1 kg-cm / 696 oz-in Dimensions: 40 x 20 x 37.5mm Weight: 82g Spline: 25T ✅ Compatibility: ✔ Pro2 DK10SW✔ Pro2 LT10SW✔ Pro2 RT10SW✔ RC8B4 / RC8B4.1 / RC8B4.1e / RC8B4e✔ RC8T4 / RC8T4e✔ Rival MT8 🏁 Dominate the Track with Precision & Power! 🔥 Whether you're looking for lightning-fast response, extreme torque, or race-winning consistency, the Reedy RT5012A HV Digital Brushless Servo delivers pro-level performance for competitive RC racing. 💨 Upgrade today and experience next-level steering & throttle control! 🏆🏁

Read more less

The Reedy Sonic 540-FT 13.5T Competition Brushless Motor delivers professional-level performance at an affordable price. Designed for spec racing, clubs, and racing series where equalized performance is key, this ROAR-approved motor combines precision engineering with durability and ease of maintenance. Featuring a lightweight CNC-machined can, high-strength balanced rotor, and dual ball bearings for smooth operation, the 540-FT offers exceptional value without compromising performance. Its fixed 45-degree timing ensures consistent power delivery and reliability for all racers. ⚙️ Features: CNC-machined lightweight aluminum can for superior cooling and precision High-strength balanced rotor for smooth, efficient operation Dual precision ball bearings for long-lasting performance Fixed 45° timing for consistency and spec-class fairness Easy-to-solder tabs for clean wiring and quick installation Fully rebuildable design for extended motor life ROAR approved for sanctioned competition use 📏 Specifications: Turns: 13.5T Timing: Fixed (45°) Input Voltage: 1–2S LiPo Diameter: 35.8 mm Length: 51.8 mm Shaft Diameter: 3.15 mm Weight: 175 g 📦 Includes: (1) Reedy Sonic 540-FT 13.5T Fixed Timing Brushless Motor 💡 Pro Tip:Pair the Sonic 540-FT with a Reedy Blackbox 600Z ESC and Reedy LiPo 2S Shorty Pack for a smooth, balanced, and race-ready setup right out of the box.  

Read more less

Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty – High-Performance, Low-Profile Power! Maximize your racing potential with the Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo, engineered with cutting-edge advancements in LiPo cell manufacturing and battery construction. Designed for elite on-road and off-road competition, this battery delivers higher power output, lower internal resistance, and increased durability, ensuring consistent voltage from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Improves efficiency, reliability, and power output.✅ High-Voltage (HV) 7.6V Design – Safely charges to 4.35V/cell for maximum performance.✅ Flat Discharge Curve – Sustains higher voltage deeper into the race for consistent power delivery.✅ High Capacity & 135C Discharge Rate – Delivers explosive acceleration and extended runtime.✅ Durable Hard Case – Protects against damage in high-impact racing environments.✅ Low-Resistance Embedded Connectors – Minimizes power loss for peak efficiency.✅ ROAR & BRCA Approved – Legal for competitive racing.✅ Male ESC Connectors Included – Ensures plug-and-play compatibility. Precision Power for Competitive Racing! 🏁 Why Choose the Reedy Zappers SG6 4000mAh? Low-profile (LP) design for better weight distribution and improved handling. Higher voltage retention throughout the race ensures stronger acceleration and consistent performance. Ideal for both on-road & off-road racing, including 1/8 eBuggy and 1/10 scale competition. Proven durability and extended cycle life for long-lasting, race-winning performance. 🔥 Race with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4000mAh Voltage: 7.6V (2S) Max Charge Rate: 8.0A Discharge Rate: 135C Dimensions: 95.8mm x 46.8mm x 18.5mm Weight: 162g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4000mAh 135C LP Shorty is designed for racers demanding high-voltage, low-profile performance. Whether you're competing in tight indoor tracks or wide outdoor circuits, this power-dense battery delivers the speed, consistency, and durability needed to win. 🔥 Upgrade your setup today and experience next-level power with Reedy Zappers SG6! 🏁💨

