Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier (Requires TRA7783X) Upgrade your drivetrain durability with the Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier. Precision-machined from aluminum, this housing offers increased strength and improved heat dissipation for high-performance 8S setups. It's designed specifically for models equipped with the Torque-Biasing Center Drive and reinforced front/rear differentials. 🔧 NOTE: Requires TRA7783X Spider Gear Shaft & Spacer Set for proper installation. ✅ Features: 🏗️ CNC-machined aluminum for enhanced durability and precision ⚙️ Ideal for high-stress, high-speed 8S bashing and racing 🧊 Improved heat dissipation over stock composite housings 🔩 Designed for use with front/rear diffs and Torque-Biasing Center Drive systems 📦 Includes: (1) Aluminum Differential Housing Carrier 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🏁 Stronger. Cooler. Race-Ready. Upgrade your differential housing to aluminum today.

Read more less

  Traxxas X-Maxx/XRT Differential Gear Set (Front or Rear) Keep your drivetrain running strong with the Traxxas X-Maxx/XRT Differential Gear Set. This OEM replacement includes all the internal gears needed to rebuild one complete front or rear differential. Designed for high-torque 8S performance, it's a must-have for racers and bashers who push their trucks to the limit. 💡 Tip: When rebuilding, refill with diff fluid. Traxxas recommends 10,000W in the front and 30,000W in the rear. 📦 Includes: (2) Output Gears (4) Spider Gears (2) Thin Diff Washers(Enough to rebuild one diff — front or rear) ✅ Compatibility: Traxxas X-Maxx (#77086-4) Traxxas XRT 🛠️ Rebuild. Refresh. Race again. Stock up and stay ready for anything the track throws your way!

Read more less

Traxxas X-Maxx/XRT Differential Housing Carrier This is a replacement Traxxas X-Maxx/XRT Differential Housing Carrier, complete with included gaskets and washers for a proper seal and smooth installation. Built tough to handle the intense power and punishment of 8S brushless systems, this part keeps your front or rear differential securely housed and operating at peak performance. ✅ Features: 🔩 OEM replacement for X-Maxx and XRT platforms 🧱 Reinforced composite housing for durability under extreme loads ⚙️ Includes gaskets and washers for proper sealing and fitment 🔧 Essential for differential maintenance or rebuilds 📦 Includes: (1) Differential Housing Carrier (1) Gasket Set (1) Washer Set 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🔧 Engineered to endure. Built to fit. Backed by Traxxas.

Read more less

Built for brutal 8S power, the Traxxas 11T Heavy Duty Rear Pinion Gear is a direct replacement for the X-Maxx and XRT. Designed to pair with the 35T Heavy Duty Ring Gear (#7792), this gear delivers the strength and durability needed to keep you bashing harder and longer. Features:• Heavy-duty 11-tooth rear differential pinion gear• Designed for use with 35T ring gear (#7792)• Reinforced for extreme 8S power• Perfect fit for high-stress drivetrain setups Compatibility:• Traxxas X-Maxx• Traxxas XRT Includes:• (1) 11T Rear Pinion GearPart Number: 7791 Upgrade your rear diff and stay in the fight with genuine Traxxas strength.  

Read more less

Traxxas X-Maxx/XRT Metal Transmission Output Gear (51T)(Requires TRA7785X Steel Input Gear) Upgrade your drivetrain with the Traxxas 51T Steel Transmission Output Gear for the X-Maxx and XRT! Built from durable metal, this high-strength gear is designed for heavy-duty performance and extreme torque applications. Ideal for high-powered 8S setups, it delivers superior durability and wear resistance over the stock gear. 🔧 Important: This gear must be used with the TRA7785X Steel Input Gear for proper operation. 📦 Includes: (1) 51T Steel Transmission Output Gear ✅ Compatibility: Traxxas X-Maxx Traxxas XRT 🛠️ Toughen up your transmission and stay in the game — even under the harshest conditions!

