The Reefs RC Beast 1000 is a no-compromise 1/5-scale high-voltage brushless servo built for extreme torque, speed, and durability. Delivering up to 1080 oz-in of torque at 8.4V with lightning-fast response, the Beast 1000 is designed for large-scale bashers, racers, and crawlers that demand maximum steering authority. Featuring a brushless motor, steel gear drivetrain, CNC aluminum case, and a 7-point waterproof sealing system, this servo is ready to perform in the harshest environments with precision and reliability. BEC not required, but recommended for maximum performance. Key Features High-torque, high-speed brushless servo Up to 1080 oz-in torque @ 8.4V Magnetic angle sensor for precise positioning Fully waterproof (7-point seal system) Pulse width modulation (PWM) control Steel gears with CNC aluminum casing Dual servo horn options included Designed for extreme 1/5-scale applications Specifications Voltage: 4.8V – 8.4V Torque: 800 oz-in @ 6.0V 900 oz-in @ 7.4V 1080 oz-in @ 8.4V Speed: 0.11 sec/60° @ 6.0V 0.095 sec/60° @ 7.4V 0.08 sec/60° @ 8.4V Motor: Brushless Gear Material: Steel Case: CNC Aluminum Bearings: 5 Ball Bearings Spline: 15T Dead Band Width: 2 μSec Mechanical Angle: No limit Wire Gauge: 22AWG Weight: 10 oz (285g) Dimensions (L×W×H): 2.59 × 1.18 × 2.32 in Includes (1) Reefs RC Beast 1000 Servo (1) Single servo horn (1) Double servo horn Mounting hardware Part Number: SEHREEFS102 Built for drivers who demand extreme torque, fast response, and rock-solid reliability, the Beast 1000 lives up to its name.  

Read more less

⚙️🏁 Pro-Level Strength for Your Micro RC Build The Reefs RC Pro Shorty Micro Horn is a precision-machined aluminum servo horn designed to deliver exceptional durability and steering performance in micro-scale applications. Built specifically for micro servos utilizing a 25T spline, this Pro Shorty version offers a slightly longer profile and two mounting positions for fine-tuning steering response. Whether you're racing your Grom or tackling technical terrain, this compact upgrade provides the strength and precision needed to keep your steering performing at its best. 🏁 About the Pro Shorty Micro Horn 💪 CNC-Machined Durability Constructed from high-quality CNC-machined aluminum, the Pro Shorty Micro Horn offers significantly greater strength and rigidity compared to standard plastic servo horns. ⚙️ Tunable Steering Response Two linkage mounting positions allow you to adjust steering throw and response to match your driving style and vehicle setup. 🎯 Precise Control The rigid aluminum construction minimizes flex for more direct steering feel and improved consistency under demanding conditions. 🔧 Features ✔ Precision CNC-machined aluminum construction✔ Durable black anodized finish✔ Designed for 25T micro servo splines✔ Pro Shorty design for enhanced versatility✔ Two linkage mounting positions✔ Provides precise steering response✔ Increased durability over plastic servo horns 📦 Includes (1) Reefs RC Pro Shorty Micro Servo Horn (25T) 📊 Specifications Specification Details Spline 25T Micro Overall Length 21mm Screw Hole Diameter 2mm Spline to Outside Hole 13mm Material CNC Machined Aluminum Color Black 🚗 Compatibility Designed for use with micro servos featuring a 25T spline, including: Reefs RC 99Micro Servo Reefs RC 179Micro Servo Compatible with a variety of micro-scale vehicles, including: Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi 1/12 NASCAR Verify servo spline compatibility before installation. 💡 Perfect For ✔ Grom performance upgrades✔ Losi NASCAR tuning✔ Micro crawlers and trail trucks✔ Replacing worn plastic servo horns✔ Drivers seeking improved steering precision and durability ⚠️ Notes Designed for micro servos with a 25T spline. Verify servo compatibility before installation. Mounting hardware may vary depending on the application. 💡 Pro Tip: The Pro Shorty Horn's slightly longer 21mm design can provide additional steering leverage while still maintaining the quick response and durability demanded by competitive micro RC drivers. ⚙️🏁🔥      

Read more less

Reefs RC Shorty Micro Servo Horn (Black) (25T) (SEHREEFS131) ⚙️🛠️ Compact Strength for Your Micro Servo Setup The Reefs RC Shorty Micro Horn is a durable aluminum upgrade designed specifically for micro servos requiring a 25-tooth spline. Precision CNC machined for strength and accuracy, this compact servo horn provides dependable steering performance while offering multiple linkage mounting positions for tuning flexibility. Ideal for crawlers, trail rigs, and other micro-scale applications, the Shorty Micro Horn delivers the reliability and precision Reefs RC is known for. 🏁 About the Shorty Micro Horn 💪 Built to Last Machined from high-quality aluminum, this servo horn offers significantly improved durability over plastic alternatives, helping withstand the demands of off-road driving and crawling. ⚙️ Adjustable Linkage Positions Featuring three mounting holes, drivers can fine-tune steering response and throw to match their specific setup and driving style. 🎯 Precision Performance The CNC-machined construction provides a secure fit on compatible servos while minimizing flex for improved steering consistency. 🔧 Features ✔ Precision CNC-machined aluminum construction✔ Durable black anodized finish✔ Designed for 25T micro servo splines✔ Shorty-style servo horn design✔ Three linkage mounting positions✔ Provides precise steering response✔ Increased durability over plastic servo horns 📦 Includes (1) Reefs RC Shorty Micro Servo Horn 📊 Specifications Specification Details Spline 25T Micro Overall Length 19mm Screw Hole Diameter 2mm Spline to Outside Hole 13.1mm Material CNC Machined Aluminum Color Black 🚗 Compatibility Designed for use with micro servos featuring a 25T spline, including: Reefs RC 99Micro Servo Reefs RC 179Micro Servo May fit other micro servos utilizing a 25T spline. Verify specifications before installation. 💡 Perfect For ✔ Micro crawlers✔ Trail trucks✔ Steering upgrades✔ Replacing worn plastic servo horns✔ Drivers seeking improved durability and precision ⚠️ Notes Designed for micro servos with a 25T spline. Verify servo spline compatibility before installation. Mounting hardware may vary depending on servo application. 💡 Pro Tip: Aluminum servo horns help eliminate flex commonly found in plastic horns, providing more direct steering feel and improved durability in demanding micro RC applications. ⚙️🛻🏁    