Read more less

Add a custom look and premium durability to your wheels with the REEFS RC SLUICE Beadlock Rings. Precision machined from aluminum and finished in a bold blue anodized coating, these rings are designed to upgrade both the style and strength of your crawler setup. Built specifically for REEFS 1.9 aluminum wheels, the SLUICE rings provide a secure beadlock hold while enhancing the overall appearance of your rig with a clean, detailed design. 🔧 Features:• Precision machined aluminum construction• Durable blue anodized finish• Designed for REEFS 1.9 aluminum wheels• Provides secure beadlock tire mounting• Enhances wheel style with a clean SLUICE design 📦 Includes:• (2) SLUICE 1.9" Beadlock Rings ⚙️ Specifications:• Wheel Size: 1.9"• Color: Blue Upgrade your crawler’s look and performance with the REEFS SLUICE beadlock rings, built for durability, style, and a perfect fit.    

Read more less

⚙️💪 Small Servo, Serious Upgrade for Your TraxxasThe REEFS RC 55Micro Waterproof Digital Micro Servo is designed as a direct drop-in option for Traxxas TRX-4 models with shifting servos and the TRX-4M platform. High-voltage capable with an operating range up to 8.4V, this compact servo combines all-steel gears, a CNC-machined aluminum case, and waterproof construction for reliable performance in demanding RC environments.🏁 About the 55Micro Servo⚡ High-Voltage PerformanceThe 55Micro operates from 4.8V to 8.4V, delivering up to 55 oz-in of torque and speeds as quick as 0.08 sec/60° at 8.4V.🔧 Built for DurabilityAll-steel gears provide drivetrain strength, while the fully CNC-machined aluminum case adds durability and helps dissipate heat during operation.💧 Waterproof & ProgrammableWaterproof construction makes the 55Micro well suited for trail and crawling environments. The servo is also fully programmable using the optional REEFS USB Link Adapter.✨ Features✔ Direct drop-in fit for compatible Traxxas applications✔ High-voltage capable✔ 4.8V–8.4V operating range✔ Waterproof design✔ Durable all-steel gears✔ Digital coreless motor✔ CNC-machined aluminum case✔ Fully programmable with optional REEFS USB Link Adapter✔ 25T output spline✔ Compact micro-servo design📊 Specifications Speed @ 6.0V: 0.11 sec/60° Speed @ 7.4V: 0.09 sec/60° Speed @ 8.4V: 0.08 sec/60° Torque @ 6.0V: 41 oz-in (2.95 kg-cm) Torque @ 7.4V: 48 oz-in (3.45 kg-cm) Torque @ 8.4V: 55 oz-in (3.96 kg-cm) Motor: Digital Coreless Operating Voltage: 4.8–8.4V Dimensions: 0.90 x 0.50 x 0.86 in (22.9 x 12.8 x 22mm) Weight: 0.67 oz (19g) Spline: 25T📦 Includes (1) REEFS RC 55Micro Waterproof Metal Gear Digital Micro Servo Assorted Servo Horns Mounting Hardware🔧 Compatibility Traxxas TRX-4 with shifting servos Traxxas TRX-4M📝 Notes Recommended as an upgrade for TRX-4 and TRX-6 models with shifting servos. Suitable for stock/lightweight TRX-4M applications. Not recommended for heavily modified TRX-4M builds. REEFS USB Link Adapter (SEHREEFS64) required for programming and sold separately.  

Read more less

The Reefs RC Beast 1000 is a no-compromise 1/5-scale high-voltage brushless servo built for extreme torque, speed, and durability. Delivering up to 1080 oz-in of torque at 8.4V with lightning-fast response, the Beast 1000 is designed for large-scale bashers, racers, and crawlers that demand maximum steering authority. Featuring a brushless motor, steel gear drivetrain, CNC aluminum case, and a 7-point waterproof sealing system, this servo is ready to perform in the harshest environments with precision and reliability. BEC not required, but recommended for maximum performance. Key Features High-torque, high-speed brushless servo Up to 1080 oz-in torque @ 8.4V Magnetic angle sensor for precise positioning Fully waterproof (7-point seal system) Pulse width modulation (PWM) control Steel gears with CNC aluminum casing Dual servo horn options included Designed for extreme 1/5-scale applications Specifications Voltage: 4.8V – 8.4V Torque: 800 oz-in @ 6.0V 900 oz-in @ 7.4V 1080 oz-in @ 8.4V Speed: 0.11 sec/60° @ 6.0V 0.095 sec/60° @ 7.4V 0.08 sec/60° @ 8.4V Motor: Brushless Gear Material: Steel Case: CNC Aluminum Bearings: 5 Ball Bearings Spline: 15T Dead Band Width: 2 μSec Mechanical Angle: No limit Wire Gauge: 22AWG Weight: 10 oz (285g) Dimensions (L×W×H): 2.59 × 1.18 × 2.32 in Includes (1) Reefs RC Beast 1000 Servo (1) Single servo horn (1) Double servo horn Mounting hardware Part Number: SEHREEFS102 Built for drivers who demand extreme torque, fast response, and rock-solid reliability, the Beast 1000 lives up to its name.  