Read more less

Traxxas XRT Belted Gravix Pre-Mounted Tires (Chrome) – 24mm Hex (2pcs) High-Speed Grip for X-Maxx & XRT Platforms Upgrade your Traxxas X-Maxx or XRT with these Belted Gravix® Pre-Mounted Tires. Engineered for precision handling and extreme speed, these belted tires maintain their shape under stress and offer excellent grip on a variety of surfaces. Pre-glued to chrome XRT wheels with a 24mm hex, they’re ready to drop in and dominate. ⚙️ Features: 🏁 Belted Construction – Lightweight internal belting helps reduce ballooning at high speeds 🧭 Directional Tread – Increases traction and control 🛠️ Pre-Mounted – Glued to durable chrome XRT wheels with 24mm hex hubs 🧼 8S-Rated Glue Beads – Ultra-tough bonding for serious abuse 🔧 Low-Profile Design – Enhances stability, steering, and handling performance 📦 Includes: (1) Left Belted Gravix Tire (Chrome Wheel, Pre-Mounted) (1) Right Belted Gravix Tire (Chrome Wheel, Pre-Mounted) 🔗 Compatibility: Traxxas XRT (Standard & Ultimate) Traxxas X-Maxx (Standard & Ultimate) Get ready to push the limits with confidence—perfect for high-speed street sessions and aggressive off-road runs!

Read more less

Traxxas XRT Rear Lower BulkheadOEM Replacement for Your XRT Beast Bulkhead Overview:Keep your XRT running strong with the Traxxas Rear Lower Bulkhead—a genuine replacement part designed for a perfect fit and lasting durability. Whether you're repairing after a hard hit or doing preventative maintenance, this is the exact part you need to get back on the throttle. Features: Factory replacement part for easy installation Durable composite construction Designed specifically for the Traxxas XRT platform Includes: (1) Rear Lower Bulkhead Compatibility:  • Traxxas XRT

Read more less

  Overview:The Traxxas XX-Long Hard Chrome Shock Shafts are designed for durability and smooth suspension performance. Precision-ground and hard chrome-plated, these shafts provide resistance against wear and bending while ensuring ultra-smooth shock action, even under extreme RC driving conditions. Features: Set of 2 XX-Long shock shafts Hard chrome finish for maximum durability and smooth operation Precision-ground for exact fit and long life Direct factory replacement for Traxxas big-bore and Ultra shocks Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas models such as: Stampede Rustler Bandit Slash (depending on configuration) Always check your manual for exact fitment Includes: (2) XX-Long Hard Chrome Shock Shafts Part Number: 2656

Read more less

  Overview:The Traxxas XX-Long Hardened Steel Shock Shafts deliver maximum strength and durability for extreme RC action. Constructed from premium hardened steel, these shafts resist bending and wear far better than stock, ensuring consistent performance and smooth suspension movement—even under the harshest bashing or racing conditions. Features: Set of 2 XX-Long shock shafts Made from hardened steel for extreme strength Precision-ground for smooth shock action and long life Tougher and more durable than chrome-plated shafts Genuine Traxxas factory replacement part Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas vehicles, including: Stampede Rustler Bandit Slash (models using XX-Long shocks) Check your model’s manual for exact fitment Includes: (2) XX-Long Hardened Steel Shock Shafts Part Number: 2656T

Read more less

Treal Hobby Type I 1.9" Vintage 12-Hole Beadlock Wheels (Titanium) (4) – TLHTWHEEL-100 Bring a classic scale look to your 1/10 crawler with the Treal Hobby Type I 1.9" Vintage 12-Hole Beadlock Wheels. Crafted from premium CNC-machined aluminum and outfitted with interchangeable steel center rings, these wheels not only look vintage but deliver modern performance and strength. Each wheel adds substantial unsprung weight—132g per wheel—to lower your rig’s center of gravity, improving crawling stability and grip over technical terrain. The removable 12mm hex hubs give you the flexibility to adjust offset for custom fitment and driving preferences. This Titanium finish offers a sleek, timeless appearance perfect for scale builds. Features: Scale vintage 12-hole beadlock design CNC-machined aluminum construction with steel heavy center rings Beadlock system—no glue required Standard 12mm hex hubs (removable for offset adjustment) Compatible with most 1/10 scale rock crawlers and trail trucks Available in multiple color finishes Adds a total of 528g unsprung weight for improved crawling performance Specifications: Wheel Size: 1.9" Inner Wheel Diameter: 45.2mm (1.779") Width: 27mm (1.063") Offset: 2.0mm (0.078") Hex Hub: 12x9mm Weight: ~132g per wheel (fully assembled) Material: Aluminum (wheel), Steel (center ring) Includes: (4) Type I 1.9" Vintage 12-Hole Beadlock Wheels (Titanium) (4) Steel center rings (4) 12mm hex hubs Give your crawler the perfect mix of vintage style and modern strength with Treal Type I wheels.