Read more less

Upgrade the steering precision of your micro crawler with the Reefs RC SX30 Aluminum Servo Arm & Ball Stud (SEHREEFS286). Designed specifically for the Reefs RC SEHREEFS285 SX30 servo, this precision-machined aluminum servo arm eliminates the flex commonly found in stock plastic servo horns. The rigid machined aluminum construction improves steering consistency and durability, helping deliver more accurate steering response during demanding trail runs. A 20T spline ensures a precise fit on the SX30 servo, while the included stainless steel pivot ball provides increased strength and long-term reliability. For added convenience, the hardware features preinstalled thread lock, helping keep everything secure during installation and extended use. Features• Machined aluminum servo arm for improved strength• 20T spline designed for the SEHREEFS285 SX30 servo• Eliminates flex found in stock plastic servo horns• Black anodized finish with etched Reefs RC logos• Stainless steel pivot ball for increased durability• 2mm upgraded thread size for improved strength• Preinstalled thread lock for easy installation Includes• (1) Aluminum Servo Arm• (1) Stainless Steel Pivot Ball  

Read more less

The XPT3 LCG Transmission from Reefs RC is a purpose-built, ultra-compact drivetrain upgrade engineered for competitive 1/10 crawlers. Weighing in at just 75 grams, the XPT3 delivers a true low-CG advantage without sacrificing strength or reliability. Designed with a machined aluminum case, hardened steel gears, and titanium output shafts, this transmission is built to take abuse while maintaining smooth, precise power delivery. The forward motor mounting improves balance and packaging, while 48-pitch gearing and an easy-set gear mesh with protective cover keep performance consistent even in harsh trail conditions. Whether you’re running straight axles or portals, the XPT3 offers flexible gearing options to dial in the perfect final drive for your setup—making it a serious upgrade for high-end crawler builds. 🔧 Features Ultra-lightweight design — only 75g Compact low-profile (LCG) transmission layout CNC-machined aluminum case for durability Hardened steel gears for long service life Titanium output shafts for maximum strength Forward motor mounting for improved balance Smooth-running 48-pitch gears Easy gear-mesh setup with debris-blocking cover 📐 Specifications Weight: 75g Pinion Range: 11T–20T (48p) Transmission Ratio: 6.75:1 – 12.27:1 Final Drive Ratios (FDR): Straight Axle: 25.31:1 – 46.02:1 Axial Portal Axle: 48.52:1 – 88.21:1 Vanquish F10 Portal Axle: 35.44:1 – 64.43:1 📦 Includes (1) Reefs RC XPT3 LCG Transmission (Silver) ⚠️ Pinion Recommendation Straight axles: 11T Portal axles: 14T(May vary depending on rig setup and motor choice) ✅ Compatibility Axial SCX10 II Axial SCX10 III Vanquish Products VRD Vanquish Products VS4-10 A premium transmission built for serious crawlers—lightweight, strong, and engineered to win.

Read more less

Unmatched Grip. Proven Performance. Engineered for RCP tracks and fine-tuned through extensive testing across the USA, the Reflex Racing 11mm Radial Tire (30°) delivers elite-level traction, corner stability, and forward bite. Designed from the ground up for competitive Mini-Z racers, this tire provides consistent performance and superior control lap after lap — trusted by both pros and weekend racers alike. Advanced Radial Design Unlike traditional directional tires, the Reflex Racing Radial features a non-directional tread pattern precision-cut directly into the slick — not molded over it. This design reduces tread flex under load, resulting in incredible stability during rotation and enhanced exit traction. Even as the tread wears down, performance remains sharp and consistent for longer track life. Optimized for Corner Speed The 11mm tire is 25.25mm in diameter (when mounted with super glue), optimized for maximum corner speed and smooth rotation. The 30° compound performs across a wide temperature range — from 45°F to 80°F — maintaining reliable grip in changing track conditions. For ultra-high grip environments, simply trim the tire for more rotation in tight corners. Features: Designed specifically for RCP track surfaces Non-directional radial tread for even wear and stable handling Superior cornering stability and exit traction Long-lasting 30° compound performs even after visible tread wear Optimized 25.25mm diameter for faster corner speed Proven performance by racers nationwide Includes: (2) Reflex Racing 11mm Radial Tires – 30°(Wheels not included; shown for reference only) Reflex Racing — Precision. Performance. Proven.