Read more less

Reefs RC Shorty Micro Servo Horn (Black) (25T) (SEHREEFS131) ⚙️🛠️ Compact Strength for Your Micro Servo Setup The Reefs RC Shorty Micro Horn is a durable aluminum upgrade designed specifically for micro servos requiring a 25-tooth spline. Precision CNC machined for strength and accuracy, this compact servo horn provides dependable steering performance while offering multiple linkage mounting positions for tuning flexibility. Ideal for crawlers, trail rigs, and other micro-scale applications, the Shorty Micro Horn delivers the reliability and precision Reefs RC is known for. 🏁 About the Shorty Micro Horn 💪 Built to Last Machined from high-quality aluminum, this servo horn offers significantly improved durability over plastic alternatives, helping withstand the demands of off-road driving and crawling. ⚙️ Adjustable Linkage Positions Featuring three mounting holes, drivers can fine-tune steering response and throw to match their specific setup and driving style. 🎯 Precision Performance The CNC-machined construction provides a secure fit on compatible servos while minimizing flex for improved steering consistency. 🔧 Features ✔ Precision CNC-machined aluminum construction✔ Durable black anodized finish✔ Designed for 25T micro servo splines✔ Shorty-style servo horn design✔ Three linkage mounting positions✔ Provides precise steering response✔ Increased durability over plastic servo horns 📦 Includes (1) Reefs RC Shorty Micro Servo Horn 📊 Specifications Specification Details Spline 25T Micro Overall Length 19mm Screw Hole Diameter 2mm Spline to Outside Hole 13.1mm Material CNC Machined Aluminum Color Black 🚗 Compatibility Designed for use with micro servos featuring a 25T spline, including: Reefs RC 99Micro Servo Reefs RC 179Micro Servo May fit other micro servos utilizing a 25T spline. Verify specifications before installation. 💡 Perfect For ✔ Micro crawlers✔ Trail trucks✔ Steering upgrades✔ Replacing worn plastic servo horns✔ Drivers seeking improved durability and precision ⚠️ Notes Designed for micro servos with a 25T spline. Verify servo spline compatibility before installation. Mounting hardware may vary depending on servo application. 💡 Pro Tip: Aluminum servo horns help eliminate flex commonly found in plastic horns, providing more direct steering feel and improved durability in demanding micro RC applications. ⚙️🛻🏁    

Read more less

Upgrade the steering precision of your micro crawler with the Reefs RC SX30 Aluminum Servo Arm & Ball Stud (SEHREEFS286). Designed specifically for the Reefs RC SEHREEFS285 SX30 servo, this precision-machined aluminum servo arm eliminates the flex commonly found in stock plastic servo horns. The rigid machined aluminum construction improves steering consistency and durability, helping deliver more accurate steering response during demanding trail runs. A 20T spline ensures a precise fit on the SX30 servo, while the included stainless steel pivot ball provides increased strength and long-term reliability. For added convenience, the hardware features preinstalled thread lock, helping keep everything secure during installation and extended use. Features• Machined aluminum servo arm for improved strength• 20T spline designed for the SEHREEFS285 SX30 servo• Eliminates flex found in stock plastic servo horns• Black anodized finish with etched Reefs RC logos• Stainless steel pivot ball for increased durability• 2mm upgraded thread size for improved strength• Preinstalled thread lock for easy installation Includes• (1) Aluminum Servo Arm• (1) Stainless Steel Pivot Ball  