Read more less

Treal Hobby Type K 1.0" 12-Hole Beadlock Classic Vintage Wagon Wheels (Black, Bronze, Grey, Silver) (4) – 28.9g Each Give your micro crawler that scale vintage flair with Treal Hobby's Type K 1.0" Classic Wagon Wheels. These beadlock rims are CNC machined from aluminum and feature interchangeable brass center rings for added weight and realism. Each set adds a total of 115.6g of unsprung weight down low—improving traction, crawling stability, and overall performance. Offered in four sleek finishes—Black, Bronze, Grey, and Silver—these wheels let you customize your rig’s style while maintaining premium durability and functionality. Features: Classic 12-hole vintage design Beadlock for easy mounting—no glue needed CNC-machined aluminum construction Brass center ring for added weight and balance Removable hex hub for offset tuning and customization Available in Black, Bronze, Grey, and Silver Adds 115.6g total weight (28.9g per wheel) Specifications: Application: 1/24 & 1/18 Micro Crawlers Outer Diameter: 1.22in (31mm) Wheel Diameter: 1.0in (25.4mm) Width: 0.5in (12.7mm) Hex Hub: 7mm (0.275in) Weight (each): 28.9g assembled Includes: (4) Type K 1.0" Beadlock Wheels in your choice of finish Brass center rings Removable hex hubs Upgrade your mini crawler’s looks and performance with the scale detail and rock-solid grip of Treal Hobby's Type K wheels.

Read more less

Treal Hobby Type V 1.9" V-Spoke Beadlock Wheels (Black) (4) – TLHTWHEEL-167 Upgrade your 1/10 crawler with the Treal Hobby Type V 1.9" V-Spoke Beadlock Wheels. Machined from premium CNC aluminum with heavy-duty iron center rings, these wheels combine aggressive styling, added weight down low, and rugged durability for superior crawling performance. The bold V-spoke design adds serious scale realism, while the beadlock system ensures a secure tire fit without glue. The removable 12mm hex hub lets you fine-tune your offset or swap out for a different hub style. With 490g of total unsprung weight added, you'll enjoy better traction and stability over technical terrain. Features: CNC-machined aluminum construction V-Spoke design for scale realism 1.9” standard wheel size Removable 12mm hex hub for adjustable offset Interchangeable iron center rings for added weight Pre-assembled for quick installation Compatible with most 1/10 scale crawlers Adds 122.5g per wheel of low-mounted weight for better crawling Specs: Inner Wheel Diameter: 1.77" (45mm) Outer Diameter: 1.9" (48.26mm) Width: 1.1" (27.9mm) Hex Size: 12mm Offset: -4mm Weight: 122.5g per wheel Includes: (4) Pre-Assembled Type V 1.9" V-Spoke Beadlock Wheels (Black)  

Read more less

Treal Hobby Type V2 1.9" 10-Spoke Beadlock Wheels (Black/Silver) (4) – TLHTWHEELS-04 Elevate the look and performance of your 1/10 scale crawler with the Treal Hobby Type V2 1.9" Beadlock Wheels. Featuring a bold 10-spoke design and crafted from precision CNC-machined aluminum, these wheels are built to perform on the trail while adding a scale-realistic aesthetic. Each wheel includes a heavy-duty steel center ring to boost unsprung weight—adding a total of 468g across all four wheels—for a lower center of gravity and improved crawling stability. The beadlock design ensures a secure, glue-free tire mount, and the removable 12mm hex hubs allow for offset tuning or custom hub swaps. Features: Sleek 10-spoke scale design 1.9" standard beadlock wheels for 1/10 crawlers CNC-machined aluminum outer with steel center ring Heavyweight design improves low center of gravity Removable 12mm hex hub for adjustable offset Compatible with most 1/10 rock crawlers Black and silver finish for a clean, modern look Specifications: Inner Diameter: 1.8" (48mm) Outer Diameter: 1.9" Width: 1.87" (47mm) Hex Hub Size: 12mm Weight: 117g per wheel (fully assembled) Total Weight Added: 468g Includes: (4) Type V2 1.9" 10-Spoke Beadlock Wheels (Black/Silver)  