Read more less

Compact, efficient, and competition-ready — the Rocket-RC TS80-PRO 80A Brushless Sensored ESC is designed for 1/10 stock class racing and 1/14 scale competition. With precision engineering and powerful output, it delivers smooth throttle control, reliable braking, and durability for serious racers. ⚡ Features: Compact size perfect for 1/14 & 1/10 scale vehicles Efficient aluminum casing with machined heatsink High-performance cooling fan (23,000 RPM @ 7.2V) Built-in Super BEC for stable power delivery Programmable with optional LED V2 Program Card (KS-300004-00) Pre-installed XT60 battery connector Factory preset: Forward/Brake (can be adjusted to Forward/Brake/Reverse) 🔧 Specifications: Dimensions: 29.5 x 29.5 x 24mm (with fan) Weight: 62g (with wires) Voltage Input: 6V–11V (2S LiPo) Continuous Current: 80A Peak Current: 160A Motor Limit: Over 13.5T (540) / Over 10.5T (380/390) Motor Type: Sensored 380 / 390 / 540 Brushless Motors BEC: 3A / 6V Multi-Protection System: Yes 📦 Includes: (1) Rocket-RC TS80-PRO 80A Brushless Sensored ESC XT60 Battery Connector (installed)

Read more less

This is an optional set of RPM 4S Kraton and Outcast Front Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less

This is an optional set of RPM 4S Kraton and Outcast Rear Suspension Arms, intended for use with ARRMA Kraton and Outcast kits and designed for strength and durability with features to better enhance performance. These A-arms deliver excellent slop elimination by reducing the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings. The addition of a second shock mount hole further out on the arm provides a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst. These arms are almost 25% thicker and able to take much more damage than stock. Features: Nearly 25% thicker than stock a-arms for extreme durability Less slop for improved suspension and steering performance Second shock mount hole for added adjustability Replaces stock #AR330521

Read more less

RPM Extra Wide Front Bumper (Black) – RPM80042 Front-End Armor for Your Associated RideThe RPM Extra Wide Front Bumper is built for drivers who don’t hold back. With a full 6 inches of durable protection, this upgrade guards your chassis during head-on impacts and hard landings — perfect for bashing, racing, or rough terrain adventures. ✅ Features: 📏 6-inch width for maximum front-end coverage 🧱 High-strength RPM nylon absorbs big hits without cracking 🏁 Reinforced ribs double as skid rails for gliding over obstacles 🛬 Extra protection from hard landings and crash damage ⚙️ Direct fit for popular Associated models with no hassle 📦 Includes: (1) RPM Extra Wide Front Bumper (Black) 📊 Specifications: Material: RPM nylon composite Width: 6 in Color: Black Compatibility: Fits vehicles using Associated bulkheads #91359, #91364, or #9562 Compatible Models: Team Associated Trophy Rat Pro2 RT10SW RB10 B5 T5 Whether you bash or race, the RPM Extra Wide Front Bumper adds serious protection where it counts. Don’t just survive impacts — dominate them. 💥

Read more less

RPM Front A-Arm Set (Multiple Colors)PART #: RPM80242Fits: Traxxas Slash 2WD, Nitro Slash, Electric Rustler & Stampede 2WD Upgrade your front suspension with RPM’s legendary Front A-Arms, engineered for durability, reduced weight, and better performance across any terrain. Designed as a direct replacement for stock arms, these A-arms are nearly 25% lighter, yet significantly stronger and more flexible under impact. They’re molded from RPM’s exclusive nylon blend and backed by RPM’s unbeatable breakage warranty. Key Features: Stronger than stock: Resists flex and breakage even under heavy abuse Lightweight design: Up to 25% lighter than factory arms Improved ground clearance: Angled edges help your car glide over obstacles Increased droop travel: Compatible with RPM oversized bearing carriers (RPM80372 & RPM80382) Enhanced handling: Maintains rigidity for consistent suspension geometry Colors Available: Black Blue Green Red Includes:(2) Front A-Arms Compatibility: Traxxas Slash 2WD Traxxas Nitro Slash Traxxas Electric Rustler Traxxas Electric Stampede 2WD

Read more less

The RPM Front Bumper & Skid Plate for the Traxxas Slash 4x4 features a rugged three-piece design that delivers maximum protection for bashers while giving racers the flexibility to reduce weight when needed. Built with RPM’s impact-absorbing materials, this system provides serious front-end durability without sacrificing performance or style. The modular design allows you to run full bumper and skid protection for maximum crash resistance, or remove the bumper and run only the skid plate mount and skid plate for a lightweight racing setup—shedding approximately 27 grams from the front of the truck. Key Features Three-piece modular bumper and skid plate design Full bash protection or lightweight race configuration Impact-absorbing RPM construction Eliminates stock bumper support ring and hardware Reduces transfer of impact energy to differential housing Thicker skid design for improved durability Includes longer mounting screws for increased strength Benefits Helps absorb frontal impacts and reduce chassis damage Reduces stress transferred into the differential housing Easy conversion between bashing and racing setups Strong, durable, and lightweight design Compatibility Traxxas Slash 4x4 A durable, race-ready front-end upgrade that delivers RPM toughness with the flexibility to match your driving style. 🏁

Read more less

Upgrade your suspension with RPM’s high-performance A-arms for the Traxxas Slash and Stampede 4x4! These arms are a game-changer — lighter, stronger, and far more precise than stock. Features: Eliminates slop in the suspension system Tightens tolerances around hinge pins by over 90% Reduces unwanted fore/aft movement for better stability Drops 6.5g per A-arm — nearly 1 oz weight savings per truck! Reinforced bosses for shock and sway bar mounting Iconic RPM styling with 30° leading/trailing edges Molded from RPM’s legendary ultra-durable nylon Available in Black, Red, Green, or Blue Note: Each package includes 1 left and 1 right A-arm Two packages are required to complete one full truck (front and rear) Rear A-arms do not support the upper hinge pin hole of aftermarket axle carriers Proudly made in the USA.