Read more less

 ⚙️ Ultimate Crawler Control. Front & Rear Dig. Built-In Overdrive. Take your custom crawler to the next level with the REEFS RC XP Dual Dig Transmission. Engineered for serious rock crawling, this advanced transmission gives you independent dig functionality with smooth, precise engagement for tighter turns, better positioning, and maximum control on technical terrain. At the heart of the system is REEFS RC's patent-pending Revolve Dig technology, providing three-position operation—Drive, Free-Wheel, and Locked—with clean engagement and release without needing to bump the throttle. ⚡ Features: 🪨 Advanced dual-dig transmission for custom crawler builds🎯 Three-position dig operation: Drive / Free-Wheel / Locked⚙️ Patent-pending Revolve Dig Plate design🚀 Smooth, immediate engagement and disengagement🔄 Built-in 22% overdrive for increased front-end pull💪 Hardened steel 48P gears and shafts🛡️ CNC-machined aluminum transmission housing⚖️ Lightweight design without sacrificing drivetrain strength🔧 Forward motor mounting configuration🎮 Integrated servo mounting🏁 Ball-bearing-supported drivetrain🔩 Includes aluminum servo horns🔥 Designed for high-performance and competition crawler setups 📦 Includes: (1) REEFS RC XP Dual Dig Transmission Aluminum Servo Horns 🔧 Needed to Complete: (2) REEFS 99 Micro Servos or (2) REEFS 179 Micro Servos Servos are not included. 📏 Specifications: Part Number: SEHREEFS264Color: BlackGear Pitch: 48PBuilt-In Overdrive: 22%Housing Material: CNC-Machined AluminumGear/Shaft Material: Hardened Steel Length:Housing – 63mmShaft End-to-End – 81mm Width: 60mm Height:Housing – 45mmTop of Shift Arm – 59mm 💡 Pro Tip: Dual dig gives advanced crawler drivers significantly more control over vehicle positioning. With the ability to switch between drive, free-wheel, and locked modes, you can tighten your turning radius, reposition the chassis on technical obstacles, and better control the front or rear of the rig. Combine that with the built-in 22% overdrive, and the XP is designed for serious technical crawling where precision matters. Tech Note: Requires two REEFS 99 or REEFS 179 Micro Servos for dig operation.

Read more less

The XPT3 LCG Transmission from Reefs RC is a purpose-built, ultra-compact drivetrain upgrade engineered for competitive 1/10 crawlers. Weighing in at just 75 grams, the XPT3 delivers a true low-CG advantage without sacrificing strength or reliability. Designed with a machined aluminum case, hardened steel gears, and titanium output shafts, this transmission is built to take abuse while maintaining smooth, precise power delivery. The forward motor mounting improves balance and packaging, while 48-pitch gearing and an easy-set gear mesh with protective cover keep performance consistent even in harsh trail conditions. Whether you’re running straight axles or portals, the XPT3 offers flexible gearing options to dial in the perfect final drive for your setup—making it a serious upgrade for high-end crawler builds. 🔧 Features Ultra-lightweight design — only 75g Compact low-profile (LCG) transmission layout CNC-machined aluminum case for durability Hardened steel gears for long service life Titanium output shafts for maximum strength Forward motor mounting for improved balance Smooth-running 48-pitch gears Easy gear-mesh setup with debris-blocking cover 📐 Specifications Weight: 75g Pinion Range: 11T–20T (48p) Transmission Ratio: 6.75:1 – 12.27:1 Final Drive Ratios (FDR): Straight Axle: 25.31:1 – 46.02:1 Axial Portal Axle: 48.52:1 – 88.21:1 Vanquish F10 Portal Axle: 35.44:1 – 64.43:1 📦 Includes (1) Reefs RC XPT3 LCG Transmission (Silver) ⚠️ Pinion Recommendation Straight axles: 11T Portal axles: 14T(May vary depending on rig setup and motor choice) ✅ Compatibility Axial SCX10 II Axial SCX10 III Vanquish Products VRD Vanquish Products VS4-10 A premium transmission built for serious crawlers—lightweight, strong, and engineered to win.