Read more less

UpGrade RC "Black Lightning" Rubber Sealed Bearing Kit for Traxxas® TRX-4M™📦 Part #: UPG-17014💥 Boost performance. Seal out the grime. Upgrade your TRX-4M with the UpGrade RC “Black Lightning” Bearing Kit—built to handle the roughest terrain and keep your rig rolling smoothly. Featuring rubber-sealed bearings, this kit offers enhanced protection from dirt, dust, and moisture, meaning less maintenance, more drive time, and longer-lasting performance. 🛠️ Key Features: ✅ Rubber Seals: Keep out water, grime, and contaminants ✅ Smooth & Quiet Operation: Reduced friction for better performance ✅ High Durability: Less wear = longer life ✅ Corrosion Resistant: Run hard in any environment ✅ Precision Fit: Designed specifically for TRX-4M platforms 🔧 Includes (22 Bearings Total): (2) 8x12x3.5mm (4) 5x8x2.5mm (4) 4x8x3mm (4) 3.5x7x2.5mm (8) 3x6x2.5mm 💡 Note: Always verify your model’s bearing sizes in your manual, especially if you’ve installed hop-ups or own a different production version. 🚀 Built for performance. Sealed for protection.The Black Lightning series delivers the smooth power transfer and reliability you need—on the rocks or off the grid.  

Read more less

Chassis Protector Overview: The UpGrade R/C Chassis Protective Sheet is crafted from a durable 12 mil laminate with a strong adhesive vinyl backing, precisely cut to fit the model's dimensions for a professional appearance while safeguarding your chassis. Ideal for both new and used chassis, these sheets prevent scratches and scrapes, thereby extending the chassis' lifespan. For optimal performance, replace the sheet when noticeable wear occurs. Additionally, the sheets create a smooth surface on the chassis, reducing friction with the ground, which helps the vehicle slide more easily and maintain momentum during hard landings.   Features: Fits Arrma® Typhon™ Grom Made from genuine 3M® material Thick long-lasting laminate Protects against scratches and wear Keeps chassis looking new Precut professional fit Made in the USA Includes: (1) Chassis Protector

Read more less

🛡️ Protect. Customize. Perform. Keep your Losi Micro-B looking factory-fresh and running smooth with the UpGrade RC Chassis Protector. Precision-cut for a perfect fit and crafted from genuine 3M® material, these high-strength laminated sheets offer serious protection against scrapes, scratches, and bottom-out wear—while adding a clean, professional look. ✅ Fits Losi Micro-B chassis perfectly✅ Made from durable 3M® vinyl + long-lasting laminate✅ Reduces friction + protects from damage✅ Easy to apply, peel-and-stick design✅ Available in multiple styles for your custom look✅ Made in the USA 📦 Includes:• (2) Chassis Protectors (same style) 🎨 Choose your favorite design and race with confidence— your chassis deserves it.

Read more less

Fine-tune your XB2’s handling with the XRAY 2024 Front Anti-Roll Bars. These sway bars allow you to balance steering response and cornering stability to match track conditions. Overview:Adjusting the front anti-roll bar directly affects steering response and front-end stability: Softer bar (thinner mm): Increases front grip and stability in low-traction conditions Stiffer bar (thicker mm): Reduces body roll for precise cornering but may decrease front-end grip Available Sizes: 0.8mm (Softest) – XRA322489 1.0mm – XRA322490 1.1mm – XRA322491 1.2mm – XRA322492 1.3mm (Hardest) – XRA322493 Effects of Roll Bar Changes: Softer bar: More chassis roll, more cornering grip, slower response Stiffer bar: Less chassis roll, quicker steering response, less cornering grip Compatibility: XRAY XB2 (2024 and later) Includes: (1) Anti-Roll Bar in chosen thickness    

Read more less

Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less

The XRAY 9° Graphite Composite C-Hub is a high-performance upgrade that improves steering precision and durability on your XB4 buggy. Molded from a tough graphite-infused composite, this hub reduces flex and delivers consistent handling — ideal for high-traction tracks like carpet and turf. About the C-HubWith a built-in 9° caster angle, this hub sharpens steering response while keeping the buggy stable in high-speed corners. The lightweight, reinforced design ensures dependable performance through intense racing conditions. Features: Graphite composite construction for maximum stiffness and durability 9° caster angle for improved steering precision Lightweight design with factory fit and finish Direct replacement part for stock hubs Includes:(1) Graphite 9° Composite C-Hub (choose right or left side) Compatibility: XRAY XB4 1/10 4WD Buggy (all versions – confirm fit in manual)