Read more less

Skid Plate Overview:The RPM Front Skid Plate adds critical front-end protection to your Team Associated Rival MT10 or Pro4 SC10. Designed to shield vulnerable steering components, it helps reduce damage from impacts while maintaining steering performance. 🏁 About the Front Skid Plate 💪 Heavy-Duty Protection Molded from RPM’s proprietary engineering-grade nylon, this skid plate is built to absorb impacts and protect key components like the servo and bellcrank during hard driving. 🔧 Reinforced Design Reinforced support structures help reduce flex under heavy hits, keeping your steering more consistent even after rough landings and collisions. ⚙️ Flexible Setup The removable servo/bellcrank cover allows you to run lightweight for racing or install it for added protection during bashing. 🔧 Key Features ✔ Durable nylon construction for impact resistance✔ Protects servo and bellcrank components✔ Reinforced design reduces flex✔ Removable cover for versatility✔ Made in the USA✔ Backed by RPM limited lifetime warranty 📦 Includes (1) Front Skid Plate 🚗 Compatibility Team Associated Rival MT10 Team Associated Pro4 SC10 Built for drivers who push their trucks hard, this RPM skid plate delivers reliable protection and durability where it matters most.  

Read more less

Serious truck. Serious protection. The RPM Front Upper Bumper Mount is engineered to handle the brutal impacts that come with running the Traxxas X-Maxx hard. Designed as a heavy-duty upgrade over the stock small beam supports, this mount replaces them with oversized rectangular beams for dramatically increased strength and durability. Built with RPM’s signature impact-resistant design, the curved beam structure adds controlled flexibility to help absorb and dissipate energy from hard landings, nose-down crashes, and full-send bashing sessions. Instead of transferring impact directly into the chassis, this mount helps spread the load and reduce damage potential. If you’re pushing your X-Maxx to its limits, this is a smart durability upgrade that adds confidence every time you pull the trigger. Features: Replaces small beam supports with oversized rectangular beams Curved beam design improves impact absorption Flexible construction helps dissipate crash energy Ultra-strong build for extreme bashing Direct replacement upgrade Includes: (1) Front Upper Bumper Mount Built for bashers who don’t back off the throttle.

Read more less

When strength matters, RPM delivers. These Heavy Duty Front A-Arms are a direct replacement for the stock arms on your Losi Mini-T 2.0 or Mini-B, but with a serious upgrade in durability. Built from RPM’s legendary engineering-grade nylon, they’re 25% thicker in the hinge pin boss and feature beefed-up support beams to protect your shock pivots from damage. 💪 Features: Front inner hinge pin boss is ~25% thicker than stock Overall arm thickness increased by ~25% Support beams are up to 50% thicker for better impact resistance Designed to take the hit before your shock pivot does Made from RPM’s ultra-durable nylon blend 📦 Includes:(1) Set of Heavy Duty Front A-Arms – Black ✅ Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

RPM Hybrid Gearbox Housing & Rear Mounts (Black)PART #: RPM73612 Upgrade your Traxxas 2WD vehicle with the RPM Hybrid Gearbox Housing and Rear Mounts — engineered for unmatched strength, heat dissipation, and long-term durability. This hybrid setup combines a CNC-machined aluminum motor plate with RPM’s signature ultra-tough molded nylon housing and rear mounts, delivering a rugged solution for racers and bashers alike. Fits: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Bandit Traxxas Stampede 2WD Key Features:Aluminum Motor Plate: 3mm thick 6061 T6 aluminum plate Locks in gear mesh for consistent settings Helps dissipate motor heat Not integrated into bumper mounts — no flex on rear impacts Molded Gearbox Housing: Made from RPM’s bulletproof nylon blend Fully enclosed design keeps debris out Compatible with stock motor cover Eliminates bottom hole from stock housing for cleaner internals Quieter operation than stock Rear Mounts (0° and 3° Included): Two sets of rear mounts included: 0° and 3° toe-in Easily serviceable—no need to remove the entire transmission Molded for tight tolerances with minimal suspension slop What’s Included: Hybrid gearbox housing 0° and 3° rear A-arm mounts 3mm aluminum motor plate Mounting hardware and instructions Tech Notes: Internal transmission components (gears, bearings, shafts) not included — transfer these from your stock setup. Replaces Traxxas #3691 and #3691A. Minor trimming of stock A-arms may be needed; no issues with RPM rear arms.