Read more less

Unmatched Grip. Proven Performance. Engineered for RCP tracks and fine-tuned through extensive testing across the USA, the Reflex Racing 11mm Radial Tire (30°) delivers elite-level traction, corner stability, and forward bite. Designed from the ground up for competitive Mini-Z racers, this tire provides consistent performance and superior control lap after lap — trusted by both pros and weekend racers alike. Advanced Radial Design Unlike traditional directional tires, the Reflex Racing Radial features a non-directional tread pattern precision-cut directly into the slick — not molded over it. This design reduces tread flex under load, resulting in incredible stability during rotation and enhanced exit traction. Even as the tread wears down, performance remains sharp and consistent for longer track life. Optimized for Corner Speed The 11mm tire is 25.25mm in diameter (when mounted with super glue), optimized for maximum corner speed and smooth rotation. The 30° compound performs across a wide temperature range — from 45°F to 80°F — maintaining reliable grip in changing track conditions. For ultra-high grip environments, simply trim the tire for more rotation in tight corners. Features: Designed specifically for RCP track surfaces Non-directional radial tread for even wear and stable handling Superior cornering stability and exit traction Long-lasting 30° compound performs even after visible tread wear Optimized 25.25mm diameter for faster corner speed Proven performance by racers nationwide Includes: (2) Reflex Racing 11mm Radial Tires – 30°(Wheels not included; shown for reference only) Reflex Racing — Precision. Performance. Proven.

Read more less

The Revolution Design Aluminum Clamping Servo Horn is a precision steering upgrade designed for the XRAY XB2 platform. Machined from high-quality 7075 aluminum, this lightweight and durable servo horn features a secure clamping design to minimize play and provide precise, consistent steering response. About the Aluminum Clamping Servo Horn Precision Steering Upgrade The clamping design provides a tight, secure fit on compatible 23T servo splines, helping reduce unwanted play in the steering system. High-strength 7075 aluminum construction delivers excellent rigidity without unnecessary weight.A silver chamfer and laser-etched RDRP logo complete the premium race-inspired appearance. Features ✔ High-quality 7075 aluminum construction✔ 23T servo spline✔ Designed for Hitec and Sanwa servo applications✔ Secure clamping design✔ Helps reduce steering play✔ Lightweight and extremely strong✔ Silver chamfer detailing✔ Laser-etched RDRP logo✔ Designed for precise steering response Includes (1) Revolution Design Aluminum Clamping Servo Horn Specifications Specification Details Brand Revolution Design Part Number RDRP-0665 Product Type Clamping Servo Horn Material 7075 Aluminum Spline 23T Servo Compatibility Hitec / Sanwa Quantity 1 Compatibility Compatible with: XRAY XB2 Original XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt Notes Designed for compatible 23T servo splines. Verify your servo spline count before installation. Servo and vehicle are sold separately.

Read more less

Compact, efficient, and competition-ready — the Rocket-RC TS80-PRO 80A Brushless Sensored ESC is designed for 1/10 stock class racing and 1/14 scale competition. With precision engineering and powerful output, it delivers smooth throttle control, reliable braking, and durability for serious racers. ⚡ Features: Compact size perfect for 1/14 & 1/10 scale vehicles Efficient aluminum casing with machined heatsink High-performance cooling fan (23,000 RPM @ 7.2V) Built-in Super BEC for stable power delivery Programmable with optional LED V2 Program Card (KS-300004-00) Pre-installed XT60 battery connector Factory preset: Forward/Brake (can be adjusted to Forward/Brake/Reverse) 🔧 Specifications: Dimensions: 29.5 x 29.5 x 24mm (with fan) Weight: 62g (with wires) Voltage Input: 6V–11V (2S LiPo) Continuous Current: 80A Peak Current: 160A Motor Limit: Over 13.5T (540) / Over 10.5T (380/390) Motor Type: Sensored 380 / 390 / 540 Brushless Motors BEC: 3A / 6V Multi-Protection System: Yes 📦 Includes: (1) Rocket-RC TS80-PRO 80A Brushless Sensored ESC XT60 Battery Connector (installed)

Read more less

This is an optional set of RPM 4S Kraton and Outcast Front Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less

This is an optional set of RPM 4S Kraton and Outcast Rear Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less