Read more less

Upgrade your ride with these precision-engineered 55mm Adjustable Turnbuckles, crafted from world-renowned HUDY Spring Steel™ for unmatched strength and durability. Featuring M3 left- and right-hand threads, they allow for easy and precise suspension and steering adjustments without removing them from the car. Features: Premium HUDY Spring Steel™ for maximum lifespan and toughness 55mm length – ideal fit for multiple XB2/XT2 suspension applications M3 left & right threads for fast, fine adjustments Black coating for wear resistance and a pro finish Includes two turnbuckles Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 55mm M3 turnbuckles Includes: (2) 55mm Adjustable Turnbuckles

Read more less

Fine-tune your XB2/XB4’s front suspension geometry with the precision-machined XRAY Aluminum Front Lower Arm Mount. Crafted from premium Swiss 7075 T6 aluminum, this mount allows for +3° or -3° arm sweep adjustment, giving racers the flexibility to dial in steering response and overall handling balance. Features: CNC-machined from high-grade Swiss 7075 T6 aluminum for maximum strength and durability Provides +3° or -3° adjustment to fine-tune suspension setup Anodized finish for wear resistance and factory look Precision design ensures a perfect fit with XRAY chassis components Improves handling versatility on varying track conditions Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for exact fit) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for exact fit) May also fit XB4 platforms depending on configuration (verify with manual) Part Number: 322317

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Front Lower Arm Mount (0°). Precision-machined from Swiss 7075 T6 aluminum and finished in sleek black coating, this mount provides rock-solid suspension geometry and long-lasting durability for competitive racing. Features: CNC-machined from premium Swiss 7075 T6 aluminum 0° geometry for precise suspension setup Increases consistency and stability in all conditions Black coated for a factory-team look and added wear protection Direct fit replacement part Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (1) Aluminum Front Lower Arm Mount 0°  

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

The XRAY LCG Narrow Gear Differential Assembly Set is a complete, factory-precision unit designed for the XB2, XB4, and XT2 platforms. This low center of gravity (LCG) design lowers weight placement, improving corner speed, stability, and overall handling balance. Built with XRAY’s renowned attention to detail, this differential offers smoother power delivery and enhanced consistency during long runs. Features: Complete pre-assembled gear differential for quick installation LCG design improves cornering stability and reduces chassis roll Precision-molded composite and hardened steel components for durability Optimized sealing system for reduced leakage and longer maintenance intervals Direct factory replacement for XRAY XB2, XB4, and XT2 vehicles Includes:(1) XRAY LCG Narrow Gear Differential Assembly (fully built)  

Read more less

Give your buggy extra front-end stability and sharper cornering response with the XRAY Wide Lexan Front Wing. Designed for high-downforce performance, this wing increases steering in both low and high-speed sections, keeping your car planted and predictable on the track. Features: Molded from lightweight, durable premium Lexan® Wide design for maximum front-end downforce Improves steering response and cornering grip Clear, ready for custom paint or decals Compatibility: XRAY XB2 / XT2 (and other 1/10 buggies that accept 1/10 front wings) Includes: (1) Wide Lexan Front Wing  

Read more less

Upgrade your drivetrain for maximum efficiency with the XRAY Slipper Eliminator LCG Ultra-Lightweight Set. Designed for serious racers, this setup completely eliminates the traditional slipper clutch, reducing rotating mass and delivering a more direct throttle response. Perfect for high-traction conditions where a slipper is not required. Features: Ultra-lightweight design reduces rotating mass for quicker acceleration LCG (Low Center of Gravity) construction enhances balance and stability Provides more consistent power transfer and improved efficiency Precision-machined for a perfect fit with XRAY driveline components Complete set includes everything needed for installation Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for specifics) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for specifics) Part Number: 324103  

Read more less

The XRAY Universal Drive Shaft is crafted from HUDY Spring Steel™ to deliver unbeatable strength, precision, and durability. Engineered for extreme racing conditions, this driveshaft ensures smoother power delivery, reduced wear, and improved handling consistency. Features: Made from HUDY Spring Steel™ for maximum strength and long life Precision-manufactured for perfect balance and smooth operation Helps reduce drivetrain binding and increase efficiency Ideal as a high-performance upgrade or replacement part Compatibility: XRAY XT8 – 1/8 Nitro Truggy (front & rear, check manual for placement) XRAY GTXE / GTX8 – 1/8 GT platforms (verify with kit manual) Part Number: 355222