Read more less

RPM No-Clip Body Mounts – Slash 2WDPART #: RPM70860 Tired of losing body clips or ruining the scale look of your Slash 2WD with oversized body posts? RPM has the perfect solution: the RPM No-Clip Body Mount System, designed specifically for the Traxxas Slash 2WD. This innovative setup eliminates through-the-body posts entirely and replaces them with a scale mock radiator and concealed locking mechanism. It doesn’t just work well—it looks awesome too. The detailed radiator and faux fan shrouds lock your body into place without sacrificing aesthetics. Key Features: Completely eliminates body clips for a clean, scale look Innovative lock system: hidden rear latch + under-body front frame Ultra-scale realism with molded radiator and fan setup Adjustable height: drop body up to 3/16” or raise it 3/8” from stock Durable: Made in the USA from RPM’s bulletproof engineering-grade nylon Easy to install: Comes complete with everything you need Compatibility Notes: Fits most stock Traxxas Slash 2WD bodies NOT compatible with Ford Raptor, Rob MacCachren Dodge, Dakar, or Nitro Slash bodies NOT compatible with Traxxas On-Board Audio (OBA) system Includes: (1) Front Under-Body Mount Assembly (1) Rear Radiator Lock Assembly Mounting Hardware & Instructions Give your Slash the ultimate scale upgrade with RPM's No-Clip Body Mount System. Form meets function—no clips required.  

Read more less

  RPM Rear A-Arm Set (Multiple Colors)PART #: RPM80592–80599Fits: Traxxas Slash 2WD Take your Traxxas Slash 2WD to the next level with these ultra-durable RPM Rear A-Arms, designed to withstand the most punishing bashing sessions. Made from RPM’s exclusive ultra-tough nylon blend, these A-arms provide superior impact resistance, reduced flex, and precise suspension geometry — all while being lighter than stock components. Pair them with RPM Front A-Arms (RPM80244) for a consistent performance upgrade and clean, uniform look. Available in a variety of colors including black, blue, green, red, and more to match your style. Key Features: Unmatched durability from RPM's legendary nylon blend Crash-resistant design made to absorb the worst landings Lighter than stock for better suspension response Perfect color match with RPM front A-arms for a complete custom look Backed by RPM’s limited lifetime warranty Colors Available: Black Blue Green Red Others (based on inventory) Includes:(2) Rear A-Arms Compatibility: Traxxas Slash 2WD

Read more less

RPM Rear Bumper for Traxxas Slash 2WD – Built to Take a Hit Built for Bashers. Ready for Impact.The RPM Rear Bumper for Traxxas Slash 2WD isn’t just tough — it’s molded from RPM’s legendary blend of ultra-durable plastic for rear-end protection you can trust. ✅ 18% lighter than stock – because lighter = faster✅ Scale short course look – wide, flat, and aggressive✅ Mud flap ready – pre-drilled for RPM’s #81012 flaps✅ Includes hardware & instructions – install and go This bumper stops rear impacts in their tracks and looks like it belongs on a real Baja truck. Available in multiple color options to match your build. 💥 Protect your Slash. Stay race-ready.  

Read more less

  Upgrade your X-Maxx with the strongest rear axle carriers on the market. RPM’s Oversized Rear Axle Carriers solve the two biggest problems X-Maxx owners face: broken carriers and blown inner bearings. RPM engineered these to take extreme abuse, adding massive support ribs and beefed-up geometry for unmatched durability. The real game-changer?Huge oversized inner bearings.RPM replaces the tiny stock 20×27×4mm bearings with massive 20×32×7mm bearings—over 300% stronger in static and dynamic load ratings. That means smoother running, longer bearing life, and way less maintenance. If you bash your X-Maxx hard, these are a must-have upgrade. Features Extreme-duty RPM nylon construction for unmatched durability Oversized 20×32×7mm inner bearings (included) Nearly 300% stronger load rating vs. stock bearings Beefy support rib design to prevent carrier failure Direct fit upgrade for Traxxas 7752 carriers Backed by RPM’s renowned limited lifetime warranty Includes (1) Left Oversized Rear Axle Carrier (1) Right Oversized Rear Axle Carrier (2) Oversized inner bearings (20×32×7mm) Note: Outer bearings are not included (use Traxxas 5106 / 5106A).  

Read more less

  RPM Traxxas X-Maxx Upper & Lower A-Arms (Black) (2) – RPM82352 Upgrade your Traxxas X-Maxx with the durability and performance of RPM Upper & Lower A-Arms. Designed to take on extreme terrain and the X-Maxx’s massive weight, these arms feature reinforced construction inspired by RPM’s proven 1/5-scale Baja A-arm designs. Key Features: Ultra-strong design to handle extreme bashing Double support beams on lower arms for impact energy distribution Improved ground clearance over stock arms Universal fit – works on any corner of the X-Maxx Molded from RPM’s legendary engineering-grade nylon Made in the USA Backed by RPM’s limited lifetime warranty Fitment Notes: Replaces Traxxas TRA7729 (upper), TRA7730 & TRA7731 (lower) Includes (1) Upper and (1) Lower A-Arm Requires 4 packages to fully outfit one truck Built for brutal terrain and heavy hits—RPM arms mean fewer repairs and more track time.