RPM Extra Wide Front Bumper (Black) – RPM80042 Front-End Armor for Your Associated RideThe RPM Extra Wide Front Bumper is built for drivers who don’t hold back. With a full 6 inches of durable protection, this upgrade guards your chassis during head-on impacts and hard landings — perfect for bashing, racing, or rough terrain adventures. ✅ Features: 📏 6-inch width for maximum front-end coverage 🧱 High-strength RPM nylon absorbs big hits without cracking 🏁 Reinforced ribs double as skid rails for gliding over obstacles 🛬 Extra protection from hard landings and crash damage ⚙️ Direct fit for popular Associated models with no hassle 📦 Includes: (1) RPM Extra Wide Front Bumper (Black) 📊 Specifications: Material: RPM nylon composite Width: 6 in Color: Black Compatibility: Fits vehicles using Associated bulkheads #91359, #91364, or #9562 Compatible Models: Team Associated Trophy Rat Pro2 RT10SW RB10 B5 T5 Whether you bash or race, the RPM Extra Wide Front Bumper adds serious protection where it counts. Don’t just survive impacts — dominate them. 💥

Read more less

RPM Front A-Arm Set (Multiple Colors)PART #: RPM80242Fits: Traxxas Slash 2WD, Nitro Slash, Electric Rustler & Stampede 2WD Upgrade your front suspension with RPM’s legendary Front A-Arms, engineered for durability, reduced weight, and better performance across any terrain. Designed as a direct replacement for stock arms, these A-arms are nearly 25% lighter, yet significantly stronger and more flexible under impact. They’re molded from RPM’s exclusive nylon blend and backed by RPM’s unbeatable breakage warranty. Key Features: Stronger than stock: Resists flex and breakage even under heavy abuse Lightweight design: Up to 25% lighter than factory arms Improved ground clearance: Angled edges help your car glide over obstacles Increased droop travel: Compatible with RPM oversized bearing carriers (RPM80372 & RPM80382) Enhanced handling: Maintains rigidity for consistent suspension geometry Colors Available: Black Blue Green Red Includes:(2) Front A-Arms Compatibility: Traxxas Slash 2WD Traxxas Nitro Slash Traxxas Electric Rustler Traxxas Electric Stampede 2WD

Read more less

The RPM Front Bumper & Skid Plate for the Traxxas Slash 4x4 features a rugged three-piece design that delivers maximum protection for bashers while giving racers the flexibility to reduce weight when needed. Built with RPM’s impact-absorbing materials, this system provides serious front-end durability without sacrificing performance or style. The modular design allows you to run full bumper and skid protection for maximum crash resistance, or remove the bumper and run only the skid plate mount and skid plate for a lightweight racing setup—shedding approximately 27 grams from the front of the truck. Key Features Three-piece modular bumper and skid plate design Full bash protection or lightweight race configuration Impact-absorbing RPM construction Eliminates stock bumper support ring and hardware Reduces transfer of impact energy to differential housing Thicker skid design for improved durability Includes longer mounting screws for increased strength Benefits Helps absorb frontal impacts and reduce chassis damage Reduces stress transferred into the differential housing Easy conversion between bashing and racing setups Strong, durable, and lightweight design Compatibility Traxxas Slash 4x4 A durable, race-ready front-end upgrade that delivers RPM toughness with the flexibility to match your driving style. 🏁

Read more less

Upgrade your suspension with RPM’s high-performance A-arms for the Traxxas Slash and Stampede 4x4! These arms are a game-changer — lighter, stronger, and far more precise than stock. Features: Eliminates slop in the suspension system Tightens tolerances around hinge pins by over 90% Reduces unwanted fore/aft movement for better stability Drops 6.5g per A-arm — nearly 1 oz weight savings per truck! Reinforced bosses for shock and sway bar mounting Iconic RPM styling with 30° leading/trailing edges Molded from RPM’s legendary ultra-durable nylon Available in Black, Red, Green, or Blue Note: Each package includes 1 left and 1 right A-arm Two packages are required to complete one full truck (front and rear) Rear A-arms do not support the upper hinge pin hole of aftermarket axle carriers Proudly made in the USA.