Read more less

XRAY XB4C & XB4D 2025 1/10 Electric 4WD Competition Buggy Kits – Race-Ready Precision for Every Track! Unleash your championship potential with the XRAY XB4 2025, the ultimate 1/10 electric 4WD competition buggy, available in two track-specific editions: 🔹 XB4C (Carpet Edition) – Optimized for high-traction carpet tracks, featuring a multi-adjustable slipper one-way clutch, aluminum bulkhead, and rigid carbon chassis for maximum stability and speed.🔹 XB4D (Dirt Edition) – Designed for low-traction dirt tracks, equipped with a central gear differential, composite bulkhead, and flexible chassis components to deliver consistent traction and adaptability. Both editions are engineered with cutting-edge suspension, an optimized drivetrain, and race-tuned handling, giving racers the edge they need to dominate any track. Key Features: 🏁 XB4C – Carpet Edition: ✅ Multi-Adjustable Slipper One-Way Clutch – Maximizes acceleration and control on high-traction surfaces.✅ Aluminum Central Bulkhead – Enhances drivetrain efficiency and durability for high-speed racing.✅ Graphite Suspension Arms & Aluminum Steering Plates – Ensures precise response and stability.✅ Carbon Chassis T-Brace & Slipper Carbon Center Upper Deck – Provides rigidity for high-speed precision.✅ Lightweight Gamma 4C Body – Designed for aerodynamic efficiency and high-speed stability. 🌿 XB4D – Dirt Edition: ✅ Central Gear Differential – Increases traction and consistency on loose, low-traction surfaces.✅ Composite Central Bulkhead – Improves flex characteristics for optimized grip.✅ Hard Suspension Arms & Graphite Steering Plate – Provides durability and flexibility for rough tracks.✅ Carbon Chassis Brace & Differential Carbon Center Upper Deck – Enhances flex for better traction.✅ Gamma 4D Body – Tailored for maximum rear-end traction on tight, technical layouts. Advanced Engineering for Ultimate Performance ⚙️ Chassis & Flexibility: XB4C: Rigid carbon chassis and aluminum bulkhead create a stable, high-speed platform for carpet racing. XB4D: Flexible carbon chassis and composite bulkhead improve grip and maneuverability on dirt tracks. 🔩 Suspension for Superior Handling: XB4C: Graphite suspension arms and lower shock adapters enhance responsiveness on high-traction surfaces. XB4D: Hard suspension arms and graphite steering plates ensure durability and adaptability on rough terrain. Both editions feature a redesigned anti-roll bar system for easy tuning from the top and wider suspension holders for enhanced stability. 🛠 Track-Specific Drivetrain Configurations: XB4C: Front central dogbone drive shaft + 117mm rear central dogbone for long-wheelbase stability on high-speed tracks. XB4D: Shorter 113mm rear central dogbone for increased maneuverability on loose tracks. Both models feature steel differential gears for maximum reliability and optimized power transfer. In the Box: XB4C 2025 (Carpet Edition) OR XB4D 2025 (Dirt Edition) – 1/10 Electric 4WD Competition Buggy Kit Lightweight Gamma 4C (Carpet) OR Gamma 4D (Dirt) Body & Wing Wheels Manual Needed to Complete: Electronic Speed Control (ESC) 1/10 Scale Electric Motor Steering Servo 2-Channel Transmitter & Receiver System 7.4V-7.6V 2S "Shorty" LiPo Battery Compatible Battery Charger 1/10 Scale Off-Road Tires Lexan-Spray Paint for Body Assembly Tools Specifications: Scale: 1/10 Drive: 4WD Power Source: 2S LiPo Assembly Level: Kit 🚨 Note: This is an unassembled RC kit requiring assembly, electronics, and other racer-provided components. Photos of the assembled kit are for illustrative purposes only. Choose Your Track – Choose Your Champion! 🏆 Whether you're chasing lightning-fast laps on carpet or dominating unpredictable dirt tracks, the XRAY XB4 2025 offers a race-tuned solution for every surface. Pick your edition and own the track! 🔥 Get the XRAY XB4C 2025 (Carpet) or XB4D 2025 (Dirt) today! 🏁💨

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less