Read more less

Add serious front-end protection and a wider stance with the RPM Wide Front Bumper, designed for Traxxas ST 4X4 platforms. Molded from RPM’s legendary blend of engineering-grade nylon, this bumper is built to absorb hard impacts while protecting critical front-end components during aggressive bashing and racing. The wider design offers increased coverage compared to stock bumpers, helping shield suspension and chassis components without sacrificing approach angle or durability. Features: Wide design for increased front-end protection Helps absorb impacts and reduce crash damage Molded from RPM’s ultra-durable nylon material Flexible yet extremely impact-resistant Designed for aggressive bashing and racing Compatibility: Traxxas Rustler 4x4 Traxxas Stampede 4x4 Traxxas Telluride 4x4 Includes: (1) Wide Front Bumper Color: BlackPart Number: RPM81042

Read more less

Built for bashers, this RPM Wide Front Bumper delivers serious protection for your Losi Mini-T 2.0 or Mini-B. Measuring 3.5 inches across, it’s designed to be the first point of contact in a crash—shielding your front end, wheels, and chassis from damage. Whether you're racing or bashing, this is essential gear. 🛡️ Features: 3.5" wide design protects wheels and chassis Extended rear plate shields the aluminum chassis plate Durable RPM engineering-grade nylon construction Easy install, direct fit upgrade 📦 Includes:(1) Wide Front Bumper 🚫 Note:Not compatible with the original Losi Mini-T (use RPM73532 instead) ✅ Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Small in size but big on performance, the SkyRC B6 Neo delivers serious charging power in an ultra-portable design. With up to 200W DC output and USB-C PD support, this smart charger is built for hobbyists who want flexibility, speed, and safety—whether at the track or on the bench. Designed to handle a wide range of battery chemistries, the B6 Neo also doubles as a compact power supply, making it a versatile tool for modern RC setups. Features & Benefits 200W DC charging power with up to 10A output USB-C PD dual input delivers up to 80W for added flexibility Ultra-compact design—approximately ¼ the size of previous models XT60 DC input and modern Type-C PD input Built-in balance port enables faster, more efficient discharging Up to 24W discharge when using balance port + main port Comprehensive safety protections for reliable, secure charging Clean, modern design with a durable plastic housing Performance Highlights High-power charging in a pocket-sized footprint Efficient battery management across multiple chemistries Ideal for racers, bashers, and bench setups needing portable power Includes (1) SkyRC B6 Neo 200W Smart Charger A compact, high-output charger designed for today’s RC demands—powerful, portable, and built with safety in mind.  

Read more less

⚙️ Precision. Consistency. Race-Ready Setup. Dial in your setup with confidence using the SkyRC Digital Ride Height Gauge—engineered for precise, repeatable measurements that turn every adjustment into real performance. With 0.1mm resolution and a wide 2–38mm range, this tool helps you fine-tune balance, grip, and handling across any track condition. ⚡ Features: 📏 High-precision digital measurement with 0.1mm resolution⚙️ Wide 2–38mm range for multiple RC platforms🧠 Onboard MCU for stable, consistent, and repeatable readings🔧 Slim 2mm measuring blade reaches tight and recessed areas🎯 Guided calibration system ensures accuracy every time🔄 180° rotating display for easy viewing at any angle🌐 Switchable units (mm/in) for convenience🏁 Compatible with 1/24 to 1/8 scale RC vehicles 📏 Specifications: Part Number: SKY-500049Measurement Range: 2–38mm (0.07–1.49in)Resolution: 0.1mmPower: AAA BatteryUnits: mm / inchesDimensions: 127.3 x 33 x 18mmWeight: 40g (1.41oz) 📦 Includes: (1) Digital Ride Height Gauge(1) Calibration Block(1) Manual 🔧 Compatibility: Works with 1/24, 1/18, 1/16, 1/14, 1/12, 1/10, and 1/8 scale RC vehicles 💡 Pro Tip: Set ride height consistently at all four corners before every race—small changes in millimeters can make a huge difference in grip, jump handling, and lap times.

Read more less

Keep your batteries in peak condition with the SkyRC NC1600, a compact and versatile charger/analyzer for AA and AAA NiMH/NiCD batteries. With multiple modes and smart charging technology, it’s the perfect tool for racers and hobbyists who demand reliable battery performance. ✅ Wide Compatibility – Works with both AA & AAA NiMH/NiCD batteries✅ Multiple Functions – Charge, discharge, and refresh modes keep your batteries healthy✅ Smart Charging – Adapts output based on power source for efficient charging✅ Compact & Lightweight – Easy to carry to races or keep on your workbench✅ User-Friendly Design – Clear interface and safe operation Specifications: Dimensions: 108 × 79 × 32.9mm Weight: 114g Input Power: 15W QC3.0 / PD 5V 3.0A / 5V 2.1A Battery Type: NiMH/NiCD (AA/AAA) Charge Rate:• 1600mA/slot (up to 3 batteries @15W QC3.0/PD 5V 3A)• 1500mA/slot (4 batteries @15W QC3.0/PD 5V 3A)• 1600mA/slot (2 batteries @5V 2.1A)• 1000mA/slot (4 batteries @5V 2.1A) Discharge Rate: 100–700mA Trickle Charge Rate: 30–70mA Cut-Off Voltage: 0.9V Capacity Protection: 3000mAh Operating Temp: 0–40°C Storage Temp: -10–70°C Package Includes: (1) SkyRC NC1600 Battery Charger & Analyzer Keep your AA/AAA batteries fresh, balanced, and race-ready with the SkyRC NC1600 — the perfect balance of power, portability, and precision.    