Read more less

Skid Plate Overview:The RPM Front Skid Plate adds critical front-end protection to your Team Associated Rival MT10 or Pro4 SC10. Designed to shield vulnerable steering components, it helps reduce damage from impacts while maintaining steering performance. 🏁 About the Front Skid Plate 💪 Heavy-Duty Protection Molded from RPM’s proprietary engineering-grade nylon, this skid plate is built to absorb impacts and protect key components like the servo and bellcrank during hard driving. 🔧 Reinforced Design Reinforced support structures help reduce flex under heavy hits, keeping your steering more consistent even after rough landings and collisions. ⚙️ Flexible Setup The removable servo/bellcrank cover allows you to run lightweight for racing or install it for added protection during bashing. 🔧 Key Features ✔ Durable nylon construction for impact resistance✔ Protects servo and bellcrank components✔ Reinforced design reduces flex✔ Removable cover for versatility✔ Made in the USA✔ Backed by RPM limited lifetime warranty 📦 Includes (1) Front Skid Plate 🚗 Compatibility Team Associated Rival MT10 Team Associated Pro4 SC10 Built for drivers who push their trucks hard, this RPM skid plate delivers reliable protection and durability where it matters most.  

Read more less

Serious truck. Serious protection. The RPM Front Upper Bumper Mount is engineered to handle the brutal impacts that come with running the Traxxas X-Maxx hard. Designed as a heavy-duty upgrade over the stock small beam supports, this mount replaces them with oversized rectangular beams for dramatically increased strength and durability. Built with RPM’s signature impact-resistant design, the curved beam structure adds controlled flexibility to help absorb and dissipate energy from hard landings, nose-down crashes, and full-send bashing sessions. Instead of transferring impact directly into the chassis, this mount helps spread the load and reduce damage potential. If you’re pushing your X-Maxx to its limits, this is a smart durability upgrade that adds confidence every time you pull the trigger. Features: Replaces small beam supports with oversized rectangular beams Curved beam design improves impact absorption Flexible construction helps dissipate crash energy Ultra-strong build for extreme bashing Direct replacement upgrade Includes: (1) Front Upper Bumper Mount Built for bashers who don’t back off the throttle.

Read more less

When strength matters, RPM delivers. These Heavy Duty Front A-Arms are a direct replacement for the stock arms on your Losi Mini-T 2.0 or Mini-B, but with a serious upgrade in durability. Built from RPM’s legendary engineering-grade nylon, they’re 25% thicker in the hinge pin boss and feature beefed-up support beams to protect your shock pivots from damage. 💪 Features: Front inner hinge pin boss is ~25% thicker than stock Overall arm thickness increased by ~25% Support beams are up to 50% thicker for better impact resistance Designed to take the hit before your shock pivot does Made from RPM’s ultra-durable nylon blend 📦 Includes:(1) Set of Heavy Duty Front A-Arms – Black ✅ Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

RPM Hybrid Gearbox Housing & Rear Mounts (Black)PART #: RPM73612 Upgrade your Traxxas 2WD vehicle with the RPM Hybrid Gearbox Housing and Rear Mounts — engineered for unmatched strength, heat dissipation, and long-term durability. This hybrid setup combines a CNC-machined aluminum motor plate with RPM’s signature ultra-tough molded nylon housing and rear mounts, delivering a rugged solution for racers and bashers alike. Fits: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Bandit Traxxas Stampede 2WD Key Features:Aluminum Motor Plate: 3mm thick 6061 T6 aluminum plate Locks in gear mesh for consistent settings Helps dissipate motor heat Not integrated into bumper mounts — no flex on rear impacts Molded Gearbox Housing: Made from RPM’s bulletproof nylon blend Fully enclosed design keeps debris out Compatible with stock motor cover Eliminates bottom hole from stock housing for cleaner internals Quieter operation than stock Rear Mounts (0° and 3° Included): Two sets of rear mounts included: 0° and 3° toe-in Easily serviceable—no need to remove the entire transmission Molded for tight tolerances with minimal suspension slop What’s Included: Hybrid gearbox housing 0° and 3° rear A-arm mounts 3mm aluminum motor plate Mounting hardware and instructions Tech Notes: Internal transmission components (gears, bearings, shafts) not included — transfer these from your stock setup. Replaces Traxxas #3691 and #3691A. Minor trimming of stock A-arms may be needed; no issues with RPM rear arms.