Read more less

Power, Protection, and Performance – All in One Smart Package The Spektrum Smart G2 2200mAh 4S LiPo takes the hassle out of battery maintenance with built-in intelligence, a balance-lead-free design, and automatic storage discharge. This compact powerhouse is perfect for aircraft and other high-performance RC models requiring reliable 4S power in a rugged, intelligent format. ⚙️ Features: ✅ No Balance Lead Required – Charges and balances through IC3® connector ⚡ 50C Discharge Rate – High power output for serious performance 🧠 Smart G2 Technology – Internal chip stores charge data, cycle count, health, and more 🔋 Auto-Storage Mode – Automatically discharges to 3.90V after 72 hours of inactivity 🧱 Hard Case with Metal Side Plates – Added protection and better cooling 🔄 Faster Storage Discharge – Up to 1.5A for quicker transitions 🔌 IC3® Connector – Compatible with EC3™ and all Smart chargers 📐 Specifications: Voltage: 14.8V (4S) Capacity: 2200mAh Discharge Rate: 50C Charge Rate: 5A Max Connector Type: IC3® Balance Connector: Smart G2 (internal) Dimensions: 4.96 x 1.33 x 1.08 in (126 x 34 x 27 mm) Weight: 9.17 oz (260g) Wire Gauge: 12 AWG Application: Aircraft, compatible RC vehicles ✅ Compatibility: ✈️ E-flite F-14 Tomcat ✈️ E-flite F4U-4 Corsair 1.2m ✈️ E-flite RV-7 1.1m ⚠️ Requires a Spektrum G2 Smart Charger or updated G1 charger with G2 support. 📦 Get smart with your power – plug in, fly, and let the battery do the thinking.

Read more less

Spektrum 3S 1300mAh 50C Smart LiPo Battery – IC3 Connector Intelligent Power with Built-In Safety & Simplicity Upgrade your setup with the Spektrum 3S Smart LiPo Battery, offering 1300mAh of high-performance power and the cutting-edge convenience of Smart technology. With an integrated microchip, this battery stores vital data and communicates directly with Spektrum Smart chargers — making charging safer and easier than ever. Perfect for planes, boats, and crawlers that need compact power without the hassle. ⚙️ Features: 🔌 IC3 Connector – Smart-compatible and EC3 backward-compatible 🧠 Integrated Smart Microchip – Automatically sets charge preferences and logs performance data 🔋 Self-Discharge to Storage Voltage – Automatically maintains battery health 🔧 Simplified Charging – Just plug in and press start on a Smart charger 💡 Real-Time Battery Health Monitoring – Know cell voltage, cycles, temperature & more 📐 Specifications: Voltage: 11.1V (3S) Capacity: 1300mAh Battery Type: Smart LiPo Connector Type: IC3 Cell Count: 3S (3.7V/cell) Smart Discharge: Yes Application: Airplanes, Boats, RC Crawlers ✅ Compatibility: Axial SCX10 Pro E-flite Habu SS 50mm E-flite Slow Ultra Stick HobbyZone AeroScout S HobbyZone Apprentice S 2 Pro Boat Power Boat Racer Deep V Pro Boat Recoil 2 18 ⚠️ Charging Note: Use only Spektrum Smart Chargers to safely charge this battery. Do not use non-Smart chargers. Give your RC models smarter power and worry-free charging with Spektrum Smart LiPo technology.

Read more less

Spektrum 3S 6800mAh 120C Smart G2 Pro Basher LiPo Battery – IC5 Connector Pro-Level Power for Hardcore Bashers Engineered for extreme performance and durability, the Spektrum Smart G2 Pro Basher 6800mAh LiPo is built to push the limits of your RC. Featuring advanced Graphene LiPo chemistry, ultra-high discharge rates, and Smart technology, this battery delivers the punch, capacity, and safety features bashers demand. Housed in a rugged hardcase and equipped with an IC5 connector, this 3S battery brings consistent, long-lasting power to 1/8 and 1/10 scale monster trucks, truggies, and speed builds. ⚙️ Features: ⚡ 120C Burst Discharge Rate – Delivers intense acceleration and sustained performance 🔋 6800mAh Capacity – Longer run times with massive punch 🧠 Integrated Smart Microchip – Stores battery data and automates charging with Smart chargers 🔧 No Balance Lead Required – Charge through IC5 only 🏁 Graphene LiPo Technology – Lower IR, cooler temps, and greater durability 🧱 Toughened Hardcase – Built to withstand hardcore bashing 🔌 IC5 Connector – Compatible with EC5 systems 📐 Specifications: Voltage: 11.1V (3S) Capacity: 6800mAh Discharge Rate: 120C Battery Type: Smart G2 Graphene LiPo Connector Type: IC5 Smart Balance: Built-in (no separate lead) Configuration: 3S1P Application: Surface – Bashers, Speed Builds, Monster Trucks Case Type: Hardcase Technology: Smart G2, Graphene Charger Required: Spektrum™ G2 Smart Charger ⚠️ Note: For safe and optimal use, this battery must be charged with a Spektrum Smart G2-compatible charger. Dominate the dirt. Control the chaos. Power your passion with Spektrum Pro Basher Smart G2.

Read more less

Spektrum 4S 10000mAh 120C Smart G2 Pro Basher LiPo Battery – IC5 Insane Capacity. Brutal Power. Built for Bashers. The Spektrum Smart G2 Pro Basher 4S 10000mAh 120C LiPo is a monster pack built for high-demand RC bashers who crave extreme power and runtime. Featuring Graphene LiPo technology and Smart G2 integration, this battery delivers unmatched punch, durability, and intelligent battery management—all in a rugged hardcase. Ideal for 1/5 and 1/6 scale platforms, the massive 10000mAh capacity ensures longer sessions and fewer pit stops, while the 120C discharge rate unleashes relentless acceleration and torque. ⚙️ Features: 🔋 Huge 10000mAh Capacity – For extended runtime on large-scale platforms ⚡ 120C Discharge Rate – Delivers brutal acceleration and sustained power 🧠 Smart G2 Technology – Auto storage, battery data, and safety built-in 🔌 IC5 Connector – Compatible with IC5/EC5 systems for high current delivery 🧱 Hardcase Construction – Tough exterior built to handle abuse ⚙️ Graphene LiPo Chemistry – Improved durability, cooler temps, and longer cycle life 📐 Specifications: Voltage: 14.8V (4S) Capacity: 10000mAh Discharge Rate: 120C Battery Type: Graphene Smart G2 LiPo Connector: IC5 Cell Count: 4S (3.7V per cell) Smart Tech: Yes (G2 - requires Smart G2 charger) Application: Large-scale bashing (1/5–1/6 scale) Hard Case: Yes ⚠️ Note: G2 batteries require a Spektrum™ G2 Smart Charger or earlier Smart Charger with G2 firmware update. Take your bashing to the next level—with next-gen performance, protection, and power from Spektrum Smart G2.

Read more less

Spektrum 6" IC3 Battery to IC2 Device Adapter – SPMXCA320Charge Your IC2 Smart Batteries with Ease This 6-inch adapter lets you connect a Spektrum Smart Battery with an IC2 connector to a charger or device with an IC3 connector. It's the perfect solution for charging smaller Spektrum Smart batteries using standard IC3-based chargers. ⚠️ Note: Spektrum IC2 connectors and charge leads are NOT compatible with EC2 connectors. ✅ Adapts an IC2 battery to an IC3 device✅ Ideal for charging Spektrum Smart batteries with IC2 connectors✅ 6-inch flexible wire for convenience and reach✅ High-quality Spektrum construction for safe, reliable connections 📦 Specifications: Part Number: SPMXCA320 Length: 6 inches Connector 1: IC3 (Device/Charger Side) Connector 2: IC2 (Battery Side) Application: Battery charging and connectivity Whether you're flying micro aircraft or running small-scale vehicles, this adapter is a must-have for ensuring your IC2 Smart batteries are easily and safely charged with your existing setup.  

Read more less

Connect your EC2-equipped batteries to IC2-equipped devices safely and easily with this official Spektrum IC2 Device / EC2 Battery Adapter. Designed for reliability and proper fitment, this adapter ensures secure power transfer when using mixed-connector equipment. IMPORTANT:Spektrum IC2 connectors and EC2 connectors are NOT cross-compatible without an adapter. This adapter is required when connecting EC2 batteries to IC2 devices. Key Features Converts EC2 battery → IC2 device Ensures safe, proper electrical connection High-quality Spektrum construction Ideal for chargers, small-scale vehicles, and Smart-ready equipment using IC2 Eliminates the risk of forcing incompatible connectors Includes (1) Spektrum IC2 Device to EC2 Battery Adapter – SPMXCA321  

Read more less

Spektrum Firma Brushless Motor / ESC / Receiver Combo, 4500Kv: NASCARPART: SPMXSEMC25 The Spektrum™ Firma™ Smart Brushless Combo delivers cutting-edge performance and telemetry in one sleek package — perfect for the 1/12th Scale Losi NASCAR AWD and other compact RC platforms. With a 4500Kv brushless motor, integrated Smart telemetry ESC, and SR215 DSMR receiver, this combo is built for racers demanding responsive control, powerful acceleration, and worry-free durability. Features: All-in-one Smart telemetry system with no additional modules required Waterproof ESC with multiple programming options (button, USB, or programming box) Advanced 32-bit ARM M4 processor for precise performance High-quality 4-pole 4500Kv motor with CNC aluminum housing Hardened 2.3mm alloy steel output shaft and precision ball bearings Adjustable high-current BEC (6V @ 2A) Over-current, low-voltage, thermal, and failsafe protection Built-in aluminum heat sink for efficient cooling Compact SR215 receiver with DSMR technology for fast and reliable signal Bind-button eliminates the need for a bind plug IC2 connector compatible with Spektrum Smart Batteries Supports 2S–3S LiPo battery setups Ideal for surface racers who want maximum drivability and plug-and-play Smart convenience in a compact package. Drop it in and dominate the track.  

Read more less

Easily connect your power system with the Spektrum IC3 to JST Adapter, designed to link IC3 batteries to JST-equipped devices. This compact adapter provides a simple plug-and-play solution for running smaller electronics without modifying your wiring. Featuring a female IC3 connector to female JST connector, this adapter ensures a secure and reliable connection while keeping your setup clean and efficient. 🔧 Features:• Converts IC3 battery connection to JST device• Female IC3 to female JST configuration• Compact, easy-to-use plug-and-play design• Reliable connection for consistent power delivery• No soldering required 📦 Includes:• (1) IC3 to JST Adapter ⚙️ Specifications:• Connector Type: IC3 (Female) to JST (Female) ✅ Compatibility:• E-flite UMX Cirrus SR22• E-flite UMX Citation Longitude• E-flite UMX Conscendo• E-flite UMX P-51D• E-flite UMX P-51D Voodoo• E-flite UMX Pitts S-1S• E-flite UMX Timber X Keep your setup flexible and ready to run with the Spektrum IC3 to JST adapter, making it easy to power JST-equipped models from IC3 batteries.    

Read more less