Read more less

RPM No-Clip Body Mounts – Slash 2WDPART #: RPM70860 Tired of losing body clips or ruining the scale look of your Slash 2WD with oversized body posts? RPM has the perfect solution: the RPM No-Clip Body Mount System, designed specifically for the Traxxas Slash 2WD. This innovative setup eliminates through-the-body posts entirely and replaces them with a scale mock radiator and concealed locking mechanism. It doesn’t just work well—it looks awesome too. The detailed radiator and faux fan shrouds lock your body into place without sacrificing aesthetics. Key Features: Completely eliminates body clips for a clean, scale look Innovative lock system: hidden rear latch + under-body front frame Ultra-scale realism with molded radiator and fan setup Adjustable height: drop body up to 3/16” or raise it 3/8” from stock Durable: Made in the USA from RPM’s bulletproof engineering-grade nylon Easy to install: Comes complete with everything you need Compatibility Notes: Fits most stock Traxxas Slash 2WD bodies NOT compatible with Ford Raptor, Rob MacCachren Dodge, Dakar, or Nitro Slash bodies NOT compatible with Traxxas On-Board Audio (OBA) system Includes: (1) Front Under-Body Mount Assembly (1) Rear Radiator Lock Assembly Mounting Hardware & Instructions Give your Slash the ultimate scale upgrade with RPM's No-Clip Body Mount System. Form meets function—no clips required.  

Read more less

  RPM Rear A-Arm Set (Multiple Colors)PART #: RPM80592–80599Fits: Traxxas Slash 2WD Take your Traxxas Slash 2WD to the next level with these ultra-durable RPM Rear A-Arms, designed to withstand the most punishing bashing sessions. Made from RPM’s exclusive ultra-tough nylon blend, these A-arms provide superior impact resistance, reduced flex, and precise suspension geometry — all while being lighter than stock components. Pair them with RPM Front A-Arms (RPM80244) for a consistent performance upgrade and clean, uniform look. Available in a variety of colors including black, blue, green, red, and more to match your style. Key Features: Unmatched durability from RPM's legendary nylon blend Crash-resistant design made to absorb the worst landings Lighter than stock for better suspension response Perfect color match with RPM front A-arms for a complete custom look Backed by RPM’s limited lifetime warranty Colors Available: Black Blue Green Red Others (based on inventory) Includes:(2) Rear A-Arms Compatibility: Traxxas Slash 2WD

Read more less

RPM Rear Bumper for Traxxas Slash 2WD – Built to Take a Hit Built for Bashers. Ready for Impact.The RPM Rear Bumper for Traxxas Slash 2WD isn’t just tough — it’s molded from RPM’s legendary blend of ultra-durable plastic for rear-end protection you can trust. ✅ 18% lighter than stock – because lighter = faster✅ Scale short course look – wide, flat, and aggressive✅ Mud flap ready – pre-drilled for RPM’s #81012 flaps✅ Includes hardware & instructions – install and go This bumper stops rear impacts in their tracks and looks like it belongs on a real Baja truck. Available in multiple color options to match your build. 💥 Protect your Slash. Stay race-ready.  

Read more less

  Upgrade your X-Maxx with the strongest rear axle carriers on the market. RPM’s Oversized Rear Axle Carriers solve the two biggest problems X-Maxx owners face: broken carriers and blown inner bearings. RPM engineered these to take extreme abuse, adding massive support ribs and beefed-up geometry for unmatched durability. The real game-changer?Huge oversized inner bearings.RPM replaces the tiny stock 20×27×4mm bearings with massive 20×32×7mm bearings—over 300% stronger in static and dynamic load ratings. That means smoother running, longer bearing life, and way less maintenance. If you bash your X-Maxx hard, these are a must-have upgrade. Features Extreme-duty RPM nylon construction for unmatched durability Oversized 20×32×7mm inner bearings (included) Nearly 300% stronger load rating vs. stock bearings Beefy support rib design to prevent carrier failure Direct fit upgrade for Traxxas 7752 carriers Backed by RPM’s renowned limited lifetime warranty Includes (1) Left Oversized Rear Axle Carrier (1) Right Oversized Rear Axle Carrier (2) Oversized inner bearings (20×32×7mm) Note: Outer bearings are not included (use Traxxas 5106 / 5106A).  

Read more less